| /* -*- linux-c -*- ------------------------------------------------------- * |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright 2007 rPath, Inc. - All Rights Reserved |
| * Copyright 2009 Intel Corporation; author H. Peter Anvin |
| * |
| * This file is part of the Linux kernel, and is made available under |
| * the terms of the GNU General Public License version 2. |
| * |
| * ----------------------------------------------------------------------- */ |
| |
| /* |
| * Common all-VGA modes |
| */ |
| |
| #include "boot.h" |
| #include "video.h" |
| |
| static struct mode_info vga_modes[] = { |
| { VIDEO_80x25, 80, 25, 0 }, |
| { VIDEO_8POINT, 80, 50, 0 }, |
| { VIDEO_80x43, 80, 43, 0 }, |
| { VIDEO_80x28, 80, 28, 0 }, |
| { VIDEO_80x30, 80, 30, 0 }, |
| { VIDEO_80x34, 80, 34, 0 }, |
| { VIDEO_80x60, 80, 60, 0 }, |
| }; |
| |
| static struct mode_info ega_modes[] = { |
| { VIDEO_80x25, 80, 25, 0 }, |
| { VIDEO_8POINT, 80, 43, 0 }, |
| }; |
| |
| static struct mode_info cga_modes[] = { |
| { VIDEO_80x25, 80, 25, 0 }, |
| }; |
| |
| static __videocard video_vga; |
| |
| /* Set basic 80x25 mode */ |
| static u8 vga_set_basic_mode(void) |
| { |
| struct biosregs ireg, oreg; |
| u16 ax; |
| u8 rows; |
| u8 mode; |
| |
| initregs(&ireg); |
| |
| #ifdef CONFIG_VIDEO_400_HACK |
| if (adapter >= ADAPTER_VGA) { |
| ireg.ax = 0x1202; |
| ireg.bx = 0x0030; |
| intcall(0x10, &ireg, NULL); |
| } |
| #endif |
| |
| ax = 0x0f00; |
| intcall(0x10, &ireg, &oreg); |
| mode = oreg.al; |
| |
| set_fs(0); |
| rows = rdfs8(0x484); /* rows minus one */ |
| |
| #ifndef CONFIG_VIDEO_400_HACK |
| if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) && |
| (rows == 0 || rows == 24)) |
| return mode; |
| #endif |
| |
| if (mode != 3 && mode != 7) |
| mode = 3; |
| |
| /* Set the mode */ |
| ireg.ax = mode; /* AH=0: set mode */ |
| intcall(0x10, &ireg, NULL); |
| do_restore = 1; |
| return mode; |
| } |
| |
| static void vga_set_8font(void) |
| { |
| /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */ |
| struct biosregs ireg; |
| |
| initregs(&ireg); |
| |
| /* Set 8x8 font */ |
| ireg.ax = 0x1112; |
| /* ireg.bl = 0; */ |
| intcall(0x10, &ireg, NULL); |
| |
| /* Use alternate print screen */ |
| ireg.ax = 0x1200; |
| ireg.bl = 0x20; |
| intcall(0x10, &ireg, NULL); |
| |
| /* Turn off cursor emulation */ |
| ireg.ax = 0x1201; |
| ireg.bl = 0x34; |
| intcall(0x10, &ireg, NULL); |
| |
| /* Cursor is scan lines 6-7 */ |
| ireg.ax = 0x0100; |
| ireg.cx = 0x0607; |
| intcall(0x10, &ireg, NULL); |
| } |
| |
| static void vga_set_14font(void) |
| { |
| /* Set 9x14 font - 80x28 on VGA */ |
| struct biosregs ireg; |
| |
| initregs(&ireg); |
| |
| /* Set 9x14 font */ |
| ireg.ax = 0x1111; |
| /* ireg.bl = 0; */ |
| intcall(0x10, &ireg, NULL); |
| |
| /* Turn off cursor emulation */ |
| ireg.ax = 0x1201; |
| ireg.bl = 0x34; |
| intcall(0x10, &ireg, NULL); |
| |
| /* Cursor is scan lines 11-12 */ |
| ireg.ax = 0x0100; |
| ireg.cx = 0x0b0c; |
| intcall(0x10, &ireg, NULL); |
| } |
| |
| static void vga_set_80x43(void) |
| { |
| /* Set 80x43 mode on VGA (not EGA) */ |
| struct biosregs ireg; |
| |
| initregs(&ireg); |
| |
| /* Set 350 scans */ |
| ireg.ax = 0x1201; |
| ireg.bl = 0x30; |
| intcall(0x10, &ireg, NULL); |
| |
| /* Reset video mode */ |
| ireg.ax = 0x0003; |
| intcall(0x10, &ireg, NULL); |
| |
| vga_set_8font(); |
| } |
| |
| /* I/O address of the VGA CRTC */ |
| u16 vga_crtc(void) |
| { |
| return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; |
| } |
| |
| static void vga_set_480_scanlines(void) |
| { |
| u16 crtc; /* CRTC base address */ |
| u8 csel; /* CRTC miscellaneous output register */ |
| |
| crtc = vga_crtc(); |
| |
| out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ |
| out_idx(0x0b, crtc, 0x06); /* Vertical total */ |
| out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ |
| out_idx(0xea, crtc, 0x10); /* Vertical sync start */ |
| out_idx(0xdf, crtc, 0x12); /* Vertical display end */ |
| out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ |
| out_idx(0x04, crtc, 0x16); /* Vertical blank end */ |
| csel = inb(0x3cc); |
| csel &= 0x0d; |
| csel |= 0xe2; |
| outb(csel, 0x3c2); |
| } |
| |
| static void vga_set_vertical_end(int lines) |
| { |
| u16 crtc; /* CRTC base address */ |
| u8 ovfw; /* CRTC overflow register */ |
| int end = lines-1; |
| |
| crtc = vga_crtc(); |
| |
| ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); |
| |
| out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ |
| out_idx(end, crtc, 0x12); /* Vertical display end */ |
| } |
| |
| static void vga_set_80x30(void) |
| { |
| vga_set_480_scanlines(); |
| vga_set_vertical_end(30*16); |
| } |
| |
| static void vga_set_80x34(void) |
| { |
| vga_set_480_scanlines(); |
| vga_set_14font(); |
| vga_set_vertical_end(34*14); |
| } |
| |
| static void vga_set_80x60(void) |
| { |
| vga_set_480_scanlines(); |
| vga_set_8font(); |
| vga_set_vertical_end(60*8); |
| } |
| |
| static int vga_set_mode(struct mode_info *mode) |
| { |
| /* Set the basic mode */ |
| vga_set_basic_mode(); |
| |
| /* Override a possibly broken BIOS */ |
| force_x = mode->x; |
| force_y = mode->y; |
| |
| switch (mode->mode) { |
| case VIDEO_80x25: |
| break; |
| case VIDEO_8POINT: |
| vga_set_8font(); |
| break; |
| case VIDEO_80x43: |
| vga_set_80x43(); |
| break; |
| case VIDEO_80x28: |
| vga_set_14font(); |
| break; |
| case VIDEO_80x30: |
| vga_set_80x30(); |
| break; |
| case VIDEO_80x34: |
| vga_set_80x34(); |
| break; |
| case VIDEO_80x60: |
| vga_set_80x60(); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Note: this probe includes basic information required by all |
| * systems. It should be executed first, by making sure |
| * video-vga.c is listed first in the Makefile. |
| */ |
| static int vga_probe(void) |
| { |
| static const char *card_name[] = { |
| "CGA/MDA/HGC", "EGA", "VGA" |
| }; |
| static struct mode_info *mode_lists[] = { |
| cga_modes, |
| ega_modes, |
| vga_modes, |
| }; |
| static int mode_count[] = { |
| sizeof(cga_modes)/sizeof(struct mode_info), |
| sizeof(ega_modes)/sizeof(struct mode_info), |
| sizeof(vga_modes)/sizeof(struct mode_info), |
| }; |
| |
| struct biosregs ireg, oreg; |
| |
| initregs(&ireg); |
| |
| ireg.ax = 0x1200; |
| ireg.bl = 0x10; /* Check EGA/VGA */ |
| intcall(0x10, &ireg, &oreg); |
| |
| #ifndef _WAKEUP |
| boot_params.screen_info.orig_video_ega_bx = oreg.bx; |
| #endif |
| |
| /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ |
| if (oreg.bl != 0x10) { |
| /* EGA/VGA */ |
| ireg.ax = 0x1a00; |
| intcall(0x10, &ireg, &oreg); |
| |
| if (oreg.al == 0x1a) { |
| adapter = ADAPTER_VGA; |
| #ifndef _WAKEUP |
| boot_params.screen_info.orig_video_isVGA = 1; |
| #endif |
| } else { |
| adapter = ADAPTER_EGA; |
| } |
| } else { |
| adapter = ADAPTER_CGA; |
| } |
| |
| video_vga.modes = mode_lists[adapter]; |
| video_vga.card_name = card_name[adapter]; |
| return mode_count[adapter]; |
| } |
| |
| static __videocard video_vga = { |
| .card_name = "VGA", |
| .probe = vga_probe, |
| .set_mode = vga_set_mode, |
| }; |