| /* |
| * Handle unaligned accesses by emulation. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * |
| * This file contains exception handler for address error exception with the |
| * special capability to execute faulting instructions in software. The |
| * handler does not try to handle the case when the program counter points |
| * to an address not aligned to a word boundary. |
| * |
| * Putting data to unaligned addresses is a bad practice even on Intel where |
| * only the performance is affected. Much worse is that such code is non- |
| * portable. Due to several programs that die on MIPS due to alignment |
| * problems I decided to implement this handler anyway though I originally |
| * didn't intend to do this at all for user code. |
| * |
| * For now I enable fixing of address errors by default to make life easier. |
| * I however intend to disable this somewhen in the future when the alignment |
| * problems with user programs have been fixed. For programmers this is the |
| * right way to go. |
| * |
| * Fixing address errors is a per process option. The option is inherited |
| * across fork(2) and execve(2) calls. If you really want to use the |
| * option in your user programs - I discourage the use of the software |
| * emulation strongly - use the following code in your userland stuff: |
| * |
| * #include <sys/sysmips.h> |
| * |
| * ... |
| * sysmips(MIPS_FIXADE, x); |
| * ... |
| * |
| * The argument x is 0 for disabling software emulation, enabled otherwise. |
| * |
| * Below a little program to play around with this feature. |
| * |
| * #include <stdio.h> |
| * #include <sys/sysmips.h> |
| * |
| * struct foo { |
| * unsigned char bar[8]; |
| * }; |
| * |
| * main(int argc, char *argv[]) |
| * { |
| * struct foo x = {0, 1, 2, 3, 4, 5, 6, 7}; |
| * unsigned int *p = (unsigned int *) (x.bar + 3); |
| * int i; |
| * |
| * if (argc > 1) |
| * sysmips(MIPS_FIXADE, atoi(argv[1])); |
| * |
| * printf("*p = %08lx\n", *p); |
| * |
| * *p = 0xdeadface; |
| * |
| * for(i = 0; i <= 7; i++) |
| * printf("%02x ", x.bar[i]); |
| * printf("\n"); |
| * } |
| * |
| * Coprocessor loads are not supported; I think this case is unimportant |
| * in the practice. |
| * |
| * TODO: Handle ndc (attempted store to doubleword in uncached memory) |
| * exception for the R6000. |
| * A store crossing a page boundary might be executed only partially. |
| * Undo the partial store in this case. |
| */ |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/signal.h> |
| #include <linux/smp.h> |
| #include <linux/sched.h> |
| #include <linux/debugfs.h> |
| #include <linux/perf_event.h> |
| |
| #include <asm/asm.h> |
| #include <asm/branch.h> |
| #include <asm/byteorder.h> |
| #include <asm/cop2.h> |
| #include <asm/inst.h> |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| |
| #define STR(x) __STR(x) |
| #define __STR(x) #x |
| |
| enum { |
| UNALIGNED_ACTION_QUIET, |
| UNALIGNED_ACTION_SIGNAL, |
| UNALIGNED_ACTION_SHOW, |
| }; |
| #ifdef CONFIG_DEBUG_FS |
| static u32 unaligned_instructions; |
| static u32 unaligned_action; |
| #else |
| #define unaligned_action UNALIGNED_ACTION_QUIET |
| #endif |
| extern void show_registers(struct pt_regs *regs); |
| |
| static void emulate_load_store_insn(struct pt_regs *regs, |
| void __user *addr, unsigned int __user *pc) |
| { |
| union mips_instruction insn; |
| unsigned long value; |
| unsigned int res; |
| |
| perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0); |
| |
| /* |
| * This load never faults. |
| */ |
| __get_user(insn.word, pc); |
| |
| switch (insn.i_format.opcode) { |
| /* |
| * These are instructions that a compiler doesn't generate. We |
| * can assume therefore that the code is MIPS-aware and |
| * really buggy. Emulating these instructions would break the |
| * semantics anyway. |
| */ |
| case ll_op: |
| case lld_op: |
| case sc_op: |
| case scd_op: |
| |
| /* |
| * For these instructions the only way to create an address |
| * error is an attempted access to kernel/supervisor address |
| * space. |
| */ |
| case ldl_op: |
| case ldr_op: |
| case lwl_op: |
| case lwr_op: |
| case sdl_op: |
| case sdr_op: |
| case swl_op: |
| case swr_op: |
| case lb_op: |
| case lbu_op: |
| case sb_op: |
| goto sigbus; |
| |
| /* |
| * The remaining opcodes are the ones that are really of interest. |
| */ |
| case lh_op: |
| if (!access_ok(VERIFY_READ, addr, 2)) |
| goto sigbus; |
| |
| __asm__ __volatile__ (".set\tnoat\n" |
| #ifdef __BIG_ENDIAN |
| "1:\tlb\t%0, 0(%2)\n" |
| "2:\tlbu\t$1, 1(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tlb\t%0, 1(%2)\n" |
| "2:\tlbu\t$1, 0(%2)\n\t" |
| #endif |
| "sll\t%0, 0x8\n\t" |
| "or\t%0, $1\n\t" |
| "li\t%1, 0\n" |
| "3:\t.set\tat\n\t" |
| ".section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%1, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=&r" (value), "=r" (res) |
| : "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| regs->regs[insn.i_format.rt] = value; |
| break; |
| |
| case lw_op: |
| if (!access_ok(VERIFY_READ, addr, 4)) |
| goto sigbus; |
| |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| "1:\tlwl\t%0, (%2)\n" |
| "2:\tlwr\t%0, 3(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tlwl\t%0, 3(%2)\n" |
| "2:\tlwr\t%0, (%2)\n\t" |
| #endif |
| "li\t%1, 0\n" |
| "3:\t.section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%1, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=&r" (value), "=r" (res) |
| : "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| regs->regs[insn.i_format.rt] = value; |
| break; |
| |
| case lhu_op: |
| if (!access_ok(VERIFY_READ, addr, 2)) |
| goto sigbus; |
| |
| __asm__ __volatile__ ( |
| ".set\tnoat\n" |
| #ifdef __BIG_ENDIAN |
| "1:\tlbu\t%0, 0(%2)\n" |
| "2:\tlbu\t$1, 1(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tlbu\t%0, 1(%2)\n" |
| "2:\tlbu\t$1, 0(%2)\n\t" |
| #endif |
| "sll\t%0, 0x8\n\t" |
| "or\t%0, $1\n\t" |
| "li\t%1, 0\n" |
| "3:\t.set\tat\n\t" |
| ".section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%1, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=&r" (value), "=r" (res) |
| : "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| regs->regs[insn.i_format.rt] = value; |
| break; |
| |
| case lwu_op: |
| #ifdef CONFIG_64BIT |
| /* |
| * A 32-bit kernel might be running on a 64-bit processor. But |
| * if we're on a 32-bit processor and an i-cache incoherency |
| * or race makes us see a 64-bit instruction here the sdl/sdr |
| * would blow up, so for now we don't handle unaligned 64-bit |
| * instructions on 32-bit kernels. |
| */ |
| if (!access_ok(VERIFY_READ, addr, 4)) |
| goto sigbus; |
| |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| "1:\tlwl\t%0, (%2)\n" |
| "2:\tlwr\t%0, 3(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tlwl\t%0, 3(%2)\n" |
| "2:\tlwr\t%0, (%2)\n\t" |
| #endif |
| "dsll\t%0, %0, 32\n\t" |
| "dsrl\t%0, %0, 32\n\t" |
| "li\t%1, 0\n" |
| "3:\t.section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%1, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=&r" (value), "=r" (res) |
| : "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| regs->regs[insn.i_format.rt] = value; |
| break; |
| #endif /* CONFIG_64BIT */ |
| |
| /* Cannot handle 64-bit instructions in 32-bit kernel */ |
| goto sigill; |
| |
| case ld_op: |
| #ifdef CONFIG_64BIT |
| /* |
| * A 32-bit kernel might be running on a 64-bit processor. But |
| * if we're on a 32-bit processor and an i-cache incoherency |
| * or race makes us see a 64-bit instruction here the sdl/sdr |
| * would blow up, so for now we don't handle unaligned 64-bit |
| * instructions on 32-bit kernels. |
| */ |
| if (!access_ok(VERIFY_READ, addr, 8)) |
| goto sigbus; |
| |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| "1:\tldl\t%0, (%2)\n" |
| "2:\tldr\t%0, 7(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tldl\t%0, 7(%2)\n" |
| "2:\tldr\t%0, (%2)\n\t" |
| #endif |
| "li\t%1, 0\n" |
| "3:\t.section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%1, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=&r" (value), "=r" (res) |
| : "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| regs->regs[insn.i_format.rt] = value; |
| break; |
| #endif /* CONFIG_64BIT */ |
| |
| /* Cannot handle 64-bit instructions in 32-bit kernel */ |
| goto sigill; |
| |
| case sh_op: |
| if (!access_ok(VERIFY_WRITE, addr, 2)) |
| goto sigbus; |
| |
| value = regs->regs[insn.i_format.rt]; |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| ".set\tnoat\n" |
| "1:\tsb\t%1, 1(%2)\n\t" |
| "srl\t$1, %1, 0x8\n" |
| "2:\tsb\t$1, 0(%2)\n\t" |
| ".set\tat\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| ".set\tnoat\n" |
| "1:\tsb\t%1, 0(%2)\n\t" |
| "srl\t$1,%1, 0x8\n" |
| "2:\tsb\t$1, 1(%2)\n\t" |
| ".set\tat\n\t" |
| #endif |
| "li\t%0, 0\n" |
| "3:\n\t" |
| ".section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%0, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=r" (res) |
| : "r" (value), "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| break; |
| |
| case sw_op: |
| if (!access_ok(VERIFY_WRITE, addr, 4)) |
| goto sigbus; |
| |
| value = regs->regs[insn.i_format.rt]; |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| "1:\tswl\t%1,(%2)\n" |
| "2:\tswr\t%1, 3(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tswl\t%1, 3(%2)\n" |
| "2:\tswr\t%1, (%2)\n\t" |
| #endif |
| "li\t%0, 0\n" |
| "3:\n\t" |
| ".section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%0, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=r" (res) |
| : "r" (value), "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| break; |
| |
| case sd_op: |
| #ifdef CONFIG_64BIT |
| /* |
| * A 32-bit kernel might be running on a 64-bit processor. But |
| * if we're on a 32-bit processor and an i-cache incoherency |
| * or race makes us see a 64-bit instruction here the sdl/sdr |
| * would blow up, so for now we don't handle unaligned 64-bit |
| * instructions on 32-bit kernels. |
| */ |
| if (!access_ok(VERIFY_WRITE, addr, 8)) |
| goto sigbus; |
| |
| value = regs->regs[insn.i_format.rt]; |
| __asm__ __volatile__ ( |
| #ifdef __BIG_ENDIAN |
| "1:\tsdl\t%1,(%2)\n" |
| "2:\tsdr\t%1, 7(%2)\n\t" |
| #endif |
| #ifdef __LITTLE_ENDIAN |
| "1:\tsdl\t%1, 7(%2)\n" |
| "2:\tsdr\t%1, (%2)\n\t" |
| #endif |
| "li\t%0, 0\n" |
| "3:\n\t" |
| ".section\t.fixup,\"ax\"\n\t" |
| "4:\tli\t%0, %3\n\t" |
| "j\t3b\n\t" |
| ".previous\n\t" |
| ".section\t__ex_table,\"a\"\n\t" |
| STR(PTR)"\t1b, 4b\n\t" |
| STR(PTR)"\t2b, 4b\n\t" |
| ".previous" |
| : "=r" (res) |
| : "r" (value), "r" (addr), "i" (-EFAULT)); |
| if (res) |
| goto fault; |
| compute_return_epc(regs); |
| break; |
| #endif /* CONFIG_64BIT */ |
| |
| /* Cannot handle 64-bit instructions in 32-bit kernel */ |
| goto sigill; |
| |
| case lwc1_op: |
| case ldc1_op: |
| case swc1_op: |
| case sdc1_op: |
| /* |
| * I herewith declare: this does not happen. So send SIGBUS. |
| */ |
| goto sigbus; |
| |
| /* |
| * COP2 is available to implementor for application specific use. |
| * It's up to applications to register a notifier chain and do |
| * whatever they have to do, including possible sending of signals. |
| */ |
| case lwc2_op: |
| cu2_notifier_call_chain(CU2_LWC2_OP, regs); |
| break; |
| |
| case ldc2_op: |
| cu2_notifier_call_chain(CU2_LDC2_OP, regs); |
| break; |
| |
| case swc2_op: |
| cu2_notifier_call_chain(CU2_SWC2_OP, regs); |
| break; |
| |
| case sdc2_op: |
| cu2_notifier_call_chain(CU2_SDC2_OP, regs); |
| break; |
| |
| default: |
| /* |
| * Pheeee... We encountered an yet unknown instruction or |
| * cache coherence problem. Die sucker, die ... |
| */ |
| goto sigill; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| unaligned_instructions++; |
| #endif |
| |
| return; |
| |
| fault: |
| /* Did we have an exception handler installed? */ |
| if (fixup_exception(regs)) |
| return; |
| |
| die_if_kernel("Unhandled kernel unaligned access", regs); |
| force_sig(SIGSEGV, current); |
| |
| return; |
| |
| sigbus: |
| die_if_kernel("Unhandled kernel unaligned access", regs); |
| force_sig(SIGBUS, current); |
| |
| return; |
| |
| sigill: |
| die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs); |
| force_sig(SIGILL, current); |
| } |
| |
| asmlinkage void do_ade(struct pt_regs *regs) |
| { |
| unsigned int __user *pc; |
| mm_segment_t seg; |
| |
| perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, |
| 1, regs, regs->cp0_badvaddr); |
| /* |
| * Did we catch a fault trying to load an instruction? |
| * Or are we running in MIPS16 mode? |
| */ |
| if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1)) |
| goto sigbus; |
| |
| pc = (unsigned int __user *) exception_epc(regs); |
| if (user_mode(regs) && !test_thread_flag(TIF_FIXADE)) |
| goto sigbus; |
| if (unaligned_action == UNALIGNED_ACTION_SIGNAL) |
| goto sigbus; |
| else if (unaligned_action == UNALIGNED_ACTION_SHOW) |
| show_registers(regs); |
| |
| /* |
| * Do branch emulation only if we didn't forward the exception. |
| * This is all so but ugly ... |
| */ |
| seg = get_fs(); |
| if (!user_mode(regs)) |
| set_fs(KERNEL_DS); |
| emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc); |
| set_fs(seg); |
| |
| return; |
| |
| sigbus: |
| die_if_kernel("Kernel unaligned instruction access", regs); |
| force_sig(SIGBUS, current); |
| |
| /* |
| * XXX On return from the signal handler we should advance the epc |
| */ |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| extern struct dentry *mips_debugfs_dir; |
| static int __init debugfs_unaligned(void) |
| { |
| struct dentry *d; |
| |
| if (!mips_debugfs_dir) |
| return -ENODEV; |
| d = debugfs_create_u32("unaligned_instructions", S_IRUGO, |
| mips_debugfs_dir, &unaligned_instructions); |
| if (!d) |
| return -ENOMEM; |
| d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, |
| mips_debugfs_dir, &unaligned_action); |
| if (!d) |
| return -ENOMEM; |
| return 0; |
| } |
| __initcall(debugfs_unaligned); |
| #endif |