| /* |
| * Host Side support for RNDIS Networking Links |
| * Copyright (C) 2005 by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| // #define DEBUG // error path messages, extra info |
| // #define VERBOSE // more; success messages |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/usb/cdc.h> |
| |
| #include "usbnet.h" |
| |
| |
| /* |
| * RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of |
| * course ACM was intended for modems, not Ethernet links! USB's standard |
| * for Ethernet links is "CDC Ethernet", which is significantly simpler. |
| * |
| * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues |
| * include: |
| * - Power management in particular relies on information that's scattered |
| * through other documentation, and which is incomplete or incorrect even |
| * there. |
| * - There are various undocumented protocol requirements, such as the |
| * need to send unused garbage in control-OUT messages. |
| * - In some cases, MS-Windows will emit undocumented requests; this |
| * matters more to peripheral implementations than host ones. |
| * |
| * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync". |
| * |
| * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in |
| * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and |
| * currently rare) "Ethernet Emulation Model" (EEM). |
| */ |
| |
| /* |
| * CONTROL uses CDC "encapsulated commands" with funky notifications. |
| * - control-out: SEND_ENCAPSULATED |
| * - interrupt-in: RESPONSE_AVAILABLE |
| * - control-in: GET_ENCAPSULATED |
| * |
| * We'll try to ignore the RESPONSE_AVAILABLE notifications. |
| * |
| * REVISIT some RNDIS implementations seem to have curious issues still |
| * to be resolved. |
| */ |
| struct rndis_msg_hdr { |
| __le32 msg_type; /* RNDIS_MSG_* */ |
| __le32 msg_len; |
| // followed by data that varies between messages |
| __le32 request_id; |
| __le32 status; |
| // ... and more |
| } __attribute__ ((packed)); |
| |
| /* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */ |
| #define CONTROL_BUFFER_SIZE 1025 |
| |
| /* RNDIS defines an (absurdly huge) 10 second control timeout, |
| * but ActiveSync seems to use a more usual 5 second timeout |
| * (which matches the USB 2.0 spec). |
| */ |
| #define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000) |
| |
| |
| #define ccpu2 __constant_cpu_to_le32 |
| |
| #define RNDIS_MSG_COMPLETION ccpu2(0x80000000) |
| |
| /* codes for "msg_type" field of rndis messages; |
| * only the data channel uses packet messages (maybe batched); |
| * everything else goes on the control channel. |
| */ |
| #define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */ |
| #define RNDIS_MSG_INIT ccpu2(0x00000002) |
| #define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION) |
| #define RNDIS_MSG_HALT ccpu2(0x00000003) |
| #define RNDIS_MSG_QUERY ccpu2(0x00000004) |
| #define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION) |
| #define RNDIS_MSG_SET ccpu2(0x00000005) |
| #define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION) |
| #define RNDIS_MSG_RESET ccpu2(0x00000006) |
| #define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION) |
| #define RNDIS_MSG_INDICATE ccpu2(0x00000007) |
| #define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008) |
| #define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) |
| |
| /* codes for "status" field of completion messages */ |
| #define RNDIS_STATUS_SUCCESS ccpu2(0x00000000) |
| #define RNDIS_STATUS_FAILURE ccpu2(0xc0000001) |
| #define RNDIS_STATUS_INVALID_DATA ccpu2(0xc0010015) |
| #define RNDIS_STATUS_NOT_SUPPORTED ccpu2(0xc00000bb) |
| #define RNDIS_STATUS_MEDIA_CONNECT ccpu2(0x4001000b) |
| #define RNDIS_STATUS_MEDIA_DISCONNECT ccpu2(0x4001000c) |
| |
| |
| struct rndis_data_hdr { |
| __le32 msg_type; /* RNDIS_MSG_PACKET */ |
| __le32 msg_len; // rndis_data_hdr + data_len + pad |
| __le32 data_offset; // 36 -- right after header |
| __le32 data_len; // ... real packet size |
| |
| __le32 oob_data_offset; // zero |
| __le32 oob_data_len; // zero |
| __le32 num_oob; // zero |
| __le32 packet_data_offset; // zero |
| |
| __le32 packet_data_len; // zero |
| __le32 vc_handle; // zero |
| __le32 reserved; // zero |
| } __attribute__ ((packed)); |
| |
| struct rndis_init { /* OUT */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_INIT */ |
| __le32 msg_len; // 24 |
| __le32 request_id; |
| __le32 major_version; // of rndis (1.0) |
| __le32 minor_version; |
| __le32 max_transfer_size; |
| } __attribute__ ((packed)); |
| |
| struct rndis_init_c { /* IN */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_INIT_C */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 status; |
| __le32 major_version; // of rndis (1.0) |
| __le32 minor_version; |
| __le32 device_flags; |
| __le32 medium; // zero == 802.3 |
| __le32 max_packets_per_message; |
| __le32 max_transfer_size; |
| __le32 packet_alignment; // max 7; (1<<n) bytes |
| __le32 af_list_offset; // zero |
| __le32 af_list_size; // zero |
| } __attribute__ ((packed)); |
| |
| struct rndis_halt { /* OUT (no reply) */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_HALT */ |
| __le32 msg_len; |
| __le32 request_id; |
| } __attribute__ ((packed)); |
| |
| struct rndis_query { /* OUT */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_QUERY */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 oid; |
| __le32 len; |
| __le32 offset; |
| /*?*/ __le32 handle; // zero |
| } __attribute__ ((packed)); |
| |
| struct rndis_query_c { /* IN */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_QUERY_C */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 status; |
| __le32 len; |
| __le32 offset; |
| } __attribute__ ((packed)); |
| |
| struct rndis_set { /* OUT */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_SET */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 oid; |
| __le32 len; |
| __le32 offset; |
| /*?*/ __le32 handle; // zero |
| } __attribute__ ((packed)); |
| |
| struct rndis_set_c { /* IN */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_SET_C */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 status; |
| } __attribute__ ((packed)); |
| |
| struct rndis_reset { /* IN */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_RESET */ |
| __le32 msg_len; |
| __le32 reserved; |
| } __attribute__ ((packed)); |
| |
| struct rndis_reset_c { /* OUT */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_RESET_C */ |
| __le32 msg_len; |
| __le32 status; |
| __le32 addressing_lost; |
| } __attribute__ ((packed)); |
| |
| struct rndis_indicate { /* IN (unrequested) */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_INDICATE */ |
| __le32 msg_len; |
| __le32 status; |
| __le32 length; |
| __le32 offset; |
| /**/ __le32 diag_status; |
| __le32 error_offset; |
| /**/ __le32 message; |
| } __attribute__ ((packed)); |
| |
| struct rndis_keepalive { /* OUT (optionally IN) */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */ |
| __le32 msg_len; |
| __le32 request_id; |
| } __attribute__ ((packed)); |
| |
| struct rndis_keepalive_c { /* IN (optionally OUT) */ |
| // header and: |
| __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */ |
| __le32 msg_len; |
| __le32 request_id; |
| __le32 status; |
| } __attribute__ ((packed)); |
| |
| /* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and |
| * there are gobs more that may optionally be supported. We'll avoid as much |
| * of that mess as possible. |
| */ |
| #define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101) |
| #define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e) |
| |
| /* |
| * RNDIS notifications from device: command completion; "reverse" |
| * keepalives; etc |
| */ |
| static void rndis_status(struct usbnet *dev, struct urb *urb) |
| { |
| devdbg(dev, "rndis status urb, len %d stat %d", |
| urb->actual_length, urb->status); |
| // FIXME for keepalives, respond immediately (asynchronously) |
| // if not an RNDIS status, do like cdc_status(dev,urb) does |
| } |
| |
| /* |
| * RPC done RNDIS-style. Caller guarantees: |
| * - message is properly byteswapped |
| * - there's no other request pending |
| * - buf can hold up to 1KB response (required by RNDIS spec) |
| * On return, the first few entries are already byteswapped. |
| * |
| * Call context is likely probe(), before interface name is known, |
| * which is why we won't try to use it in the diagnostics. |
| */ |
| static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf) |
| { |
| struct cdc_state *info = (void *) &dev->data; |
| int master_ifnum; |
| int retval; |
| unsigned count; |
| __le32 rsp; |
| u32 xid = 0, msg_len, request_id; |
| |
| /* REVISIT when this gets called from contexts other than probe() or |
| * disconnect(): either serialize, or dispatch responses on xid |
| */ |
| |
| /* Issue the request; xid is unique, don't bother byteswapping it */ |
| if (likely(buf->msg_type != RNDIS_MSG_HALT |
| && buf->msg_type != RNDIS_MSG_RESET)) { |
| xid = dev->xid++; |
| if (!xid) |
| xid = dev->xid++; |
| buf->request_id = (__force __le32) xid; |
| } |
| master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber; |
| retval = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| buf, le32_to_cpu(buf->msg_len), |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (unlikely(retval < 0 || xid == 0)) |
| return retval; |
| |
| // FIXME Seems like some devices discard responses when |
| // we time out and cancel our "get response" requests... |
| // so, this is fragile. Probably need to poll for status. |
| |
| /* ignore status endpoint, just poll the control channel; |
| * the request probably completed immediately |
| */ |
| rsp = buf->msg_type | RNDIS_MSG_COMPLETION; |
| for (count = 0; count < 10; count++) { |
| memset(buf, 0, CONTROL_BUFFER_SIZE); |
| retval = usb_control_msg(dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| USB_CDC_GET_ENCAPSULATED_RESPONSE, |
| USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| buf, CONTROL_BUFFER_SIZE, |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (likely(retval >= 8)) { |
| msg_len = le32_to_cpu(buf->msg_len); |
| request_id = (__force u32) buf->request_id; |
| if (likely(buf->msg_type == rsp)) { |
| if (likely(request_id == xid)) { |
| if (unlikely(rsp == RNDIS_MSG_RESET_C)) |
| return 0; |
| if (likely(RNDIS_STATUS_SUCCESS |
| == buf->status)) |
| return 0; |
| dev_dbg(&info->control->dev, |
| "rndis reply status %08x\n", |
| le32_to_cpu(buf->status)); |
| return -EL3RST; |
| } |
| dev_dbg(&info->control->dev, |
| "rndis reply id %d expected %d\n", |
| request_id, xid); |
| /* then likely retry */ |
| } else switch (buf->msg_type) { |
| case RNDIS_MSG_INDICATE: { /* fault */ |
| // struct rndis_indicate *msg = (void *)buf; |
| dev_info(&info->control->dev, |
| "rndis fault indication\n"); |
| } |
| break; |
| case RNDIS_MSG_KEEPALIVE: { /* ping */ |
| struct rndis_keepalive_c *msg = (void *)buf; |
| |
| msg->msg_type = RNDIS_MSG_KEEPALIVE_C; |
| msg->msg_len = ccpu2(sizeof *msg); |
| msg->status = RNDIS_STATUS_SUCCESS; |
| retval = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| msg, sizeof *msg, |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (unlikely(retval < 0)) |
| dev_dbg(&info->control->dev, |
| "rndis keepalive err %d\n", |
| retval); |
| } |
| break; |
| default: |
| dev_dbg(&info->control->dev, |
| "unexpected rndis msg %08x len %d\n", |
| le32_to_cpu(buf->msg_type), msg_len); |
| } |
| } else { |
| /* device probably issued a protocol stall; ignore */ |
| dev_dbg(&info->control->dev, |
| "rndis response error, code %d\n", retval); |
| } |
| msleep(2); |
| } |
| dev_dbg(&info->control->dev, "rndis response timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int retval; |
| struct net_device *net = dev->net; |
| struct cdc_state *info = (void *) &dev->data; |
| union { |
| void *buf; |
| struct rndis_msg_hdr *header; |
| struct rndis_init *init; |
| struct rndis_init_c *init_c; |
| struct rndis_query *get; |
| struct rndis_query_c *get_c; |
| struct rndis_set *set; |
| struct rndis_set_c *set_c; |
| } u; |
| u32 tmp; |
| |
| /* we can't rely on i/o from stack working, or stack allocation */ |
| u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); |
| if (!u.buf) |
| return -ENOMEM; |
| retval = usbnet_generic_cdc_bind(dev, intf); |
| if (retval < 0) |
| goto fail; |
| |
| u.init->msg_type = RNDIS_MSG_INIT; |
| u.init->msg_len = ccpu2(sizeof *u.init); |
| u.init->major_version = ccpu2(1); |
| u.init->minor_version = ccpu2(0); |
| |
| /* max transfer (in spec) is 0x4000 at full speed, but for |
| * TX we'll stick to one Ethernet packet plus RNDIS framing. |
| * For RX we handle drivers that zero-pad to end-of-packet. |
| * Don't let userspace change these settings. |
| */ |
| net->hard_header_len += sizeof (struct rndis_data_hdr); |
| dev->hard_mtu = net->mtu + net->hard_header_len; |
| |
| dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1); |
| dev->rx_urb_size &= ~(dev->maxpacket - 1); |
| u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size); |
| |
| net->change_mtu = NULL; |
| retval = rndis_command(dev, u.header); |
| if (unlikely(retval < 0)) { |
| /* it might not even be an RNDIS device!! */ |
| dev_err(&intf->dev, "RNDIS init failed, %d\n", retval); |
| goto fail_and_release; |
| } |
| tmp = le32_to_cpu(u.init_c->max_transfer_size); |
| if (tmp < dev->hard_mtu) { |
| dev_err(&intf->dev, |
| "dev can't take %u byte packets (max %u)\n", |
| dev->hard_mtu, tmp); |
| goto fail_and_release; |
| } |
| |
| /* REVISIT: peripheral "alignment" request is ignored ... */ |
| dev_dbg(&intf->dev, |
| "hard mtu %u (%u from dev), rx buflen %Zu, align %d\n", |
| dev->hard_mtu, tmp, dev->rx_urb_size, |
| 1 << le32_to_cpu(u.init_c->packet_alignment)); |
| |
| /* Get designated host ethernet address. |
| * |
| * Adding a payload exactly the same size as the expected response |
| * payload is an evident requirement MSFT added for ActiveSync. |
| * This undocumented (and nonsensical) issue was found by sniffing |
| * protocol requests from the ActiveSync 4.1 Windows driver. |
| */ |
| memset(u.get, 0, sizeof *u.get + 48); |
| u.get->msg_type = RNDIS_MSG_QUERY; |
| u.get->msg_len = ccpu2(sizeof *u.get + 48); |
| u.get->oid = OID_802_3_PERMANENT_ADDRESS; |
| u.get->len = ccpu2(48); |
| u.get->offset = ccpu2(20); |
| |
| retval = rndis_command(dev, u.header); |
| if (unlikely(retval < 0)) { |
| dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval); |
| goto fail_and_release; |
| } |
| tmp = le32_to_cpu(u.get_c->offset); |
| if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN) |
| || u.get_c->len != ccpu2(ETH_ALEN))) { |
| dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n", |
| tmp, le32_to_cpu(u.get_c->len)); |
| retval = -EDOM; |
| goto fail_and_release; |
| } |
| memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN); |
| |
| /* set a nonzero filter to enable data transfers */ |
| memset(u.set, 0, sizeof *u.set); |
| u.set->msg_type = RNDIS_MSG_SET; |
| u.set->msg_len = ccpu2(4 + sizeof *u.set); |
| u.set->oid = OID_GEN_CURRENT_PACKET_FILTER; |
| u.set->len = ccpu2(4); |
| u.set->offset = ccpu2((sizeof *u.set) - 8); |
| *(__le32 *)(u.buf + sizeof *u.set) = ccpu2(DEFAULT_FILTER); |
| |
| retval = rndis_command(dev, u.header); |
| if (unlikely(retval < 0)) { |
| dev_err(&intf->dev, "rndis set packet filter, %d\n", retval); |
| goto fail_and_release; |
| } |
| |
| retval = 0; |
| |
| kfree(u.buf); |
| return retval; |
| |
| fail_and_release: |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver_of(intf), info->data); |
| fail: |
| kfree(u.buf); |
| return retval; |
| } |
| |
| static void rndis_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct rndis_halt *halt; |
| |
| /* try to clear any rndis state/activity (no i/o from stack!) */ |
| halt = kzalloc(sizeof *halt, GFP_KERNEL); |
| if (halt) { |
| halt->msg_type = RNDIS_MSG_HALT; |
| halt->msg_len = ccpu2(sizeof *halt); |
| (void) rndis_command(dev, (void *)halt); |
| kfree(halt); |
| } |
| |
| return usbnet_cdc_unbind(dev, intf); |
| } |
| |
| /* |
| * DATA -- host must not write zlps |
| */ |
| static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| /* peripheral may have batched packets to us... */ |
| while (likely(skb->len)) { |
| struct rndis_data_hdr *hdr = (void *)skb->data; |
| struct sk_buff *skb2; |
| u32 msg_len, data_offset, data_len; |
| |
| msg_len = le32_to_cpu(hdr->msg_len); |
| data_offset = le32_to_cpu(hdr->data_offset); |
| data_len = le32_to_cpu(hdr->data_len); |
| |
| /* don't choke if we see oob, per-packet data, etc */ |
| if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET |
| || skb->len < msg_len |
| || (data_offset + data_len + 8) > msg_len)) { |
| dev->stats.rx_frame_errors++; |
| devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d", |
| le32_to_cpu(hdr->msg_type), |
| msg_len, data_offset, data_len, skb->len); |
| return 0; |
| } |
| skb_pull(skb, 8 + data_offset); |
| |
| /* at most one packet left? */ |
| if (likely((data_len - skb->len) <= sizeof *hdr)) { |
| skb_trim(skb, data_len); |
| break; |
| } |
| |
| /* try to return all the packets in the batch */ |
| skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!skb2)) |
| break; |
| skb_pull(skb, msg_len - sizeof *hdr); |
| skb_trim(skb2, data_len); |
| usbnet_skb_return(dev, skb2); |
| } |
| |
| /* caller will usbnet_skb_return the remaining packet */ |
| return 1; |
| } |
| |
| static struct sk_buff * |
| rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) |
| { |
| struct rndis_data_hdr *hdr; |
| struct sk_buff *skb2; |
| unsigned len = skb->len; |
| |
| if (likely(!skb_cloned(skb))) { |
| int room = skb_headroom(skb); |
| |
| /* enough head room as-is? */ |
| if (unlikely((sizeof *hdr) <= room)) |
| goto fill; |
| |
| /* enough room, but needs to be readjusted? */ |
| room += skb_tailroom(skb); |
| if (likely((sizeof *hdr) <= room)) { |
| skb->data = memmove(skb->head + sizeof *hdr, |
| skb->data, len); |
| skb->tail = skb->data + len; |
| goto fill; |
| } |
| } |
| |
| /* create a new skb, with the correct size (and tailpad) */ |
| skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags); |
| dev_kfree_skb_any(skb); |
| if (unlikely(!skb2)) |
| return skb2; |
| skb = skb2; |
| |
| /* fill out the RNDIS header. we won't bother trying to batch |
| * packets; Linux minimizes wasted bandwidth through tx queues. |
| */ |
| fill: |
| hdr = (void *) __skb_push(skb, sizeof *hdr); |
| memset(hdr, 0, sizeof *hdr); |
| hdr->msg_type = RNDIS_MSG_PACKET; |
| hdr->msg_len = cpu_to_le32(skb->len); |
| hdr->data_offset = ccpu2(sizeof(*hdr) - 8); |
| hdr->data_len = cpu_to_le32(len); |
| |
| /* FIXME make the last packet always be short ... */ |
| return skb; |
| } |
| |
| |
| static const struct driver_info rndis_info = { |
| .description = "RNDIS device", |
| .flags = FLAG_ETHER | FLAG_FRAMING_RN, |
| .bind = rndis_bind, |
| .unbind = rndis_unbind, |
| .status = rndis_status, |
| .rx_fixup = rndis_rx_fixup, |
| .tx_fixup = rndis_tx_fixup, |
| }; |
| |
| #undef ccpu2 |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static const struct usb_device_id products [] = { |
| { |
| /* RNDIS is MSFT's un-official variant of CDC ACM */ |
| USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| .driver_info = (unsigned long) &rndis_info, |
| }, { |
| /* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */ |
| USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1), |
| .driver_info = (unsigned long) &rndis_info, |
| }, |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver rndis_driver = { |
| .name = "rndis_host", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| static int __init rndis_init(void) |
| { |
| return usb_register(&rndis_driver); |
| } |
| module_init(rndis_init); |
| |
| static void __exit rndis_exit(void) |
| { |
| usb_deregister(&rndis_driver); |
| } |
| module_exit(rndis_exit); |
| |
| MODULE_AUTHOR("David Brownell"); |
| MODULE_DESCRIPTION("USB Host side RNDIS driver"); |
| MODULE_LICENSE("GPL"); |