| /*************************************************************************** |
| * Copyright (C) 2006-2010 by Marin Mitov * |
| * mitov@issp.bas.bg * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation; either version 2 of the License, or * |
| * (at your option) any later version. * |
| * * |
| * This program is distributed in the hope that it will be useful, * |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| * GNU General Public License for more details. * |
| * * |
| ***************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/stringify.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include <linux/slab.h> |
| #include <media/v4l2-dev.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-common.h> |
| #include <media/videobuf2-dma-contig.h> |
| |
| #include "dt3155.h" |
| |
| #define DT3155_DEVICE_ID 0x1223 |
| |
| /** |
| * read_i2c_reg - reads an internal i2c register |
| * |
| * @addr: dt3155 mmio base address |
| * @index: index (internal address) of register to read |
| * @data: pointer to byte the read data will be placed in |
| * |
| * returns: zero on success or error code |
| * |
| * This function starts reading the specified (by index) register |
| * and busy waits for the process to finish. The result is placed |
| * in a byte pointed by data. |
| */ |
| static int read_i2c_reg(void __iomem *addr, u8 index, u8 *data) |
| { |
| u32 tmp = index; |
| |
| iowrite32((tmp << 17) | IIC_READ, addr + IIC_CSR2); |
| mmiowb(); |
| udelay(45); /* wait at least 43 usec for NEW_CYCLE to clear */ |
| if (ioread32(addr + IIC_CSR2) & NEW_CYCLE) |
| return -EIO; /* error: NEW_CYCLE not cleared */ |
| tmp = ioread32(addr + IIC_CSR1); |
| if (tmp & DIRECT_ABORT) { |
| /* reset DIRECT_ABORT bit */ |
| iowrite32(DIRECT_ABORT, addr + IIC_CSR1); |
| return -EIO; /* error: DIRECT_ABORT set */ |
| } |
| *data = tmp >> 24; |
| return 0; |
| } |
| |
| /** |
| * write_i2c_reg - writes to an internal i2c register |
| * |
| * @addr: dt3155 mmio base address |
| * @index: index (internal address) of register to read |
| * @data: data to be written |
| * |
| * returns: zero on success or error code |
| * |
| * This function starts writing the specified (by index) register |
| * and busy waits for the process to finish. |
| */ |
| static int write_i2c_reg(void __iomem *addr, u8 index, u8 data) |
| { |
| u32 tmp = index; |
| |
| iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2); |
| mmiowb(); |
| udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */ |
| if (ioread32(addr + IIC_CSR2) & NEW_CYCLE) |
| return -EIO; /* error: NEW_CYCLE not cleared */ |
| if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) { |
| /* reset DIRECT_ABORT bit */ |
| iowrite32(DIRECT_ABORT, addr + IIC_CSR1); |
| return -EIO; /* error: DIRECT_ABORT set */ |
| } |
| return 0; |
| } |
| |
| /** |
| * write_i2c_reg_nowait - writes to an internal i2c register |
| * |
| * @addr: dt3155 mmio base address |
| * @index: index (internal address) of register to read |
| * @data: data to be written |
| * |
| * This function starts writing the specified (by index) register |
| * and then returns. |
| */ |
| static void write_i2c_reg_nowait(void __iomem *addr, u8 index, u8 data) |
| { |
| u32 tmp = index; |
| |
| iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2); |
| mmiowb(); |
| } |
| |
| /** |
| * wait_i2c_reg - waits the read/write to finish |
| * |
| * @addr: dt3155 mmio base address |
| * |
| * returns: zero on success or error code |
| * |
| * This function waits reading/writing to finish. |
| */ |
| static int wait_i2c_reg(void __iomem *addr) |
| { |
| if (ioread32(addr + IIC_CSR2) & NEW_CYCLE) |
| udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */ |
| if (ioread32(addr + IIC_CSR2) & NEW_CYCLE) |
| return -EIO; /* error: NEW_CYCLE not cleared */ |
| if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) { |
| /* reset DIRECT_ABORT bit */ |
| iowrite32(DIRECT_ABORT, addr + IIC_CSR1); |
| return -EIO; /* error: DIRECT_ABORT set */ |
| } |
| return 0; |
| } |
| |
| static int |
| dt3155_queue_setup(struct vb2_queue *vq, |
| unsigned int *nbuffers, unsigned int *num_planes, |
| unsigned int sizes[], struct device *alloc_devs[]) |
| |
| { |
| struct dt3155_priv *pd = vb2_get_drv_priv(vq); |
| unsigned size = pd->width * pd->height; |
| |
| if (vq->num_buffers + *nbuffers < 2) |
| *nbuffers = 2 - vq->num_buffers; |
| if (*num_planes) |
| return sizes[0] < size ? -EINVAL : 0; |
| *num_planes = 1; |
| sizes[0] = size; |
| return 0; |
| } |
| |
| static int dt3155_buf_prepare(struct vb2_buffer *vb) |
| { |
| struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue); |
| |
| vb2_set_plane_payload(vb, 0, pd->width * pd->height); |
| return 0; |
| } |
| |
| static int dt3155_start_streaming(struct vb2_queue *q, unsigned count) |
| { |
| struct dt3155_priv *pd = vb2_get_drv_priv(q); |
| struct vb2_buffer *vb = &pd->curr_buf->vb2_buf; |
| dma_addr_t dma_addr; |
| |
| pd->sequence = 0; |
| dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0); |
| iowrite32(dma_addr, pd->regs + EVEN_DMA_START); |
| iowrite32(dma_addr + pd->width, pd->regs + ODD_DMA_START); |
| iowrite32(pd->width, pd->regs + EVEN_DMA_STRIDE); |
| iowrite32(pd->width, pd->regs + ODD_DMA_STRIDE); |
| /* enable interrupts, clear all irq flags */ |
| iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START | |
| FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR); |
| iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN | |
| FLD_DN_ODD | FLD_DN_EVEN | CAP_CONT_EVEN | CAP_CONT_ODD, |
| pd->regs + CSR1); |
| wait_i2c_reg(pd->regs); |
| write_i2c_reg(pd->regs, CONFIG, pd->config); |
| write_i2c_reg(pd->regs, EVEN_CSR, CSR_ERROR | CSR_DONE); |
| write_i2c_reg(pd->regs, ODD_CSR, CSR_ERROR | CSR_DONE); |
| |
| /* start the board */ |
| write_i2c_reg(pd->regs, CSR2, pd->csr2 | BUSY_EVEN | BUSY_ODD); |
| return 0; |
| } |
| |
| static void dt3155_stop_streaming(struct vb2_queue *q) |
| { |
| struct dt3155_priv *pd = vb2_get_drv_priv(q); |
| struct vb2_buffer *vb; |
| |
| spin_lock_irq(&pd->lock); |
| /* stop the board */ |
| write_i2c_reg_nowait(pd->regs, CSR2, pd->csr2); |
| iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN | |
| FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1); |
| /* disable interrupts, clear all irq flags */ |
| iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR); |
| spin_unlock_irq(&pd->lock); |
| |
| /* |
| * It is not clear whether the DMA stops at once or whether it |
| * will finish the current frame or field first. To be on the |
| * safe side we wait a bit. |
| */ |
| msleep(45); |
| |
| spin_lock_irq(&pd->lock); |
| if (pd->curr_buf) { |
| vb2_buffer_done(&pd->curr_buf->vb2_buf, VB2_BUF_STATE_ERROR); |
| pd->curr_buf = NULL; |
| } |
| |
| while (!list_empty(&pd->dmaq)) { |
| vb = list_first_entry(&pd->dmaq, typeof(*vb), done_entry); |
| list_del(&vb->done_entry); |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); |
| } |
| spin_unlock_irq(&pd->lock); |
| } |
| |
| static void dt3155_buf_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue); |
| |
| /* pd->vidq.streaming = 1 when dt3155_buf_queue() is invoked */ |
| spin_lock_irq(&pd->lock); |
| if (pd->curr_buf) |
| list_add_tail(&vb->done_entry, &pd->dmaq); |
| else |
| pd->curr_buf = vbuf; |
| spin_unlock_irq(&pd->lock); |
| } |
| |
| static const struct vb2_ops q_ops = { |
| .queue_setup = dt3155_queue_setup, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| .buf_prepare = dt3155_buf_prepare, |
| .start_streaming = dt3155_start_streaming, |
| .stop_streaming = dt3155_stop_streaming, |
| .buf_queue = dt3155_buf_queue, |
| }; |
| |
| static irqreturn_t dt3155_irq_handler_even(int irq, void *dev_id) |
| { |
| struct dt3155_priv *ipd = dev_id; |
| struct vb2_buffer *ivb; |
| dma_addr_t dma_addr; |
| u32 tmp; |
| |
| tmp = ioread32(ipd->regs + INT_CSR) & (FLD_START | FLD_END_ODD); |
| if (!tmp) |
| return IRQ_NONE; /* not our irq */ |
| if ((tmp & FLD_START) && !(tmp & FLD_END_ODD)) { |
| iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START, |
| ipd->regs + INT_CSR); |
| return IRQ_HANDLED; /* start of field irq */ |
| } |
| tmp = ioread32(ipd->regs + CSR1) & (FLD_CRPT_EVEN | FLD_CRPT_ODD); |
| if (tmp) { |
| iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN | |
| FLD_DN_ODD | FLD_DN_EVEN | |
| CAP_CONT_EVEN | CAP_CONT_ODD, |
| ipd->regs + CSR1); |
| mmiowb(); |
| } |
| |
| spin_lock(&ipd->lock); |
| if (ipd->curr_buf && !list_empty(&ipd->dmaq)) { |
| ipd->curr_buf->vb2_buf.timestamp = ktime_get_ns(); |
| ipd->curr_buf->sequence = ipd->sequence++; |
| ipd->curr_buf->field = V4L2_FIELD_NONE; |
| vb2_buffer_done(&ipd->curr_buf->vb2_buf, VB2_BUF_STATE_DONE); |
| |
| ivb = list_first_entry(&ipd->dmaq, typeof(*ivb), done_entry); |
| list_del(&ivb->done_entry); |
| ipd->curr_buf = to_vb2_v4l2_buffer(ivb); |
| dma_addr = vb2_dma_contig_plane_dma_addr(ivb, 0); |
| iowrite32(dma_addr, ipd->regs + EVEN_DMA_START); |
| iowrite32(dma_addr + ipd->width, ipd->regs + ODD_DMA_START); |
| iowrite32(ipd->width, ipd->regs + EVEN_DMA_STRIDE); |
| iowrite32(ipd->width, ipd->regs + ODD_DMA_STRIDE); |
| mmiowb(); |
| } |
| |
| /* enable interrupts, clear all irq flags */ |
| iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START | |
| FLD_END_EVEN | FLD_END_ODD, ipd->regs + INT_CSR); |
| spin_unlock(&ipd->lock); |
| return IRQ_HANDLED; |
| } |
| |
| static const struct v4l2_file_operations dt3155_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .unlocked_ioctl = video_ioctl2, |
| .read = vb2_fop_read, |
| .mmap = vb2_fop_mmap, |
| .poll = vb2_fop_poll |
| }; |
| |
| static int dt3155_querycap(struct file *filp, void *p, |
| struct v4l2_capability *cap) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| strcpy(cap->driver, DT3155_NAME); |
| strcpy(cap->card, DT3155_NAME " frame grabber"); |
| sprintf(cap->bus_info, "PCI:%s", pci_name(pd->pdev)); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | |
| V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int dt3155_enum_fmt_vid_cap(struct file *filp, |
| void *p, struct v4l2_fmtdesc *f) |
| { |
| if (f->index) |
| return -EINVAL; |
| f->pixelformat = V4L2_PIX_FMT_GREY; |
| strcpy(f->description, "8-bit Greyscale"); |
| return 0; |
| } |
| |
| static int dt3155_fmt_vid_cap(struct file *filp, void *p, struct v4l2_format *f) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| f->fmt.pix.width = pd->width; |
| f->fmt.pix.height = pd->height; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_GREY; |
| f->fmt.pix.field = V4L2_FIELD_NONE; |
| f->fmt.pix.bytesperline = f->fmt.pix.width; |
| f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| return 0; |
| } |
| |
| static int dt3155_g_std(struct file *filp, void *p, v4l2_std_id *norm) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| *norm = pd->std; |
| return 0; |
| } |
| |
| static int dt3155_s_std(struct file *filp, void *p, v4l2_std_id norm) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| if (pd->std == norm) |
| return 0; |
| if (vb2_is_busy(&pd->vidq)) |
| return -EBUSY; |
| pd->std = norm; |
| if (pd->std & V4L2_STD_525_60) { |
| pd->csr2 = VT_60HZ; |
| pd->width = 640; |
| pd->height = 480; |
| } else { |
| pd->csr2 = VT_50HZ; |
| pd->width = 768; |
| pd->height = 576; |
| } |
| return 0; |
| } |
| |
| static int dt3155_enum_input(struct file *filp, void *p, |
| struct v4l2_input *input) |
| { |
| if (input->index > 3) |
| return -EINVAL; |
| if (input->index) |
| snprintf(input->name, sizeof(input->name), "VID%d", |
| input->index); |
| else |
| strlcpy(input->name, "J2/VID0", sizeof(input->name)); |
| input->type = V4L2_INPUT_TYPE_CAMERA; |
| input->std = V4L2_STD_ALL; |
| input->status = 0; |
| return 0; |
| } |
| |
| static int dt3155_g_input(struct file *filp, void *p, unsigned int *i) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| *i = pd->input; |
| return 0; |
| } |
| |
| static int dt3155_s_input(struct file *filp, void *p, unsigned int i) |
| { |
| struct dt3155_priv *pd = video_drvdata(filp); |
| |
| if (i > 3) |
| return -EINVAL; |
| pd->input = i; |
| write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG); |
| write_i2c_reg(pd->regs, AD_CMD, (i << 6) | (i << 4) | SYNC_LVL_3); |
| return 0; |
| } |
| |
| static const struct v4l2_ioctl_ops dt3155_ioctl_ops = { |
| .vidioc_querycap = dt3155_querycap, |
| .vidioc_enum_fmt_vid_cap = dt3155_enum_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = dt3155_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = dt3155_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = dt3155_fmt_vid_cap, |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_expbuf = vb2_ioctl_expbuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| .vidioc_g_std = dt3155_g_std, |
| .vidioc_s_std = dt3155_s_std, |
| .vidioc_enum_input = dt3155_enum_input, |
| .vidioc_g_input = dt3155_g_input, |
| .vidioc_s_input = dt3155_s_input, |
| }; |
| |
| static int dt3155_init_board(struct dt3155_priv *pd) |
| { |
| struct pci_dev *pdev = pd->pdev; |
| int i; |
| u8 tmp = 0; |
| |
| pci_set_master(pdev); /* dt3155 needs it */ |
| |
| /* resetting the adapter */ |
| iowrite32(ADDR_ERR_ODD | ADDR_ERR_EVEN | FLD_CRPT_ODD | FLD_CRPT_EVEN | |
| FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1); |
| mmiowb(); |
| msleep(20); |
| |
| /* initializing adapter registers */ |
| iowrite32(FIFO_EN | SRST, pd->regs + CSR1); |
| mmiowb(); |
| iowrite32(0xEEEEEE01, pd->regs + EVEN_PIXEL_FMT); |
| iowrite32(0xEEEEEE01, pd->regs + ODD_PIXEL_FMT); |
| iowrite32(0x00000020, pd->regs + FIFO_TRIGER); |
| iowrite32(0x00000103, pd->regs + XFER_MODE); |
| iowrite32(0, pd->regs + RETRY_WAIT_CNT); |
| iowrite32(0, pd->regs + INT_CSR); |
| iowrite32(1, pd->regs + EVEN_FLD_MASK); |
| iowrite32(1, pd->regs + ODD_FLD_MASK); |
| iowrite32(0, pd->regs + MASK_LENGTH); |
| iowrite32(0x0005007C, pd->regs + FIFO_FLAG_CNT); |
| iowrite32(0x01010101, pd->regs + IIC_CLK_DUR); |
| mmiowb(); |
| |
| /* verifying that we have a DT3155 board (not just a SAA7116 chip) */ |
| read_i2c_reg(pd->regs, DT_ID, &tmp); |
| if (tmp != DT3155_ID) |
| return -ENODEV; |
| |
| /* initialize AD LUT */ |
| write_i2c_reg(pd->regs, AD_ADDR, 0); |
| for (i = 0; i < 256; i++) |
| write_i2c_reg(pd->regs, AD_LUT, i); |
| |
| /* initialize ADC references */ |
| /* FIXME: pos_ref & neg_ref depend on VT_50HZ */ |
| write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG); |
| write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3); |
| write_i2c_reg(pd->regs, AD_ADDR, AD_POS_REF); |
| write_i2c_reg(pd->regs, AD_CMD, 34); |
| write_i2c_reg(pd->regs, AD_ADDR, AD_NEG_REF); |
| write_i2c_reg(pd->regs, AD_CMD, 0); |
| |
| /* initialize PM LUT */ |
| write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM); |
| for (i = 0; i < 256; i++) { |
| write_i2c_reg(pd->regs, PM_LUT_ADDR, i); |
| write_i2c_reg(pd->regs, PM_LUT_DATA, i); |
| } |
| write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM | PM_LUT_SEL); |
| for (i = 0; i < 256; i++) { |
| write_i2c_reg(pd->regs, PM_LUT_ADDR, i); |
| write_i2c_reg(pd->regs, PM_LUT_DATA, i); |
| } |
| write_i2c_reg(pd->regs, CONFIG, pd->config); /* ACQ_MODE_EVEN */ |
| |
| /* select channel 1 for input and set sync level */ |
| write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG); |
| write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3); |
| |
| /* disable all irqs, clear all irq flags */ |
| iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD, |
| pd->regs + INT_CSR); |
| |
| return 0; |
| } |
| |
| static struct video_device dt3155_vdev = { |
| .name = DT3155_NAME, |
| .fops = &dt3155_fops, |
| .ioctl_ops = &dt3155_ioctl_ops, |
| .minor = -1, |
| .release = video_device_release_empty, |
| .tvnorms = V4L2_STD_ALL, |
| }; |
| |
| static int dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| int err; |
| struct dt3155_priv *pd; |
| |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return -ENODEV; |
| pd = devm_kzalloc(&pdev->dev, sizeof(*pd), GFP_KERNEL); |
| if (!pd) |
| return -ENOMEM; |
| |
| err = v4l2_device_register(&pdev->dev, &pd->v4l2_dev); |
| if (err) |
| return err; |
| pd->vdev = dt3155_vdev; |
| pd->vdev.v4l2_dev = &pd->v4l2_dev; |
| video_set_drvdata(&pd->vdev, pd); /* for use in video_fops */ |
| pd->pdev = pdev; |
| pd->std = V4L2_STD_625_50; |
| pd->csr2 = VT_50HZ; |
| pd->width = 768; |
| pd->height = 576; |
| INIT_LIST_HEAD(&pd->dmaq); |
| mutex_init(&pd->mux); |
| pd->vdev.lock = &pd->mux; /* for locking v4l2_file_operations */ |
| pd->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| pd->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| pd->vidq.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; |
| pd->vidq.ops = &q_ops; |
| pd->vidq.mem_ops = &vb2_dma_contig_memops; |
| pd->vidq.drv_priv = pd; |
| pd->vidq.min_buffers_needed = 2; |
| pd->vidq.gfp_flags = GFP_DMA32; |
| pd->vidq.lock = &pd->mux; /* for locking v4l2_file_operations */ |
| pd->vidq.dev = &pdev->dev; |
| pd->vdev.queue = &pd->vidq; |
| err = vb2_queue_init(&pd->vidq); |
| if (err < 0) |
| goto err_v4l2_dev_unreg; |
| spin_lock_init(&pd->lock); |
| pd->config = ACQ_MODE_EVEN; |
| err = pci_enable_device(pdev); |
| if (err) |
| goto err_v4l2_dev_unreg; |
| err = pci_request_region(pdev, 0, pci_name(pdev)); |
| if (err) |
| goto err_pci_disable; |
| pd->regs = pci_iomap(pdev, 0, pci_resource_len(pd->pdev, 0)); |
| if (!pd->regs) { |
| err = -ENOMEM; |
| goto err_free_reg; |
| } |
| err = dt3155_init_board(pd); |
| if (err) |
| goto err_iounmap; |
| err = request_irq(pd->pdev->irq, dt3155_irq_handler_even, |
| IRQF_SHARED, DT3155_NAME, pd); |
| if (err) |
| goto err_iounmap; |
| err = video_register_device(&pd->vdev, VFL_TYPE_GRABBER, -1); |
| if (err) |
| goto err_free_irq; |
| dev_info(&pdev->dev, "/dev/video%i is ready\n", pd->vdev.minor); |
| return 0; /* success */ |
| |
| err_free_irq: |
| free_irq(pd->pdev->irq, pd); |
| err_iounmap: |
| pci_iounmap(pdev, pd->regs); |
| err_free_reg: |
| pci_release_region(pdev, 0); |
| err_pci_disable: |
| pci_disable_device(pdev); |
| err_v4l2_dev_unreg: |
| v4l2_device_unregister(&pd->v4l2_dev); |
| return err; |
| } |
| |
| static void dt3155_remove(struct pci_dev *pdev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); |
| struct dt3155_priv *pd = container_of(v4l2_dev, struct dt3155_priv, |
| v4l2_dev); |
| |
| video_unregister_device(&pd->vdev); |
| free_irq(pd->pdev->irq, pd); |
| vb2_queue_release(&pd->vidq); |
| v4l2_device_unregister(&pd->v4l2_dev); |
| pci_iounmap(pdev, pd->regs); |
| pci_release_region(pdev, 0); |
| pci_disable_device(pdev); |
| } |
| |
| static const struct pci_device_id pci_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, DT3155_DEVICE_ID) }, |
| { 0, /* zero marks the end */ }, |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| static struct pci_driver pci_driver = { |
| .name = DT3155_NAME, |
| .id_table = pci_ids, |
| .probe = dt3155_probe, |
| .remove = dt3155_remove, |
| }; |
| |
| module_pci_driver(pci_driver); |
| |
| MODULE_DESCRIPTION("video4linux pci-driver for dt3155 frame grabber"); |
| MODULE_AUTHOR("Marin Mitov <mitov@issp.bas.bg>"); |
| MODULE_VERSION(DT3155_VERSION); |
| MODULE_LICENSE("GPL"); |