| /* |
| * NES, SNES, N64, MultiSystem, PSX gamepad driver for Linux |
| * |
| * Copyright (c) 1999-2004 Vojtech Pavlik <vojtech@suse.cz> |
| * Copyright (c) 2004 Peter Nelson <rufus-kernel@hackish.org> |
| * |
| * Based on the work of: |
| * Andree Borrmann John Dahlstrom |
| * David Kuder Nathan Hand |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Should you need to contact me, the author, you can do so either by |
| * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: |
| * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/parport.h> |
| #include <linux/input.h> |
| |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); |
| MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver"); |
| MODULE_LICENSE("GPL"); |
| |
| static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 }; |
| static int gc_nargs __initdata = 0; |
| module_param_array_named(map, gc, int, &gc_nargs, 0); |
| MODULE_PARM_DESC(map, "Describers first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)"); |
| |
| static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 }; |
| static int gc_nargs_2 __initdata = 0; |
| module_param_array_named(map2, gc_2, int, &gc_nargs_2, 0); |
| MODULE_PARM_DESC(map2, "Describers second set of devices"); |
| |
| static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 }; |
| static int gc_nargs_3 __initdata = 0; |
| module_param_array_named(map3, gc_3, int, &gc_nargs_3, 0); |
| MODULE_PARM_DESC(map3, "Describers third set of devices"); |
| |
| __obsolete_setup("gc="); |
| __obsolete_setup("gc_2="); |
| __obsolete_setup("gc_3="); |
| |
| /* see also gs_psx_delay parameter in PSX support section */ |
| |
| #define GC_SNES 1 |
| #define GC_NES 2 |
| #define GC_NES4 3 |
| #define GC_MULTI 4 |
| #define GC_MULTI2 5 |
| #define GC_N64 6 |
| #define GC_PSX 7 |
| #define GC_DDR 8 |
| |
| #define GC_MAX 8 |
| |
| #define GC_REFRESH_TIME HZ/100 |
| |
| struct gc { |
| struct pardevice *pd; |
| struct input_dev dev[5]; |
| struct timer_list timer; |
| unsigned char pads[GC_MAX + 1]; |
| int used; |
| struct semaphore sem; |
| char phys[5][32]; |
| }; |
| |
| static struct gc *gc_base[3]; |
| |
| static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 }; |
| |
| static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick", |
| "Multisystem 2-button joystick", "N64 controller", "PSX controller", |
| "PSX DDR controller" }; |
| /* |
| * N64 support. |
| */ |
| |
| static unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 }; |
| static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START }; |
| |
| #define GC_N64_LENGTH 32 /* N64 bit length, not including stop bit */ |
| #define GC_N64_REQUEST_LENGTH 37 /* transmit request sequence is 9 bits long */ |
| #define GC_N64_DELAY 133 /* delay between transmit request, and response ready (us) */ |
| #define GC_N64_REQUEST 0x1dd1111111ULL /* the request data command (encoded for 000000011) */ |
| #define GC_N64_DWS 3 /* delay between write segments (required for sound playback because of ISA DMA) */ |
| /* GC_N64_DWS > 24 is known to fail */ |
| #define GC_N64_POWER_W 0xe2 /* power during write (transmit request) */ |
| #define GC_N64_POWER_R 0xfd /* power during read */ |
| #define GC_N64_OUT 0x1d /* output bits to the 4 pads */ |
| /* Reading the main axes of any N64 pad is known to fail if the corresponding bit */ |
| /* in GC_N64_OUT is pulled low on the output port (by any routine) for more */ |
| /* than 123 us */ |
| #define GC_N64_CLOCK 0x02 /* clock bits for read */ |
| |
| /* |
| * gc_n64_read_packet() reads an N64 packet. |
| * Each pad uses one bit per byte. So all pads connected to this port are read in parallel. |
| */ |
| |
| static void gc_n64_read_packet(struct gc *gc, unsigned char *data) |
| { |
| int i; |
| unsigned long flags; |
| |
| /* |
| * Request the pad to transmit data |
| */ |
| |
| local_irq_save(flags); |
| for (i = 0; i < GC_N64_REQUEST_LENGTH; i++) { |
| parport_write_data(gc->pd->port, GC_N64_POWER_W | ((GC_N64_REQUEST >> i) & 1 ? GC_N64_OUT : 0)); |
| udelay(GC_N64_DWS); |
| } |
| local_irq_restore(flags); |
| |
| /* |
| * Wait for the pad response to be loaded into the 33-bit register of the adapter |
| */ |
| |
| udelay(GC_N64_DELAY); |
| |
| /* |
| * Grab data (ignoring the last bit, which is a stop bit) |
| */ |
| |
| for (i = 0; i < GC_N64_LENGTH; i++) { |
| parport_write_data(gc->pd->port, GC_N64_POWER_R); |
| data[i] = parport_read_status(gc->pd->port); |
| parport_write_data(gc->pd->port, GC_N64_POWER_R | GC_N64_CLOCK); |
| } |
| |
| /* |
| * We must wait 200 ms here for the controller to reinitialize before the next read request. |
| * No worries as long as gc_read is polled less frequently than this. |
| */ |
| |
| } |
| |
| /* |
| * NES/SNES support. |
| */ |
| |
| #define GC_NES_DELAY 6 /* Delay between bits - 6us */ |
| #define GC_NES_LENGTH 8 /* The NES pads use 8 bits of data */ |
| #define GC_SNES_LENGTH 12 /* The SNES true length is 16, but the last 4 bits are unused */ |
| |
| #define GC_NES_POWER 0xfc |
| #define GC_NES_CLOCK 0x01 |
| #define GC_NES_LATCH 0x02 |
| |
| static unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 }; |
| static unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 }; |
| static short gc_snes_btn[] = { BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR }; |
| |
| /* |
| * gc_nes_read_packet() reads a NES/SNES packet. |
| * Each pad uses one bit per byte. So all pads connected to |
| * this port are read in parallel. |
| */ |
| |
| static void gc_nes_read_packet(struct gc *gc, int length, unsigned char *data) |
| { |
| int i; |
| |
| parport_write_data(gc->pd->port, GC_NES_POWER | GC_NES_CLOCK | GC_NES_LATCH); |
| udelay(GC_NES_DELAY * 2); |
| parport_write_data(gc->pd->port, GC_NES_POWER | GC_NES_CLOCK); |
| |
| for (i = 0; i < length; i++) { |
| udelay(GC_NES_DELAY); |
| parport_write_data(gc->pd->port, GC_NES_POWER); |
| data[i] = parport_read_status(gc->pd->port) ^ 0x7f; |
| udelay(GC_NES_DELAY); |
| parport_write_data(gc->pd->port, GC_NES_POWER | GC_NES_CLOCK); |
| } |
| } |
| |
| /* |
| * Multisystem joystick support |
| */ |
| |
| #define GC_MULTI_LENGTH 5 /* Multi system joystick packet length is 5 */ |
| #define GC_MULTI2_LENGTH 6 /* One more bit for one more button */ |
| |
| /* |
| * gc_multi_read_packet() reads a Multisystem joystick packet. |
| */ |
| |
| static void gc_multi_read_packet(struct gc *gc, int length, unsigned char *data) |
| { |
| int i; |
| |
| for (i = 0; i < length; i++) { |
| parport_write_data(gc->pd->port, ~(1 << i)); |
| data[i] = parport_read_status(gc->pd->port) ^ 0x7f; |
| } |
| } |
| |
| /* |
| * PSX support |
| * |
| * See documentation at: |
| * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt |
| * http://www.gamesx.com/controldata/psxcont/psxcont.htm |
| * ftp://milano.usal.es/pablo/ |
| * |
| */ |
| |
| #define GC_PSX_DELAY 25 /* 25 usec */ |
| #define GC_PSX_LENGTH 8 /* talk to the controller in bits */ |
| #define GC_PSX_BYTES 6 /* the maximum number of bytes to read off the controller */ |
| |
| #define GC_PSX_MOUSE 1 /* Mouse */ |
| #define GC_PSX_NEGCON 2 /* NegCon */ |
| #define GC_PSX_NORMAL 4 /* Digital / Analog or Rumble in Digital mode */ |
| #define GC_PSX_ANALOG 5 /* Analog in Analog mode / Rumble in Green mode */ |
| #define GC_PSX_RUMBLE 7 /* Rumble in Red mode */ |
| |
| #define GC_PSX_CLOCK 0x04 /* Pin 4 */ |
| #define GC_PSX_COMMAND 0x01 /* Pin 2 */ |
| #define GC_PSX_POWER 0xf8 /* Pins 5-9 */ |
| #define GC_PSX_SELECT 0x02 /* Pin 3 */ |
| |
| #define GC_PSX_ID(x) ((x) >> 4) /* High nibble is device type */ |
| #define GC_PSX_LEN(x) (((x) & 0xf) << 1) /* Low nibble is length in bytes/2 */ |
| |
| static int gc_psx_delay = GC_PSX_DELAY; |
| module_param_named(psx_delay, gc_psx_delay, uint, 0); |
| MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)"); |
| |
| __obsolete_setup("gc_psx_delay="); |
| |
| static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y }; |
| static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y, |
| BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR }; |
| static short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 }; |
| |
| /* |
| * gc_psx_command() writes 8bit command and reads 8bit data from |
| * the psx pad. |
| */ |
| |
| static void gc_psx_command(struct gc *gc, int b, unsigned char data[5]) |
| { |
| int i, j, cmd, read; |
| for (i = 0; i < 5; i++) |
| data[i] = 0; |
| |
| for (i = 0; i < GC_PSX_LENGTH; i++, b >>= 1) { |
| cmd = (b & 1) ? GC_PSX_COMMAND : 0; |
| parport_write_data(gc->pd->port, cmd | GC_PSX_POWER); |
| udelay(gc_psx_delay); |
| read = parport_read_status(gc->pd->port) ^ 0x80; |
| for (j = 0; j < 5; j++) |
| data[j] |= (read & gc_status_bit[j] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) ? (1 << i) : 0; |
| parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER); |
| udelay(gc_psx_delay); |
| } |
| } |
| |
| /* |
| * gc_psx_read_packet() reads a whole psx packet and returns |
| * device identifier code. |
| */ |
| |
| static void gc_psx_read_packet(struct gc *gc, unsigned char data[5][GC_PSX_BYTES], unsigned char id[5]) |
| { |
| int i, j, max_len = 0; |
| unsigned long flags; |
| unsigned char data2[5]; |
| |
| parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); /* Select pad */ |
| udelay(gc_psx_delay); |
| parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER); /* Deselect, begin command */ |
| udelay(gc_psx_delay); |
| |
| local_irq_save(flags); |
| |
| gc_psx_command(gc, 0x01, data2); /* Access pad */ |
| gc_psx_command(gc, 0x42, id); /* Get device ids */ |
| gc_psx_command(gc, 0, data2); /* Dump status */ |
| |
| for (i =0; i < 5; i++) /* Find the longest pad */ |
| if((gc_status_bit[i] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) |
| && (GC_PSX_LEN(id[i]) > max_len) |
| && (GC_PSX_LEN(id[i]) <= GC_PSX_BYTES)) |
| max_len = GC_PSX_LEN(id[i]); |
| |
| for (i = 0; i < max_len; i++) { /* Read in all the data */ |
| gc_psx_command(gc, 0, data2); |
| for (j = 0; j < 5; j++) |
| data[j][i] = data2[j]; |
| } |
| |
| local_irq_restore(flags); |
| |
| parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); |
| |
| for(i = 0; i < 5; i++) /* Set id's to the real value */ |
| id[i] = GC_PSX_ID(id[i]); |
| } |
| |
| /* |
| * gc_timer() reads and analyzes console pads data. |
| */ |
| |
| #define GC_MAX_LENGTH GC_N64_LENGTH |
| |
| static void gc_timer(unsigned long private) |
| { |
| struct gc *gc = (void *) private; |
| struct input_dev *dev = gc->dev; |
| unsigned char data[GC_MAX_LENGTH]; |
| unsigned char data_psx[5][GC_PSX_BYTES]; |
| int i, j, s; |
| |
| /* |
| * N64 pads - must be read first, any read confuses them for 200 us |
| */ |
| |
| if (gc->pads[GC_N64]) { |
| |
| gc_n64_read_packet(gc, data); |
| |
| for (i = 0; i < 5; i++) { |
| |
| s = gc_status_bit[i]; |
| |
| if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) { |
| |
| signed char axes[2]; |
| axes[0] = axes[1] = 0; |
| |
| for (j = 0; j < 8; j++) { |
| if (data[23 - j] & s) axes[0] |= 1 << j; |
| if (data[31 - j] & s) axes[1] |= 1 << j; |
| } |
| |
| input_report_abs(dev + i, ABS_X, axes[0]); |
| input_report_abs(dev + i, ABS_Y, -axes[1]); |
| |
| input_report_abs(dev + i, ABS_HAT0X, !(s & data[6]) - !(s & data[7])); |
| input_report_abs(dev + i, ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); |
| |
| for (j = 0; j < 10; j++) |
| input_report_key(dev + i, gc_n64_btn[j], s & data[gc_n64_bytes[j]]); |
| |
| input_sync(dev + i); |
| } |
| } |
| } |
| |
| /* |
| * NES and SNES pads |
| */ |
| |
| if (gc->pads[GC_NES] || gc->pads[GC_SNES]) { |
| |
| gc_nes_read_packet(gc, gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH, data); |
| |
| for (i = 0; i < 5; i++) { |
| |
| s = gc_status_bit[i]; |
| |
| if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) { |
| input_report_abs(dev + i, ABS_X, !(s & data[6]) - !(s & data[7])); |
| input_report_abs(dev + i, ABS_Y, !(s & data[4]) - !(s & data[5])); |
| } |
| |
| if (s & gc->pads[GC_NES]) |
| for (j = 0; j < 4; j++) |
| input_report_key(dev + i, gc_snes_btn[j], s & data[gc_nes_bytes[j]]); |
| |
| if (s & gc->pads[GC_SNES]) |
| for (j = 0; j < 8; j++) |
| input_report_key(dev + i, gc_snes_btn[j], s & data[gc_snes_bytes[j]]); |
| |
| input_sync(dev + i); |
| } |
| } |
| |
| /* |
| * Multi and Multi2 joysticks |
| */ |
| |
| if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2]) { |
| |
| gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data); |
| |
| for (i = 0; i < 5; i++) { |
| |
| s = gc_status_bit[i]; |
| |
| if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) { |
| input_report_abs(dev + i, ABS_X, !(s & data[2]) - !(s & data[3])); |
| input_report_abs(dev + i, ABS_Y, !(s & data[0]) - !(s & data[1])); |
| input_report_key(dev + i, BTN_TRIGGER, s & data[4]); |
| } |
| |
| if (s & gc->pads[GC_MULTI2]) |
| input_report_key(dev + i, BTN_THUMB, s & data[5]); |
| |
| input_sync(dev + i); |
| } |
| } |
| |
| /* |
| * PSX controllers |
| */ |
| |
| if (gc->pads[GC_PSX] || gc->pads[GC_DDR]) { |
| |
| gc_psx_read_packet(gc, data_psx, data); |
| |
| for (i = 0; i < 5; i++) { |
| switch (data[i]) { |
| |
| case GC_PSX_RUMBLE: |
| |
| input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04); |
| input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02); |
| |
| case GC_PSX_NEGCON: |
| case GC_PSX_ANALOG: |
| |
| if(gc->pads[GC_DDR] & gc_status_bit[i]) { |
| for(j = 0; j < 4; j++) |
| input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); |
| } else { |
| for (j = 0; j < 4; j++) |
| input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]); |
| |
| input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); |
| input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); |
| } |
| |
| for (j = 0; j < 8; j++) |
| input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); |
| |
| input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); |
| input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); |
| |
| input_sync(dev + i); |
| |
| break; |
| |
| case GC_PSX_NORMAL: |
| if(gc->pads[GC_DDR] & gc_status_bit[i]) { |
| for(j = 0; j < 4; j++) |
| input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); |
| } else { |
| input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); |
| input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); |
| |
| /* for some reason if the extra axes are left unset they drift */ |
| /* for (j = 0; j < 4; j++) |
| input_report_abs(dev + i, gc_psx_abs[j+2], 128); |
| * This needs to be debugged properly, |
| * maybe fuzz processing needs to be done in input_sync() |
| * --vojtech |
| */ |
| } |
| |
| for (j = 0; j < 8; j++) |
| input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); |
| |
| input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); |
| input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); |
| |
| input_sync(dev + i); |
| |
| break; |
| |
| case 0: /* not a pad, ignore */ |
| break; |
| } |
| } |
| } |
| |
| mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME); |
| } |
| |
| static int gc_open(struct input_dev *dev) |
| { |
| struct gc *gc = dev->private; |
| int err; |
| |
| err = down_interruptible(&gc->sem); |
| if (err) |
| return err; |
| |
| if (!gc->used++) { |
| parport_claim(gc->pd); |
| parport_write_control(gc->pd->port, 0x04); |
| mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME); |
| } |
| |
| up(&gc->sem); |
| return 0; |
| } |
| |
| static void gc_close(struct input_dev *dev) |
| { |
| struct gc *gc = dev->private; |
| |
| down(&gc->sem); |
| if (!--gc->used) { |
| del_timer_sync(&gc->timer); |
| parport_write_control(gc->pd->port, 0x00); |
| parport_release(gc->pd); |
| } |
| up(&gc->sem); |
| } |
| |
| static struct gc __init *gc_probe(int *config, int nargs) |
| { |
| struct gc *gc; |
| struct parport *pp; |
| int i, j; |
| |
| if (config[0] < 0) |
| return NULL; |
| |
| if (nargs < 2) { |
| printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); |
| return NULL; |
| } |
| |
| pp = parport_find_number(config[0]); |
| |
| if (!pp) { |
| printk(KERN_ERR "gamecon.c: no such parport\n"); |
| return NULL; |
| } |
| |
| if (!(gc = kzalloc(sizeof(struct gc), GFP_KERNEL))) { |
| parport_put_port(pp); |
| return NULL; |
| } |
| |
| init_MUTEX(&gc->sem); |
| |
| gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); |
| |
| parport_put_port(pp); |
| |
| if (!gc->pd) { |
| printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n"); |
| kfree(gc); |
| return NULL; |
| } |
| |
| parport_claim(gc->pd); |
| |
| init_timer(&gc->timer); |
| gc->timer.data = (long) gc; |
| gc->timer.function = gc_timer; |
| |
| for (i = 0; i < nargs - 1; i++) { |
| |
| if (!config[i + 1]) |
| continue; |
| |
| if (config[i + 1] < 1 || config[i + 1] > GC_MAX) { |
| printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", config[i + 1]); |
| continue; |
| } |
| |
| gc->dev[i].private = gc; |
| gc->dev[i].open = gc_open; |
| gc->dev[i].close = gc_close; |
| |
| gc->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); |
| |
| for (j = 0; j < 2; j++) { |
| set_bit(ABS_X + j, gc->dev[i].absbit); |
| gc->dev[i].absmin[ABS_X + j] = -1; |
| gc->dev[i].absmax[ABS_X + j] = 1; |
| } |
| |
| gc->pads[0] |= gc_status_bit[i]; |
| gc->pads[config[i + 1]] |= gc_status_bit[i]; |
| |
| switch(config[i + 1]) { |
| |
| case GC_N64: |
| for (j = 0; j < 10; j++) |
| set_bit(gc_n64_btn[j], gc->dev[i].keybit); |
| |
| for (j = 0; j < 2; j++) { |
| set_bit(ABS_X + j, gc->dev[i].absbit); |
| gc->dev[i].absmin[ABS_X + j] = -127; |
| gc->dev[i].absmax[ABS_X + j] = 126; |
| gc->dev[i].absflat[ABS_X + j] = 2; |
| set_bit(ABS_HAT0X + j, gc->dev[i].absbit); |
| gc->dev[i].absmin[ABS_HAT0X + j] = -1; |
| gc->dev[i].absmax[ABS_HAT0X + j] = 1; |
| } |
| |
| break; |
| |
| case GC_SNES: |
| for (j = 4; j < 8; j++) |
| set_bit(gc_snes_btn[j], gc->dev[i].keybit); |
| case GC_NES: |
| for (j = 0; j < 4; j++) |
| set_bit(gc_snes_btn[j], gc->dev[i].keybit); |
| break; |
| |
| case GC_MULTI2: |
| set_bit(BTN_THUMB, gc->dev[i].keybit); |
| case GC_MULTI: |
| set_bit(BTN_TRIGGER, gc->dev[i].keybit); |
| break; |
| |
| case GC_PSX: |
| case GC_DDR: |
| if(config[i + 1] == GC_DDR) { |
| for (j = 0; j < 4; j++) |
| set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit); |
| } else { |
| for (j = 0; j < 6; j++) { |
| set_bit(gc_psx_abs[j], gc->dev[i].absbit); |
| gc->dev[i].absmin[gc_psx_abs[j]] = 4; |
| gc->dev[i].absmax[gc_psx_abs[j]] = 252; |
| gc->dev[i].absflat[gc_psx_abs[j]] = 2; |
| } |
| } |
| |
| for (j = 0; j < 12; j++) |
| set_bit(gc_psx_btn[j], gc->dev[i].keybit); |
| |
| break; |
| } |
| |
| sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i); |
| |
| gc->dev[i].name = gc_names[config[i + 1]]; |
| gc->dev[i].phys = gc->phys[i]; |
| gc->dev[i].id.bustype = BUS_PARPORT; |
| gc->dev[i].id.vendor = 0x0001; |
| gc->dev[i].id.product = config[i + 1]; |
| gc->dev[i].id.version = 0x0100; |
| } |
| |
| parport_release(gc->pd); |
| |
| if (!gc->pads[0]) { |
| parport_unregister_device(gc->pd); |
| kfree(gc); |
| return NULL; |
| } |
| |
| for (i = 0; i < 5; i++) |
| if (gc->pads[0] & gc_status_bit[i]) { |
| input_register_device(gc->dev + i); |
| printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name); |
| } |
| |
| return gc; |
| } |
| |
| static int __init gc_init(void) |
| { |
| gc_base[0] = gc_probe(gc, gc_nargs); |
| gc_base[1] = gc_probe(gc_2, gc_nargs_2); |
| gc_base[2] = gc_probe(gc_3, gc_nargs_3); |
| |
| if (gc_base[0] || gc_base[1] || gc_base[2]) |
| return 0; |
| |
| return -ENODEV; |
| } |
| |
| static void __exit gc_exit(void) |
| { |
| int i, j; |
| |
| for (i = 0; i < 3; i++) |
| if (gc_base[i]) { |
| for (j = 0; j < 5; j++) |
| if (gc_base[i]->pads[0] & gc_status_bit[j]) |
| input_unregister_device(gc_base[i]->dev + j); |
| parport_unregister_device(gc_base[i]->pd); |
| } |
| } |
| |
| module_init(gc_init); |
| module_exit(gc_exit); |