drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c - LeafOS-Devices/android_kernel_samsung_exynos9820 - Gitiles

 /*
  * Amlogic Meson8b and GXBB DWMAC glue layer
  *
  * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */

 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/device.h>
 #include <linux/ethtool.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>

 #include "stmmac_platform.h"

 #define PRG_ETH0			0x0

 #define PRG_ETH0_RGMII_MODE		BIT(0)

 /* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
 #define PRG_ETH0_CLK_M250_SEL_SHIFT	4
 #define PRG_ETH0_CLK_M250_SEL_MASK	GENMASK(4, 4)

 #define PRG_ETH0_TXDLY_SHIFT		5
 #define PRG_ETH0_TXDLY_MASK		GENMASK(6, 5)

 /* divider for the result of m250_sel */
 #define PRG_ETH0_CLK_M250_DIV_SHIFT	7
 #define PRG_ETH0_CLK_M250_DIV_WIDTH	3

 /* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
 #define PRG_ETH0_CLK_M25_DIV_SHIFT	10
 #define PRG_ETH0_CLK_M25_DIV_WIDTH	1

 #define PRG_ETH0_INVERTED_RMII_CLK	BIT(11)
 #define PRG_ETH0_TX_AND_PHY_REF_CLK	BIT(12)

 #define MUX_CLK_NUM_PARENTS		2

 struct meson8b_dwmac {
 	struct platform_device	*pdev;

 	void __iomem		*regs;

 	phy_interface_t		phy_mode;

 	struct clk_mux		m250_mux;
 	struct clk		*m250_mux_clk;
 	struct clk		*m250_mux_parent[MUX_CLK_NUM_PARENTS];

 	struct clk_divider	m250_div;
 	struct clk		*m250_div_clk;

 	struct clk_divider	m25_div;
 	struct clk		*m25_div_clk;

 	u32			tx_delay_ns;
 };

 static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
 				    u32 mask, u32 value)
 {
 	u32 data;

 	data = readl(dwmac->regs + reg);
 	data &= ~mask;
 	data |= (value & mask);

 	writel(data, dwmac->regs + reg);
 }

 static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
 {
 	struct clk_init_data init;
 	int i, ret;
 	struct device *dev = &dwmac->pdev->dev;
 	char clk_name[32];
 	const char *clk_div_parents[1];
 	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
 	static struct clk_div_table clk_25m_div_table[] = {
 		{ .val = 0, .div = 5 },
 		{ .val = 1, .div = 10 },
 		{ /* sentinel */ },
 	};

 	/* get the mux parents from DT */
 	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
 		char name[16];

 		snprintf(name, sizeof(name), "clkin%d", i);
 		dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
 		if (IS_ERR(dwmac->m250_mux_parent[i])) {
 			ret = PTR_ERR(dwmac->m250_mux_parent[i]);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Missing clock %s\n", name);
 			return ret;
 		}

 		mux_parent_names[i] =
 			__clk_get_name(dwmac->m250_mux_parent[i]);
 	}

 	/* create the m250_mux */
 	snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
 	init.name = clk_name;
 	init.ops = &clk_mux_ops;
 	init.flags = 0;
 	init.parent_names = mux_parent_names;
 	init.num_parents = MUX_CLK_NUM_PARENTS;

 	dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
 	dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
 	dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
 	dwmac->m250_mux.flags = 0;
 	dwmac->m250_mux.table = NULL;
 	dwmac->m250_mux.hw.init = &init;

 	dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
 	if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
 		return PTR_ERR(dwmac->m250_mux_clk);

 	/* create the m250_div */
 	snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
 	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
 	init.ops = &clk_divider_ops;
 	init.flags = CLK_SET_RATE_PARENT;
 	clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
 	init.parent_names = clk_div_parents;
 	init.num_parents = ARRAY_SIZE(clk_div_parents);

 	dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
 	dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
 	dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
 	dwmac->m250_div.hw.init = &init;
 	dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;

 	dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
 	if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
 		return PTR_ERR(dwmac->m250_div_clk);

 	/* create the m25_div */
 	snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
 	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
 	init.ops = &clk_divider_ops;
 	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
 	clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
 	init.parent_names = clk_div_parents;
 	init.num_parents = ARRAY_SIZE(clk_div_parents);

 	dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
 	dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
 	dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
 	dwmac->m25_div.table = clk_25m_div_table;
 	dwmac->m25_div.hw.init = &init;
 	dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;

 	dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
 	if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
 		return PTR_ERR(dwmac->m25_div_clk);

 	return 0;
 }

 static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
 {
 	int ret;
 	unsigned long clk_rate;
 	u8 tx_dly_val = 0;

 	switch (dwmac->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 		/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
 		 * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
 		 * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
 		 */
 		tx_dly_val = dwmac->tx_delay_ns >> 1;
 		/* fall through */

 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		/* Generate a 25MHz clock for the PHY */
 		clk_rate = 25 * 1000 * 1000;

 		/* enable RGMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
 					PRG_ETH0_RGMII_MODE);

 		/* only relevant for RMII mode -> disable in RGMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_INVERTED_RMII_CLK, 0);

 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
 					tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
 		break;

 	case PHY_INTERFACE_MODE_RMII:
 		/* Use the rate of the mux clock for the internal RMII PHY */
 		clk_rate = clk_get_rate(dwmac->m250_mux_clk);

 		/* disable RGMII mode -> enables RMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
 					0);

 		/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
 					PRG_ETH0_INVERTED_RMII_CLK,
 					PRG_ETH0_INVERTED_RMII_CLK);

 		/* TX clock delay cannot be configured in RMII mode */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
 					0);

 		break;

 	default:
 		dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
 			phy_modes(dwmac->phy_mode));
 		return -EINVAL;
 	}

 	ret = clk_prepare_enable(dwmac->m25_div_clk);
 	if (ret) {
 		dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
 		return ret;
 	}

 	ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
 	if (ret) {
 		clk_disable_unprepare(dwmac->m25_div_clk);

 		dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
 		return ret;
 	}

 	/* enable TX_CLK and PHY_REF_CLK generator */
 	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
 				PRG_ETH0_TX_AND_PHY_REF_CLK);

 	return 0;
 }

 static int meson8b_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct resource *res;
 	struct meson8b_dwmac *dwmac;
 	int ret;

 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
 		return ret;

 	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);

 	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
 	if (!dwmac) {
 		ret = -ENOMEM;
 		goto err_remove_config_dt;
 	}

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(dwmac->regs)) {
 		ret = PTR_ERR(dwmac->regs);
 		goto err_remove_config_dt;
 	}

 	dwmac->pdev = pdev;
 	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
 	if (dwmac->phy_mode < 0) {
 		dev_err(&pdev->dev, "missing phy-mode property\n");
 		ret = -EINVAL;
 		goto err_remove_config_dt;
 	}

 	/* use 2ns as fallback since this value was previously hardcoded */
 	if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
 				 &dwmac->tx_delay_ns))
 		dwmac->tx_delay_ns = 2;

 	ret = meson8b_init_clk(dwmac);
 	if (ret)
 		goto err_remove_config_dt;

 	ret = meson8b_init_prg_eth(dwmac);
 	if (ret)
 		goto err_remove_config_dt;

 	plat_dat->bsp_priv = dwmac;

 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
 		goto err_clk_disable;

 	return 0;

 err_clk_disable:
 	clk_disable_unprepare(dwmac->m25_div_clk);
 err_remove_config_dt:
 	stmmac_remove_config_dt(pdev, plat_dat);

 	return ret;
 }

 static int meson8b_dwmac_remove(struct platform_device *pdev)
 {
 	struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);

 	clk_disable_unprepare(dwmac->m25_div_clk);

 	return stmmac_pltfr_remove(pdev);
 }

 static const struct of_device_id meson8b_dwmac_match[] = {
 	{ .compatible = "amlogic,meson8b-dwmac" },
 	{ .compatible = "amlogic,meson-gxbb-dwmac" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);

 static struct platform_driver meson8b_dwmac_driver = {
 	.probe  = meson8b_dwmac_probe,
 	.remove = meson8b_dwmac_remove,
 	.driver = {
 		.name           = "meson8b-dwmac",
 		.pm		= &stmmac_pltfr_pm_ops,
 		.of_match_table = meson8b_dwmac_match,
 	},
 };
 module_platform_driver(meson8b_dwmac_driver);

 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
 MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
 MODULE_LICENSE("GPL v2");
	/*
	* Amlogic Meson8b and GXBB DWMAC glue layer
	*
	* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	*/

	#include <linux/clk.h>
	#include <linux/clk-provider.h>
	#include <linux/device.h>
	#include <linux/ethtool.h>
	#include <linux/io.h>
	#include <linux/ioport.h>
	#include <linux/module.h>
	#include <linux/of_net.h>
	#include <linux/mfd/syscon.h>
	#include <linux/platform_device.h>
	#include <linux/stmmac.h>

	#include "stmmac_platform.h"

	#define PRG_ETH0 0x0

	#define PRG_ETH0_RGMII_MODE BIT(0)

	/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
	#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
	#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)

	#define PRG_ETH0_TXDLY_SHIFT 5
	#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)

	/* divider for the result of m250_sel */
	#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
	#define PRG_ETH0_CLK_M250_DIV_WIDTH 3

	/* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
	#define PRG_ETH0_CLK_M25_DIV_SHIFT 10
	#define PRG_ETH0_CLK_M25_DIV_WIDTH 1

	#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
	#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)

	#define MUX_CLK_NUM_PARENTS 2

	struct meson8b_dwmac {
	struct platform_device *pdev;

	void __iomem *regs;

	phy_interface_t phy_mode;

	struct clk_mux m250_mux;
	struct clk *m250_mux_clk;
	struct clk *m250_mux_parent[MUX_CLK_NUM_PARENTS];

	struct clk_divider m250_div;
	struct clk *m250_div_clk;

	struct clk_divider m25_div;
	struct clk *m25_div_clk;

	u32 tx_delay_ns;
	};

	static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
	u32 mask, u32 value)
	{
	u32 data;

	data = readl(dwmac->regs + reg);
	data &= ~mask;
	data \|= (value & mask);

	writel(data, dwmac->regs + reg);
	}

	static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
	{
	struct clk_init_data init;
	int i, ret;
	struct device *dev = &dwmac->pdev->dev;
	char clk_name[32];
	const char *clk_div_parents[1];
	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
	static struct clk_div_table clk_25m_div_table[] = {
	{ .val = 0, .div = 5 },
	{ .val = 1, .div = 10 },
	{ /* sentinel */ },
	};

	/* get the mux parents from DT */
	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
	char name[16];

	snprintf(name, sizeof(name), "clkin%d", i);
	dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
	if (IS_ERR(dwmac->m250_mux_parent[i])) {
	ret = PTR_ERR(dwmac->m250_mux_parent[i]);
	if (ret != -EPROBE_DEFER)
	dev_err(dev, "Missing clock %s\n", name);
	return ret;
	}

	mux_parent_names[i] =
	__clk_get_name(dwmac->m250_mux_parent[i]);
	}

	/* create the m250_mux */
	snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
	init.name = clk_name;
	init.ops = &clk_mux_ops;
	init.flags = 0;
	init.parent_names = mux_parent_names;
	init.num_parents = MUX_CLK_NUM_PARENTS;

	dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
	dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
	dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
	dwmac->m250_mux.flags = 0;
	dwmac->m250_mux.table = NULL;
	dwmac->m250_mux.hw.init = &init;

	dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
	if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
	return PTR_ERR(dwmac->m250_mux_clk);

	/* create the m250_div */
	snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
	init.ops = &clk_divider_ops;
	init.flags = CLK_SET_RATE_PARENT;
	clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
	init.parent_names = clk_div_parents;
	init.num_parents = ARRAY_SIZE(clk_div_parents);

	dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
	dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
	dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
	dwmac->m250_div.hw.init = &init;
	dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED \| CLK_DIVIDER_ALLOW_ZERO;

	dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
	if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
	return PTR_ERR(dwmac->m250_div_clk);

	/* create the m25_div */
	snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
	init.ops = &clk_divider_ops;
	init.flags = CLK_IS_BASIC \| CLK_SET_RATE_PARENT;
	clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
	init.parent_names = clk_div_parents;
	init.num_parents = ARRAY_SIZE(clk_div_parents);

	dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
	dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
	dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
	dwmac->m25_div.table = clk_25m_div_table;
	dwmac->m25_div.hw.init = &init;
	dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;

	dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
	if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
	return PTR_ERR(dwmac->m25_div_clk);

	return 0;
	}

	static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
	{
	int ret;
	unsigned long clk_rate;
	u8 tx_dly_val = 0;

	switch (dwmac->phy_mode) {
	case PHY_INTERFACE_MODE_RGMII:
	case PHY_INTERFACE_MODE_RGMII_RXID:
	/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
	* 8ns are exactly one cycle of the 125MHz RGMII TX clock):
	* 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
	*/
	tx_dly_val = dwmac->tx_delay_ns >> 1;
	/* fall through */

	case PHY_INTERFACE_MODE_RGMII_ID:
	case PHY_INTERFACE_MODE_RGMII_TXID:
	/* Generate a 25MHz clock for the PHY */
	clk_rate = 25 * 1000 * 1000;

	/* enable RGMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
	PRG_ETH0_RGMII_MODE);

	/* only relevant for RMII mode -> disable in RGMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_INVERTED_RMII_CLK, 0);

	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
	tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
	break;

	case PHY_INTERFACE_MODE_RMII:
	/* Use the rate of the mux clock for the internal RMII PHY */
	clk_rate = clk_get_rate(dwmac->m250_mux_clk);

	/* disable RGMII mode -> enables RMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
	0);

	/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
	PRG_ETH0_INVERTED_RMII_CLK,
	PRG_ETH0_INVERTED_RMII_CLK);

	/* TX clock delay cannot be configured in RMII mode */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
	0);

	break;

	default:
	dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
	phy_modes(dwmac->phy_mode));
	return -EINVAL;
	}

	ret = clk_prepare_enable(dwmac->m25_div_clk);
	if (ret) {
	dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
	return ret;
	}

	ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
	if (ret) {
	clk_disable_unprepare(dwmac->m25_div_clk);

	dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
	return ret;
	}

	/* enable TX_CLK and PHY_REF_CLK generator */
	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
	PRG_ETH0_TX_AND_PHY_REF_CLK);

	return 0;
	}

	static int meson8b_dwmac_probe(struct platform_device *pdev)
	{
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct resource *res;
	struct meson8b_dwmac *dwmac;
	int ret;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
	return ret;

	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
	if (IS_ERR(plat_dat))
	return PTR_ERR(plat_dat);

	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
	if (!dwmac) {
	ret = -ENOMEM;
	goto err_remove_config_dt;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(dwmac->regs)) {
	ret = PTR_ERR(dwmac->regs);
	goto err_remove_config_dt;
	}

	dwmac->pdev = pdev;
	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
	if (dwmac->phy_mode < 0) {
	dev_err(&pdev->dev, "missing phy-mode property\n");
	ret = -EINVAL;
	goto err_remove_config_dt;
	}

	/* use 2ns as fallback since this value was previously hardcoded */
	if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
	&dwmac->tx_delay_ns))
	dwmac->tx_delay_ns = 2;

	ret = meson8b_init_clk(dwmac);
	if (ret)
	goto err_remove_config_dt;

	ret = meson8b_init_prg_eth(dwmac);
	if (ret)
	goto err_remove_config_dt;

	plat_dat->bsp_priv = dwmac;

	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
	if (ret)
	goto err_clk_disable;

	return 0;

	err_clk_disable:
	clk_disable_unprepare(dwmac->m25_div_clk);
	err_remove_config_dt:
	stmmac_remove_config_dt(pdev, plat_dat);

	return ret;
	}

	static int meson8b_dwmac_remove(struct platform_device *pdev)
	{
	struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);

	clk_disable_unprepare(dwmac->m25_div_clk);

	return stmmac_pltfr_remove(pdev);
	}

	static const struct of_device_id meson8b_dwmac_match[] = {
	{ .compatible = "amlogic,meson8b-dwmac" },
	{ .compatible = "amlogic,meson-gxbb-dwmac" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);

	static struct platform_driver meson8b_dwmac_driver = {
	.probe = meson8b_dwmac_probe,
	.remove = meson8b_dwmac_remove,
	.driver = {
	.name = "meson8b-dwmac",
	.pm = &stmmac_pltfr_pm_ops,
	.of_match_table = meson8b_dwmac_match,
	},
	};
	module_platform_driver(meson8b_dwmac_driver);

	MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
	MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
	MODULE_LICENSE("GPL v2");