| /* |
| * drivers/s390/char/tape_3590.c |
| * tape device discipline for 3590 tapes. |
| * |
| * Copyright IBM Corp. 2001, 2009 |
| * Author(s): Stefan Bader <shbader@de.ibm.com> |
| * Michael Holzheu <holzheu@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "tape_3590" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/bio.h> |
| #include <asm/ebcdic.h> |
| |
| #define TAPE_DBF_AREA tape_3590_dbf |
| #define BUFSIZE 512 /* size of buffers for dynamic generated messages */ |
| |
| #include "tape.h" |
| #include "tape_std.h" |
| #include "tape_3590.h" |
| |
| static struct workqueue_struct *tape_3590_wq; |
| |
| /* |
| * Pointer to debug area. |
| */ |
| debug_info_t *TAPE_DBF_AREA = NULL; |
| EXPORT_SYMBOL(TAPE_DBF_AREA); |
| |
| /******************************************************************* |
| * Error Recovery functions: |
| * - Read Opposite: implemented |
| * - Read Device (buffered) log: BRA |
| * - Read Library log: BRA |
| * - Swap Devices: BRA |
| * - Long Busy: implemented |
| * - Special Intercept: BRA |
| * - Read Alternate: implemented |
| *******************************************************************/ |
| |
| static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = { |
| [0x00] = "", |
| [0x10] = "Lost Sense", |
| [0x11] = "Assigned Elsewhere", |
| [0x12] = "Allegiance Reset", |
| [0x13] = "Shared Access Violation", |
| [0x20] = "Command Reject", |
| [0x21] = "Configuration Error", |
| [0x22] = "Protection Exception", |
| [0x23] = "Write Protect", |
| [0x24] = "Write Length", |
| [0x25] = "Read-Only Format", |
| [0x31] = "Beginning of Partition", |
| [0x33] = "End of Partition", |
| [0x34] = "End of Data", |
| [0x35] = "Block not found", |
| [0x40] = "Device Intervention", |
| [0x41] = "Loader Intervention", |
| [0x42] = "Library Intervention", |
| [0x50] = "Write Error", |
| [0x51] = "Erase Error", |
| [0x52] = "Formatting Error", |
| [0x53] = "Read Error", |
| [0x54] = "Unsupported Format", |
| [0x55] = "No Formatting", |
| [0x56] = "Positioning lost", |
| [0x57] = "Read Length", |
| [0x60] = "Unsupported Medium", |
| [0x61] = "Medium Length Error", |
| [0x62] = "Medium removed", |
| [0x64] = "Load Check", |
| [0x65] = "Unload Check", |
| [0x70] = "Equipment Check", |
| [0x71] = "Bus out Check", |
| [0x72] = "Protocol Error", |
| [0x73] = "Interface Error", |
| [0x74] = "Overrun", |
| [0x75] = "Halt Signal", |
| [0x90] = "Device fenced", |
| [0x91] = "Device Path fenced", |
| [0xa0] = "Volume misplaced", |
| [0xa1] = "Volume inaccessible", |
| [0xa2] = "Volume in input", |
| [0xa3] = "Volume ejected", |
| [0xa4] = "All categories reserved", |
| [0xa5] = "Duplicate Volume", |
| [0xa6] = "Library Manager Offline", |
| [0xa7] = "Library Output Station full", |
| [0xa8] = "Vision System non-operational", |
| [0xa9] = "Library Manager Equipment Check", |
| [0xaa] = "Library Equipment Check", |
| [0xab] = "All Library Cells full", |
| [0xac] = "No Cleaner Volumes in Library", |
| [0xad] = "I/O Station door open", |
| [0xae] = "Subsystem environmental alert", |
| }; |
| |
| static int crypt_supported(struct tape_device *device) |
| { |
| return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device)); |
| } |
| |
| static int crypt_enabled(struct tape_device *device) |
| { |
| return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device)); |
| } |
| |
| static void ext_to_int_kekl(struct tape390_kekl *in, |
| struct tape3592_kekl *out) |
| { |
| int i; |
| |
| memset(out, 0, sizeof(*out)); |
| if (in->type == TAPE390_KEKL_TYPE_HASH) |
| out->flags |= 0x40; |
| if (in->type_on_tape == TAPE390_KEKL_TYPE_HASH) |
| out->flags |= 0x80; |
| strncpy(out->label, in->label, 64); |
| for (i = strlen(in->label); i < sizeof(out->label); i++) |
| out->label[i] = ' '; |
| ASCEBC(out->label, sizeof(out->label)); |
| } |
| |
| static void int_to_ext_kekl(struct tape3592_kekl *in, |
| struct tape390_kekl *out) |
| { |
| memset(out, 0, sizeof(*out)); |
| if(in->flags & 0x40) |
| out->type = TAPE390_KEKL_TYPE_HASH; |
| else |
| out->type = TAPE390_KEKL_TYPE_LABEL; |
| if(in->flags & 0x80) |
| out->type_on_tape = TAPE390_KEKL_TYPE_HASH; |
| else |
| out->type_on_tape = TAPE390_KEKL_TYPE_LABEL; |
| memcpy(out->label, in->label, sizeof(in->label)); |
| EBCASC(out->label, sizeof(in->label)); |
| strim(out->label); |
| } |
| |
| static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in, |
| struct tape390_kekl_pair *out) |
| { |
| if (in->count == 0) { |
| out->kekl[0].type = TAPE390_KEKL_TYPE_NONE; |
| out->kekl[0].type_on_tape = TAPE390_KEKL_TYPE_NONE; |
| out->kekl[1].type = TAPE390_KEKL_TYPE_NONE; |
| out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE; |
| } else if (in->count == 1) { |
| int_to_ext_kekl(&in->kekl[0], &out->kekl[0]); |
| out->kekl[1].type = TAPE390_KEKL_TYPE_NONE; |
| out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE; |
| } else if (in->count == 2) { |
| int_to_ext_kekl(&in->kekl[0], &out->kekl[0]); |
| int_to_ext_kekl(&in->kekl[1], &out->kekl[1]); |
| } else { |
| printk("Invalid KEKL number: %d\n", in->count); |
| BUG(); |
| } |
| } |
| |
| static int check_ext_kekl(struct tape390_kekl *kekl) |
| { |
| if (kekl->type == TAPE390_KEKL_TYPE_NONE) |
| goto invalid; |
| if (kekl->type > TAPE390_KEKL_TYPE_HASH) |
| goto invalid; |
| if (kekl->type_on_tape == TAPE390_KEKL_TYPE_NONE) |
| goto invalid; |
| if (kekl->type_on_tape > TAPE390_KEKL_TYPE_HASH) |
| goto invalid; |
| if ((kekl->type == TAPE390_KEKL_TYPE_HASH) && |
| (kekl->type_on_tape == TAPE390_KEKL_TYPE_LABEL)) |
| goto invalid; |
| |
| return 0; |
| invalid: |
| return -EINVAL; |
| } |
| |
| static int check_ext_kekl_pair(struct tape390_kekl_pair *kekls) |
| { |
| if (check_ext_kekl(&kekls->kekl[0])) |
| goto invalid; |
| if (check_ext_kekl(&kekls->kekl[1])) |
| goto invalid; |
| |
| return 0; |
| invalid: |
| return -EINVAL; |
| } |
| |
| /* |
| * Query KEKLs |
| */ |
| static int tape_3592_kekl_query(struct tape_device *device, |
| struct tape390_kekl_pair *ext_kekls) |
| { |
| struct tape_request *request; |
| struct tape3592_kekl_query_order *order; |
| struct tape3592_kekl_query_data *int_kekls; |
| int rc; |
| |
| DBF_EVENT(6, "tape3592_kekl_query\n"); |
| int_kekls = kmalloc(sizeof(*int_kekls), GFP_KERNEL|GFP_DMA); |
| if (!int_kekls) |
| return -ENOMEM; |
| request = tape_alloc_request(2, sizeof(*order)); |
| if (IS_ERR(request)) { |
| rc = PTR_ERR(request); |
| goto fail_malloc; |
| } |
| order = request->cpdata; |
| memset(order,0,sizeof(*order)); |
| order->code = 0xe2; |
| order->max_count = 2; |
| request->op = TO_KEKL_QUERY; |
| tape_ccw_cc(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order); |
| tape_ccw_end(request->cpaddr + 1, READ_SS_DATA, sizeof(*int_kekls), |
| int_kekls); |
| rc = tape_do_io(device, request); |
| if (rc) |
| goto fail_request; |
| int_to_ext_kekl_pair(&int_kekls->kekls, ext_kekls); |
| |
| rc = 0; |
| fail_request: |
| tape_free_request(request); |
| fail_malloc: |
| kfree(int_kekls); |
| return rc; |
| } |
| |
| /* |
| * IOCTL: Query KEKLs |
| */ |
| static int tape_3592_ioctl_kekl_query(struct tape_device *device, |
| unsigned long arg) |
| { |
| int rc; |
| struct tape390_kekl_pair *ext_kekls; |
| |
| DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n"); |
| if (!crypt_supported(device)) |
| return -ENOSYS; |
| if (!crypt_enabled(device)) |
| return -EUNATCH; |
| ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL); |
| if (!ext_kekls) |
| return -ENOMEM; |
| rc = tape_3592_kekl_query(device, ext_kekls); |
| if (rc != 0) |
| goto fail; |
| if (copy_to_user((char __user *) arg, ext_kekls, sizeof(*ext_kekls))) { |
| rc = -EFAULT; |
| goto fail; |
| } |
| rc = 0; |
| fail: |
| kfree(ext_kekls); |
| return rc; |
| } |
| |
| static int tape_3590_mttell(struct tape_device *device, int mt_count); |
| |
| /* |
| * Set KEKLs |
| */ |
| static int tape_3592_kekl_set(struct tape_device *device, |
| struct tape390_kekl_pair *ext_kekls) |
| { |
| struct tape_request *request; |
| struct tape3592_kekl_set_order *order; |
| |
| DBF_EVENT(6, "tape3592_kekl_set\n"); |
| if (check_ext_kekl_pair(ext_kekls)) { |
| DBF_EVENT(6, "invalid kekls\n"); |
| return -EINVAL; |
| } |
| if (tape_3590_mttell(device, 0) != 0) |
| return -EBADSLT; |
| request = tape_alloc_request(1, sizeof(*order)); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| order = request->cpdata; |
| memset(order, 0, sizeof(*order)); |
| order->code = 0xe3; |
| order->kekls.count = 2; |
| ext_to_int_kekl(&ext_kekls->kekl[0], &order->kekls.kekl[0]); |
| ext_to_int_kekl(&ext_kekls->kekl[1], &order->kekls.kekl[1]); |
| request->op = TO_KEKL_SET; |
| tape_ccw_end(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order); |
| |
| return tape_do_io_free(device, request); |
| } |
| |
| /* |
| * IOCTL: Set KEKLs |
| */ |
| static int tape_3592_ioctl_kekl_set(struct tape_device *device, |
| unsigned long arg) |
| { |
| int rc; |
| struct tape390_kekl_pair *ext_kekls; |
| |
| DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n"); |
| if (!crypt_supported(device)) |
| return -ENOSYS; |
| if (!crypt_enabled(device)) |
| return -EUNATCH; |
| ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL); |
| if (!ext_kekls) |
| return -ENOMEM; |
| if (copy_from_user(ext_kekls, (char __user *)arg, sizeof(*ext_kekls))) { |
| rc = -EFAULT; |
| goto out; |
| } |
| rc = tape_3592_kekl_set(device, ext_kekls); |
| out: |
| kfree(ext_kekls); |
| return rc; |
| } |
| |
| /* |
| * Enable encryption |
| */ |
| static struct tape_request *__tape_3592_enable_crypt(struct tape_device *device) |
| { |
| struct tape_request *request; |
| char *data; |
| |
| DBF_EVENT(6, "tape_3592_enable_crypt\n"); |
| if (!crypt_supported(device)) |
| return ERR_PTR(-ENOSYS); |
| request = tape_alloc_request(2, 72); |
| if (IS_ERR(request)) |
| return request; |
| data = request->cpdata; |
| memset(data,0,72); |
| |
| data[0] = 0x05; |
| data[36 + 0] = 0x03; |
| data[36 + 1] = 0x03; |
| data[36 + 4] = 0x40; |
| data[36 + 6] = 0x01; |
| data[36 + 14] = 0x2f; |
| data[36 + 18] = 0xc3; |
| data[36 + 35] = 0x72; |
| request->op = TO_CRYPT_ON; |
| tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data); |
| tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36); |
| return request; |
| } |
| |
| static int tape_3592_enable_crypt(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = __tape_3592_enable_crypt(device); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| return tape_do_io_free(device, request); |
| } |
| |
| static void tape_3592_enable_crypt_async(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = __tape_3592_enable_crypt(device); |
| if (!IS_ERR(request)) |
| tape_do_io_async_free(device, request); |
| } |
| |
| /* |
| * Disable encryption |
| */ |
| static struct tape_request *__tape_3592_disable_crypt(struct tape_device *device) |
| { |
| struct tape_request *request; |
| char *data; |
| |
| DBF_EVENT(6, "tape_3592_disable_crypt\n"); |
| if (!crypt_supported(device)) |
| return ERR_PTR(-ENOSYS); |
| request = tape_alloc_request(2, 72); |
| if (IS_ERR(request)) |
| return request; |
| data = request->cpdata; |
| memset(data,0,72); |
| |
| data[0] = 0x05; |
| data[36 + 0] = 0x03; |
| data[36 + 1] = 0x03; |
| data[36 + 35] = 0x32; |
| |
| request->op = TO_CRYPT_OFF; |
| tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data); |
| tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36); |
| |
| return request; |
| } |
| |
| static int tape_3592_disable_crypt(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = __tape_3592_disable_crypt(device); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| return tape_do_io_free(device, request); |
| } |
| |
| static void tape_3592_disable_crypt_async(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = __tape_3592_disable_crypt(device); |
| if (!IS_ERR(request)) |
| tape_do_io_async_free(device, request); |
| } |
| |
| /* |
| * IOCTL: Set encryption status |
| */ |
| static int tape_3592_ioctl_crypt_set(struct tape_device *device, |
| unsigned long arg) |
| { |
| struct tape390_crypt_info info; |
| |
| DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n"); |
| if (!crypt_supported(device)) |
| return -ENOSYS; |
| if (copy_from_user(&info, (char __user *)arg, sizeof(info))) |
| return -EFAULT; |
| if (info.status & ~TAPE390_CRYPT_ON_MASK) |
| return -EINVAL; |
| if (info.status & TAPE390_CRYPT_ON_MASK) |
| return tape_3592_enable_crypt(device); |
| else |
| return tape_3592_disable_crypt(device); |
| } |
| |
| static int tape_3590_sense_medium(struct tape_device *device); |
| |
| /* |
| * IOCTL: Query enryption status |
| */ |
| static int tape_3592_ioctl_crypt_query(struct tape_device *device, |
| unsigned long arg) |
| { |
| DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n"); |
| if (!crypt_supported(device)) |
| return -ENOSYS; |
| tape_3590_sense_medium(device); |
| if (copy_to_user((char __user *) arg, &TAPE_3590_CRYPT_INFO(device), |
| sizeof(TAPE_3590_CRYPT_INFO(device)))) |
| return -EFAULT; |
| else |
| return 0; |
| } |
| |
| /* |
| * 3590 IOCTL Overload |
| */ |
| static int |
| tape_3590_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg) |
| { |
| switch (cmd) { |
| case TAPE390_DISPLAY: { |
| struct display_struct disp; |
| |
| if (copy_from_user(&disp, (char __user *) arg, sizeof(disp))) |
| return -EFAULT; |
| |
| return tape_std_display(device, &disp); |
| } |
| case TAPE390_KEKL_SET: |
| return tape_3592_ioctl_kekl_set(device, arg); |
| case TAPE390_KEKL_QUERY: |
| return tape_3592_ioctl_kekl_query(device, arg); |
| case TAPE390_CRYPT_SET: |
| return tape_3592_ioctl_crypt_set(device, arg); |
| case TAPE390_CRYPT_QUERY: |
| return tape_3592_ioctl_crypt_query(device, arg); |
| default: |
| return -EINVAL; /* no additional ioctls */ |
| } |
| } |
| |
| /* |
| * SENSE Medium: Get Sense data about medium state |
| */ |
| static int tape_3590_sense_medium(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = tape_alloc_request(1, 128); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| request->op = TO_MSEN; |
| tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata); |
| return tape_do_io_free(device, request); |
| } |
| |
| static void tape_3590_sense_medium_async(struct tape_device *device) |
| { |
| struct tape_request *request; |
| |
| request = tape_alloc_request(1, 128); |
| if (IS_ERR(request)) |
| return; |
| request->op = TO_MSEN; |
| tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata); |
| tape_do_io_async_free(device, request); |
| } |
| |
| /* |
| * MTTELL: Tell block. Return the number of block relative to current file. |
| */ |
| static int |
| tape_3590_mttell(struct tape_device *device, int mt_count) |
| { |
| __u64 block_id; |
| int rc; |
| |
| rc = tape_std_read_block_id(device, &block_id); |
| if (rc) |
| return rc; |
| return block_id >> 32; |
| } |
| |
| /* |
| * MTSEEK: seek to the specified block. |
| */ |
| static int |
| tape_3590_mtseek(struct tape_device *device, int count) |
| { |
| struct tape_request *request; |
| |
| DBF_EVENT(6, "xsee id: %x\n", count); |
| request = tape_alloc_request(3, 4); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| request->op = TO_LBL; |
| tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte); |
| *(__u32 *) request->cpdata = count; |
| tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata); |
| tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL); |
| return tape_do_io_free(device, request); |
| } |
| |
| /* |
| * Read Opposite Error Recovery Function: |
| * Used, when Read Forward does not work |
| */ |
| static void |
| tape_3590_read_opposite(struct tape_device *device, |
| struct tape_request *request) |
| { |
| struct tape_3590_disc_data *data; |
| |
| /* |
| * We have allocated 4 ccws in tape_std_read, so we can now |
| * transform the request to a read backward, followed by a |
| * forward space block. |
| */ |
| request->op = TO_RBA; |
| tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte); |
| data = device->discdata; |
| tape_ccw_cc_idal(request->cpaddr + 1, data->read_back_op, |
| device->char_data.idal_buf); |
| tape_ccw_cc(request->cpaddr + 2, FORSPACEBLOCK, 0, NULL); |
| tape_ccw_end(request->cpaddr + 3, NOP, 0, NULL); |
| DBF_EVENT(6, "xrop ccwg\n"); |
| } |
| |
| /* |
| * Read Attention Msg |
| * This should be done after an interrupt with attention bit (0x80) |
| * in device state. |
| * |
| * After a "read attention message" request there are two possible |
| * results: |
| * |
| * 1. A unit check is presented, when attention sense is present (e.g. when |
| * a medium has been unloaded). The attention sense comes then |
| * together with the unit check. The recovery action is either "retry" |
| * (in case there is an attention message pending) or "permanent error". |
| * |
| * 2. The attention msg is written to the "read subsystem data" buffer. |
| * In this case we probably should print it to the console. |
| */ |
| static void tape_3590_read_attmsg_async(struct tape_device *device) |
| { |
| struct tape_request *request; |
| char *buf; |
| |
| request = tape_alloc_request(3, 4096); |
| if (IS_ERR(request)) |
| return; |
| request->op = TO_READ_ATTMSG; |
| buf = request->cpdata; |
| buf[0] = PREP_RD_SS_DATA; |
| buf[6] = RD_ATTMSG; /* read att msg */ |
| tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf); |
| tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12); |
| tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL); |
| tape_do_io_async_free(device, request); |
| } |
| |
| /* |
| * These functions are used to schedule follow-up actions from within an |
| * interrupt context (like unsolicited interrupts). |
| * Note: the work handler is called by the system work queue. The tape |
| * commands started by the handler need to be asynchrounous, otherwise |
| * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq). |
| */ |
| struct work_handler_data { |
| struct tape_device *device; |
| enum tape_op op; |
| struct work_struct work; |
| }; |
| |
| static void |
| tape_3590_work_handler(struct work_struct *work) |
| { |
| struct work_handler_data *p = |
| container_of(work, struct work_handler_data, work); |
| |
| switch (p->op) { |
| case TO_MSEN: |
| tape_3590_sense_medium_async(p->device); |
| break; |
| case TO_READ_ATTMSG: |
| tape_3590_read_attmsg_async(p->device); |
| break; |
| case TO_CRYPT_ON: |
| tape_3592_enable_crypt_async(p->device); |
| break; |
| case TO_CRYPT_OFF: |
| tape_3592_disable_crypt_async(p->device); |
| break; |
| default: |
| DBF_EVENT(3, "T3590: work handler undefined for " |
| "operation 0x%02x\n", p->op); |
| } |
| tape_put_device(p->device); |
| kfree(p); |
| } |
| |
| static int |
| tape_3590_schedule_work(struct tape_device *device, enum tape_op op) |
| { |
| struct work_handler_data *p; |
| |
| if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL) |
| return -ENOMEM; |
| |
| INIT_WORK(&p->work, tape_3590_work_handler); |
| |
| p->device = tape_get_device(device); |
| p->op = op; |
| |
| queue_work(tape_3590_wq, &p->work); |
| return 0; |
| } |
| |
| #ifdef CONFIG_S390_TAPE_BLOCK |
| /* |
| * Tape Block READ |
| */ |
| static struct tape_request * |
| tape_3590_bread(struct tape_device *device, struct request *req) |
| { |
| struct tape_request *request; |
| struct ccw1 *ccw; |
| int count = 0, start_block; |
| unsigned off; |
| char *dst; |
| struct bio_vec *bv; |
| struct req_iterator iter; |
| |
| DBF_EVENT(6, "xBREDid:"); |
| start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B; |
| DBF_EVENT(6, "start_block = %i\n", start_block); |
| |
| rq_for_each_segment(bv, req, iter) |
| count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9); |
| |
| request = tape_alloc_request(2 + count + 1, 4); |
| if (IS_ERR(request)) |
| return request; |
| request->op = TO_BLOCK; |
| *(__u32 *) request->cpdata = start_block; |
| ccw = request->cpaddr; |
| ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte); |
| |
| /* |
| * We always setup a nop after the mode set ccw. This slot is |
| * used in tape_std_check_locate to insert a locate ccw if the |
| * current tape position doesn't match the start block to be read. |
| */ |
| ccw = tape_ccw_cc(ccw, NOP, 0, NULL); |
| |
| rq_for_each_segment(bv, req, iter) { |
| dst = page_address(bv->bv_page) + bv->bv_offset; |
| for (off = 0; off < bv->bv_len; off += TAPEBLOCK_HSEC_SIZE) { |
| ccw->flags = CCW_FLAG_CC; |
| ccw->cmd_code = READ_FORWARD; |
| ccw->count = TAPEBLOCK_HSEC_SIZE; |
| set_normalized_cda(ccw, (void *) __pa(dst)); |
| ccw++; |
| dst += TAPEBLOCK_HSEC_SIZE; |
| } |
| BUG_ON(off > bv->bv_len); |
| } |
| ccw = tape_ccw_end(ccw, NOP, 0, NULL); |
| DBF_EVENT(6, "xBREDccwg\n"); |
| return request; |
| } |
| |
| static void |
| tape_3590_free_bread(struct tape_request *request) |
| { |
| struct ccw1 *ccw; |
| |
| /* Last ccw is a nop and doesn't need clear_normalized_cda */ |
| for (ccw = request->cpaddr; ccw->flags & CCW_FLAG_CC; ccw++) |
| if (ccw->cmd_code == READ_FORWARD) |
| clear_normalized_cda(ccw); |
| tape_free_request(request); |
| } |
| |
| /* |
| * check_locate is called just before the tape request is passed to |
| * the common io layer for execution. It has to check the current |
| * tape position and insert a locate ccw if it doesn't match the |
| * start block for the request. |
| */ |
| static void |
| tape_3590_check_locate(struct tape_device *device, struct tape_request *request) |
| { |
| __u32 *start_block; |
| |
| start_block = (__u32 *) request->cpdata; |
| if (*start_block != device->blk_data.block_position) { |
| /* Add the start offset of the file to get the real block. */ |
| *start_block += device->bof; |
| tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata); |
| } |
| } |
| #endif |
| |
| static void tape_3590_med_state_set(struct tape_device *device, |
| struct tape_3590_med_sense *sense) |
| { |
| struct tape390_crypt_info *c_info; |
| |
| c_info = &TAPE_3590_CRYPT_INFO(device); |
| |
| DBF_EVENT(6, "medium state: %x:%x\n", sense->macst, sense->masst); |
| switch (sense->macst) { |
| case 0x04: |
| case 0x05: |
| case 0x06: |
| tape_med_state_set(device, MS_UNLOADED); |
| TAPE_3590_CRYPT_INFO(device).medium_status = 0; |
| return; |
| case 0x08: |
| case 0x09: |
| tape_med_state_set(device, MS_LOADED); |
| break; |
| default: |
| tape_med_state_set(device, MS_UNKNOWN); |
| return; |
| } |
| c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK; |
| if (sense->flags & MSENSE_CRYPT_MASK) { |
| DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags); |
| c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK; |
| } else { |
| DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags); |
| c_info->medium_status &= ~TAPE390_MEDIUM_ENCRYPTED_MASK; |
| } |
| } |
| |
| /* |
| * The done handler is called at device/channel end and wakes up the sleeping |
| * process |
| */ |
| static int |
| tape_3590_done(struct tape_device *device, struct tape_request *request) |
| { |
| |
| DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]); |
| |
| switch (request->op) { |
| case TO_BSB: |
| case TO_BSF: |
| case TO_DSE: |
| case TO_FSB: |
| case TO_FSF: |
| case TO_LBL: |
| case TO_RFO: |
| case TO_RBA: |
| case TO_REW: |
| case TO_WRI: |
| case TO_WTM: |
| case TO_BLOCK: |
| case TO_LOAD: |
| tape_med_state_set(device, MS_LOADED); |
| break; |
| case TO_RUN: |
| tape_med_state_set(device, MS_UNLOADED); |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); |
| break; |
| case TO_MSEN: |
| tape_3590_med_state_set(device, request->cpdata); |
| break; |
| case TO_CRYPT_ON: |
| TAPE_3590_CRYPT_INFO(device).status |
| |= TAPE390_CRYPT_ON_MASK; |
| *(device->modeset_byte) |= 0x03; |
| break; |
| case TO_CRYPT_OFF: |
| TAPE_3590_CRYPT_INFO(device).status |
| &= ~TAPE390_CRYPT_ON_MASK; |
| *(device->modeset_byte) &= ~0x03; |
| break; |
| case TO_RBI: /* RBI seems to succeed even without medium loaded. */ |
| case TO_NOP: /* Same to NOP. */ |
| case TO_READ_CONFIG: |
| case TO_READ_ATTMSG: |
| case TO_DIS: |
| case TO_ASSIGN: |
| case TO_UNASSIGN: |
| case TO_SIZE: |
| case TO_KEKL_SET: |
| case TO_KEKL_QUERY: |
| case TO_RDC: |
| break; |
| } |
| return TAPE_IO_SUCCESS; |
| } |
| |
| /* |
| * This function is called, when error recovery was successful |
| */ |
| static inline int |
| tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) |
| { |
| DBF_EVENT(3, "Error Recovery successful for %s\n", |
| tape_op_verbose[request->op]); |
| return tape_3590_done(device, request); |
| } |
| |
| /* |
| * This function is called, when error recovery was not successful |
| */ |
| static inline int |
| tape_3590_erp_failed(struct tape_device *device, struct tape_request *request, |
| struct irb *irb, int rc) |
| { |
| DBF_EVENT(3, "Error Recovery failed for %s\n", |
| tape_op_verbose[request->op]); |
| tape_dump_sense_dbf(device, request, irb); |
| return rc; |
| } |
| |
| /* |
| * Error Recovery do retry |
| */ |
| static inline int |
| tape_3590_erp_retry(struct tape_device *device, struct tape_request *request, |
| struct irb *irb) |
| { |
| DBF_EVENT(2, "Retry: %s\n", tape_op_verbose[request->op]); |
| tape_dump_sense_dbf(device, request, irb); |
| return TAPE_IO_RETRY; |
| } |
| |
| /* |
| * Handle unsolicited interrupts |
| */ |
| static int |
| tape_3590_unsolicited_irq(struct tape_device *device, struct irb *irb) |
| { |
| if (irb->scsw.cmd.dstat == DEV_STAT_CHN_END) |
| /* Probably result of halt ssch */ |
| return TAPE_IO_PENDING; |
| else if (irb->scsw.cmd.dstat == 0x85) |
| /* Device Ready */ |
| DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device->cdev_id); |
| else if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) { |
| tape_3590_schedule_work(device, TO_READ_ATTMSG); |
| } else { |
| DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); |
| tape_dump_sense_dbf(device, NULL, irb); |
| } |
| /* check medium state */ |
| tape_3590_schedule_work(device, TO_MSEN); |
| return TAPE_IO_SUCCESS; |
| } |
| |
| /* |
| * Basic Recovery routine |
| */ |
| static int |
| tape_3590_erp_basic(struct tape_device *device, struct tape_request *request, |
| struct irb *irb, int rc) |
| { |
| struct tape_3590_sense *sense; |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| |
| switch (sense->bra) { |
| case SENSE_BRA_PER: |
| return tape_3590_erp_failed(device, request, irb, rc); |
| case SENSE_BRA_CONT: |
| return tape_3590_erp_succeded(device, request); |
| case SENSE_BRA_RE: |
| return tape_3590_erp_retry(device, request, irb); |
| case SENSE_BRA_DRE: |
| return tape_3590_erp_failed(device, request, irb, rc); |
| default: |
| BUG(); |
| return TAPE_IO_STOP; |
| } |
| } |
| |
| /* |
| * RDL: Read Device (buffered) log |
| */ |
| static int |
| tape_3590_erp_read_buf_log(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| /* |
| * We just do the basic error recovery at the moment (retry). |
| * Perhaps in the future, we read the log and dump it somewhere... |
| */ |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| } |
| |
| /* |
| * SWAP: Swap Devices |
| */ |
| static int |
| tape_3590_erp_swap(struct tape_device *device, struct tape_request *request, |
| struct irb *irb) |
| { |
| /* |
| * This error recovery should swap the tapes |
| * if the original has a problem. The operation |
| * should proceed with the new tape... this |
| * should probably be done in user space! |
| */ |
| dev_warn (&device->cdev->dev, "The tape medium must be loaded into a " |
| "different tape unit\n"); |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| } |
| |
| /* |
| * LBY: Long Busy |
| */ |
| static int |
| tape_3590_erp_long_busy(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| DBF_EVENT(6, "Device is busy\n"); |
| return TAPE_IO_LONG_BUSY; |
| } |
| |
| /* |
| * SPI: Special Intercept |
| */ |
| static int |
| tape_3590_erp_special_interrupt(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| } |
| |
| /* |
| * RDA: Read Alternate |
| */ |
| static int |
| tape_3590_erp_read_alternate(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| struct tape_3590_disc_data *data; |
| |
| /* |
| * The issued Read Backward or Read Previous command is not |
| * supported by the device |
| * The recovery action should be to issue another command: |
| * Read Revious: if Read Backward is not supported |
| * Read Backward: if Read Previous is not supported |
| */ |
| data = device->discdata; |
| if (data->read_back_op == READ_PREVIOUS) { |
| DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n", |
| device->cdev_id); |
| data->read_back_op = READ_BACKWARD; |
| } else { |
| DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n", |
| device->cdev_id); |
| data->read_back_op = READ_PREVIOUS; |
| } |
| tape_3590_read_opposite(device, request); |
| return tape_3590_erp_retry(device, request, irb); |
| } |
| |
| /* |
| * Error Recovery read opposite |
| */ |
| static int |
| tape_3590_erp_read_opposite(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| switch (request->op) { |
| case TO_RFO: |
| /* |
| * We did read forward, but the data could not be read. |
| * We will read backward and then skip forward again. |
| */ |
| tape_3590_read_opposite(device, request); |
| return tape_3590_erp_retry(device, request, irb); |
| case TO_RBA: |
| /* We tried to read forward and backward, but hat no success */ |
| return tape_3590_erp_failed(device, request, irb, -EIO); |
| break; |
| default: |
| return tape_3590_erp_failed(device, request, irb, -EIO); |
| } |
| } |
| |
| /* |
| * Print an MIM (Media Information Message) (message code f0) |
| */ |
| static void |
| tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb) |
| { |
| struct tape_3590_sense *sense; |
| char *exception, *service; |
| |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); |
| |
| if (!exception || !service) |
| goto out_nomem; |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| /* Exception Message */ |
| switch (sense->fmt.f70.emc) { |
| case 0x02: |
| snprintf(exception, BUFSIZE, "Data degraded"); |
| break; |
| case 0x03: |
| snprintf(exception, BUFSIZE, "Data degraded in partion %i", |
| sense->fmt.f70.mp); |
| break; |
| case 0x04: |
| snprintf(exception, BUFSIZE, "Medium degraded"); |
| break; |
| case 0x05: |
| snprintf(exception, BUFSIZE, "Medium degraded in partition %i", |
| sense->fmt.f70.mp); |
| break; |
| case 0x06: |
| snprintf(exception, BUFSIZE, "Block 0 Error"); |
| break; |
| case 0x07: |
| snprintf(exception, BUFSIZE, "Medium Exception 0x%02x", |
| sense->fmt.f70.md); |
| break; |
| default: |
| snprintf(exception, BUFSIZE, "0x%02x", |
| sense->fmt.f70.emc); |
| break; |
| } |
| /* Service Message */ |
| switch (sense->fmt.f70.smc) { |
| case 0x02: |
| snprintf(service, BUFSIZE, "Reference Media maintenance " |
| "procedure %i", sense->fmt.f70.md); |
| break; |
| default: |
| snprintf(service, BUFSIZE, "0x%02x", |
| sense->fmt.f70.smc); |
| break; |
| } |
| |
| dev_warn (&device->cdev->dev, "Tape media information: exception %s, " |
| "service %s\n", exception, service); |
| |
| out_nomem: |
| kfree(exception); |
| kfree(service); |
| } |
| |
| /* |
| * Print an I/O Subsystem Service Information Message (message code f1) |
| */ |
| static void |
| tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb) |
| { |
| struct tape_3590_sense *sense; |
| char *exception, *service; |
| |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); |
| |
| if (!exception || !service) |
| goto out_nomem; |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| /* Exception Message */ |
| switch (sense->fmt.f71.emc) { |
| case 0x01: |
| snprintf(exception, BUFSIZE, "Effect of failure is unknown"); |
| break; |
| case 0x02: |
| snprintf(exception, BUFSIZE, "CU Exception - no performance " |
| "impact"); |
| break; |
| case 0x03: |
| snprintf(exception, BUFSIZE, "CU Exception on channel " |
| "interface 0x%02x", sense->fmt.f71.md[0]); |
| break; |
| case 0x04: |
| snprintf(exception, BUFSIZE, "CU Exception on device path " |
| "0x%02x", sense->fmt.f71.md[0]); |
| break; |
| case 0x05: |
| snprintf(exception, BUFSIZE, "CU Exception on library path " |
| "0x%02x", sense->fmt.f71.md[0]); |
| break; |
| case 0x06: |
| snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x", |
| sense->fmt.f71.md[0]); |
| break; |
| case 0x07: |
| snprintf(exception, BUFSIZE, "CU Exception on partition " |
| "0x%02x", sense->fmt.f71.md[0]); |
| break; |
| default: |
| snprintf(exception, BUFSIZE, "0x%02x", |
| sense->fmt.f71.emc); |
| } |
| /* Service Message */ |
| switch (sense->fmt.f71.smc) { |
| case 0x01: |
| snprintf(service, BUFSIZE, "Repair impact is unknown"); |
| break; |
| case 0x02: |
| snprintf(service, BUFSIZE, "Repair will not impact cu " |
| "performance"); |
| break; |
| case 0x03: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable node " |
| "0x%x on CU", sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1], |
| sense->fmt.f71.md[2]); |
| break; |
| case 0x04: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "channel path 0x%x on CU", |
| sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable cannel" |
| " paths (0x%x-0x%x) on CU", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x05: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable device" |
| " path 0x%x on CU", sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable device" |
| " paths (0x%x-0x%x) on CU", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x06: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "library path 0x%x on CU", |
| sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "library paths (0x%x-0x%x) on CU", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x07: |
| snprintf(service, BUFSIZE, "Repair will disable access to CU"); |
| break; |
| default: |
| snprintf(service, BUFSIZE, "0x%02x", |
| sense->fmt.f71.smc); |
| } |
| |
| dev_warn (&device->cdev->dev, "I/O subsystem information: exception" |
| " %s, service %s\n", exception, service); |
| out_nomem: |
| kfree(exception); |
| kfree(service); |
| } |
| |
| /* |
| * Print an Device Subsystem Service Information Message (message code f2) |
| */ |
| static void |
| tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb) |
| { |
| struct tape_3590_sense *sense; |
| char *exception, *service; |
| |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); |
| |
| if (!exception || !service) |
| goto out_nomem; |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| /* Exception Message */ |
| switch (sense->fmt.f71.emc) { |
| case 0x01: |
| snprintf(exception, BUFSIZE, "Effect of failure is unknown"); |
| break; |
| case 0x02: |
| snprintf(exception, BUFSIZE, "DV Exception - no performance" |
| " impact"); |
| break; |
| case 0x03: |
| snprintf(exception, BUFSIZE, "DV Exception on channel " |
| "interface 0x%02x", sense->fmt.f71.md[0]); |
| break; |
| case 0x04: |
| snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x", |
| sense->fmt.f71.md[0]); |
| break; |
| case 0x05: |
| snprintf(exception, BUFSIZE, "DV Exception on message display" |
| " 0x%02x", sense->fmt.f71.md[0]); |
| break; |
| case 0x06: |
| snprintf(exception, BUFSIZE, "DV Exception in tape path"); |
| break; |
| case 0x07: |
| snprintf(exception, BUFSIZE, "DV Exception in drive"); |
| break; |
| default: |
| snprintf(exception, BUFSIZE, "0x%02x", |
| sense->fmt.f71.emc); |
| } |
| /* Service Message */ |
| switch (sense->fmt.f71.smc) { |
| case 0x01: |
| snprintf(service, BUFSIZE, "Repair impact is unknown"); |
| break; |
| case 0x02: |
| snprintf(service, BUFSIZE, "Repair will not impact device " |
| "performance"); |
| break; |
| case 0x03: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "channel path 0x%x on DV", |
| sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "channel path (0x%x-0x%x) on DV", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x04: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "interface 0x%x on DV", sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "interfaces (0x%x-0x%x) on DV", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x05: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable loader" |
| " 0x%x on DV", sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable loader" |
| " (0x%x-0x%x) on DV", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x07: |
| snprintf(service, BUFSIZE, "Repair will disable access to DV"); |
| break; |
| case 0x08: |
| if (sense->fmt.f71.mdf == 0) |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "message display 0x%x on DV", |
| sense->fmt.f71.md[1]); |
| else |
| snprintf(service, BUFSIZE, "Repair will disable " |
| "message displays (0x%x-0x%x) on DV", |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); |
| break; |
| case 0x09: |
| snprintf(service, BUFSIZE, "Clean DV"); |
| break; |
| default: |
| snprintf(service, BUFSIZE, "0x%02x", |
| sense->fmt.f71.smc); |
| } |
| |
| dev_warn (&device->cdev->dev, "Device subsystem information: exception" |
| " %s, service %s\n", exception, service); |
| out_nomem: |
| kfree(exception); |
| kfree(service); |
| } |
| |
| /* |
| * Print standard ERA Message |
| */ |
| static void |
| tape_3590_print_era_msg(struct tape_device *device, struct irb *irb) |
| { |
| struct tape_3590_sense *sense; |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| if (sense->mc == 0) |
| return; |
| if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) { |
| if (tape_3590_msg[sense->mc] != NULL) |
| dev_warn (&device->cdev->dev, "The tape unit has " |
| "issued sense message %s\n", |
| tape_3590_msg[sense->mc]); |
| else |
| dev_warn (&device->cdev->dev, "The tape unit has " |
| "issued an unknown sense message code 0x%x\n", |
| sense->mc); |
| return; |
| } |
| if (sense->mc == 0xf0) { |
| /* Standard Media Information Message */ |
| dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, " |
| "RC=%02x-%04x-%02x\n", sense->fmt.f70.sev, sense->mc, |
| sense->fmt.f70.emc, sense->fmt.f70.smc, |
| sense->fmt.f70.refcode, sense->fmt.f70.mid, |
| sense->fmt.f70.fid); |
| tape_3590_print_mim_msg_f0(device, irb); |
| return; |
| } |
| if (sense->mc == 0xf1) { |
| /* Standard I/O Subsystem Service Information Message */ |
| dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x," |
| " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", |
| sense->fmt.f71.sev, device->cdev->id.dev_model, |
| sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, |
| sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, |
| sense->fmt.f71.refcode3); |
| tape_3590_print_io_sim_msg_f1(device, irb); |
| return; |
| } |
| if (sense->mc == 0xf2) { |
| /* Standard Device Service Information Message */ |
| dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x" |
| ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", |
| sense->fmt.f71.sev, device->cdev->id.dev_model, |
| sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, |
| sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, |
| sense->fmt.f71.refcode3); |
| tape_3590_print_dev_sim_msg_f2(device, irb); |
| return; |
| } |
| if (sense->mc == 0xf3) { |
| /* Standard Library Service Information Message */ |
| return; |
| } |
| dev_warn (&device->cdev->dev, "The tape unit has issued an unknown " |
| "sense message code %x\n", sense->mc); |
| } |
| |
| static int tape_3590_crypt_error(struct tape_device *device, |
| struct tape_request *request, struct irb *irb) |
| { |
| u8 cu_rc, ekm_rc1; |
| u16 ekm_rc2; |
| u32 drv_rc; |
| char *sense; |
| |
| sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data; |
| cu_rc = sense[0]; |
| drv_rc = *((u32*) &sense[5]) & 0xffffff; |
| ekm_rc1 = sense[9]; |
| ekm_rc2 = *((u16*) &sense[10]); |
| if ((cu_rc == 0) && (ekm_rc2 == 0xee31)) |
| /* key not defined on EKM */ |
| return tape_3590_erp_basic(device, request, irb, -EKEYREJECTED); |
| if ((cu_rc == 1) || (cu_rc == 2)) |
| /* No connection to EKM */ |
| return tape_3590_erp_basic(device, request, irb, -ENOTCONN); |
| |
| dev_err (&device->cdev->dev, "The tape unit failed to obtain the " |
| "encryption key from EKM\n"); |
| |
| return tape_3590_erp_basic(device, request, irb, -ENOKEY); |
| } |
| |
| /* |
| * 3590 error Recovery routine: |
| * If possible, it tries to recover from the error. If this is not possible, |
| * inform the user about the problem. |
| */ |
| static int |
| tape_3590_unit_check(struct tape_device *device, struct tape_request *request, |
| struct irb *irb) |
| { |
| struct tape_3590_sense *sense; |
| |
| #ifdef CONFIG_S390_TAPE_BLOCK |
| if (request->op == TO_BLOCK) { |
| /* |
| * Recovery for block device requests. Set the block_position |
| * to something invalid and retry. |
| */ |
| device->blk_data.block_position = -1; |
| if (request->retries-- <= 0) |
| return tape_3590_erp_failed(device, request, irb, -EIO); |
| else |
| return tape_3590_erp_retry(device, request, irb); |
| } |
| #endif |
| |
| sense = (struct tape_3590_sense *) irb->ecw; |
| |
| DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc); |
| |
| /* |
| * First check all RC-QRCs where we want to do something special |
| * - "break": basic error recovery is done |
| * - "goto out:": just print error message if available |
| */ |
| switch (sense->rc_rqc) { |
| |
| case 0x1110: |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_read_buf_log(device, request, irb); |
| |
| case 0x2011: |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_read_alternate(device, request, irb); |
| |
| case 0x2230: |
| case 0x2231: |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_special_interrupt(device, request, irb); |
| case 0x2240: |
| return tape_3590_crypt_error(device, request, irb); |
| |
| case 0x3010: |
| DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n", |
| device->cdev_id); |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); |
| case 0x3012: |
| DBF_EVENT(2, "(%08x): Forward at End of Partition\n", |
| device->cdev_id); |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); |
| case 0x3020: |
| DBF_EVENT(2, "(%08x): End of Data Mark\n", device->cdev_id); |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); |
| |
| case 0x3122: |
| DBF_EVENT(2, "(%08x): Rewind Unload initiated\n", |
| device->cdev_id); |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| case 0x3123: |
| DBF_EVENT(2, "(%08x): Rewind Unload complete\n", |
| device->cdev_id); |
| tape_med_state_set(device, MS_UNLOADED); |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); |
| return tape_3590_erp_basic(device, request, irb, 0); |
| |
| case 0x4010: |
| /* |
| * print additional msg since default msg |
| * "device intervention" is not very meaningfull |
| */ |
| tape_med_state_set(device, MS_UNLOADED); |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); |
| return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); |
| case 0x4012: /* Device Long Busy */ |
| /* XXX: Also use long busy handling here? */ |
| DBF_EVENT(6, "(%08x): LONG BUSY\n", device->cdev_id); |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_basic(device, request, irb, -EBUSY); |
| case 0x4014: |
| DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device->cdev_id); |
| return tape_3590_erp_long_busy(device, request, irb); |
| |
| case 0x5010: |
| if (sense->rac == 0xd0) { |
| /* Swap */ |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_swap(device, request, irb); |
| } |
| if (sense->rac == 0x26) { |
| /* Read Opposite */ |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_read_opposite(device, request, |
| irb); |
| } |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| case 0x5020: |
| case 0x5021: |
| case 0x5022: |
| case 0x5040: |
| case 0x5041: |
| case 0x5042: |
| tape_3590_print_era_msg(device, irb); |
| return tape_3590_erp_swap(device, request, irb); |
| |
| case 0x5110: |
| case 0x5111: |
| return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE); |
| |
| case 0x5120: |
| case 0x1120: |
| tape_med_state_set(device, MS_UNLOADED); |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); |
| return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); |
| |
| case 0x6020: |
| return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE); |
| |
| case 0x8011: |
| return tape_3590_erp_basic(device, request, irb, -EPERM); |
| case 0x8013: |
| dev_warn (&device->cdev->dev, "A different host has privileged" |
| " access to the tape unit\n"); |
| return tape_3590_erp_basic(device, request, irb, -EPERM); |
| default: |
| return tape_3590_erp_basic(device, request, irb, -EIO); |
| } |
| } |
| |
| /* |
| * 3590 interrupt handler: |
| */ |
| static int |
| tape_3590_irq(struct tape_device *device, struct tape_request *request, |
| struct irb *irb) |
| { |
| if (request == NULL) |
| return tape_3590_unsolicited_irq(device, irb); |
| |
| if ((irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) && |
| (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) && |
| (request->op == TO_WRI)) { |
| /* Write at end of volume */ |
| DBF_EVENT(2, "End of volume\n"); |
| return tape_3590_erp_failed(device, request, irb, -ENOSPC); |
| } |
| |
| if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) |
| return tape_3590_unit_check(device, request, irb); |
| |
| if (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) { |
| if (irb->scsw.cmd.dstat == DEV_STAT_UNIT_EXCEP) { |
| if (request->op == TO_FSB || request->op == TO_BSB) |
| request->rescnt++; |
| else |
| DBF_EVENT(5, "Unit Exception!\n"); |
| } |
| |
| return tape_3590_done(device, request); |
| } |
| |
| if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) { |
| DBF_EVENT(2, "cannel end\n"); |
| return TAPE_IO_PENDING; |
| } |
| |
| if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) { |
| DBF_EVENT(2, "Unit Attention when busy..\n"); |
| return TAPE_IO_PENDING; |
| } |
| |
| DBF_EVENT(6, "xunknownirq\n"); |
| tape_dump_sense_dbf(device, request, irb); |
| return TAPE_IO_STOP; |
| } |
| |
| |
| static int tape_3590_read_dev_chars(struct tape_device *device, |
| struct tape_3590_rdc_data *rdc_data) |
| { |
| int rc; |
| struct tape_request *request; |
| |
| request = tape_alloc_request(1, sizeof(*rdc_data)); |
| if (IS_ERR(request)) |
| return PTR_ERR(request); |
| request->op = TO_RDC; |
| tape_ccw_end(request->cpaddr, CCW_CMD_RDC, sizeof(*rdc_data), |
| request->cpdata); |
| rc = tape_do_io(device, request); |
| if (rc == 0) |
| memcpy(rdc_data, request->cpdata, sizeof(*rdc_data)); |
| tape_free_request(request); |
| return rc; |
| } |
| |
| /* |
| * Setup device function |
| */ |
| static int |
| tape_3590_setup_device(struct tape_device *device) |
| { |
| int rc; |
| struct tape_3590_disc_data *data; |
| struct tape_3590_rdc_data *rdc_data; |
| |
| DBF_EVENT(6, "3590 device setup\n"); |
| data = kzalloc(sizeof(struct tape_3590_disc_data), GFP_KERNEL | GFP_DMA); |
| if (data == NULL) |
| return -ENOMEM; |
| data->read_back_op = READ_PREVIOUS; |
| device->discdata = data; |
| |
| rdc_data = kmalloc(sizeof(*rdc_data), GFP_KERNEL | GFP_DMA); |
| if (!rdc_data) { |
| rc = -ENOMEM; |
| goto fail_kmalloc; |
| } |
| rc = tape_3590_read_dev_chars(device, rdc_data); |
| if (rc) { |
| DBF_LH(3, "Read device characteristics failed!\n"); |
| goto fail_rdc_data; |
| } |
| rc = tape_std_assign(device); |
| if (rc) |
| goto fail_rdc_data; |
| if (rdc_data->data[31] == 0x13) { |
| data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK; |
| tape_3592_disable_crypt(device); |
| } else { |
| DBF_EVENT(6, "Device has NO crypto support\n"); |
| } |
| /* Try to find out if medium is loaded */ |
| rc = tape_3590_sense_medium(device); |
| if (rc) { |
| DBF_LH(3, "3590 medium sense returned %d\n", rc); |
| goto fail_rdc_data; |
| } |
| return 0; |
| |
| fail_rdc_data: |
| kfree(rdc_data); |
| fail_kmalloc: |
| kfree(data); |
| return rc; |
| } |
| |
| /* |
| * Cleanup device function |
| */ |
| static void |
| tape_3590_cleanup_device(struct tape_device *device) |
| { |
| flush_workqueue(tape_3590_wq); |
| tape_std_unassign(device); |
| |
| kfree(device->discdata); |
| device->discdata = NULL; |
| } |
| |
| /* |
| * List of 3590 magnetic tape commands. |
| */ |
| static tape_mtop_fn tape_3590_mtop[TAPE_NR_MTOPS] = { |
| [MTRESET] = tape_std_mtreset, |
| [MTFSF] = tape_std_mtfsf, |
| [MTBSF] = tape_std_mtbsf, |
| [MTFSR] = tape_std_mtfsr, |
| [MTBSR] = tape_std_mtbsr, |
| [MTWEOF] = tape_std_mtweof, |
| [MTREW] = tape_std_mtrew, |
| [MTOFFL] = tape_std_mtoffl, |
| [MTNOP] = tape_std_mtnop, |
| [MTRETEN] = tape_std_mtreten, |
| [MTBSFM] = tape_std_mtbsfm, |
| [MTFSFM] = tape_std_mtfsfm, |
| [MTEOM] = tape_std_mteom, |
| [MTERASE] = tape_std_mterase, |
| [MTRAS1] = NULL, |
| [MTRAS2] = NULL, |
| [MTRAS3] = NULL, |
| [MTSETBLK] = tape_std_mtsetblk, |
| [MTSETDENSITY] = NULL, |
| [MTSEEK] = tape_3590_mtseek, |
| [MTTELL] = tape_3590_mttell, |
| [MTSETDRVBUFFER] = NULL, |
| [MTFSS] = NULL, |
| [MTBSS] = NULL, |
| [MTWSM] = NULL, |
| [MTLOCK] = NULL, |
| [MTUNLOCK] = NULL, |
| [MTLOAD] = tape_std_mtload, |
| [MTUNLOAD] = tape_std_mtunload, |
| [MTCOMPRESSION] = tape_std_mtcompression, |
| [MTSETPART] = NULL, |
| [MTMKPART] = NULL |
| }; |
| |
| /* |
| * Tape discipline structure for 3590. |
| */ |
| static struct tape_discipline tape_discipline_3590 = { |
| .owner = THIS_MODULE, |
| .setup_device = tape_3590_setup_device, |
| .cleanup_device = tape_3590_cleanup_device, |
| .process_eov = tape_std_process_eov, |
| .irq = tape_3590_irq, |
| .read_block = tape_std_read_block, |
| .write_block = tape_std_write_block, |
| #ifdef CONFIG_S390_TAPE_BLOCK |
| .bread = tape_3590_bread, |
| .free_bread = tape_3590_free_bread, |
| .check_locate = tape_3590_check_locate, |
| #endif |
| .ioctl_fn = tape_3590_ioctl, |
| .mtop_array = tape_3590_mtop |
| }; |
| |
| static struct ccw_device_id tape_3590_ids[] = { |
| {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590}, |
| {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592}, |
| { /* end of list */ } |
| }; |
| |
| static int |
| tape_3590_online(struct ccw_device *cdev) |
| { |
| return tape_generic_online(dev_get_drvdata(&cdev->dev), |
| &tape_discipline_3590); |
| } |
| |
| static struct ccw_driver tape_3590_driver = { |
| .driver = { |
| .name = "tape_3590", |
| .owner = THIS_MODULE, |
| }, |
| .ids = tape_3590_ids, |
| .probe = tape_generic_probe, |
| .remove = tape_generic_remove, |
| .set_offline = tape_generic_offline, |
| .set_online = tape_3590_online, |
| .freeze = tape_generic_pm_suspend, |
| }; |
| |
| /* |
| * Setup discipline structure. |
| */ |
| static int |
| tape_3590_init(void) |
| { |
| int rc; |
| |
| TAPE_DBF_AREA = debug_register("tape_3590", 2, 2, 4 * sizeof(long)); |
| debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view); |
| #ifdef DBF_LIKE_HELL |
| debug_set_level(TAPE_DBF_AREA, 6); |
| #endif |
| |
| DBF_EVENT(3, "3590 init\n"); |
| |
| tape_3590_wq = alloc_workqueue("tape_3590", 0, 0); |
| if (!tape_3590_wq) |
| return -ENOMEM; |
| |
| /* Register driver for 3590 tapes. */ |
| rc = ccw_driver_register(&tape_3590_driver); |
| if (rc) { |
| destroy_workqueue(tape_3590_wq); |
| DBF_EVENT(3, "3590 init failed\n"); |
| } else |
| DBF_EVENT(3, "3590 registered\n"); |
| return rc; |
| } |
| |
| static void |
| tape_3590_exit(void) |
| { |
| ccw_driver_unregister(&tape_3590_driver); |
| destroy_workqueue(tape_3590_wq); |
| debug_unregister(TAPE_DBF_AREA); |
| } |
| |
| MODULE_DEVICE_TABLE(ccw, tape_3590_ids); |
| MODULE_AUTHOR("(C) 2001,2006 IBM Corporation"); |
| MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(tape_3590_init); |
| module_exit(tape_3590_exit); |