| /* |
| * SME code for cfg80211 |
| * both driver SME event handling and the SME implementation |
| * (for nl80211's connect() and wext) |
| * |
| * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright (C) 2009 Intel Corporation. All rights reserved. |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/wireless.h> |
| #include <linux/export.h> |
| #include <net/iw_handler.h> |
| #include <net/cfg80211.h> |
| #include <net/rtnetlink.h> |
| #include "nl80211.h" |
| #include "reg.h" |
| #include "rdev-ops.h" |
| |
| /* |
| * Software SME in cfg80211, using auth/assoc/deauth calls to the |
| * driver. This is is for implementing nl80211's connect/disconnect |
| * and wireless extensions (if configured.) |
| */ |
| |
| struct cfg80211_conn { |
| struct cfg80211_connect_params params; |
| /* these are sub-states of the _CONNECTING sme_state */ |
| enum { |
| CFG80211_CONN_SCANNING, |
| CFG80211_CONN_SCAN_AGAIN, |
| CFG80211_CONN_AUTHENTICATE_NEXT, |
| CFG80211_CONN_AUTHENTICATING, |
| CFG80211_CONN_AUTH_FAILED, |
| CFG80211_CONN_ASSOCIATE_NEXT, |
| CFG80211_CONN_ASSOCIATING, |
| CFG80211_CONN_ASSOC_FAILED, |
| CFG80211_CONN_DEAUTH, |
| CFG80211_CONN_CONNECTED, |
| } state; |
| u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; |
| u8 *ie; |
| size_t ie_len; |
| bool auto_auth, prev_bssid_valid; |
| }; |
| |
| static void cfg80211_sme_free(struct wireless_dev *wdev) |
| { |
| if (!wdev->conn) |
| return; |
| |
| kfree(wdev->conn->ie); |
| kfree(wdev->conn); |
| wdev->conn = NULL; |
| } |
| |
| static int cfg80211_conn_scan(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_scan_request *request; |
| int n_channels, err; |
| |
| ASSERT_RTNL(); |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (rdev->scan_req || rdev->scan_msg) |
| return -EBUSY; |
| |
| if (wdev->conn->params.channel) |
| n_channels = 1; |
| else |
| n_channels = ieee80211_get_num_supported_channels(wdev->wiphy); |
| |
| request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) + |
| sizeof(request->channels[0]) * n_channels, |
| GFP_KERNEL); |
| if (!request) |
| return -ENOMEM; |
| |
| if (wdev->conn->params.channel) |
| request->channels[0] = wdev->conn->params.channel; |
| else { |
| int i = 0, j; |
| enum ieee80211_band band; |
| struct ieee80211_supported_band *bands; |
| struct ieee80211_channel *channel; |
| |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| bands = wdev->wiphy->bands[band]; |
| if (!bands) |
| continue; |
| for (j = 0; j < bands->n_channels; j++) { |
| channel = &bands->channels[j]; |
| if (channel->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| request->channels[i++] = channel; |
| } |
| request->rates[band] = (1 << bands->n_bitrates) - 1; |
| } |
| n_channels = i; |
| } |
| request->n_channels = n_channels; |
| request->ssids = (void *)&request->channels[n_channels]; |
| request->n_ssids = 1; |
| |
| memcpy(request->ssids[0].ssid, wdev->conn->params.ssid, |
| wdev->conn->params.ssid_len); |
| request->ssids[0].ssid_len = wdev->conn->params.ssid_len; |
| |
| request->wdev = wdev; |
| request->wiphy = &rdev->wiphy; |
| request->scan_start = jiffies; |
| |
| rdev->scan_req = request; |
| |
| err = rdev_scan(rdev, request); |
| if (!err) { |
| wdev->conn->state = CFG80211_CONN_SCANNING; |
| nl80211_send_scan_start(rdev, wdev); |
| dev_hold(wdev->netdev); |
| } else { |
| rdev->scan_req = NULL; |
| kfree(request); |
| } |
| return err; |
| } |
| |
| static int cfg80211_conn_do_work(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_connect_params *params; |
| struct cfg80211_assoc_request req = {}; |
| int err; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (!wdev->conn) |
| return 0; |
| |
| params = &wdev->conn->params; |
| |
| switch (wdev->conn->state) { |
| case CFG80211_CONN_SCANNING: |
| /* didn't find it during scan ... */ |
| return -ENOENT; |
| case CFG80211_CONN_SCAN_AGAIN: |
| return cfg80211_conn_scan(wdev); |
| case CFG80211_CONN_AUTHENTICATE_NEXT: |
| if (WARN_ON(!rdev->ops->auth)) |
| return -EOPNOTSUPP; |
| wdev->conn->state = CFG80211_CONN_AUTHENTICATING; |
| return cfg80211_mlme_auth(rdev, wdev->netdev, |
| params->channel, params->auth_type, |
| params->bssid, |
| params->ssid, params->ssid_len, |
| NULL, 0, |
| params->key, params->key_len, |
| params->key_idx, NULL, 0); |
| case CFG80211_CONN_AUTH_FAILED: |
| return -ENOTCONN; |
| case CFG80211_CONN_ASSOCIATE_NEXT: |
| if (WARN_ON(!rdev->ops->assoc)) |
| return -EOPNOTSUPP; |
| wdev->conn->state = CFG80211_CONN_ASSOCIATING; |
| if (wdev->conn->prev_bssid_valid) |
| req.prev_bssid = wdev->conn->prev_bssid; |
| req.ie = params->ie; |
| req.ie_len = params->ie_len; |
| req.use_mfp = params->mfp != NL80211_MFP_NO; |
| req.crypto = params->crypto; |
| req.flags = params->flags; |
| req.ht_capa = params->ht_capa; |
| req.ht_capa_mask = params->ht_capa_mask; |
| req.vht_capa = params->vht_capa; |
| req.vht_capa_mask = params->vht_capa_mask; |
| |
| err = cfg80211_mlme_assoc(rdev, wdev->netdev, params->channel, |
| params->bssid, params->ssid, |
| params->ssid_len, &req); |
| if (err) |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false); |
| return err; |
| case CFG80211_CONN_ASSOC_FAILED: |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, false); |
| return -ENOTCONN; |
| case CFG80211_CONN_DEAUTH: |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, false); |
| /* free directly, disconnected event already sent */ |
| cfg80211_sme_free(wdev); |
| return 0; |
| default: |
| return 0; |
| } |
| } |
| |
| void cfg80211_conn_work(struct work_struct *work) |
| { |
| struct cfg80211_registered_device *rdev = |
| container_of(work, struct cfg80211_registered_device, conn_work); |
| struct wireless_dev *wdev; |
| u8 bssid_buf[ETH_ALEN], *bssid = NULL; |
| |
| rtnl_lock(); |
| |
| list_for_each_entry(wdev, &rdev->wdev_list, list) { |
| if (!wdev->netdev) |
| continue; |
| |
| wdev_lock(wdev); |
| if (!netif_running(wdev->netdev)) { |
| wdev_unlock(wdev); |
| continue; |
| } |
| if (!wdev->conn || |
| wdev->conn->state == CFG80211_CONN_CONNECTED) { |
| wdev_unlock(wdev); |
| continue; |
| } |
| if (wdev->conn->params.bssid) { |
| memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN); |
| bssid = bssid_buf; |
| } |
| if (cfg80211_conn_do_work(wdev)) { |
| __cfg80211_connect_result( |
| wdev->netdev, bssid, |
| NULL, 0, NULL, 0, |
| WLAN_STATUS_UNSPECIFIED_FAILURE, |
| false, NULL); |
| cfg80211_sme_free(wdev); |
| } |
| wdev_unlock(wdev); |
| } |
| |
| rtnl_unlock(); |
| } |
| |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ |
| static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| u16 capa = WLAN_CAPABILITY_ESS; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (wdev->conn->params.privacy) |
| capa |= WLAN_CAPABILITY_PRIVACY; |
| |
| bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel, |
| wdev->conn->params.bssid, |
| wdev->conn->params.ssid, |
| wdev->conn->params.ssid_len, |
| WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY, |
| capa); |
| if (!bss) |
| return NULL; |
| |
| memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN); |
| wdev->conn->params.bssid = wdev->conn->bssid; |
| wdev->conn->params.channel = bss->channel; |
| wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| |
| return bss; |
| } |
| |
| static void __cfg80211_sme_scan_done(struct net_device *dev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (!wdev->conn) |
| return; |
| |
| if (wdev->conn->state != CFG80211_CONN_SCANNING && |
| wdev->conn->state != CFG80211_CONN_SCAN_AGAIN) |
| return; |
| |
| bss = cfg80211_get_conn_bss(wdev); |
| if (bss) |
| cfg80211_put_bss(&rdev->wiphy, bss); |
| else |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_scan_done(struct net_device *dev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| |
| wdev_lock(wdev); |
| __cfg80211_sme_scan_done(dev); |
| wdev_unlock(wdev); |
| } |
| |
| void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len) |
| { |
| struct wiphy *wiphy = wdev->wiphy; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf; |
| u16 status_code = le16_to_cpu(mgmt->u.auth.status_code); |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED) |
| return; |
| |
| if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG && |
| wdev->conn->auto_auth && |
| wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) { |
| /* select automatically between only open, shared, leap */ |
| switch (wdev->conn->params.auth_type) { |
| case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| if (wdev->connect_keys) |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_SHARED_KEY; |
| else |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_NETWORK_EAP; |
| break; |
| case NL80211_AUTHTYPE_SHARED_KEY: |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_NETWORK_EAP; |
| break; |
| default: |
| /* huh? */ |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| break; |
| } |
| wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| } else if (status_code != WLAN_STATUS_SUCCESS) { |
| __cfg80211_connect_result(wdev->netdev, mgmt->bssid, |
| NULL, 0, NULL, 0, |
| status_code, false, NULL); |
| } else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) { |
| wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| } |
| } |
| |
| bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return false; |
| |
| if (status == WLAN_STATUS_SUCCESS) { |
| wdev->conn->state = CFG80211_CONN_CONNECTED; |
| return false; |
| } |
| |
| if (wdev->conn->prev_bssid_valid) { |
| /* |
| * Some stupid APs don't accept reassoc, so we |
| * need to fall back to trying regular assoc; |
| * return true so no event is sent to userspace. |
| */ |
| wdev->conn->prev_bssid_valid = false; |
| wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| return true; |
| } |
| |
| wdev->conn->state = CFG80211_CONN_ASSOC_FAILED; |
| schedule_work(&rdev->conn_work); |
| return false; |
| } |
| |
| void cfg80211_sme_deauth(struct wireless_dev *wdev) |
| { |
| cfg80211_sme_free(wdev); |
| } |
| |
| void cfg80211_sme_auth_timeout(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_AUTH_FAILED; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_disassoc(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_DEAUTH; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_ASSOC_FAILED; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| static int cfg80211_sme_connect(struct wireless_dev *wdev, |
| struct cfg80211_connect_params *connect, |
| const u8 *prev_bssid) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| int err; |
| |
| if (!rdev->ops->auth || !rdev->ops->assoc) |
| return -EOPNOTSUPP; |
| |
| if (wdev->current_bss) |
| return -EALREADY; |
| |
| if (WARN_ON(wdev->conn)) |
| return -EINPROGRESS; |
| |
| wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL); |
| if (!wdev->conn) |
| return -ENOMEM; |
| |
| /* |
| * Copy all parameters, and treat explicitly IEs, BSSID, SSID. |
| */ |
| memcpy(&wdev->conn->params, connect, sizeof(*connect)); |
| if (connect->bssid) { |
| wdev->conn->params.bssid = wdev->conn->bssid; |
| memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN); |
| } |
| |
| if (connect->ie) { |
| wdev->conn->ie = kmemdup(connect->ie, connect->ie_len, |
| GFP_KERNEL); |
| wdev->conn->params.ie = wdev->conn->ie; |
| if (!wdev->conn->ie) { |
| kfree(wdev->conn); |
| wdev->conn = NULL; |
| return -ENOMEM; |
| } |
| } |
| |
| if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) { |
| wdev->conn->auto_auth = true; |
| /* start with open system ... should mostly work */ |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| } else { |
| wdev->conn->auto_auth = false; |
| } |
| |
| wdev->conn->params.ssid = wdev->ssid; |
| wdev->conn->params.ssid_len = wdev->ssid_len; |
| |
| /* see if we have the bss already */ |
| bss = cfg80211_get_conn_bss(wdev); |
| |
| if (prev_bssid) { |
| memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN); |
| wdev->conn->prev_bssid_valid = true; |
| } |
| |
| /* we're good if we have a matching bss struct */ |
| if (bss) { |
| err = cfg80211_conn_do_work(wdev); |
| cfg80211_put_bss(wdev->wiphy, bss); |
| } else { |
| /* otherwise we'll need to scan for the AP first */ |
| err = cfg80211_conn_scan(wdev); |
| |
| /* |
| * If we can't scan right now, then we need to scan again |
| * after the current scan finished, since the parameters |
| * changed (unless we find a good AP anyway). |
| */ |
| if (err == -EBUSY) { |
| err = 0; |
| wdev->conn->state = CFG80211_CONN_SCAN_AGAIN; |
| } |
| } |
| |
| if (err) |
| cfg80211_sme_free(wdev); |
| |
| return err; |
| } |
| |
| static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| int err; |
| |
| if (!wdev->conn) |
| return 0; |
| |
| if (!rdev->ops->deauth) |
| return -EOPNOTSUPP; |
| |
| if (wdev->conn->state == CFG80211_CONN_SCANNING || |
| wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) { |
| err = 0; |
| goto out; |
| } |
| |
| /* wdev->conn->params.bssid must be set if > SCANNING */ |
| err = cfg80211_mlme_deauth(rdev, wdev->netdev, |
| wdev->conn->params.bssid, |
| NULL, 0, reason, false); |
| out: |
| cfg80211_sme_free(wdev); |
| return err; |
| } |
| |
| /* |
| * code shared for in-device and software SME |
| */ |
| |
| static bool cfg80211_is_all_idle(void) |
| { |
| struct cfg80211_registered_device *rdev; |
| struct wireless_dev *wdev; |
| bool is_all_idle = true; |
| |
| /* |
| * All devices must be idle as otherwise if you are actively |
| * scanning some new beacon hints could be learned and would |
| * count as new regulatory hints. |
| */ |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) { |
| list_for_each_entry(wdev, &rdev->wdev_list, list) { |
| wdev_lock(wdev); |
| if (wdev->conn || wdev->current_bss) |
| is_all_idle = false; |
| wdev_unlock(wdev); |
| } |
| } |
| |
| return is_all_idle; |
| } |
| |
| static void disconnect_work(struct work_struct *work) |
| { |
| rtnl_lock(); |
| if (cfg80211_is_all_idle()) |
| regulatory_hint_disconnect(); |
| rtnl_unlock(); |
| } |
| |
| static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work); |
| |
| |
| /* |
| * API calls for drivers implementing connect/disconnect and |
| * SME event handling |
| */ |
| |
| /* This method must consume bss one way or another */ |
| void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len, |
| u16 status, bool wextev, |
| struct cfg80211_bss *bss) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| const u8 *country_ie; |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) { |
| cfg80211_put_bss(wdev->wiphy, bss); |
| return; |
| } |
| |
| nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, |
| bssid, req_ie, req_ie_len, |
| resp_ie, resp_ie_len, |
| status, GFP_KERNEL); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| if (wextev) { |
| if (req_ie && status == WLAN_STATUS_SUCCESS) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = req_ie_len; |
| wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, req_ie); |
| } |
| |
| if (resp_ie && status == WLAN_STATUS_SUCCESS) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = resp_ie_len; |
| wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, resp_ie); |
| } |
| |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| if (bssid && status == WLAN_STATUS_SUCCESS) { |
| memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN); |
| memcpy(wdev->wext.prev_bssid, bssid, ETH_ALEN); |
| wdev->wext.prev_bssid_valid = true; |
| } |
| wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); |
| } |
| #endif |
| |
| if (!bss && (status == WLAN_STATUS_SUCCESS)) { |
| WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect); |
| bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid, |
| wdev->ssid, wdev->ssid_len, |
| WLAN_CAPABILITY_ESS, |
| WLAN_CAPABILITY_ESS); |
| if (bss) |
| cfg80211_hold_bss(bss_from_pub(bss)); |
| } |
| |
| if (wdev->current_bss) { |
| cfg80211_unhold_bss(wdev->current_bss); |
| cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); |
| wdev->current_bss = NULL; |
| } |
| |
| if (status != WLAN_STATUS_SUCCESS) { |
| kfree(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| wdev->ssid_len = 0; |
| if (bss) { |
| cfg80211_unhold_bss(bss_from_pub(bss)); |
| cfg80211_put_bss(wdev->wiphy, bss); |
| } |
| return; |
| } |
| |
| if (WARN_ON(!bss)) |
| return; |
| |
| wdev->current_bss = bss_from_pub(bss); |
| |
| cfg80211_upload_connect_keys(wdev); |
| |
| rcu_read_lock(); |
| country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY); |
| if (!country_ie) { |
| rcu_read_unlock(); |
| return; |
| } |
| |
| country_ie = kmemdup(country_ie, 2 + country_ie[1], GFP_ATOMIC); |
| rcu_read_unlock(); |
| |
| if (!country_ie) |
| return; |
| |
| /* |
| * ieee80211_bss_get_ie() ensures we can access: |
| * - country_ie + 2, the start of the country ie data, and |
| * - and country_ie[1] which is the IE length |
| */ |
| regulatory_hint_country_ie(wdev->wiphy, bss->channel->band, |
| country_ie + 2, country_ie[1]); |
| kfree(country_ie); |
| } |
| |
| void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len, |
| u16 status, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| |
| ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); |
| if (!ev) |
| return; |
| |
| ev->type = EVENT_CONNECT_RESULT; |
| if (bssid) |
| memcpy(ev->cr.bssid, bssid, ETH_ALEN); |
| if (req_ie_len) { |
| ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev); |
| ev->cr.req_ie_len = req_ie_len; |
| memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len); |
| } |
| if (resp_ie_len) { |
| ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; |
| ev->cr.resp_ie_len = resp_ie_len; |
| memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len); |
| } |
| ev->cr.status = status; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_connect_result); |
| |
| /* Consumes bss object one way or another */ |
| void __cfg80211_roamed(struct wireless_dev *wdev, |
| struct cfg80211_bss *bss, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len) |
| { |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) |
| goto out; |
| |
| if (WARN_ON(!wdev->current_bss)) |
| goto out; |
| |
| cfg80211_unhold_bss(wdev->current_bss); |
| cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); |
| wdev->current_bss = NULL; |
| |
| cfg80211_hold_bss(bss_from_pub(bss)); |
| wdev->current_bss = bss_from_pub(bss); |
| |
| nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy), |
| wdev->netdev, bss->bssid, |
| req_ie, req_ie_len, resp_ie, resp_ie_len, |
| GFP_KERNEL); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| if (req_ie) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = req_ie_len; |
| wireless_send_event(wdev->netdev, IWEVASSOCREQIE, |
| &wrqu, req_ie); |
| } |
| |
| if (resp_ie) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = resp_ie_len; |
| wireless_send_event(wdev->netdev, IWEVASSOCRESPIE, |
| &wrqu, resp_ie); |
| } |
| |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN); |
| memcpy(wdev->wext.prev_bssid, bss->bssid, ETH_ALEN); |
| wdev->wext.prev_bssid_valid = true; |
| wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL); |
| #endif |
| |
| return; |
| out: |
| cfg80211_put_bss(wdev->wiphy, bss); |
| } |
| |
| void cfg80211_roamed(struct net_device *dev, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_bss *bss; |
| |
| bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, wdev->ssid, |
| wdev->ssid_len, WLAN_CAPABILITY_ESS, |
| WLAN_CAPABILITY_ESS); |
| if (WARN_ON(!bss)) |
| return; |
| |
| cfg80211_roamed_bss(dev, bss, req_ie, req_ie_len, resp_ie, |
| resp_ie_len, gfp); |
| } |
| EXPORT_SYMBOL(cfg80211_roamed); |
| |
| /* Consumes bss object one way or another */ |
| void cfg80211_roamed_bss(struct net_device *dev, |
| struct cfg80211_bss *bss, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| |
| if (WARN_ON(!bss)) |
| return; |
| |
| ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); |
| if (!ev) { |
| cfg80211_put_bss(wdev->wiphy, bss); |
| return; |
| } |
| |
| ev->type = EVENT_ROAMED; |
| ev->rm.req_ie = ((u8 *)ev) + sizeof(*ev); |
| ev->rm.req_ie_len = req_ie_len; |
| memcpy((void *)ev->rm.req_ie, req_ie, req_ie_len); |
| ev->rm.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; |
| ev->rm.resp_ie_len = resp_ie_len; |
| memcpy((void *)ev->rm.resp_ie, resp_ie, resp_ie_len); |
| ev->rm.bss = bss; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_roamed_bss); |
| |
| void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, |
| size_t ie_len, u16 reason, bool from_ap) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| int i; |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) |
| return; |
| |
| if (wdev->current_bss) { |
| cfg80211_unhold_bss(wdev->current_bss); |
| cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); |
| } |
| |
| wdev->current_bss = NULL; |
| wdev->ssid_len = 0; |
| |
| nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap); |
| |
| /* |
| * Delete all the keys ... pairwise keys can't really |
| * exist any more anyway, but default keys might. |
| */ |
| if (rdev->ops->del_key) |
| for (i = 0; i < 6; i++) |
| rdev_del_key(rdev, dev, i, false, NULL); |
| |
| rdev_set_qos_map(rdev, dev, NULL); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); |
| wdev->wext.connect.ssid_len = 0; |
| #endif |
| |
| schedule_work(&cfg80211_disconnect_work); |
| } |
| |
| void cfg80211_disconnected(struct net_device *dev, u16 reason, |
| u8 *ie, size_t ie_len, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| |
| ev = kzalloc(sizeof(*ev) + ie_len, gfp); |
| if (!ev) |
| return; |
| |
| ev->type = EVENT_DISCONNECTED; |
| ev->dc.ie = ((u8 *)ev) + sizeof(*ev); |
| ev->dc.ie_len = ie_len; |
| memcpy((void *)ev->dc.ie, ie, ie_len); |
| ev->dc.reason = reason; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_disconnected); |
| |
| /* |
| * API calls for nl80211/wext compatibility code |
| */ |
| int cfg80211_connect(struct cfg80211_registered_device *rdev, |
| struct net_device *dev, |
| struct cfg80211_connect_params *connect, |
| struct cfg80211_cached_keys *connkeys, |
| const u8 *prev_bssid) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| int err; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| if (WARN_ON(wdev->connect_keys)) { |
| kfree(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| } |
| |
| cfg80211_oper_and_ht_capa(&connect->ht_capa_mask, |
| rdev->wiphy.ht_capa_mod_mask); |
| |
| if (connkeys && connkeys->def >= 0) { |
| int idx; |
| u32 cipher; |
| |
| idx = connkeys->def; |
| cipher = connkeys->params[idx].cipher; |
| /* If given a WEP key we may need it for shared key auth */ |
| if (cipher == WLAN_CIPHER_SUITE_WEP40 || |
| cipher == WLAN_CIPHER_SUITE_WEP104) { |
| connect->key_idx = idx; |
| connect->key = connkeys->params[idx].key; |
| connect->key_len = connkeys->params[idx].key_len; |
| |
| /* |
| * If ciphers are not set (e.g. when going through |
| * iwconfig), we have to set them appropriately here. |
| */ |
| if (connect->crypto.cipher_group == 0) |
| connect->crypto.cipher_group = cipher; |
| |
| if (connect->crypto.n_ciphers_pairwise == 0) { |
| connect->crypto.n_ciphers_pairwise = 1; |
| connect->crypto.ciphers_pairwise[0] = cipher; |
| } |
| } |
| } |
| |
| wdev->connect_keys = connkeys; |
| memcpy(wdev->ssid, connect->ssid, connect->ssid_len); |
| wdev->ssid_len = connect->ssid_len; |
| |
| if (!rdev->ops->connect) |
| err = cfg80211_sme_connect(wdev, connect, prev_bssid); |
| else |
| err = rdev_connect(rdev, dev, connect); |
| |
| if (err) { |
| wdev->connect_keys = NULL; |
| wdev->ssid_len = 0; |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int cfg80211_disconnect(struct cfg80211_registered_device *rdev, |
| struct net_device *dev, u16 reason, bool wextev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| int err = 0; |
| |
| ASSERT_WDEV_LOCK(wdev); |
| |
| kfree(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| |
| if (wdev->conn) |
| err = cfg80211_sme_disconnect(wdev, reason); |
| else if (!rdev->ops->disconnect) |
| cfg80211_mlme_down(rdev, dev); |
| else if (wdev->current_bss) |
| err = rdev_disconnect(rdev, dev, reason); |
| |
| return err; |
| } |