| /* |
| * Generic HDLC support routines for Linux |
| * |
| * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| * |
| * Currently supported: |
| * * raw IP-in-HDLC |
| * * Cisco HDLC |
| * * Frame Relay with ANSI or CCITT LMI (both user and network side) |
| * * PPP |
| * * X.25 |
| * |
| * Use sethdlc utility to set line parameters, protocol and PVCs |
| * |
| * How does it work: |
| * - proto.open(), close(), start(), stop() calls are serialized. |
| * The order is: open, [ start, stop ... ] close ... |
| * - proto.start() and stop() are called with spin_lock_irq held. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/errno.h> |
| #include <linux/if_arp.h> |
| #include <linux/init.h> |
| #include <linux/skbuff.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/inetdevice.h> |
| #include <linux/lapb.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/hdlc.h> |
| |
| |
| static const char* version = "HDLC support module revision 1.18"; |
| |
| #undef DEBUG_LINK |
| |
| |
| static int hdlc_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if ((new_mtu < 68) || (new_mtu > HDLC_MAX_MTU)) |
| return -EINVAL; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| |
| |
| static struct net_device_stats *hdlc_get_stats(struct net_device *dev) |
| { |
| return hdlc_stats(dev); |
| } |
| |
| |
| |
| static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev, |
| struct packet_type *p, struct net_device *orig_dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| if (hdlc->proto.netif_rx) |
| return hdlc->proto.netif_rx(skb); |
| |
| hdlc->stats.rx_dropped++; /* Shouldn't happen */ |
| dev_kfree_skb(skb); |
| return NET_RX_DROP; |
| } |
| |
| |
| |
| static void __hdlc_set_carrier_on(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| if (hdlc->proto.start) |
| return hdlc->proto.start(dev); |
| #if 0 |
| #ifdef DEBUG_LINK |
| if (netif_carrier_ok(dev)) |
| printk(KERN_ERR "hdlc_set_carrier_on(): already on\n"); |
| #endif |
| netif_carrier_on(dev); |
| #endif |
| } |
| |
| |
| |
| static void __hdlc_set_carrier_off(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| if (hdlc->proto.stop) |
| return hdlc->proto.stop(dev); |
| |
| #if 0 |
| #ifdef DEBUG_LINK |
| if (!netif_carrier_ok(dev)) |
| printk(KERN_ERR "hdlc_set_carrier_off(): already off\n"); |
| #endif |
| netif_carrier_off(dev); |
| #endif |
| } |
| |
| |
| |
| void hdlc_set_carrier(int on, struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| unsigned long flags; |
| on = on ? 1 : 0; |
| |
| #ifdef DEBUG_LINK |
| printk(KERN_DEBUG "hdlc_set_carrier %i\n", on); |
| #endif |
| |
| spin_lock_irqsave(&hdlc->state_lock, flags); |
| |
| if (hdlc->carrier == on) |
| goto carrier_exit; /* no change in DCD line level */ |
| |
| #ifdef DEBUG_LINK |
| printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off"); |
| #endif |
| hdlc->carrier = on; |
| |
| if (!hdlc->open) |
| goto carrier_exit; |
| |
| if (hdlc->carrier) { |
| printk(KERN_INFO "%s: Carrier detected\n", dev->name); |
| __hdlc_set_carrier_on(dev); |
| } else { |
| printk(KERN_INFO "%s: Carrier lost\n", dev->name); |
| __hdlc_set_carrier_off(dev); |
| } |
| |
| carrier_exit: |
| spin_unlock_irqrestore(&hdlc->state_lock, flags); |
| } |
| |
| |
| |
| /* Must be called by hardware driver when HDLC device is being opened */ |
| int hdlc_open(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| #ifdef DEBUG_LINK |
| printk(KERN_DEBUG "hdlc_open() carrier %i open %i\n", |
| hdlc->carrier, hdlc->open); |
| #endif |
| |
| if (hdlc->proto.id == -1) |
| return -ENOSYS; /* no protocol attached */ |
| |
| if (hdlc->proto.open) { |
| int result = hdlc->proto.open(dev); |
| if (result) |
| return result; |
| } |
| |
| spin_lock_irq(&hdlc->state_lock); |
| |
| if (hdlc->carrier) { |
| printk(KERN_INFO "%s: Carrier detected\n", dev->name); |
| __hdlc_set_carrier_on(dev); |
| } else |
| printk(KERN_INFO "%s: No carrier\n", dev->name); |
| |
| hdlc->open = 1; |
| |
| spin_unlock_irq(&hdlc->state_lock); |
| return 0; |
| } |
| |
| |
| |
| /* Must be called by hardware driver when HDLC device is being closed */ |
| void hdlc_close(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| #ifdef DEBUG_LINK |
| printk(KERN_DEBUG "hdlc_close() carrier %i open %i\n", |
| hdlc->carrier, hdlc->open); |
| #endif |
| |
| spin_lock_irq(&hdlc->state_lock); |
| |
| hdlc->open = 0; |
| if (hdlc->carrier) |
| __hdlc_set_carrier_off(dev); |
| |
| spin_unlock_irq(&hdlc->state_lock); |
| |
| if (hdlc->proto.close) |
| hdlc->proto.close(dev); |
| } |
| |
| |
| |
| #ifndef CONFIG_HDLC_RAW |
| #define hdlc_raw_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| #ifndef CONFIG_HDLC_RAW_ETH |
| #define hdlc_raw_eth_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| #ifndef CONFIG_HDLC_PPP |
| #define hdlc_ppp_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| #ifndef CONFIG_HDLC_CISCO |
| #define hdlc_cisco_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| #ifndef CONFIG_HDLC_FR |
| #define hdlc_fr_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| #ifndef CONFIG_HDLC_X25 |
| #define hdlc_x25_ioctl(dev, ifr) -ENOSYS |
| #endif |
| |
| |
| int hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| unsigned int proto; |
| |
| if (cmd != SIOCWANDEV) |
| return -EINVAL; |
| |
| switch(ifr->ifr_settings.type) { |
| case IF_PROTO_HDLC: |
| case IF_PROTO_HDLC_ETH: |
| case IF_PROTO_PPP: |
| case IF_PROTO_CISCO: |
| case IF_PROTO_FR: |
| case IF_PROTO_X25: |
| proto = ifr->ifr_settings.type; |
| break; |
| |
| default: |
| proto = hdlc->proto.id; |
| } |
| |
| switch(proto) { |
| case IF_PROTO_HDLC: return hdlc_raw_ioctl(dev, ifr); |
| case IF_PROTO_HDLC_ETH: return hdlc_raw_eth_ioctl(dev, ifr); |
| case IF_PROTO_PPP: return hdlc_ppp_ioctl(dev, ifr); |
| case IF_PROTO_CISCO: return hdlc_cisco_ioctl(dev, ifr); |
| case IF_PROTO_FR: return hdlc_fr_ioctl(dev, ifr); |
| case IF_PROTO_X25: return hdlc_x25_ioctl(dev, ifr); |
| default: return -EINVAL; |
| } |
| } |
| |
| void hdlc_setup(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| |
| dev->get_stats = hdlc_get_stats; |
| dev->change_mtu = hdlc_change_mtu; |
| dev->mtu = HDLC_MAX_MTU; |
| |
| dev->type = ARPHRD_RAWHDLC; |
| dev->hard_header_len = 16; |
| |
| dev->flags = IFF_POINTOPOINT | IFF_NOARP; |
| |
| hdlc->proto.id = -1; |
| hdlc->proto.detach = NULL; |
| hdlc->carrier = 1; |
| hdlc->open = 0; |
| spin_lock_init(&hdlc->state_lock); |
| } |
| |
| struct net_device *alloc_hdlcdev(void *priv) |
| { |
| struct net_device *dev; |
| dev = alloc_netdev(sizeof(hdlc_device), "hdlc%d", hdlc_setup); |
| if (dev) |
| dev_to_hdlc(dev)->priv = priv; |
| return dev; |
| } |
| |
| void unregister_hdlc_device(struct net_device *dev) |
| { |
| rtnl_lock(); |
| hdlc_proto_detach(dev_to_hdlc(dev)); |
| unregister_netdevice(dev); |
| rtnl_unlock(); |
| } |
| |
| |
| |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); |
| MODULE_DESCRIPTION("HDLC support module"); |
| MODULE_LICENSE("GPL v2"); |
| |
| EXPORT_SYMBOL(hdlc_open); |
| EXPORT_SYMBOL(hdlc_close); |
| EXPORT_SYMBOL(hdlc_set_carrier); |
| EXPORT_SYMBOL(hdlc_ioctl); |
| EXPORT_SYMBOL(hdlc_setup); |
| EXPORT_SYMBOL(alloc_hdlcdev); |
| EXPORT_SYMBOL(unregister_hdlc_device); |
| |
| static struct packet_type hdlc_packet_type = { |
| .type = __constant_htons(ETH_P_HDLC), |
| .func = hdlc_rcv, |
| }; |
| |
| |
| static int __init hdlc_module_init(void) |
| { |
| printk(KERN_INFO "%s\n", version); |
| dev_add_pack(&hdlc_packet_type); |
| return 0; |
| } |
| |
| |
| |
| static void __exit hdlc_module_exit(void) |
| { |
| dev_remove_pack(&hdlc_packet_type); |
| } |
| |
| |
| module_init(hdlc_module_init); |
| module_exit(hdlc_module_exit); |