| # |
| # Video configuration |
| # |
| |
| menu "Console display driver support" |
| |
| config VGA_CONSOLE |
| bool "VGA text console" if EMBEDDED || !X86 |
| depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE |
| default y |
| help |
| Saying Y here will allow you to use Linux in text mode through a |
| display that complies with the generic VGA standard. Virtually |
| everyone wants that. |
| |
| The program SVGATextMode can be used to utilize SVGA video cards to |
| their full potential in text mode. Download it from |
| <ftp://ibiblio.org/pub/Linux/utils/console/>. |
| |
| Say Y. |
| |
| # if [ "$CONFIG_PCI" = "y" -a "$CONFIG_VGA_CONSOLE" = "y" ]; then |
| # bool ' Allow VGA on any bus?' CONFIG_VGA_HOSE |
| # if [ "$CONFIG_VGA_HOSE" = "y" ]; then |
| # define_bool CONFIG_DUMMY_CONSOLE y |
| # fi |
| # fi |
| |
| config VIDEO_SELECT |
| bool "Video mode selection support" |
| depends on (X86 || X86_64) && VGA_CONSOLE |
| ---help--- |
| This enables support for text mode selection on kernel startup. If |
| you want to take advantage of some high-resolution text mode your |
| card's BIOS offers, but the traditional Linux utilities like |
| SVGATextMode don't, you can say Y here and set the mode using the |
| "vga=" option from your boot loader (lilo or loadlin) or set |
| "vga=ask" which brings up a video mode menu on kernel startup. (Try |
| "man bootparam" or see the documentation of your boot loader about |
| how to pass options to the kernel.) |
| |
| Read the file <file:Documentation/svga.txt> for more information |
| about the Video mode selection support. If unsure, say N. |
| |
| config MDA_CONSOLE |
| depends on !M68K && !PARISC && ISA |
| tristate "MDA text console (dual-headed) (EXPERIMENTAL)" |
| ---help--- |
| Say Y here if you have an old MDA or monochrome Hercules graphics |
| adapter in your system acting as a second head ( = video card). You |
| will then be able to use two monitors with your Linux system. Do not |
| say Y here if your MDA card is the primary card in your system; the |
| normal VGA driver will handle it. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mdacon. |
| |
| If unsure, say N. |
| |
| config SGI_NEWPORT_CONSOLE |
| tristate "SGI Newport Console support" |
| depends on SGI_IP22 |
| help |
| Say Y here if you want the console on the Newport aka XL graphics |
| card of your Indy. Most people say Y here. |
| |
| # bool 'IODC console' CONFIG_IODC_CONSOLE |
| |
| config PROM_CONSOLE |
| bool "PROM console" |
| depends on SPARC32 || SPARC64 |
| help |
| Say Y to build a console driver for Sun machines that uses the |
| terminal emulation built into their console PROMS. |
| |
| config DUMMY_CONSOLE |
| bool |
| depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y |
| default y |
| |
| config DUMMY_CONSOLE_COLUMNS |
| int "Initial number of console screen columns" |
| depends on PARISC && DUMMY_CONSOLE |
| default "160" |
| help |
| The default value is 160, which should fit a 1280x1024 monitor. |
| Select 80 if you use a 640x480 resolution by default. |
| |
| config DUMMY_CONSOLE_ROWS |
| int "Initial number of console screen rows" |
| depends on PARISC && DUMMY_CONSOLE |
| default "64" |
| help |
| The default value is 64, which should fit a 1280x1024 monitor. |
| Select 25 if you use a 640x480 resolution by default. |
| |
| config FRAMEBUFFER_CONSOLE |
| tristate "Framebuffer Console support" |
| depends on FB |
| select CRC32 |
| |
| config STI_CONSOLE |
| tristate "STI text console" |
| depends on PARISC |
| default y |
| help |
| The STI console is the builtin display/keyboard on HP-PARISC |
| machines. Say Y here to build support for it into your kernel. |
| The alternative is to use your primary serial port as a console. |
| |
| config FONTS |
| bool "Select compiled-in fonts" |
| depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE |
| help |
| Say Y here if you would like to use fonts other than the default |
| your frame buffer console usually use. |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about foreign fonts. |
| |
| If unsure, say N (the default choices are safe). |
| |
| config FONT_8x8 |
| bool "VGA 8x8 font" if FONTS |
| depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE |
| default y if !SPARC32 && !SPARC64 && !FONTS |
| help |
| This is the "high resolution" font for the VGA frame buffer (the one |
| provided by the text console 80x50 (and higher) modes). |
| |
| Note that this is a poor quality font. The VGA 8x16 font is quite a |
| lot more readable. |
| |
| Given the resolution provided by the frame buffer device, answer N |
| here is safe. |
| |
| config FONT_8x16 |
| bool "VGA 8x16 font" if FONTS |
| depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON |
| default y if !SPARC32 && !SPARC64 && !FONTS |
| help |
| This is the "high resolution" font for the VGA frame buffer (the one |
| provided by the VGA text console 80x25 mode. |
| |
| If unsure, say Y. |
| |
| config FONT_6x11 |
| bool "Mac console 6x11 font (not supported by all drivers)" if FONTS |
| depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE |
| default y if !SPARC32 && !SPARC64 && !FONTS && MAC |
| help |
| Small console font with Macintosh-style high-half glyphs. Some Mac |
| framebuffer drivers don't support this one at all. |
| |
| config FONT_7x14 |
| bool "console 7x14 font (not supported by all drivers)" if FONTS |
| depends on FRAMEBUFFER_CONSOLE |
| help |
| Console font with characters just a bit smaller than the default. |
| If the standard 8x16 font is a little too big for you, say Y. |
| Otherwise, say N. |
| |
| config FONT_PEARL_8x8 |
| bool "Pearl (old m68k) console 8x8 font" if FONTS |
| depends on FRAMEBUFFER_CONSOLE |
| default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA |
| help |
| Small console font with PC-style control-character and high-half |
| glyphs. |
| |
| config FONT_ACORN_8x8 |
| bool "Acorn console 8x8 font" if FONTS |
| depends on FRAMEBUFFER_CONSOLE |
| default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN |
| help |
| Small console font with PC-style control characters and high-half |
| glyphs. |
| |
| config FONT_MINI_4x6 |
| bool "Mini 4x6 font" |
| depends on !SPARC32 && !SPARC64 && FONTS |
| |
| config FONT_SUN8x16 |
| bool "Sparc console 8x16 font" |
| depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) |
| help |
| This is the high resolution console font for Sun machines. Say Y. |
| |
| config FONT_SUN12x22 |
| bool "Sparc console 12x22 font (not supported by all drivers)" |
| depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) |
| help |
| This is the high resolution console font for Sun machines with very |
| big letters (like the letters used in the SPARC PROM). If the |
| standard font is unreadable for you, say Y, otherwise say N. |
| |
| config FONT_10x18 |
| bool "console 10x18 font (not supported by all drivers)" if FONTS |
| depends on FRAMEBUFFER_CONSOLE |
| help |
| This is a high resolution console font for machines with very |
| big letters. It fits between the sun 12x22 and the normal 8x16 font. |
| If other fonts are too big or too small for you, say Y, otherwise say N. |
| |
| endmenu |
| |