| /* |
| * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk> |
| * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de> |
| * Copyright 2009, Boris Hajduk <boris@hajduk.org> |
| * |
| * ch341.c implements a serial port driver for the Winchiphead CH341. |
| * |
| * The CH341 device can be used to implement an RS232 asynchronous |
| * serial port, an IEEE-1284 parallel printer port or a memory-like |
| * interface. In all cases the CH341 supports an I2C interface as well. |
| * This driver only supports the asynchronous serial interface. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/tty.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| #include <linux/serial.h> |
| #include <asm/unaligned.h> |
| |
| #define DEFAULT_BAUD_RATE 9600 |
| #define DEFAULT_TIMEOUT 1000 |
| |
| /* flags for IO-Bits */ |
| #define CH341_BIT_RTS (1 << 6) |
| #define CH341_BIT_DTR (1 << 5) |
| |
| /******************************/ |
| /* interrupt pipe definitions */ |
| /******************************/ |
| /* always 4 interrupt bytes */ |
| /* first irq byte normally 0x08 */ |
| /* second irq byte base 0x7d + below */ |
| /* third irq byte base 0x94 + below */ |
| /* fourth irq byte normally 0xee */ |
| |
| /* second interrupt byte */ |
| #define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ |
| |
| /* status returned in third interrupt answer byte, inverted in data |
| from irq */ |
| #define CH341_BIT_CTS 0x01 |
| #define CH341_BIT_DSR 0x02 |
| #define CH341_BIT_RI 0x04 |
| #define CH341_BIT_DCD 0x08 |
| #define CH341_BITS_MODEM_STAT 0x0f /* all bits */ |
| |
| /*******************************/ |
| /* baudrate calculation factor */ |
| /*******************************/ |
| #define CH341_BAUDBASE_FACTOR 1532620800 |
| #define CH341_BAUDBASE_DIVMAX 3 |
| |
| /* Break support - the information used to implement this was gleaned from |
| * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato. |
| */ |
| |
| #define CH341_REQ_WRITE_REG 0x9A |
| #define CH341_REQ_READ_REG 0x95 |
| #define CH341_REG_BREAK1 0x05 |
| #define CH341_REG_BREAK2 0x18 |
| #define CH341_NBREAK_BITS_REG1 0x01 |
| #define CH341_NBREAK_BITS_REG2 0x40 |
| |
| |
| static int debug; |
| |
| static const struct usb_device_id id_table[] = { |
| { USB_DEVICE(0x4348, 0x5523) }, |
| { USB_DEVICE(0x1a86, 0x7523) }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| struct ch341_private { |
| spinlock_t lock; /* access lock */ |
| wait_queue_head_t delta_msr_wait; /* wait queue for modem status */ |
| unsigned baud_rate; /* set baud rate */ |
| u8 line_control; /* set line control value RTS/DTR */ |
| u8 line_status; /* active status of modem control inputs */ |
| u8 multi_status_change; /* status changed multiple since last call */ |
| }; |
| |
| static int ch341_control_out(struct usb_device *dev, u8 request, |
| u16 value, u16 index) |
| { |
| int r; |
| dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40, |
| (int)request, (int)value, (int)index); |
| |
| r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, |
| value, index, NULL, 0, DEFAULT_TIMEOUT); |
| |
| return r; |
| } |
| |
| static int ch341_control_in(struct usb_device *dev, |
| u8 request, u16 value, u16 index, |
| char *buf, unsigned bufsize) |
| { |
| int r; |
| dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40, |
| (int)request, (int)value, (int)index, buf, (int)bufsize); |
| |
| r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, |
| value, index, buf, bufsize, DEFAULT_TIMEOUT); |
| return r; |
| } |
| |
| static int ch341_set_baudrate(struct usb_device *dev, |
| struct ch341_private *priv) |
| { |
| short a, b; |
| int r; |
| unsigned long factor; |
| short divisor; |
| |
| dbg("ch341_set_baudrate(%d)", priv->baud_rate); |
| |
| if (!priv->baud_rate) |
| return -EINVAL; |
| factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); |
| divisor = CH341_BAUDBASE_DIVMAX; |
| |
| while ((factor > 0xfff0) && divisor) { |
| factor >>= 3; |
| divisor--; |
| } |
| |
| if (factor > 0xfff0) |
| return -EINVAL; |
| |
| factor = 0x10000 - factor; |
| a = (factor & 0xff00) | divisor; |
| b = factor & 0xff; |
| |
| r = ch341_control_out(dev, 0x9a, 0x1312, a); |
| if (!r) |
| r = ch341_control_out(dev, 0x9a, 0x0f2c, b); |
| |
| return r; |
| } |
| |
| static int ch341_set_handshake(struct usb_device *dev, u8 control) |
| { |
| dbg("ch341_set_handshake(0x%02x)", control); |
| return ch341_control_out(dev, 0xa4, ~control, 0); |
| } |
| |
| static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) |
| { |
| char *buffer; |
| int r; |
| const unsigned size = 8; |
| unsigned long flags; |
| |
| dbg("ch341_get_status()"); |
| |
| buffer = kmalloc(size, GFP_KERNEL); |
| if (!buffer) |
| return -ENOMEM; |
| |
| r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size); |
| if (r < 0) |
| goto out; |
| |
| /* setup the private status if available */ |
| if (r == 2) { |
| r = 0; |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; |
| priv->multi_status_change = 0; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } else |
| r = -EPROTO; |
| |
| out: kfree(buffer); |
| return r; |
| } |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) |
| { |
| char *buffer; |
| int r; |
| const unsigned size = 8; |
| |
| dbg("ch341_configure()"); |
| |
| buffer = kmalloc(size, GFP_KERNEL); |
| if (!buffer) |
| return -ENOMEM; |
| |
| /* expect two bytes 0x27 0x00 */ |
| r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_control_out(dev, 0xa1, 0, 0); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_set_baudrate(dev, priv); |
| if (r < 0) |
| goto out; |
| |
| /* expect two bytes 0x56 0x00 */ |
| r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050); |
| if (r < 0) |
| goto out; |
| |
| /* expect 0xff 0xee */ |
| r = ch341_get_status(dev, priv); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_set_baudrate(dev, priv); |
| if (r < 0) |
| goto out; |
| |
| r = ch341_set_handshake(dev, priv->line_control); |
| if (r < 0) |
| goto out; |
| |
| /* expect 0x9f 0xee */ |
| r = ch341_get_status(dev, priv); |
| |
| out: kfree(buffer); |
| return r; |
| } |
| |
| /* allocate private data */ |
| static int ch341_attach(struct usb_serial *serial) |
| { |
| struct ch341_private *priv; |
| int r; |
| |
| dbg("ch341_attach()"); |
| |
| /* private data */ |
| priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| spin_lock_init(&priv->lock); |
| init_waitqueue_head(&priv->delta_msr_wait); |
| priv->baud_rate = DEFAULT_BAUD_RATE; |
| priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; |
| |
| r = ch341_configure(serial->dev, priv); |
| if (r < 0) |
| goto error; |
| |
| usb_set_serial_port_data(serial->port[0], priv); |
| return 0; |
| |
| error: kfree(priv); |
| return r; |
| } |
| |
| static int ch341_carrier_raised(struct usb_serial_port *port) |
| { |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| if (priv->line_status & CH341_BIT_DCD) |
| return 1; |
| return 0; |
| } |
| |
| static void ch341_dtr_rts(struct usb_serial_port *port, int on) |
| { |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| |
| dbg("%s - port %d", __func__, port->number); |
| /* drop DTR and RTS */ |
| spin_lock_irqsave(&priv->lock, flags); |
| if (on) |
| priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR; |
| else |
| priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| ch341_set_handshake(port->serial->dev, priv->line_control); |
| wake_up_interruptible(&priv->delta_msr_wait); |
| } |
| |
| static void ch341_close(struct usb_serial_port *port) |
| { |
| dbg("%s - port %d", __func__, port->number); |
| |
| usb_serial_generic_close(port); |
| usb_kill_urb(port->interrupt_in_urb); |
| } |
| |
| |
| /* open this device, set default parameters */ |
| static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) |
| { |
| struct usb_serial *serial = port->serial; |
| struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); |
| int r; |
| |
| dbg("ch341_open()"); |
| |
| priv->baud_rate = DEFAULT_BAUD_RATE; |
| |
| r = ch341_configure(serial->dev, priv); |
| if (r) |
| goto out; |
| |
| r = ch341_set_handshake(serial->dev, priv->line_control); |
| if (r) |
| goto out; |
| |
| r = ch341_set_baudrate(serial->dev, priv); |
| if (r) |
| goto out; |
| |
| dbg("%s - submitting interrupt urb", __func__); |
| port->interrupt_in_urb->dev = serial->dev; |
| r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); |
| if (r) { |
| dev_err(&port->dev, "%s - failed submitting interrupt urb," |
| " error %d\n", __func__, r); |
| ch341_close(port); |
| return -EPROTO; |
| } |
| |
| r = usb_serial_generic_open(tty, port); |
| |
| out: return r; |
| } |
| |
| /* Old_termios contains the original termios settings and |
| * tty->termios contains the new setting to be used. |
| */ |
| static void ch341_set_termios(struct tty_struct *tty, |
| struct usb_serial_port *port, struct ktermios *old_termios) |
| { |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned baud_rate; |
| unsigned long flags; |
| |
| dbg("ch341_set_termios()"); |
| |
| baud_rate = tty_get_baud_rate(tty); |
| |
| priv->baud_rate = baud_rate; |
| |
| if (baud_rate) { |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| ch341_set_baudrate(port->serial->dev, priv); |
| } else { |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| ch341_set_handshake(port->serial->dev, priv->line_control); |
| |
| /* Unimplemented: |
| * (cflag & CSIZE) : data bits [5, 8] |
| * (cflag & PARENB) : parity {NONE, EVEN, ODD} |
| * (cflag & CSTOPB) : stop bits [1, 2] |
| */ |
| } |
| |
| static void ch341_break_ctl(struct tty_struct *tty, int break_state) |
| { |
| const uint16_t ch341_break_reg = |
| CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8); |
| struct usb_serial_port *port = tty->driver_data; |
| int r; |
| uint16_t reg_contents; |
| uint8_t *break_reg; |
| |
| dbg("%s()", __func__); |
| |
| break_reg = kmalloc(2, GFP_KERNEL); |
| if (!break_reg) { |
| dev_err(&port->dev, "%s - kmalloc failed\n", __func__); |
| return; |
| } |
| |
| r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, |
| ch341_break_reg, 0, break_reg, 2); |
| if (r < 0) { |
| dev_err(&port->dev, "%s - USB control read error (%d)\n", |
| __func__, r); |
| goto out; |
| } |
| dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", |
| __func__, break_reg[0], break_reg[1]); |
| if (break_state != 0) { |
| dbg("%s - Enter break state requested", __func__); |
| break_reg[0] &= ~CH341_NBREAK_BITS_REG1; |
| break_reg[1] &= ~CH341_NBREAK_BITS_REG2; |
| } else { |
| dbg("%s - Leave break state requested", __func__); |
| break_reg[0] |= CH341_NBREAK_BITS_REG1; |
| break_reg[1] |= CH341_NBREAK_BITS_REG2; |
| } |
| dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", |
| __func__, break_reg[0], break_reg[1]); |
| reg_contents = get_unaligned_le16(break_reg); |
| r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, |
| ch341_break_reg, reg_contents); |
| if (r < 0) |
| dev_err(&port->dev, "%s - USB control write error (%d)\n", |
| __func__, r); |
| out: |
| kfree(break_reg); |
| } |
| |
| static int ch341_tiocmset(struct tty_struct *tty, struct file *file, |
| unsigned int set, unsigned int clear) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| u8 control; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| if (set & TIOCM_RTS) |
| priv->line_control |= CH341_BIT_RTS; |
| if (set & TIOCM_DTR) |
| priv->line_control |= CH341_BIT_DTR; |
| if (clear & TIOCM_RTS) |
| priv->line_control &= ~CH341_BIT_RTS; |
| if (clear & TIOCM_DTR) |
| priv->line_control &= ~CH341_BIT_DTR; |
| control = priv->line_control; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return ch341_set_handshake(port->serial->dev, control); |
| } |
| |
| static void ch341_read_int_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = (struct usb_serial_port *) urb->context; |
| unsigned char *data = urb->transfer_buffer; |
| unsigned int actual_length = urb->actual_length; |
| int status; |
| |
| dbg("%s (%d)", __func__, port->number); |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dbg("%s - urb shutting down with status: %d", __func__, |
| urb->status); |
| return; |
| default: |
| dbg("%s - nonzero urb status received: %d", __func__, |
| urb->status); |
| goto exit; |
| } |
| |
| usb_serial_debug_data(debug, &port->dev, __func__, |
| urb->actual_length, urb->transfer_buffer); |
| |
| if (actual_length >= 4) { |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| u8 prev_line_status = priv->line_status; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; |
| if ((data[1] & CH341_MULT_STAT)) |
| priv->multi_status_change = 1; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) { |
| struct tty_struct *tty = tty_port_tty_get(&port->port); |
| if (tty) |
| usb_serial_handle_dcd_change(port, tty, |
| priv->line_status & CH341_BIT_DCD); |
| tty_kref_put(tty); |
| } |
| |
| wake_up_interruptible(&priv->delta_msr_wait); |
| } |
| |
| exit: |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status) |
| dev_err(&urb->dev->dev, |
| "%s - usb_submit_urb failed with result %d\n", |
| __func__, status); |
| } |
| |
| static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) |
| { |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| u8 prevstatus; |
| u8 status; |
| u8 changed; |
| u8 multi_change = 0; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| prevstatus = priv->line_status; |
| priv->multi_status_change = 0; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| while (!multi_change) { |
| interruptible_sleep_on(&priv->delta_msr_wait); |
| /* see if a signal did it */ |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| status = priv->line_status; |
| multi_change = priv->multi_status_change; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| changed = prevstatus ^ status; |
| |
| if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) || |
| ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) || |
| ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) || |
| ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) { |
| return 0; |
| } |
| prevstatus = status; |
| } |
| |
| return 0; |
| } |
| |
| /*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ |
| static int ch341_ioctl(struct tty_struct *tty, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); |
| |
| switch (cmd) { |
| case TIOCMIWAIT: |
| dbg("%s (%d) TIOCMIWAIT", __func__, port->number); |
| return wait_modem_info(port, arg); |
| |
| default: |
| dbg("%s not supported = 0x%04x", __func__, cmd); |
| break; |
| } |
| |
| return -ENOIOCTLCMD; |
| } |
| |
| static int ch341_tiocmget(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct ch341_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| u8 mcr; |
| u8 status; |
| unsigned int result; |
| |
| dbg("%s (%d)", __func__, port->number); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| mcr = priv->line_control; |
| status = priv->line_status; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0) |
| | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0) |
| | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0) |
| | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0) |
| | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) |
| | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); |
| |
| dbg("%s - result = %x", __func__, result); |
| |
| return result; |
| } |
| |
| |
| static int ch341_reset_resume(struct usb_interface *intf) |
| { |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct usb_serial *serial = NULL; |
| struct ch341_private *priv; |
| |
| serial = usb_get_intfdata(intf); |
| priv = usb_get_serial_port_data(serial->port[0]); |
| |
| /*reconfigure ch341 serial port after bus-reset*/ |
| ch341_configure(dev, priv); |
| |
| usb_serial_resume(intf); |
| |
| return 0; |
| } |
| |
| static struct usb_driver ch341_driver = { |
| .name = "ch341", |
| .probe = usb_serial_probe, |
| .disconnect = usb_serial_disconnect, |
| .suspend = usb_serial_suspend, |
| .resume = usb_serial_resume, |
| .reset_resume = ch341_reset_resume, |
| .id_table = id_table, |
| .no_dynamic_id = 1, |
| .supports_autosuspend = 1, |
| }; |
| |
| static struct usb_serial_driver ch341_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "ch341-uart", |
| }, |
| .id_table = id_table, |
| .usb_driver = &ch341_driver, |
| .num_ports = 1, |
| .open = ch341_open, |
| .dtr_rts = ch341_dtr_rts, |
| .carrier_raised = ch341_carrier_raised, |
| .close = ch341_close, |
| .ioctl = ch341_ioctl, |
| .set_termios = ch341_set_termios, |
| .break_ctl = ch341_break_ctl, |
| .tiocmget = ch341_tiocmget, |
| .tiocmset = ch341_tiocmset, |
| .read_int_callback = ch341_read_int_callback, |
| .attach = ch341_attach, |
| }; |
| |
| static int __init ch341_init(void) |
| { |
| int retval; |
| |
| retval = usb_serial_register(&ch341_device); |
| if (retval) |
| return retval; |
| retval = usb_register(&ch341_driver); |
| if (retval) |
| usb_serial_deregister(&ch341_device); |
| return retval; |
| } |
| |
| static void __exit ch341_exit(void) |
| { |
| usb_deregister(&ch341_driver); |
| usb_serial_deregister(&ch341_device); |
| } |
| |
| module_init(ch341_init); |
| module_exit(ch341_exit); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debug enabled or not"); |
| |
| /* EOF ch341.c */ |