| /* |
| * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview |
| * I2C address is allways 0xC0. |
| * |
| * |
| * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@infradead.org) |
| * This code is placed under the terms of the GNU General Public License |
| * |
| * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa |
| * from their contributions on DScaler. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/videodev.h> |
| #include "tuner-i2c.h" |
| #include "tea5767.h" |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable verbose debug messages"); |
| |
| /*****************************************************************************/ |
| |
| struct tea5767_priv { |
| struct tuner_i2c_props i2c_props; |
| u32 frequency; |
| struct tea5767_ctrl ctrl; |
| }; |
| |
| /*****************************************************************************/ |
| |
| /****************************** |
| * Write mode register values * |
| ******************************/ |
| |
| /* First register */ |
| #define TEA5767_MUTE 0x80 /* Mutes output */ |
| #define TEA5767_SEARCH 0x40 /* Activates station search */ |
| /* Bits 0-5 for divider MSB */ |
| |
| /* Second register */ |
| /* Bits 0-7 for divider LSB */ |
| |
| /* Third register */ |
| |
| /* Station search from botton to up */ |
| #define TEA5767_SEARCH_UP 0x80 |
| |
| /* Searches with ADC output = 10 */ |
| #define TEA5767_SRCH_HIGH_LVL 0x60 |
| |
| /* Searches with ADC output = 10 */ |
| #define TEA5767_SRCH_MID_LVL 0x40 |
| |
| /* Searches with ADC output = 5 */ |
| #define TEA5767_SRCH_LOW_LVL 0x20 |
| |
| /* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */ |
| #define TEA5767_HIGH_LO_INJECT 0x10 |
| |
| /* Disable stereo */ |
| #define TEA5767_MONO 0x08 |
| |
| /* Disable right channel and turns to mono */ |
| #define TEA5767_MUTE_RIGHT 0x04 |
| |
| /* Disable left channel and turns to mono */ |
| #define TEA5767_MUTE_LEFT 0x02 |
| |
| #define TEA5767_PORT1_HIGH 0x01 |
| |
| /* Fourth register */ |
| #define TEA5767_PORT2_HIGH 0x80 |
| /* Chips stops working. Only I2C bus remains on */ |
| #define TEA5767_STDBY 0x40 |
| |
| /* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */ |
| #define TEA5767_JAPAN_BAND 0x20 |
| |
| /* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */ |
| #define TEA5767_XTAL_32768 0x10 |
| |
| /* Cuts weak signals */ |
| #define TEA5767_SOFT_MUTE 0x08 |
| |
| /* Activates high cut control */ |
| #define TEA5767_HIGH_CUT_CTRL 0x04 |
| |
| /* Activates stereo noise control */ |
| #define TEA5767_ST_NOISE_CTL 0x02 |
| |
| /* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */ |
| #define TEA5767_SRCH_IND 0x01 |
| |
| /* Fifth register */ |
| |
| /* By activating, it will use Xtal at 13 MHz as reference for divider */ |
| #define TEA5767_PLLREF_ENABLE 0x80 |
| |
| /* By activating, deemphasis=50, or else, deemphasis of 50us */ |
| #define TEA5767_DEEMPH_75 0X40 |
| |
| /***************************** |
| * Read mode register values * |
| *****************************/ |
| |
| /* First register */ |
| #define TEA5767_READY_FLAG_MASK 0x80 |
| #define TEA5767_BAND_LIMIT_MASK 0X40 |
| /* Bits 0-5 for divider MSB after search or preset */ |
| |
| /* Second register */ |
| /* Bits 0-7 for divider LSB after search or preset */ |
| |
| /* Third register */ |
| #define TEA5767_STEREO_MASK 0x80 |
| #define TEA5767_IF_CNTR_MASK 0x7f |
| |
| /* Fourth register */ |
| #define TEA5767_ADC_LEVEL_MASK 0xf0 |
| |
| /* should be 0 */ |
| #define TEA5767_CHIP_ID_MASK 0x0f |
| |
| /* Fifth register */ |
| /* Reserved for future extensions */ |
| #define TEA5767_RESERVED_MASK 0xff |
| |
| /*****************************************************************************/ |
| |
| static void tea5767_status_dump(struct tea5767_priv *priv, |
| unsigned char *buffer) |
| { |
| unsigned int div, frq; |
| |
| if (TEA5767_READY_FLAG_MASK & buffer[0]) |
| tuner_info("Ready Flag ON\n"); |
| else |
| tuner_info("Ready Flag OFF\n"); |
| |
| if (TEA5767_BAND_LIMIT_MASK & buffer[0]) |
| tuner_info("Tuner at band limit\n"); |
| else |
| tuner_info("Tuner not at band limit\n"); |
| |
| div = ((buffer[0] & 0x3f) << 8) | buffer[1]; |
| |
| switch (priv->ctrl.xtal_freq) { |
| case TEA5767_HIGH_LO_13MHz: |
| frq = (div * 50000 - 700000 - 225000) / 4; /* Freq in KHz */ |
| break; |
| case TEA5767_LOW_LO_13MHz: |
| frq = (div * 50000 + 700000 + 225000) / 4; /* Freq in KHz */ |
| break; |
| case TEA5767_LOW_LO_32768: |
| frq = (div * 32768 + 700000 + 225000) / 4; /* Freq in KHz */ |
| break; |
| case TEA5767_HIGH_LO_32768: |
| default: |
| frq = (div * 32768 - 700000 - 225000) / 4; /* Freq in KHz */ |
| break; |
| } |
| buffer[0] = (div >> 8) & 0x3f; |
| buffer[1] = div & 0xff; |
| |
| tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n", |
| frq / 1000, frq % 1000, div); |
| |
| if (TEA5767_STEREO_MASK & buffer[2]) |
| tuner_info("Stereo\n"); |
| else |
| tuner_info("Mono\n"); |
| |
| tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK); |
| |
| tuner_info("ADC Level = %d\n", |
| (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4); |
| |
| tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK)); |
| |
| tuner_info("Reserved = 0x%02x\n", |
| (buffer[4] & TEA5767_RESERVED_MASK)); |
| } |
| |
| /* Freq should be specifyed at 62.5 Hz */ |
| static int set_radio_freq(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| unsigned int frq = params->frequency; |
| unsigned char buffer[5]; |
| unsigned div; |
| int rc; |
| |
| tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000); |
| |
| buffer[2] = 0; |
| |
| if (priv->ctrl.port1) |
| buffer[2] |= TEA5767_PORT1_HIGH; |
| |
| if (params->audmode == V4L2_TUNER_MODE_MONO) { |
| tuner_dbg("TEA5767 set to mono\n"); |
| buffer[2] |= TEA5767_MONO; |
| } else { |
| tuner_dbg("TEA5767 set to stereo\n"); |
| } |
| |
| |
| buffer[3] = 0; |
| |
| if (priv->ctrl.port2) |
| buffer[3] |= TEA5767_PORT2_HIGH; |
| |
| if (priv->ctrl.high_cut) |
| buffer[3] |= TEA5767_HIGH_CUT_CTRL; |
| |
| if (priv->ctrl.st_noise) |
| buffer[3] |= TEA5767_ST_NOISE_CTL; |
| |
| if (priv->ctrl.soft_mute) |
| buffer[3] |= TEA5767_SOFT_MUTE; |
| |
| if (priv->ctrl.japan_band) |
| buffer[3] |= TEA5767_JAPAN_BAND; |
| |
| buffer[4] = 0; |
| |
| if (priv->ctrl.deemph_75) |
| buffer[4] |= TEA5767_DEEMPH_75; |
| |
| if (priv->ctrl.pllref) |
| buffer[4] |= TEA5767_PLLREF_ENABLE; |
| |
| |
| /* Rounds freq to next decimal value - for 62.5 KHz step */ |
| /* frq = 20*(frq/16)+radio_frq[frq%16]; */ |
| |
| switch (priv->ctrl.xtal_freq) { |
| case TEA5767_HIGH_LO_13MHz: |
| tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n"); |
| buffer[2] |= TEA5767_HIGH_LO_INJECT; |
| div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000; |
| break; |
| case TEA5767_LOW_LO_13MHz: |
| tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n"); |
| |
| div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000; |
| break; |
| case TEA5767_LOW_LO_32768: |
| tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n"); |
| buffer[3] |= TEA5767_XTAL_32768; |
| /* const 700=4000*175 Khz - to adjust freq to right value */ |
| div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15; |
| break; |
| case TEA5767_HIGH_LO_32768: |
| default: |
| tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n"); |
| |
| buffer[2] |= TEA5767_HIGH_LO_INJECT; |
| buffer[3] |= TEA5767_XTAL_32768; |
| div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15; |
| break; |
| } |
| buffer[0] = (div >> 8) & 0x3f; |
| buffer[1] = div & 0xff; |
| |
| if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5))) |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); |
| |
| if (debug) { |
| if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); |
| else |
| tea5767_status_dump(priv, buffer); |
| } |
| |
| priv->frequency = frq * 125 / 2; |
| |
| return 0; |
| } |
| |
| static int tea5767_read_status(struct dvb_frontend *fe, char *buffer) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| int rc; |
| |
| memset(buffer, 0, 5); |
| if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) { |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); |
| return -EREMOTEIO; |
| } |
| |
| return 0; |
| } |
| |
| static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| |
| int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8); |
| |
| tuner_dbg("Signal strength: %d\n", signal); |
| |
| return signal; |
| } |
| |
| static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| |
| int stereo = buffer[2] & TEA5767_STEREO_MASK; |
| |
| tuner_dbg("Radio ST GET = %02x\n", stereo); |
| |
| return (stereo ? V4L2_TUNER_SUB_STEREO : 0); |
| } |
| |
| static int tea5767_get_status(struct dvb_frontend *fe, u32 *status) |
| { |
| unsigned char buffer[5]; |
| |
| *status = 0; |
| |
| if (0 == tea5767_read_status(fe, buffer)) { |
| if (tea5767_signal(fe, buffer)) |
| *status = TUNER_STATUS_LOCKED; |
| if (tea5767_stereo(fe, buffer)) |
| *status |= TUNER_STATUS_STEREO; |
| } |
| |
| return 0; |
| } |
| |
| static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| unsigned char buffer[5]; |
| |
| *strength = 0; |
| |
| if (0 == tea5767_read_status(fe, buffer)) |
| *strength = tea5767_signal(fe, buffer); |
| |
| return 0; |
| } |
| |
| static int tea5767_standby(struct dvb_frontend *fe) |
| { |
| unsigned char buffer[5]; |
| struct tea5767_priv *priv = fe->tuner_priv; |
| unsigned div, rc; |
| |
| div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */ |
| buffer[0] = (div >> 8) & 0x3f; |
| buffer[1] = div & 0xff; |
| buffer[2] = TEA5767_PORT1_HIGH; |
| buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | |
| TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY; |
| buffer[4] = 0; |
| |
| if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5))) |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); |
| |
| return 0; |
| } |
| |
| int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) |
| { |
| struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr }; |
| unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| int rc; |
| |
| if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) { |
| printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc); |
| return -EINVAL; |
| } |
| |
| /* If all bytes are the same then it's a TV tuner and not a tea5767 */ |
| if (buffer[0] == buffer[1] && buffer[0] == buffer[2] && |
| buffer[0] == buffer[3] && buffer[0] == buffer[4]) { |
| printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n"); |
| return -EINVAL; |
| } |
| |
| /* Status bytes: |
| * Byte 4: bit 3:1 : CI (Chip Identification) == 0 |
| * bit 0 : internally set to 0 |
| * Byte 5: bit 7:0 : == 0 |
| */ |
| if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) { |
| printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n"); |
| return -EINVAL; |
| } |
| |
| |
| return 0; |
| } |
| |
| static int tea5767_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| |
| return 0; |
| } |
| |
| static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| *frequency = priv->frequency; |
| |
| return 0; |
| } |
| |
| static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg) |
| { |
| struct tea5767_priv *priv = fe->tuner_priv; |
| |
| memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl)); |
| |
| return 0; |
| } |
| |
| static struct dvb_tuner_ops tea5767_tuner_ops = { |
| .info = { |
| .name = "tea5767", // Philips TEA5767HN FM Radio |
| }, |
| |
| .set_analog_params = set_radio_freq, |
| .set_config = tea5767_set_config, |
| .sleep = tea5767_standby, |
| .release = tea5767_release, |
| .get_frequency = tea5767_get_frequency, |
| .get_status = tea5767_get_status, |
| .get_rf_strength = tea5767_get_rf_strength, |
| }; |
| |
| struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe, |
| struct i2c_adapter* i2c_adap, |
| u8 i2c_addr) |
| { |
| struct tea5767_priv *priv = NULL; |
| |
| priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return NULL; |
| fe->tuner_priv = priv; |
| |
| priv->i2c_props.addr = i2c_addr; |
| priv->i2c_props.adap = i2c_adap; |
| priv->i2c_props.name = "tea5767"; |
| |
| priv->ctrl.xtal_freq = TEA5767_HIGH_LO_32768; |
| priv->ctrl.port1 = 1; |
| priv->ctrl.port2 = 1; |
| priv->ctrl.high_cut = 1; |
| priv->ctrl.st_noise = 1; |
| priv->ctrl.japan_band = 1; |
| |
| memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio"); |
| |
| return fe; |
| } |
| |
| EXPORT_SYMBOL_GPL(tea5767_attach); |
| EXPORT_SYMBOL_GPL(tea5767_autodetection); |
| |
| MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); |
| MODULE_LICENSE("GPL"); |