| if ARCH_PXA |
| |
| menu "Intel PXA2xx Implementations" |
| |
| choice |
| prompt "Select target board" |
| |
| config ARCH_LUBBOCK |
| bool "Intel DBPXA250 Development Platform" |
| select PXA25x |
| select SA1111 |
| |
| config MACH_LOGICPD_PXA270 |
| bool "LogicPD PXA270 Card Engine Development Platform" |
| select PXA27x |
| select IWMMXT |
| |
| config MACH_MAINSTONE |
| bool "Intel HCDDBBVA0 Development Platform" |
| select PXA27x |
| select IWMMXT |
| |
| config ARCH_PXA_IDP |
| bool "Accelent Xscale IDP" |
| select PXA25x |
| |
| config PXA_SHARPSL |
| bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" |
| select SHARP_SCOOP |
| select SHARP_PARAM |
| help |
| Say Y here if you intend to run this kernel on a |
| Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), |
| SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), |
| SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) |
| handheld computer. |
| |
| config MACH_TRIZEPS4 |
| bool "Keith und Koep Trizeps4 DIMM-Module" |
| select PXA27x |
| |
| endchoice |
| |
| if PXA_SHARPSL |
| |
| choice |
| prompt "Select target Sharp Zaurus device range" |
| |
| config PXA_SHARPSL_25x |
| bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" |
| select PXA25x |
| |
| config PXA_SHARPSL_27x |
| bool "Sharp PXA270 models (SL-Cxx00)" |
| select PXA27x |
| select IWMMXT |
| |
| endchoice |
| |
| endif |
| |
| if MACH_TRIZEPS4 |
| |
| choice |
| prompt "Select base board for Trizeps 4 module" |
| |
| config MACH_TRIZEPS4_CONXS |
| bool "ConXS Eval Board" |
| |
| config MACH_TRIZEPS4_ANY |
| bool "another Board" |
| |
| endchoice |
| |
| endif |
| |
| endmenu |
| |
| config MACH_POODLE |
| bool "Enable Sharp SL-5600 (Poodle) Support" |
| depends PXA_SHARPSL_25x |
| select SHARP_LOCOMO |
| select PXA_SSP |
| |
| config MACH_CORGI |
| bool "Enable Sharp SL-C700 (Corgi) Support" |
| depends PXA_SHARPSL_25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_SHEPHERD |
| bool "Enable Sharp SL-C750 (Shepherd) Support" |
| depends PXA_SHARPSL_25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_HUSKY |
| bool "Enable Sharp SL-C760 (Husky) Support" |
| depends PXA_SHARPSL_25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_AKITA |
| bool "Enable Sharp SL-1000 (Akita) Support" |
| depends PXA_SHARPSL_27x |
| select PXA_SHARP_Cxx00 |
| select MACH_SPITZ |
| select I2C |
| select I2C_PXA |
| |
| config MACH_SPITZ |
| bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" |
| depends PXA_SHARPSL_27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_BORZOI |
| bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" |
| depends PXA_SHARPSL_27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_TOSA |
| bool "Enable Sharp SL-6000x (Tosa) Support" |
| depends PXA_SHARPSL_25x |
| |
| config PXA25x |
| bool |
| help |
| Select code specific to PXA21x/25x/26x variants |
| |
| config PXA27x |
| bool |
| help |
| Select code specific to PXA27x variants |
| |
| config IWMMXT |
| bool |
| help |
| Enable support for iWMMXt |
| |
| config PXA_SHARP_C7xx |
| bool |
| select PXA_SSP |
| select SHARPSL_PM |
| help |
| Enable support for all Sharp C7xx models |
| |
| config PXA_SHARP_Cxx00 |
| bool |
| select PXA_SSP |
| select SHARPSL_PM |
| help |
| Enable common support for Sharp Cxx00 models |
| |
| config PXA_SSP |
| tristate |
| help |
| Enable support for PXA2xx SSP ports |
| endif |