| /* QLogic qed NIC Driver |
| * Copyright (c) 2015-2017 QLogic Corporation |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and /or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #ifndef _QED_CHAIN_H |
| #define _QED_CHAIN_H |
| |
| #include <linux/types.h> |
| #include <asm/byteorder.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/qed/common_hsi.h> |
| |
| enum qed_chain_mode { |
| /* Each Page contains a next pointer at its end */ |
| QED_CHAIN_MODE_NEXT_PTR, |
| |
| /* Chain is a single page (next ptr) is unrequired */ |
| QED_CHAIN_MODE_SINGLE, |
| |
| /* Page pointers are located in a side list */ |
| QED_CHAIN_MODE_PBL, |
| }; |
| |
| enum qed_chain_use_mode { |
| QED_CHAIN_USE_TO_PRODUCE, /* Chain starts empty */ |
| QED_CHAIN_USE_TO_CONSUME, /* Chain starts full */ |
| QED_CHAIN_USE_TO_CONSUME_PRODUCE, /* Chain starts empty */ |
| }; |
| |
| enum qed_chain_cnt_type { |
| /* The chain's size/prod/cons are kept in 16-bit variables */ |
| QED_CHAIN_CNT_TYPE_U16, |
| |
| /* The chain's size/prod/cons are kept in 32-bit variables */ |
| QED_CHAIN_CNT_TYPE_U32, |
| }; |
| |
| struct qed_chain_next { |
| struct regpair next_phys; |
| void *next_virt; |
| }; |
| |
| struct qed_chain_pbl_u16 { |
| u16 prod_page_idx; |
| u16 cons_page_idx; |
| }; |
| |
| struct qed_chain_pbl_u32 { |
| u32 prod_page_idx; |
| u32 cons_page_idx; |
| }; |
| |
| struct qed_chain_ext_pbl { |
| dma_addr_t p_pbl_phys; |
| void *p_pbl_virt; |
| }; |
| |
| struct qed_chain_u16 { |
| /* Cyclic index of next element to produce/consme */ |
| u16 prod_idx; |
| u16 cons_idx; |
| }; |
| |
| struct qed_chain_u32 { |
| /* Cyclic index of next element to produce/consme */ |
| u32 prod_idx; |
| u32 cons_idx; |
| }; |
| |
| struct addr_tbl_entry { |
| void *virt_addr; |
| dma_addr_t dma_map; |
| }; |
| |
| struct qed_chain { |
| /* fastpath portion of the chain - required for commands such |
| * as produce / consume. |
| */ |
| /* Point to next element to produce/consume */ |
| void *p_prod_elem; |
| void *p_cons_elem; |
| |
| /* Fastpath portions of the PBL [if exists] */ |
| struct { |
| /* Table for keeping the virtual and physical addresses of the |
| * chain pages, respectively to the physical addresses |
| * in the pbl table. |
| */ |
| struct addr_tbl_entry *pp_addr_tbl; |
| |
| union { |
| struct qed_chain_pbl_u16 u16; |
| struct qed_chain_pbl_u32 u32; |
| } c; |
| } pbl; |
| |
| union { |
| struct qed_chain_u16 chain16; |
| struct qed_chain_u32 chain32; |
| } u; |
| |
| /* Capacity counts only usable elements */ |
| u32 capacity; |
| u32 page_cnt; |
| |
| enum qed_chain_mode mode; |
| |
| /* Elements information for fast calculations */ |
| u16 elem_per_page; |
| u16 elem_per_page_mask; |
| u16 elem_size; |
| u16 next_page_mask; |
| u16 usable_per_page; |
| u8 elem_unusable; |
| |
| u8 cnt_type; |
| |
| /* Slowpath of the chain - required for initialization and destruction, |
| * but isn't involved in regular functionality. |
| */ |
| |
| /* Base address of a pre-allocated buffer for pbl */ |
| struct { |
| dma_addr_t p_phys_table; |
| void *p_virt_table; |
| } pbl_sp; |
| |
| /* Address of first page of the chain - the address is required |
| * for fastpath operation [consume/produce] but only for the the SINGLE |
| * flavour which isn't considered fastpath [== SPQ]. |
| */ |
| void *p_virt_addr; |
| dma_addr_t p_phys_addr; |
| |
| /* Total number of elements [for entire chain] */ |
| u32 size; |
| |
| u8 intended_use; |
| |
| bool b_external_pbl; |
| }; |
| |
| #define QED_CHAIN_PBL_ENTRY_SIZE (8) |
| #define QED_CHAIN_PAGE_SIZE (0x1000) |
| #define ELEMS_PER_PAGE(elem_size) (QED_CHAIN_PAGE_SIZE / (elem_size)) |
| |
| #define UNUSABLE_ELEMS_PER_PAGE(elem_size, mode) \ |
| (((mode) == QED_CHAIN_MODE_NEXT_PTR) ? \ |
| (u8)(1 + ((sizeof(struct qed_chain_next) - 1) / \ |
| (elem_size))) : 0) |
| |
| #define USABLE_ELEMS_PER_PAGE(elem_size, mode) \ |
| ((u32)(ELEMS_PER_PAGE(elem_size) - \ |
| UNUSABLE_ELEMS_PER_PAGE(elem_size, mode))) |
| |
| #define QED_CHAIN_PAGE_CNT(elem_cnt, elem_size, mode) \ |
| DIV_ROUND_UP(elem_cnt, USABLE_ELEMS_PER_PAGE(elem_size, mode)) |
| |
| #define is_chain_u16(p) ((p)->cnt_type == QED_CHAIN_CNT_TYPE_U16) |
| #define is_chain_u32(p) ((p)->cnt_type == QED_CHAIN_CNT_TYPE_U32) |
| |
| /* Accessors */ |
| static inline u16 qed_chain_get_prod_idx(struct qed_chain *p_chain) |
| { |
| return p_chain->u.chain16.prod_idx; |
| } |
| |
| static inline u16 qed_chain_get_cons_idx(struct qed_chain *p_chain) |
| { |
| return p_chain->u.chain16.cons_idx; |
| } |
| |
| static inline u32 qed_chain_get_cons_idx_u32(struct qed_chain *p_chain) |
| { |
| return p_chain->u.chain32.cons_idx; |
| } |
| |
| static inline u16 qed_chain_get_elem_left(struct qed_chain *p_chain) |
| { |
| u16 elem_per_page = p_chain->elem_per_page; |
| u32 prod = p_chain->u.chain16.prod_idx; |
| u32 cons = p_chain->u.chain16.cons_idx; |
| u16 used; |
| |
| if (prod < cons) |
| prod += (u32)U16_MAX + 1; |
| |
| used = (u16)(prod - cons); |
| if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) |
| used -= prod / elem_per_page - cons / elem_per_page; |
| |
| return (u16)(p_chain->capacity - used); |
| } |
| |
| static inline u32 qed_chain_get_elem_left_u32(struct qed_chain *p_chain) |
| { |
| u16 elem_per_page = p_chain->elem_per_page; |
| u64 prod = p_chain->u.chain32.prod_idx; |
| u64 cons = p_chain->u.chain32.cons_idx; |
| u32 used; |
| |
| if (prod < cons) |
| prod += (u64)U32_MAX + 1; |
| |
| used = (u32)(prod - cons); |
| if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) |
| used -= (u32)(prod / elem_per_page - cons / elem_per_page); |
| |
| return p_chain->capacity - used; |
| } |
| |
| static inline u16 qed_chain_get_usable_per_page(struct qed_chain *p_chain) |
| { |
| return p_chain->usable_per_page; |
| } |
| |
| static inline u8 qed_chain_get_unusable_per_page(struct qed_chain *p_chain) |
| { |
| return p_chain->elem_unusable; |
| } |
| |
| static inline u32 qed_chain_get_page_cnt(struct qed_chain *p_chain) |
| { |
| return p_chain->page_cnt; |
| } |
| |
| static inline dma_addr_t qed_chain_get_pbl_phys(struct qed_chain *p_chain) |
| { |
| return p_chain->pbl_sp.p_phys_table; |
| } |
| |
| /** |
| * @brief qed_chain_advance_page - |
| * |
| * Advance the next element accros pages for a linked chain |
| * |
| * @param p_chain |
| * @param p_next_elem |
| * @param idx_to_inc |
| * @param page_to_inc |
| */ |
| static inline void |
| qed_chain_advance_page(struct qed_chain *p_chain, |
| void **p_next_elem, void *idx_to_inc, void *page_to_inc) |
| { |
| struct qed_chain_next *p_next = NULL; |
| u32 page_index = 0; |
| |
| switch (p_chain->mode) { |
| case QED_CHAIN_MODE_NEXT_PTR: |
| p_next = *p_next_elem; |
| *p_next_elem = p_next->next_virt; |
| if (is_chain_u16(p_chain)) |
| *(u16 *)idx_to_inc += p_chain->elem_unusable; |
| else |
| *(u32 *)idx_to_inc += p_chain->elem_unusable; |
| break; |
| case QED_CHAIN_MODE_SINGLE: |
| *p_next_elem = p_chain->p_virt_addr; |
| break; |
| |
| case QED_CHAIN_MODE_PBL: |
| if (is_chain_u16(p_chain)) { |
| if (++(*(u16 *)page_to_inc) == p_chain->page_cnt) |
| *(u16 *)page_to_inc = 0; |
| page_index = *(u16 *)page_to_inc; |
| } else { |
| if (++(*(u32 *)page_to_inc) == p_chain->page_cnt) |
| *(u32 *)page_to_inc = 0; |
| page_index = *(u32 *)page_to_inc; |
| } |
| *p_next_elem = p_chain->pbl.pp_addr_tbl[page_index].virt_addr; |
| } |
| } |
| |
| #define is_unusable_idx(p, idx) \ |
| (((p)->u.chain16.idx & (p)->elem_per_page_mask) == (p)->usable_per_page) |
| |
| #define is_unusable_idx_u32(p, idx) \ |
| (((p)->u.chain32.idx & (p)->elem_per_page_mask) == (p)->usable_per_page) |
| #define is_unusable_next_idx(p, idx) \ |
| ((((p)->u.chain16.idx + 1) & (p)->elem_per_page_mask) == \ |
| (p)->usable_per_page) |
| |
| #define is_unusable_next_idx_u32(p, idx) \ |
| ((((p)->u.chain32.idx + 1) & (p)->elem_per_page_mask) == \ |
| (p)->usable_per_page) |
| |
| #define test_and_skip(p, idx) \ |
| do { \ |
| if (is_chain_u16(p)) { \ |
| if (is_unusable_idx(p, idx)) \ |
| (p)->u.chain16.idx += (p)->elem_unusable; \ |
| } else { \ |
| if (is_unusable_idx_u32(p, idx)) \ |
| (p)->u.chain32.idx += (p)->elem_unusable; \ |
| } \ |
| } while (0) |
| |
| /** |
| * @brief qed_chain_return_produced - |
| * |
| * A chain in which the driver "Produces" elements should use this API |
| * to indicate previous produced elements are now consumed. |
| * |
| * @param p_chain |
| */ |
| static inline void qed_chain_return_produced(struct qed_chain *p_chain) |
| { |
| if (is_chain_u16(p_chain)) |
| p_chain->u.chain16.cons_idx++; |
| else |
| p_chain->u.chain32.cons_idx++; |
| test_and_skip(p_chain, cons_idx); |
| } |
| |
| /** |
| * @brief qed_chain_produce - |
| * |
| * A chain in which the driver "Produces" elements should use this to get |
| * a pointer to the next element which can be "Produced". It's driver |
| * responsibility to validate that the chain has room for new element. |
| * |
| * @param p_chain |
| * |
| * @return void*, a pointer to next element |
| */ |
| static inline void *qed_chain_produce(struct qed_chain *p_chain) |
| { |
| void *p_ret = NULL, *p_prod_idx, *p_prod_page_idx; |
| |
| if (is_chain_u16(p_chain)) { |
| if ((p_chain->u.chain16.prod_idx & |
| p_chain->elem_per_page_mask) == p_chain->next_page_mask) { |
| p_prod_idx = &p_chain->u.chain16.prod_idx; |
| p_prod_page_idx = &p_chain->pbl.c.u16.prod_page_idx; |
| qed_chain_advance_page(p_chain, &p_chain->p_prod_elem, |
| p_prod_idx, p_prod_page_idx); |
| } |
| p_chain->u.chain16.prod_idx++; |
| } else { |
| if ((p_chain->u.chain32.prod_idx & |
| p_chain->elem_per_page_mask) == p_chain->next_page_mask) { |
| p_prod_idx = &p_chain->u.chain32.prod_idx; |
| p_prod_page_idx = &p_chain->pbl.c.u32.prod_page_idx; |
| qed_chain_advance_page(p_chain, &p_chain->p_prod_elem, |
| p_prod_idx, p_prod_page_idx); |
| } |
| p_chain->u.chain32.prod_idx++; |
| } |
| |
| p_ret = p_chain->p_prod_elem; |
| p_chain->p_prod_elem = (void *)(((u8 *)p_chain->p_prod_elem) + |
| p_chain->elem_size); |
| |
| return p_ret; |
| } |
| |
| /** |
| * @brief qed_chain_get_capacity - |
| * |
| * Get the maximum number of BDs in chain |
| * |
| * @param p_chain |
| * @param num |
| * |
| * @return number of unusable BDs |
| */ |
| static inline u32 qed_chain_get_capacity(struct qed_chain *p_chain) |
| { |
| return p_chain->capacity; |
| } |
| |
| /** |
| * @brief qed_chain_recycle_consumed - |
| * |
| * Returns an element which was previously consumed; |
| * Increments producers so they could be written to FW. |
| * |
| * @param p_chain |
| */ |
| static inline void qed_chain_recycle_consumed(struct qed_chain *p_chain) |
| { |
| test_and_skip(p_chain, prod_idx); |
| if (is_chain_u16(p_chain)) |
| p_chain->u.chain16.prod_idx++; |
| else |
| p_chain->u.chain32.prod_idx++; |
| } |
| |
| /** |
| * @brief qed_chain_consume - |
| * |
| * A Chain in which the driver utilizes data written by a different source |
| * (i.e., FW) should use this to access passed buffers. |
| * |
| * @param p_chain |
| * |
| * @return void*, a pointer to the next buffer written |
| */ |
| static inline void *qed_chain_consume(struct qed_chain *p_chain) |
| { |
| void *p_ret = NULL, *p_cons_idx, *p_cons_page_idx; |
| |
| if (is_chain_u16(p_chain)) { |
| if ((p_chain->u.chain16.cons_idx & |
| p_chain->elem_per_page_mask) == p_chain->next_page_mask) { |
| p_cons_idx = &p_chain->u.chain16.cons_idx; |
| p_cons_page_idx = &p_chain->pbl.c.u16.cons_page_idx; |
| qed_chain_advance_page(p_chain, &p_chain->p_cons_elem, |
| p_cons_idx, p_cons_page_idx); |
| } |
| p_chain->u.chain16.cons_idx++; |
| } else { |
| if ((p_chain->u.chain32.cons_idx & |
| p_chain->elem_per_page_mask) == p_chain->next_page_mask) { |
| p_cons_idx = &p_chain->u.chain32.cons_idx; |
| p_cons_page_idx = &p_chain->pbl.c.u32.cons_page_idx; |
| qed_chain_advance_page(p_chain, &p_chain->p_cons_elem, |
| p_cons_idx, p_cons_page_idx); |
| } |
| p_chain->u.chain32.cons_idx++; |
| } |
| |
| p_ret = p_chain->p_cons_elem; |
| p_chain->p_cons_elem = (void *)(((u8 *)p_chain->p_cons_elem) + |
| p_chain->elem_size); |
| |
| return p_ret; |
| } |
| |
| /** |
| * @brief qed_chain_reset - Resets the chain to its start state |
| * |
| * @param p_chain pointer to a previously allocted chain |
| */ |
| static inline void qed_chain_reset(struct qed_chain *p_chain) |
| { |
| u32 i; |
| |
| if (is_chain_u16(p_chain)) { |
| p_chain->u.chain16.prod_idx = 0; |
| p_chain->u.chain16.cons_idx = 0; |
| } else { |
| p_chain->u.chain32.prod_idx = 0; |
| p_chain->u.chain32.cons_idx = 0; |
| } |
| p_chain->p_cons_elem = p_chain->p_virt_addr; |
| p_chain->p_prod_elem = p_chain->p_virt_addr; |
| |
| if (p_chain->mode == QED_CHAIN_MODE_PBL) { |
| /* Use (page_cnt - 1) as a reset value for the prod/cons page's |
| * indices, to avoid unnecessary page advancing on the first |
| * call to qed_chain_produce/consume. Instead, the indices |
| * will be advanced to page_cnt and then will be wrapped to 0. |
| */ |
| u32 reset_val = p_chain->page_cnt - 1; |
| |
| if (is_chain_u16(p_chain)) { |
| p_chain->pbl.c.u16.prod_page_idx = (u16)reset_val; |
| p_chain->pbl.c.u16.cons_page_idx = (u16)reset_val; |
| } else { |
| p_chain->pbl.c.u32.prod_page_idx = reset_val; |
| p_chain->pbl.c.u32.cons_page_idx = reset_val; |
| } |
| } |
| |
| switch (p_chain->intended_use) { |
| case QED_CHAIN_USE_TO_CONSUME: |
| /* produce empty elements */ |
| for (i = 0; i < p_chain->capacity; i++) |
| qed_chain_recycle_consumed(p_chain); |
| break; |
| |
| case QED_CHAIN_USE_TO_CONSUME_PRODUCE: |
| case QED_CHAIN_USE_TO_PRODUCE: |
| default: |
| /* Do nothing */ |
| break; |
| } |
| } |
| |
| /** |
| * @brief qed_chain_init - Initalizes a basic chain struct |
| * |
| * @param p_chain |
| * @param p_virt_addr |
| * @param p_phys_addr physical address of allocated buffer's beginning |
| * @param page_cnt number of pages in the allocated buffer |
| * @param elem_size size of each element in the chain |
| * @param intended_use |
| * @param mode |
| */ |
| static inline void qed_chain_init_params(struct qed_chain *p_chain, |
| u32 page_cnt, |
| u8 elem_size, |
| enum qed_chain_use_mode intended_use, |
| enum qed_chain_mode mode, |
| enum qed_chain_cnt_type cnt_type) |
| { |
| /* chain fixed parameters */ |
| p_chain->p_virt_addr = NULL; |
| p_chain->p_phys_addr = 0; |
| p_chain->elem_size = elem_size; |
| p_chain->intended_use = (u8)intended_use; |
| p_chain->mode = mode; |
| p_chain->cnt_type = (u8)cnt_type; |
| |
| p_chain->elem_per_page = ELEMS_PER_PAGE(elem_size); |
| p_chain->usable_per_page = USABLE_ELEMS_PER_PAGE(elem_size, mode); |
| p_chain->elem_per_page_mask = p_chain->elem_per_page - 1; |
| p_chain->elem_unusable = UNUSABLE_ELEMS_PER_PAGE(elem_size, mode); |
| p_chain->next_page_mask = (p_chain->usable_per_page & |
| p_chain->elem_per_page_mask); |
| |
| p_chain->page_cnt = page_cnt; |
| p_chain->capacity = p_chain->usable_per_page * page_cnt; |
| p_chain->size = p_chain->elem_per_page * page_cnt; |
| |
| p_chain->pbl_sp.p_phys_table = 0; |
| p_chain->pbl_sp.p_virt_table = NULL; |
| p_chain->pbl.pp_addr_tbl = NULL; |
| } |
| |
| /** |
| * @brief qed_chain_init_mem - |
| * |
| * Initalizes a basic chain struct with its chain buffers |
| * |
| * @param p_chain |
| * @param p_virt_addr virtual address of allocated buffer's beginning |
| * @param p_phys_addr physical address of allocated buffer's beginning |
| * |
| */ |
| static inline void qed_chain_init_mem(struct qed_chain *p_chain, |
| void *p_virt_addr, dma_addr_t p_phys_addr) |
| { |
| p_chain->p_virt_addr = p_virt_addr; |
| p_chain->p_phys_addr = p_phys_addr; |
| } |
| |
| /** |
| * @brief qed_chain_init_pbl_mem - |
| * |
| * Initalizes a basic chain struct with its pbl buffers |
| * |
| * @param p_chain |
| * @param p_virt_pbl pointer to a pre allocated side table which will hold |
| * virtual page addresses. |
| * @param p_phys_pbl pointer to a pre-allocated side table which will hold |
| * physical page addresses. |
| * @param pp_virt_addr_tbl |
| * pointer to a pre-allocated side table which will hold |
| * the virtual addresses of the chain pages. |
| * |
| */ |
| static inline void qed_chain_init_pbl_mem(struct qed_chain *p_chain, |
| void *p_virt_pbl, |
| dma_addr_t p_phys_pbl, |
| struct addr_tbl_entry *pp_addr_tbl) |
| { |
| p_chain->pbl_sp.p_phys_table = p_phys_pbl; |
| p_chain->pbl_sp.p_virt_table = p_virt_pbl; |
| p_chain->pbl.pp_addr_tbl = pp_addr_tbl; |
| } |
| |
| /** |
| * @brief qed_chain_init_next_ptr_elem - |
| * |
| * Initalizes a next pointer element |
| * |
| * @param p_chain |
| * @param p_virt_curr virtual address of a chain page of which the next |
| * pointer element is initialized |
| * @param p_virt_next virtual address of the next chain page |
| * @param p_phys_next physical address of the next chain page |
| * |
| */ |
| static inline void |
| qed_chain_init_next_ptr_elem(struct qed_chain *p_chain, |
| void *p_virt_curr, |
| void *p_virt_next, dma_addr_t p_phys_next) |
| { |
| struct qed_chain_next *p_next; |
| u32 size; |
| |
| size = p_chain->elem_size * p_chain->usable_per_page; |
| p_next = (struct qed_chain_next *)((u8 *)p_virt_curr + size); |
| |
| DMA_REGPAIR_LE(p_next->next_phys, p_phys_next); |
| |
| p_next->next_virt = p_virt_next; |
| } |
| |
| /** |
| * @brief qed_chain_get_last_elem - |
| * |
| * Returns a pointer to the last element of the chain |
| * |
| * @param p_chain |
| * |
| * @return void* |
| */ |
| static inline void *qed_chain_get_last_elem(struct qed_chain *p_chain) |
| { |
| struct qed_chain_next *p_next = NULL; |
| void *p_virt_addr = NULL; |
| u32 size, last_page_idx; |
| |
| if (!p_chain->p_virt_addr) |
| goto out; |
| |
| switch (p_chain->mode) { |
| case QED_CHAIN_MODE_NEXT_PTR: |
| size = p_chain->elem_size * p_chain->usable_per_page; |
| p_virt_addr = p_chain->p_virt_addr; |
| p_next = (struct qed_chain_next *)((u8 *)p_virt_addr + size); |
| while (p_next->next_virt != p_chain->p_virt_addr) { |
| p_virt_addr = p_next->next_virt; |
| p_next = (struct qed_chain_next *)((u8 *)p_virt_addr + |
| size); |
| } |
| break; |
| case QED_CHAIN_MODE_SINGLE: |
| p_virt_addr = p_chain->p_virt_addr; |
| break; |
| case QED_CHAIN_MODE_PBL: |
| last_page_idx = p_chain->page_cnt - 1; |
| p_virt_addr = p_chain->pbl.pp_addr_tbl[last_page_idx].virt_addr; |
| break; |
| } |
| /* p_virt_addr points at this stage to the last page of the chain */ |
| size = p_chain->elem_size * (p_chain->usable_per_page - 1); |
| p_virt_addr = (u8 *)p_virt_addr + size; |
| out: |
| return p_virt_addr; |
| } |
| |
| /** |
| * @brief qed_chain_set_prod - sets the prod to the given value |
| * |
| * @param prod_idx |
| * @param p_prod_elem |
| */ |
| static inline void qed_chain_set_prod(struct qed_chain *p_chain, |
| u32 prod_idx, void *p_prod_elem) |
| { |
| if (p_chain->mode == QED_CHAIN_MODE_PBL) { |
| u32 cur_prod, page_mask, page_cnt, page_diff; |
| |
| cur_prod = is_chain_u16(p_chain) ? p_chain->u.chain16.prod_idx : |
| p_chain->u.chain32.prod_idx; |
| |
| /* Assume that number of elements in a page is power of 2 */ |
| page_mask = ~p_chain->elem_per_page_mask; |
| |
| /* Use "cur_prod - 1" and "prod_idx - 1" since producer index |
| * reaches the first element of next page before the page index |
| * is incremented. See qed_chain_produce(). |
| * Index wrap around is not a problem because the difference |
| * between current and given producer indices is always |
| * positive and lower than the chain's capacity. |
| */ |
| page_diff = (((cur_prod - 1) & page_mask) - |
| ((prod_idx - 1) & page_mask)) / |
| p_chain->elem_per_page; |
| |
| page_cnt = qed_chain_get_page_cnt(p_chain); |
| if (is_chain_u16(p_chain)) |
| p_chain->pbl.c.u16.prod_page_idx = |
| (p_chain->pbl.c.u16.prod_page_idx - |
| page_diff + page_cnt) % page_cnt; |
| else |
| p_chain->pbl.c.u32.prod_page_idx = |
| (p_chain->pbl.c.u32.prod_page_idx - |
| page_diff + page_cnt) % page_cnt; |
| } |
| |
| if (is_chain_u16(p_chain)) |
| p_chain->u.chain16.prod_idx = (u16) prod_idx; |
| else |
| p_chain->u.chain32.prod_idx = prod_idx; |
| p_chain->p_prod_elem = p_prod_elem; |
| } |
| |
| /** |
| * @brief qed_chain_pbl_zero_mem - set chain memory to 0 |
| * |
| * @param p_chain |
| */ |
| static inline void qed_chain_pbl_zero_mem(struct qed_chain *p_chain) |
| { |
| u32 i, page_cnt; |
| |
| if (p_chain->mode != QED_CHAIN_MODE_PBL) |
| return; |
| |
| page_cnt = qed_chain_get_page_cnt(p_chain); |
| |
| for (i = 0; i < page_cnt; i++) |
| memset(p_chain->pbl.pp_addr_tbl[i].virt_addr, 0, |
| QED_CHAIN_PAGE_SIZE); |
| } |
| |
| #endif |