| /* |
| * Workingset detection |
| * |
| * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner |
| */ |
| |
| #include <linux/memcontrol.h> |
| #include <linux/writeback.h> |
| #include <linux/pagemap.h> |
| #include <linux/atomic.h> |
| #include <linux/module.h> |
| #include <linux/swap.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| |
| /* |
| * Double CLOCK lists |
| * |
| * Per node, two clock lists are maintained for file pages: the |
| * inactive and the active list. Freshly faulted pages start out at |
| * the head of the inactive list and page reclaim scans pages from the |
| * tail. Pages that are accessed multiple times on the inactive list |
| * are promoted to the active list, to protect them from reclaim, |
| * whereas active pages are demoted to the inactive list when the |
| * active list grows too big. |
| * |
| * fault ------------------------+ |
| * | |
| * +--------------+ | +-------------+ |
| * reclaim <- | inactive | <-+-- demotion | active | <--+ |
| * +--------------+ +-------------+ | |
| * | | |
| * +-------------- promotion ------------------+ |
| * |
| * |
| * Access frequency and refault distance |
| * |
| * A workload is thrashing when its pages are frequently used but they |
| * are evicted from the inactive list every time before another access |
| * would have promoted them to the active list. |
| * |
| * In cases where the average access distance between thrashing pages |
| * is bigger than the size of memory there is nothing that can be |
| * done - the thrashing set could never fit into memory under any |
| * circumstance. |
| * |
| * However, the average access distance could be bigger than the |
| * inactive list, yet smaller than the size of memory. In this case, |
| * the set could fit into memory if it weren't for the currently |
| * active pages - which may be used more, hopefully less frequently: |
| * |
| * +-memory available to cache-+ |
| * | | |
| * +-inactive------+-active----+ |
| * a b | c d e f g h i | J K L M N | |
| * +---------------+-----------+ |
| * |
| * It is prohibitively expensive to accurately track access frequency |
| * of pages. But a reasonable approximation can be made to measure |
| * thrashing on the inactive list, after which refaulting pages can be |
| * activated optimistically to compete with the existing active pages. |
| * |
| * Approximating inactive page access frequency - Observations: |
| * |
| * 1. When a page is accessed for the first time, it is added to the |
| * head of the inactive list, slides every existing inactive page |
| * towards the tail by one slot, and pushes the current tail page |
| * out of memory. |
| * |
| * 2. When a page is accessed for the second time, it is promoted to |
| * the active list, shrinking the inactive list by one slot. This |
| * also slides all inactive pages that were faulted into the cache |
| * more recently than the activated page towards the tail of the |
| * inactive list. |
| * |
| * Thus: |
| * |
| * 1. The sum of evictions and activations between any two points in |
| * time indicate the minimum number of inactive pages accessed in |
| * between. |
| * |
| * 2. Moving one inactive page N page slots towards the tail of the |
| * list requires at least N inactive page accesses. |
| * |
| * Combining these: |
| * |
| * 1. When a page is finally evicted from memory, the number of |
| * inactive pages accessed while the page was in cache is at least |
| * the number of page slots on the inactive list. |
| * |
| * 2. In addition, measuring the sum of evictions and activations (E) |
| * at the time of a page's eviction, and comparing it to another |
| * reading (R) at the time the page faults back into memory tells |
| * the minimum number of accesses while the page was not cached. |
| * This is called the refault distance. |
| * |
| * Because the first access of the page was the fault and the second |
| * access the refault, we combine the in-cache distance with the |
| * out-of-cache distance to get the complete minimum access distance |
| * of this page: |
| * |
| * NR_inactive + (R - E) |
| * |
| * And knowing the minimum access distance of a page, we can easily |
| * tell if the page would be able to stay in cache assuming all page |
| * slots in the cache were available: |
| * |
| * NR_inactive + (R - E) <= NR_inactive + NR_active |
| * |
| * which can be further simplified to |
| * |
| * (R - E) <= NR_active |
| * |
| * Put into words, the refault distance (out-of-cache) can be seen as |
| * a deficit in inactive list space (in-cache). If the inactive list |
| * had (R - E) more page slots, the page would not have been evicted |
| * in between accesses, but activated instead. And on a full system, |
| * the only thing eating into inactive list space is active pages. |
| * |
| * |
| * Activating refaulting pages |
| * |
| * All that is known about the active list is that the pages have been |
| * accessed more than once in the past. This means that at any given |
| * time there is actually a good chance that pages on the active list |
| * are no longer in active use. |
| * |
| * So when a refault distance of (R - E) is observed and there are at |
| * least (R - E) active pages, the refaulting page is activated |
| * optimistically in the hope that (R - E) active pages are actually |
| * used less frequently than the refaulting page - or even not used at |
| * all anymore. |
| * |
| * If this is wrong and demotion kicks in, the pages which are truly |
| * used more frequently will be reactivated while the less frequently |
| * used once will be evicted from memory. |
| * |
| * But if this is right, the stale pages will be pushed out of memory |
| * and the used pages get to stay in cache. |
| * |
| * |
| * Implementation |
| * |
| * For each node's file LRU lists, a counter for inactive evictions |
| * and activations is maintained (node->inactive_age). |
| * |
| * On eviction, a snapshot of this counter (along with some bits to |
| * identify the node) is stored in the now empty page cache radix tree |
| * slot of the evicted page. This is called a shadow entry. |
| * |
| * On cache misses for which there are shadow entries, an eligible |
| * refault distance will immediately activate the refaulting page. |
| */ |
| |
| #define EVICTION_SHIFT (RADIX_TREE_EXCEPTIONAL_ENTRY + \ |
| NODES_SHIFT + \ |
| MEM_CGROUP_ID_SHIFT) |
| #define EVICTION_MASK (~0UL >> EVICTION_SHIFT) |
| |
| /* |
| * Eviction timestamps need to be able to cover the full range of |
| * actionable refaults. However, bits are tight in the radix tree |
| * entry, and after storing the identifier for the lruvec there might |
| * not be enough left to represent every single actionable refault. In |
| * that case, we have to sacrifice granularity for distance, and group |
| * evictions into coarser buckets by shaving off lower timestamp bits. |
| */ |
| static unsigned int bucket_order __read_mostly; |
| |
| static void *pack_shadow(int memcgid, pg_data_t *pgdat, unsigned long eviction) |
| { |
| eviction >>= bucket_order; |
| eviction = (eviction << MEM_CGROUP_ID_SHIFT) | memcgid; |
| eviction = (eviction << NODES_SHIFT) | pgdat->node_id; |
| eviction = (eviction << RADIX_TREE_EXCEPTIONAL_SHIFT); |
| |
| return (void *)(eviction | RADIX_TREE_EXCEPTIONAL_ENTRY); |
| } |
| |
| static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat, |
| unsigned long *evictionp) |
| { |
| unsigned long entry = (unsigned long)shadow; |
| int memcgid, nid; |
| |
| entry >>= RADIX_TREE_EXCEPTIONAL_SHIFT; |
| nid = entry & ((1UL << NODES_SHIFT) - 1); |
| entry >>= NODES_SHIFT; |
| memcgid = entry & ((1UL << MEM_CGROUP_ID_SHIFT) - 1); |
| entry >>= MEM_CGROUP_ID_SHIFT; |
| |
| *memcgidp = memcgid; |
| *pgdat = NODE_DATA(nid); |
| *evictionp = entry << bucket_order; |
| } |
| |
| /** |
| * workingset_eviction - note the eviction of a page from memory |
| * @mapping: address space the page was backing |
| * @page: the page being evicted |
| * |
| * Returns a shadow entry to be stored in @mapping->page_tree in place |
| * of the evicted @page so that a later refault can be detected. |
| */ |
| void *workingset_eviction(struct address_space *mapping, struct page *page) |
| { |
| struct mem_cgroup *memcg = page_memcg(page); |
| struct pglist_data *pgdat = page_pgdat(page); |
| int memcgid = mem_cgroup_id(memcg); |
| unsigned long eviction; |
| struct lruvec *lruvec; |
| |
| /* Page is fully exclusive and pins page->mem_cgroup */ |
| VM_BUG_ON_PAGE(PageLRU(page), page); |
| VM_BUG_ON_PAGE(page_count(page), page); |
| VM_BUG_ON_PAGE(!PageLocked(page), page); |
| |
| lruvec = mem_cgroup_lruvec(pgdat, memcg); |
| eviction = atomic_long_inc_return(&lruvec->inactive_age); |
| return pack_shadow(memcgid, pgdat, eviction); |
| } |
| |
| /** |
| * workingset_refault - evaluate the refault of a previously evicted page |
| * @shadow: shadow entry of the evicted page |
| * |
| * Calculates and evaluates the refault distance of the previously |
| * evicted page in the context of the node it was allocated in. |
| * |
| * Returns %true if the page should be activated, %false otherwise. |
| */ |
| bool workingset_refault(void *shadow) |
| { |
| unsigned long refault_distance; |
| unsigned long active_file; |
| struct mem_cgroup *memcg; |
| unsigned long eviction; |
| struct lruvec *lruvec; |
| unsigned long refault; |
| struct pglist_data *pgdat; |
| int memcgid; |
| |
| unpack_shadow(shadow, &memcgid, &pgdat, &eviction); |
| |
| rcu_read_lock(); |
| /* |
| * Look up the memcg associated with the stored ID. It might |
| * have been deleted since the page's eviction. |
| * |
| * Note that in rare events the ID could have been recycled |
| * for a new cgroup that refaults a shared page. This is |
| * impossible to tell from the available data. However, this |
| * should be a rare and limited disturbance, and activations |
| * are always speculative anyway. Ultimately, it's the aging |
| * algorithm's job to shake out the minimum access frequency |
| * for the active cache. |
| * |
| * XXX: On !CONFIG_MEMCG, this will always return NULL; it |
| * would be better if the root_mem_cgroup existed in all |
| * configurations instead. |
| */ |
| memcg = mem_cgroup_from_id(memcgid); |
| if (!mem_cgroup_disabled() && !memcg) { |
| rcu_read_unlock(); |
| return false; |
| } |
| lruvec = mem_cgroup_lruvec(pgdat, memcg); |
| refault = atomic_long_read(&lruvec->inactive_age); |
| active_file = lruvec_lru_size(lruvec, LRU_ACTIVE_FILE); |
| rcu_read_unlock(); |
| |
| /* |
| * The unsigned subtraction here gives an accurate distance |
| * across inactive_age overflows in most cases. |
| * |
| * There is a special case: usually, shadow entries have a |
| * short lifetime and are either refaulted or reclaimed along |
| * with the inode before they get too old. But it is not |
| * impossible for the inactive_age to lap a shadow entry in |
| * the field, which can then can result in a false small |
| * refault distance, leading to a false activation should this |
| * old entry actually refault again. However, earlier kernels |
| * used to deactivate unconditionally with *every* reclaim |
| * invocation for the longest time, so the occasional |
| * inappropriate activation leading to pressure on the active |
| * list is not a problem. |
| */ |
| refault_distance = (refault - eviction) & EVICTION_MASK; |
| |
| inc_node_state(pgdat, WORKINGSET_REFAULT); |
| |
| if (refault_distance <= active_file) { |
| inc_node_state(pgdat, WORKINGSET_ACTIVATE); |
| return true; |
| } |
| return false; |
| } |
| |
| /** |
| * workingset_activation - note a page activation |
| * @page: page that is being activated |
| */ |
| void workingset_activation(struct page *page) |
| { |
| struct mem_cgroup *memcg; |
| struct lruvec *lruvec; |
| |
| rcu_read_lock(); |
| /* |
| * Filter non-memcg pages here, e.g. unmap can call |
| * mark_page_accessed() on VDSO pages. |
| * |
| * XXX: See workingset_refault() - this should return |
| * root_mem_cgroup even for !CONFIG_MEMCG. |
| */ |
| memcg = page_memcg_rcu(page); |
| if (!mem_cgroup_disabled() && !memcg) |
| goto out; |
| lruvec = mem_cgroup_lruvec(page_pgdat(page), memcg); |
| atomic_long_inc(&lruvec->inactive_age); |
| out: |
| rcu_read_unlock(); |
| } |
| |
| /* |
| * Shadow entries reflect the share of the working set that does not |
| * fit into memory, so their number depends on the access pattern of |
| * the workload. In most cases, they will refault or get reclaimed |
| * along with the inode, but a (malicious) workload that streams |
| * through files with a total size several times that of available |
| * memory, while preventing the inodes from being reclaimed, can |
| * create excessive amounts of shadow nodes. To keep a lid on this, |
| * track shadow nodes and reclaim them when they grow way past the |
| * point where they would still be useful. |
| */ |
| |
| struct list_lru workingset_shadow_nodes; |
| |
| static unsigned long count_shadow_nodes(struct shrinker *shrinker, |
| struct shrink_control *sc) |
| { |
| unsigned long shadow_nodes; |
| unsigned long max_nodes; |
| unsigned long pages; |
| |
| /* list_lru lock nests inside IRQ-safe mapping->tree_lock */ |
| local_irq_disable(); |
| shadow_nodes = list_lru_shrink_count(&workingset_shadow_nodes, sc); |
| local_irq_enable(); |
| |
| if (sc->memcg) { |
| pages = mem_cgroup_node_nr_lru_pages(sc->memcg, sc->nid, |
| LRU_ALL_FILE); |
| } else { |
| pages = node_page_state(NODE_DATA(sc->nid), NR_ACTIVE_FILE) + |
| node_page_state(NODE_DATA(sc->nid), NR_INACTIVE_FILE); |
| } |
| |
| /* |
| * Active cache pages are limited to 50% of memory, and shadow |
| * entries that represent a refault distance bigger than that |
| * do not have any effect. Limit the number of shadow nodes |
| * such that shadow entries do not exceed the number of active |
| * cache pages, assuming a worst-case node population density |
| * of 1/8th on average. |
| * |
| * On 64-bit with 7 radix_tree_nodes per page and 64 slots |
| * each, this will reclaim shadow entries when they consume |
| * ~2% of available memory: |
| * |
| * PAGE_SIZE / radix_tree_nodes / node_entries / PAGE_SIZE |
| */ |
| max_nodes = pages >> (1 + RADIX_TREE_MAP_SHIFT - 3); |
| |
| if (shadow_nodes <= max_nodes) |
| return 0; |
| |
| return shadow_nodes - max_nodes; |
| } |
| |
| static enum lru_status shadow_lru_isolate(struct list_head *item, |
| struct list_lru_one *lru, |
| spinlock_t *lru_lock, |
| void *arg) |
| { |
| struct address_space *mapping; |
| struct radix_tree_node *node; |
| unsigned int i; |
| int ret; |
| |
| /* |
| * Page cache insertions and deletions synchroneously maintain |
| * the shadow node LRU under the mapping->tree_lock and the |
| * lru_lock. Because the page cache tree is emptied before |
| * the inode can be destroyed, holding the lru_lock pins any |
| * address_space that has radix tree nodes on the LRU. |
| * |
| * We can then safely transition to the mapping->tree_lock to |
| * pin only the address_space of the particular node we want |
| * to reclaim, take the node off-LRU, and drop the lru_lock. |
| */ |
| |
| node = container_of(item, struct radix_tree_node, private_list); |
| mapping = node->private_data; |
| |
| /* Coming from the list, invert the lock order */ |
| if (!spin_trylock(&mapping->tree_lock)) { |
| spin_unlock(lru_lock); |
| ret = LRU_RETRY; |
| goto out; |
| } |
| |
| list_lru_isolate(lru, item); |
| spin_unlock(lru_lock); |
| |
| /* |
| * The nodes should only contain one or more shadow entries, |
| * no pages, so we expect to be able to remove them all and |
| * delete and free the empty node afterwards. |
| */ |
| if (WARN_ON_ONCE(!workingset_node_shadows(node))) |
| goto out_invalid; |
| if (WARN_ON_ONCE(workingset_node_pages(node))) |
| goto out_invalid; |
| for (i = 0; i < RADIX_TREE_MAP_SIZE; i++) { |
| if (node->slots[i]) { |
| if (WARN_ON_ONCE(!radix_tree_exceptional_entry(node->slots[i]))) |
| goto out_invalid; |
| if (WARN_ON_ONCE(!mapping->nrexceptional)) |
| goto out_invalid; |
| node->slots[i] = NULL; |
| workingset_node_shadows_dec(node); |
| mapping->nrexceptional--; |
| } |
| } |
| if (WARN_ON_ONCE(workingset_node_shadows(node))) |
| goto out_invalid; |
| inc_node_state(page_pgdat(virt_to_page(node)), WORKINGSET_NODERECLAIM); |
| __radix_tree_delete_node(&mapping->page_tree, node); |
| |
| out_invalid: |
| spin_unlock(&mapping->tree_lock); |
| ret = LRU_REMOVED_RETRY; |
| out: |
| local_irq_enable(); |
| cond_resched(); |
| local_irq_disable(); |
| spin_lock(lru_lock); |
| return ret; |
| } |
| |
| static unsigned long scan_shadow_nodes(struct shrinker *shrinker, |
| struct shrink_control *sc) |
| { |
| unsigned long ret; |
| |
| /* list_lru lock nests inside IRQ-safe mapping->tree_lock */ |
| local_irq_disable(); |
| ret = list_lru_shrink_walk(&workingset_shadow_nodes, sc, |
| shadow_lru_isolate, NULL); |
| local_irq_enable(); |
| return ret; |
| } |
| |
| static struct shrinker workingset_shadow_shrinker = { |
| .count_objects = count_shadow_nodes, |
| .scan_objects = scan_shadow_nodes, |
| .seeks = DEFAULT_SEEKS, |
| .flags = SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, |
| }; |
| |
| /* |
| * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe |
| * mapping->tree_lock. |
| */ |
| static struct lock_class_key shadow_nodes_key; |
| |
| static int __init workingset_init(void) |
| { |
| unsigned int timestamp_bits; |
| unsigned int max_order; |
| int ret; |
| |
| BUILD_BUG_ON(BITS_PER_LONG < EVICTION_SHIFT); |
| /* |
| * Calculate the eviction bucket size to cover the longest |
| * actionable refault distance, which is currently half of |
| * memory (totalram_pages/2). However, memory hotplug may add |
| * some more pages at runtime, so keep working with up to |
| * double the initial memory by using totalram_pages as-is. |
| */ |
| timestamp_bits = BITS_PER_LONG - EVICTION_SHIFT; |
| max_order = fls_long(totalram_pages - 1); |
| if (max_order > timestamp_bits) |
| bucket_order = max_order - timestamp_bits; |
| pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n", |
| timestamp_bits, max_order, bucket_order); |
| |
| ret = list_lru_init_key(&workingset_shadow_nodes, &shadow_nodes_key); |
| if (ret) |
| goto err; |
| ret = register_shrinker(&workingset_shadow_shrinker); |
| if (ret) |
| goto err_list_lru; |
| return 0; |
| err_list_lru: |
| list_lru_destroy(&workingset_shadow_nodes); |
| err: |
| return ret; |
| } |
| module_init(workingset_init); |