| /* |
| * Copyright (c) 2000-2006 LSI Logic Corporation. |
| * |
| * |
| * Name: mpi_cnfg.h |
| * Title: MPI Config message, structures, and Pages |
| * Creation Date: July 27, 2000 |
| * |
| * mpi_cnfg.h Version: 01.05.13 |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. |
| * 06-06-00 01.00.01 Update version number for 1.0 release. |
| * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. |
| * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 |
| * fields to FC_DEVICE_0 page, updated the page version. |
| * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in |
| * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages |
| * and updated the page versions. |
| * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 |
| * page and updated the page version. |
| * Added Information field and _INFO_PARAMS_NEGOTIATED |
| * definitionto SCSI_DEVICE_0 page. |
| * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the |
| * page version. |
| * Added BucketsRemaining to LAN_1 page, redefined the |
| * state values, and updated the page version. |
| * Revised bus width definitions in SCSI_PORT_0, |
| * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. |
| * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page |
| * version. |
| * Moved FC_DEVICE_0 PageAddress description to spec. |
| * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field |
| * widths in IOC_0 page and updated the page version. |
| * 11-02-00 01.01.01 Original release for post 1.0 work |
| * Added Manufacturing pages, IO Unit Page 2, SCSI SPI |
| * Port Page 2, FC Port Page 4, FC Port Page 5 |
| * 11-15-00 01.01.02 Interim changes to match proposals |
| * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. |
| * 12-05-00 01.01.04 Modified config page actions. |
| * 01-09-01 01.01.05 Added defines for page address formats. |
| * Data size for Manufacturing pages 2 and 3 no longer |
| * defined here. |
| * Io Unit Page 2 size is fixed at 4 adapters and some |
| * flags were changed. |
| * SCSI Port Page 2 Device Settings modified. |
| * New fields added to FC Port Page 0 and some flags |
| * cleaned up. |
| * Removed impedance flash from FC Port Page 1. |
| * Added FC Port pages 6 and 7. |
| * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. |
| * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. |
| * Added some LinkType defines for FcPortPage0. |
| * 02-20-01 01.01.08 Started using MPI_POINTER. |
| * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with |
| * MPI_CONFIG_PAGETYPE_RAID_VOLUME. |
| * Added definitions and structures for IOC Page 2 and |
| * RAID Volume Page 2. |
| * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. |
| * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. |
| * Added VendorId and ProductRevLevel fields to |
| * RAIDVOL2_IM_PHYS_ID struct. |
| * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ |
| * defines to make them compatible to MPI version 1.0. |
| * Added structure offset comments. |
| * 04-09-01 01.01.11 Added some new defines for the PageAddress field and |
| * removed some obsolete ones. |
| * Added IO Unit Page 3. |
| * Modified defines for Scsi Port Page 2. |
| * Modified RAID Volume Pages. |
| * 08-08-01 01.02.01 Original release for v1.2 work. |
| * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. |
| * Added defines for the SEP bits in RVP2 VolumeSettings. |
| * Modified the DeviceSettings field in RVP2 to use the |
| * proper structure. |
| * Added defines for SES, SAF-TE, and cross channel for |
| * IOCPage2 CapabilitiesFlags. |
| * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. |
| * Removed define for |
| * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. |
| * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. |
| * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. |
| * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY |
| * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. |
| * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, |
| * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and |
| * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and |
| * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. |
| * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED |
| * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. |
| * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. |
| * Added rejected bits to SCSI Device Page 0 Information. |
| * Increased size of ALPA array in FC Port Page 2 by one |
| * and removed a one byte reserved field. |
| * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in |
| * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. |
| * Added structures for Manufacturing Page 4, IO Unit |
| * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and |
| * RAID PhysDisk Page 0. |
| * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. |
| * Modified some of the new defines to make them 32 |
| * character unique. |
| * Modified how variable length pages (arrays) are defined. |
| * Added generic defines for hot spare pools and RAID |
| * volume types. |
| * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. |
| * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with |
| * related define, and bumped the page version define. |
| * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a |
| * reserved byte and added a define. |
| * Added define for |
| * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. |
| * Added new config page: CONFIG_PAGE_IOC_5. |
| * Added MaxAliases, MaxHardAliases, and NumCurrentAliases |
| * fields to CONFIG_PAGE_FC_PORT_0. |
| * Added AltConnector and NumRequestedAliases fields to |
| * CONFIG_PAGE_FC_PORT_1. |
| * Added new config page: CONFIG_PAGE_FC_PORT_10. |
| * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. |
| * Added additional MPI_SCSIDEVPAGE0_NP_ defines. |
| * Added more MPI_SCSIDEVPAGE1_RP_ defines. |
| * Added define for |
| * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. |
| * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. |
| * Modified MPI_FCPORTPAGE5_FLAGS_ defines. |
| * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. |
| * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. |
| * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. |
| * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. |
| * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for |
| * CONFIG_PAGE_FC_PORT_1. |
| * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable |
| * an alias. |
| * Added more device id defines. |
| * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. |
| * Added TargetConfig and IDConfig fields to |
| * CONFIG_PAGE_SCSI_PORT_1. |
| * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 |
| * to control DV. |
| * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. |
| * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field |
| * with ADISCHardALPA. |
| * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. |
| * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout |
| * fields and related defines to CONFIG_PAGE_FC_PORT_1. |
| * Added define for |
| * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. |
| * Added new fields to the substructures of |
| * CONFIG_PAGE_FC_PORT_10. |
| * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, |
| * CONFIG_PAGE_SCSI_DEVICE_0, and |
| * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for |
| * these pages. |
| * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. |
| * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config |
| * pages. |
| * Added a new structure for extended config page header. |
| * Added new extended config pages types and structures for |
| * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. |
| * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 |
| * to add a Flags field. |
| * Two new Manufacturing config pages (5 and 6). |
| * Two new bits defined for IO Unit Page 1 Flags field. |
| * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields |
| * to specify the BIOS boot device. |
| * Four new Flags bits defined for IO Unit Page 2. |
| * Added IO Unit Page 4. |
| * Added EEDP Flags settings to IOC Page 1. |
| * Added new BIOS Page 1 config page. |
| * 10-05-04 01.05.02 Added define for |
| * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. |
| * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and |
| * associated defines. |
| * Added more defines for SAS IO Unit Page 0 |
| * DiscoveryStatus field. |
| * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK |
| * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. |
| * Added defines for Physical Mapping Modes to SAS IO Unit |
| * Page 2. |
| * Added define for |
| * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. |
| * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. |
| * Added defines for MaxTargetSpinUp to BIOS Page 1. |
| * Added 5 new ControlFlags defines for SAS IO Unit |
| * Page 1. |
| * Added MaxNumPhysicalMappedIDs field to SAS IO Unit |
| * Page 2. |
| * Added AccessStatus field to SAS Device Page 0 and added |
| * new Flags bits for supported SATA features. |
| * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID |
| * Volume Page 1, and RAID Physical Disk Page 1. |
| * Replaced IO Unit Page 1 BootTargetID,BootBus, and |
| * BootAdapterNum with reserved field. |
| * Added DataScrubRate and ResyncRate to RAID Volume |
| * Page 0. |
| * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT |
| * define. |
| * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 |
| * Flags field. |
| * Added Auto Port Config flag define for SAS IOUNIT |
| * Page 1 ControlFlags. |
| * Added Disabled bad Phy define to Expander Page 1 |
| * Discovery Info field. |
| * Added SAS/SATA device support to SAS IOUnit Page 1 |
| * ControlFlags. |
| * Added Unsupported device to SAS Dev Page 0 Flags field |
| * Added disable use SATA Hash Address for SAS IOUNIT |
| * page 1 in ControlFields. |
| * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to |
| * Manufacturing Page 4. |
| * Added new defines for BIOS Page 1 IOCSettings field. |
| * Added ExtDiskIdentifier field to RAID Physical Disk |
| * Page 0. |
| * Added new defines for SAS IO Unit Page 1 ControlFlags |
| * and to SAS Device Page 0 Flags to control SATA devices. |
| * Added defines and structures for the new Log Page 0, a |
| * new type of configuration page. |
| * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. |
| * Added WWID field to RAID Volume Page 1. |
| * Added PhysicalPort field to SAS Expander pages 0 and 1. |
| * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. |
| * Added Enclosure/Slot boot device format to BIOS Page 2. |
| * New status value for RAID Volume Page 0 VolumeStatus |
| * (VolumeState subfield). |
| * New value for RAID Physical Page 0 InactiveStatus. |
| * Added Inactive Volume Member flag RAID Physical Disk |
| * Page 0 PhysDiskStatus field. |
| * New physical mapping mode in SAS IO Unit Page 2. |
| * Added CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * Added Slot and Enclosure fields to SAS Device Page 0. |
| * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. |
| * Added more RAID type defines to IOC Page 2. |
| * Added Port Enable Delay settings to BIOS Page 1. |
| * Added Bad Block Table Full define to RAID Volume Page 0. |
| * Added Previous State defines to RAID Physical Disk |
| * Page 0. |
| * Added Max Sata Targets define for DiscoveryStatus field |
| * of SAS IO Unit Page 0. |
| * Added Device Self Test to Control Flags of SAS IO Unit |
| * Page 1. |
| * Added Direct Attach Starting Slot Number define for SAS |
| * IO Unit Page 2. |
| * Added new fields in SAS Device Page 2 for enclosure |
| * mapping. |
| * Added OwnerDevHandle and Flags field to SAS PHY Page 0. |
| * Added IOC GPIO Flags define to SAS Enclosure Page 0. |
| * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. |
| * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from |
| * Manufacturing Page 4. |
| * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. |
| * Added NumDevsPerEnclosure field to SAS IO Unit page 2. |
| * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP |
| * define. |
| * Added EnclosureHandle field to SAS Expander page 0. |
| * Removed redundant NumTableEntriesProg field from SAS |
| * Expander Page 1. |
| * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for |
| * SAS1078. |
| * Added more defines for Manufacturing Page 4 Flags field. |
| * Added more defines for IOCSettings and added |
| * ExpanderSpinup field to Bios Page 1. |
| * Added postpone SATA Init bit to SAS IO Unit Page 1 |
| * ControlFlags. |
| * Changed LogEntry format for Log Page 0. |
| * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. |
| * Added Manufacturing Page 7. |
| * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. |
| * Added IOC Page 6. |
| * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. |
| * Added MaxLBAHigh field to RAID Volume Page 0. |
| * Added Nvdata version fields to SAS IO Unit Page 0. |
| * Added AdditionalControlFlags, MaxTargetPortConnectTime, |
| * ReportDeviceMissingDelay, and IODeviceMissingDelay |
| * fields to SAS IO Unit Page 1. |
| * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to |
| * Manufacturing Page 5. |
| * Added Manufacturing pages 8 through 10. |
| * Added defines for supported metadata size bits in |
| * CapabilitiesFlags field of IOC Page 6. |
| * Added defines for metadata size bits in VolumeSettings |
| * field of RAID Volume Page 0. |
| * Added SATA Link Reset settings, Enable SATA Asynchronous |
| * Notification bit, and HideNonZeroAttachedPhyIdentifiers |
| * bit to AdditionalControlFlags field of SAS IO Unit |
| * Page 1. |
| * Added defines for Enclosure Devices Unmapped and |
| * Device Limit Exceeded bits in Status field of SAS IO |
| * Unit Page 2. |
| * Added more AccessStatus values for SAS Device Page 0. |
| * Added bit for SATA Asynchronous Notification Support in |
| * Flags field of SAS Device Page 0. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI_CNFG_H |
| #define MPI_CNFG_H |
| |
| |
| /***************************************************************************** |
| * |
| * C o n f i g M e s s a g e a n d S t r u c t u r e s |
| * |
| *****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_HEADER |
| { |
| U8 PageVersion; /* 00h */ |
| U8 PageLength; /* 01h */ |
| U8 PageNumber; /* 02h */ |
| U8 PageType; /* 03h */ |
| } CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, |
| ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; |
| |
| typedef union _CONFIG_PAGE_HEADER_UNION |
| { |
| ConfigPageHeader_t Struct; |
| U8 Bytes[4]; |
| U16 Word16[2]; |
| U32 Word32; |
| } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, |
| CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; |
| |
| typedef struct _CONFIG_EXTENDED_PAGE_HEADER |
| { |
| U8 PageVersion; /* 00h */ |
| U8 Reserved1; /* 01h */ |
| U8 PageNumber; /* 02h */ |
| U8 PageType; /* 03h */ |
| U16 ExtPageLength; /* 04h */ |
| U8 ExtPageType; /* 06h */ |
| U8 Reserved2; /* 07h */ |
| } CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER, |
| ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t; |
| |
| |
| |
| /**************************************************************************** |
| * PageType field values |
| ****************************************************************************/ |
| #define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) |
| #define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) |
| #define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) |
| #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) |
| #define MPI_CONFIG_PAGEATTR_MASK (0xF0) |
| |
| #define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) |
| #define MPI_CONFIG_PAGETYPE_IOC (0x01) |
| #define MPI_CONFIG_PAGETYPE_BIOS (0x02) |
| #define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) |
| #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) |
| #define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) |
| #define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) |
| #define MPI_CONFIG_PAGETYPE_LAN (0x07) |
| #define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) |
| #define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) |
| #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) |
| #define MPI_CONFIG_PAGETYPE_INBAND (0x0B) |
| #define MPI_CONFIG_PAGETYPE_EXTENDED (0x0F) |
| #define MPI_CONFIG_PAGETYPE_MASK (0x0F) |
| |
| #define MPI_CONFIG_TYPENUM_MASK (0x0FFF) |
| |
| |
| /**************************************************************************** |
| * ExtPageType field values |
| ****************************************************************************/ |
| #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) |
| #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) |
| #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) |
| #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) |
| #define MPI_CONFIG_EXTPAGETYPE_LOG (0x14) |
| #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) |
| |
| |
| /**************************************************************************** |
| * PageAddress field values |
| ****************************************************************************/ |
| #define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) |
| |
| #define MPI_SCSI_DEVICE_FORM_MASK (0xF0000000) |
| #define MPI_SCSI_DEVICE_FORM_BUS_TID (0x00000000) |
| #define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) |
| #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) |
| #define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) |
| #define MPI_SCSI_DEVICE_BUS_SHIFT (8) |
| #define MPI_SCSI_DEVICE_FORM_TARGET_MODE (0x10000000) |
| #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK (0x000000FF) |
| #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT (0) |
| #define MPI_SCSI_DEVICE_TM_BUS_MASK (0x0000FF00) |
| #define MPI_SCSI_DEVICE_TM_BUS_SHIFT (8) |
| #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK (0x00FF0000) |
| #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT (16) |
| |
| #define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) |
| #define MPI_FC_PORT_PGAD_PORT_SHIFT (28) |
| #define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) |
| #define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) |
| #define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) |
| #define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) |
| |
| #define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) |
| #define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) |
| #define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) |
| #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) |
| #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) |
| #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) |
| #define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) |
| #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) |
| #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) |
| #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) |
| #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) |
| #define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) |
| #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) |
| |
| #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) |
| #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) |
| |
| #define MPI_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) |
| #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT (28) |
| #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x00000001) |
| #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE (0x00000002) |
| #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE (0x0000FFFF) |
| #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE (0) |
| #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY (0x00FF0000) |
| #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY (16) |
| #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE (0x0000FFFF) |
| #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE (0) |
| #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE (0x0000FFFF) |
| #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE (0) |
| |
| #define MPI_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) |
| #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT (28) |
| #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID (0x00000001) |
| #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE (0x00000002) |
| #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK (0x0000FFFF) |
| #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT (0) |
| #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) |
| #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT (8) |
| #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK (0x000000FF) |
| #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT (0) |
| #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK (0x0000FFFF) |
| #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT (0) |
| |
| #define MPI_SAS_PHY_PGAD_FORM_MASK (0xF0000000) |
| #define MPI_SAS_PHY_PGAD_FORM_SHIFT (28) |
| #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x0) |
| #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x1) |
| #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) |
| #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (0) |
| #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) |
| #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT (0) |
| |
| #define MPI_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) |
| #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT (28) |
| #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE (0x00000001) |
| #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK (0x0000FFFF) |
| #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT (0) |
| #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK (0x0000FFFF) |
| #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT (0) |
| |
| |
| |
| /**************************************************************************** |
| * Config Request Message |
| ****************************************************************************/ |
| typedef struct _MSG_CONFIG |
| { |
| U8 Action; /* 00h */ |
| U8 Reserved; /* 01h */ |
| U8 ChainOffset; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 ExtPageLength; /* 04h */ |
| U8 ExtPageType; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U8 Reserved2[8]; /* 0Ch */ |
| CONFIG_PAGE_HEADER Header; /* 14h */ |
| U32 PageAddress; /* 18h */ |
| SGE_IO_UNION PageBufferSGE; /* 1Ch */ |
| } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, |
| Config_t, MPI_POINTER pConfig_t; |
| |
| |
| /**************************************************************************** |
| * Action field values |
| ****************************************************************************/ |
| #define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) |
| #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) |
| #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) |
| #define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) |
| #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) |
| #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) |
| #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) |
| |
| |
| /* Config Reply Message */ |
| typedef struct _MSG_CONFIG_REPLY |
| { |
| U8 Action; /* 00h */ |
| U8 Reserved; /* 01h */ |
| U8 MsgLength; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 ExtPageLength; /* 04h */ |
| U8 ExtPageType; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U8 Reserved2[2]; /* 0Ch */ |
| U16 IOCStatus; /* 0Eh */ |
| U32 IOCLogInfo; /* 10h */ |
| CONFIG_PAGE_HEADER Header; /* 14h */ |
| } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, |
| ConfigReply_t, MPI_POINTER pConfigReply_t; |
| |
| |
| |
| /***************************************************************************** |
| * |
| * C o n f i g u r a t i o n P a g e s |
| * |
| *****************************************************************************/ |
| |
| /**************************************************************************** |
| * Manufacturing Config pages |
| ****************************************************************************/ |
| #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000) |
| /* Fibre Channel */ |
| #define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640) |
| #define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646) |
| /* SCSI */ |
| #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) |
| #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) |
| #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) |
| #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) |
| #define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) |
| #define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) |
| /* SAS */ |
| #define MPI_MANUFACTPAGE_DEVID_SAS1064 (0x0050) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1064A (0x005C) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1064E (0x0056) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1066 (0x005E) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058) |
| #define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 ChipName[16]; /* 04h */ |
| U8 ChipRevision[8]; /* 14h */ |
| U8 BoardName[16]; /* 1Ch */ |
| U8 BoardAssembly[16]; /* 2Ch */ |
| U8 BoardTracerNumber[16]; /* 3Ch */ |
| |
| } CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, |
| ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; |
| |
| #define MPI_MANUFACTURING0_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 VPD[256]; /* 04h */ |
| } CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, |
| ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; |
| |
| #define MPI_MANUFACTURING1_PAGEVERSION (0x00) |
| |
| |
| typedef struct _MPI_CHIP_REVISION_ID |
| { |
| U16 DeviceID; /* 00h */ |
| U8 PCIRevisionID; /* 02h */ |
| U8 Reserved; /* 03h */ |
| } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, |
| MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; |
| |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS |
| #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| MPI_CHIP_REVISION_ID ChipId; /* 04h */ |
| U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ |
| } CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, |
| ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; |
| |
| #define MPI_MANUFACTURING2_PAGEVERSION (0x00) |
| |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_MAN_PAGE_3_INFO_WORDS |
| #define MPI_MAN_PAGE_3_INFO_WORDS (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_3 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| MPI_CHIP_REVISION_ID ChipId; /* 04h */ |
| U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ |
| } CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, |
| ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; |
| |
| #define MPI_MANUFACTURING3_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_4 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| U8 InfoOffset0; /* 08h */ |
| U8 InfoSize0; /* 09h */ |
| U8 InfoOffset1; /* 0Ah */ |
| U8 InfoSize1; /* 0Bh */ |
| U8 InquirySize; /* 0Ch */ |
| U8 Flags; /* 0Dh */ |
| U16 Reserved2; /* 0Eh */ |
| U8 InquiryData[56]; /* 10h */ |
| U32 ISVolumeSettings; /* 48h */ |
| U32 IMEVolumeSettings; /* 4Ch */ |
| U32 IMVolumeSettings; /* 50h */ |
| U32 Reserved3; /* 54h */ |
| U32 Reserved4; /* 58h */ |
| U32 Reserved5; /* 5Ch */ |
| U8 IMEDataScrubRate; /* 60h */ |
| U8 IMEResyncRate; /* 61h */ |
| U16 Reserved6; /* 62h */ |
| U8 IMDataScrubRate; /* 64h */ |
| U8 IMResyncRate; /* 65h */ |
| U16 Reserved7; /* 66h */ |
| U32 Reserved8; /* 68h */ |
| U32 Reserved9; /* 6Ch */ |
| } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, |
| ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; |
| |
| #define MPI_MANUFACTURING4_PAGEVERSION (0x04) |
| |
| /* defines for the Flags field */ |
| #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80) |
| #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40) |
| #define MPI_MANPAGE4_IME_DISABLE (0x20) |
| #define MPI_MANPAGE4_IM_DISABLE (0x10) |
| #define MPI_MANPAGE4_IS_DISABLE (0x08) |
| #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04) |
| #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02) |
| #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01) |
| |
| |
| #ifndef MPI_MANPAGE5_NUM_FORCEWWID |
| #define MPI_MANPAGE5_NUM_FORCEWWID (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_5 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U64 BaseWWID; /* 04h */ |
| U8 Flags; /* 0Ch */ |
| U8 NumForceWWID; /* 0Dh */ |
| U16 Reserved2; /* 0Eh */ |
| U32 Reserved3; /* 10h */ |
| U32 Reserved4; /* 14h */ |
| U64 ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */ |
| } CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5, |
| ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t; |
| |
| #define MPI_MANUFACTURING5_PAGEVERSION (0x02) |
| |
| /* defines for the Flags field */ |
| #define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_6 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 ProductSpecificInfo;/* 04h */ |
| } CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6, |
| ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t; |
| |
| #define MPI_MANUFACTURING6_PAGEVERSION (0x00) |
| |
| |
| typedef struct _MPI_MANPAGE7_CONNECTOR_INFO |
| { |
| U32 Pinout; /* 00h */ |
| U8 Connector[16]; /* 04h */ |
| U8 Location; /* 14h */ |
| U8 Reserved1; /* 15h */ |
| U16 Slot; /* 16h */ |
| U32 Reserved2; /* 18h */ |
| } MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO, |
| MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t; |
| |
| /* defines for the Pinout field */ |
| #define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) |
| #define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) |
| #define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) |
| #define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) |
| #define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) |
| #define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) |
| #define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) |
| #define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) |
| #define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002) |
| #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) |
| |
| /* defines for the Location field */ |
| #define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01) |
| #define MPI_MANPAGE7_LOCATION_INTERNAL (0x02) |
| #define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04) |
| #define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08) |
| #define MPI_MANPAGE7_LOCATION_AUTO (0x10) |
| #define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20) |
| #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check NumPhys at runtime. |
| */ |
| #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX |
| #define MPI_MANPAGE7_CONNECTOR_INFO_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_7 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| U32 Reserved2; /* 08h */ |
| U32 Flags; /* 0Ch */ |
| U8 EnclosureName[16]; /* 10h */ |
| U8 NumPhys; /* 20h */ |
| U8 Reserved3; /* 21h */ |
| U16 Reserved4; /* 22h */ |
| MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */ |
| } CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7, |
| ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t; |
| |
| #define MPI_MANUFACTURING7_PAGEVERSION (0x00) |
| |
| /* defines for the Flags field */ |
| #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_8 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 ProductSpecificInfo;/* 04h */ |
| } CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8, |
| ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t; |
| |
| #define MPI_MANUFACTURING8_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_9 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 ProductSpecificInfo;/* 04h */ |
| } CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9, |
| ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t; |
| |
| #define MPI_MANUFACTURING6_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_MANUFACTURING_10 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 ProductSpecificInfo;/* 04h */ |
| } CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10, |
| ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t; |
| |
| #define MPI_MANUFACTURING10_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * IO Unit Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_IO_UNIT_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U64 UniqueValue; /* 04h */ |
| } CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, |
| IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; |
| |
| #define MPI_IOUNITPAGE0_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_IO_UNIT_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Flags; /* 04h */ |
| } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, |
| IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; |
| |
| #define MPI_IOUNITPAGE1_PAGEVERSION (0x02) |
| |
| /* IO Unit Page 1 Flags defines */ |
| #define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) |
| #define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) |
| #define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) |
| #define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) |
| #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) |
| #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING (0x00000020) |
| #define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) |
| #define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) |
| #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) |
| #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE (0x00000200) |
| |
| typedef struct _MPI_ADAPTER_INFO |
| { |
| U8 PciBusNumber; /* 00h */ |
| U8 PciDeviceAndFunctionNumber; /* 01h */ |
| U16 AdapterFlags; /* 02h */ |
| } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, |
| MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; |
| |
| #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) |
| #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) |
| |
| typedef struct _CONFIG_PAGE_IO_UNIT_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Flags; /* 04h */ |
| U32 BiosVersion; /* 08h */ |
| MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ |
| U32 Reserved1; /* 1Ch */ |
| } CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, |
| IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; |
| |
| #define MPI_IOUNITPAGE2_PAGEVERSION (0x02) |
| |
| #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) |
| #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) |
| #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) |
| #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) |
| |
| #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) |
| #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) |
| #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY (0x00000020) |
| #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) |
| |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX |
| #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_IO_UNIT_3 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 GPIOCount; /* 04h */ |
| U8 Reserved1; /* 05h */ |
| U16 Reserved2; /* 06h */ |
| U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ |
| } CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, |
| IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; |
| |
| #define MPI_IOUNITPAGE3_PAGEVERSION (0x01) |
| |
| #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) |
| #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) |
| #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) |
| #define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) |
| |
| |
| typedef struct _CONFIG_PAGE_IO_UNIT_4 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| SGE_SIMPLE_UNION FWImageSGE; /* 08h */ |
| } CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4, |
| IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t; |
| |
| #define MPI_IOUNITPAGE4_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * IOC Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_IOC_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 TotalNVStore; /* 04h */ |
| U32 FreeNVStore; /* 08h */ |
| U16 VendorID; /* 0Ch */ |
| U16 DeviceID; /* 0Eh */ |
| U8 RevisionID; /* 10h */ |
| U8 Reserved[3]; /* 11h */ |
| U32 ClassCode; /* 14h */ |
| U16 SubsystemVendorID; /* 18h */ |
| U16 SubsystemID; /* 1Ah */ |
| } CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, |
| IOCPage0_t, MPI_POINTER pIOCPage0_t; |
| |
| #define MPI_IOCPAGE0_PAGEVERSION (0x01) |
| |
| |
| typedef struct _CONFIG_PAGE_IOC_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Flags; /* 04h */ |
| U32 CoalescingTimeout; /* 08h */ |
| U8 CoalescingDepth; /* 0Ch */ |
| U8 PCISlotNum; /* 0Dh */ |
| U8 Reserved[2]; /* 0Eh */ |
| } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, |
| IOCPage1_t, MPI_POINTER pIOCPage1_t; |
| |
| #define MPI_IOCPAGE1_PAGEVERSION (0x03) |
| |
| /* defines for the Flags field */ |
| #define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000) |
| #define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000) |
| #define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000) |
| #define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000) |
| #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE (0x00000010) |
| #define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) |
| |
| #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) |
| |
| |
| typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL |
| { |
| U8 VolumeID; /* 00h */ |
| U8 VolumeBus; /* 01h */ |
| U8 VolumeIOC; /* 02h */ |
| U8 VolumePageNumber; /* 03h */ |
| U8 VolumeType; /* 04h */ |
| U8 Flags; /* 05h */ |
| U16 Reserved3; /* 06h */ |
| } CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, |
| ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; |
| |
| /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ |
| |
| #define MPI_RAID_VOL_TYPE_IS (0x00) |
| #define MPI_RAID_VOL_TYPE_IME (0x01) |
| #define MPI_RAID_VOL_TYPE_IM (0x02) |
| #define MPI_RAID_VOL_TYPE_RAID_5 (0x03) |
| #define MPI_RAID_VOL_TYPE_RAID_6 (0x04) |
| #define MPI_RAID_VOL_TYPE_RAID_10 (0x05) |
| #define MPI_RAID_VOL_TYPE_RAID_50 (0x06) |
| #define MPI_RAID_VOL_TYPE_UNKNOWN (0xFF) |
| |
| /* IOC Page 2 Volume Flags values */ |
| |
| #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX |
| #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_IOC_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 CapabilitiesFlags; /* 04h */ |
| U8 NumActiveVolumes; /* 08h */ |
| U8 MaxVolumes; /* 09h */ |
| U8 NumActivePhysDisks; /* 0Ah */ |
| U8 MaxPhysDisks; /* 0Bh */ |
| CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ |
| } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, |
| IOCPage2_t, MPI_POINTER pIOCPage2_t; |
| |
| #define MPI_IOCPAGE2_PAGEVERSION (0x04) |
| |
| /* IOC Page 2 Capabilities flags */ |
| |
| #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) |
| #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) |
| #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) |
| #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT (0x00000008) |
| #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010) |
| #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020) |
| #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040) |
| #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING (0x10000000) |
| #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) |
| #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) |
| #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) |
| |
| |
| typedef struct _IOC_3_PHYS_DISK |
| { |
| U8 PhysDiskID; /* 00h */ |
| U8 PhysDiskBus; /* 01h */ |
| U8 PhysDiskIOC; /* 02h */ |
| U8 PhysDiskNum; /* 03h */ |
| } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, |
| Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX |
| #define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_IOC_3 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 NumPhysDisks; /* 04h */ |
| U8 Reserved1; /* 05h */ |
| U16 Reserved2; /* 06h */ |
| IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ |
| } CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, |
| IOCPage3_t, MPI_POINTER pIOCPage3_t; |
| |
| #define MPI_IOCPAGE3_PAGEVERSION (0x00) |
| |
| |
| typedef struct _IOC_4_SEP |
| { |
| U8 SEPTargetID; /* 00h */ |
| U8 SEPBus; /* 01h */ |
| U16 Reserved; /* 02h */ |
| } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, |
| Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_IOC_PAGE_4_SEP_MAX |
| #define MPI_IOC_PAGE_4_SEP_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_IOC_4 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 ActiveSEP; /* 04h */ |
| U8 MaxSEP; /* 05h */ |
| U16 Reserved1; /* 06h */ |
| IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ |
| } CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, |
| IOCPage4_t, MPI_POINTER pIOCPage4_t; |
| |
| #define MPI_IOCPAGE4_PAGEVERSION (0x00) |
| |
| |
| typedef struct _IOC_5_HOT_SPARE |
| { |
| U8 PhysDiskNum; /* 00h */ |
| U8 Reserved; /* 01h */ |
| U8 HotSparePool; /* 02h */ |
| U8 Flags; /* 03h */ |
| } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE, |
| Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t; |
| |
| /* IOC Page 5 HotSpare Flags */ |
| #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX |
| #define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_IOC_5 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| U8 NumHotSpares; /* 08h */ |
| U8 Reserved2; /* 09h */ |
| U16 Reserved3; /* 0Ah */ |
| IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ |
| } CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, |
| IOCPage5_t, MPI_POINTER pIOCPage5_t; |
| |
| #define MPI_IOCPAGE5_PAGEVERSION (0x00) |
| |
| typedef struct _CONFIG_PAGE_IOC_6 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 CapabilitiesFlags; /* 04h */ |
| U8 MaxDrivesIS; /* 08h */ |
| U8 MaxDrivesIM; /* 09h */ |
| U8 MaxDrivesIME; /* 0Ah */ |
| U8 Reserved1; /* 0Bh */ |
| U8 MinDrivesIS; /* 0Ch */ |
| U8 MinDrivesIM; /* 0Dh */ |
| U8 MinDrivesIME; /* 0Eh */ |
| U8 Reserved2; /* 0Fh */ |
| U8 MaxGlobalHotSpares; /* 10h */ |
| U8 Reserved3; /* 11h */ |
| U16 Reserved4; /* 12h */ |
| U32 Reserved5; /* 14h */ |
| U32 SupportedStripeSizeMapIS; /* 18h */ |
| U32 SupportedStripeSizeMapIME; /* 1Ch */ |
| U32 Reserved6; /* 20h */ |
| U8 MetadataSize; /* 24h */ |
| U8 Reserved7; /* 25h */ |
| U16 Reserved8; /* 26h */ |
| U16 MaxBadBlockTableEntries; /* 28h */ |
| U16 Reserved9; /* 2Ah */ |
| U16 IRNvsramUsage; /* 2Ch */ |
| U16 Reserved10; /* 2Eh */ |
| U32 IRNvsramVersion; /* 30h */ |
| U32 Reserved11; /* 34h */ |
| U32 Reserved12; /* 38h */ |
| } CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6, |
| IOCPage6_t, MPI_POINTER pIOCPage6_t; |
| |
| #define MPI_IOCPAGE6_PAGEVERSION (0x01) |
| |
| /* IOC Page 6 Capabilities Flags */ |
| |
| #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006) |
| #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE (0x00000000) |
| #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE (0x00000002) |
| |
| #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) |
| |
| |
| /**************************************************************************** |
| * BIOS Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_BIOS_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 BiosOptions; /* 04h */ |
| U32 IOCSettings; /* 08h */ |
| U32 Reserved1; /* 0Ch */ |
| U32 DeviceSettings; /* 10h */ |
| U16 NumberOfDevices; /* 14h */ |
| U8 ExpanderSpinup; /* 16h */ |
| U8 Reserved2; /* 17h */ |
| U16 IOTimeoutBlockDevicesNonRM; /* 18h */ |
| U16 IOTimeoutSequential; /* 1Ah */ |
| U16 IOTimeoutOther; /* 1Ch */ |
| U16 IOTimeoutBlockDevicesRM; /* 1Eh */ |
| } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, |
| BIOSPage1_t, MPI_POINTER pBIOSPage1_t; |
| |
| #define MPI_BIOSPAGE1_PAGEVERSION (0x03) |
| |
| /* values for the BiosOptions field */ |
| #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400) |
| #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE (0x00000200) |
| #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE (0x00000100) |
| #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) |
| |
| /* values for the IOCSettings field */ |
| #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000) |
| #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000) |
| #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20) |
| |
| #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000) |
| #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) |
| #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) |
| #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP (0x0000F000) |
| #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP (12) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY (0x00000F00) |
| #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY (8) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) |
| #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) |
| #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) |
| #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) |
| |
| #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) |
| #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) |
| #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) |
| #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) |
| #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) |
| |
| #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) |
| |
| /* values for the DeviceSettings field */ |
| #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) |
| #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) |
| #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) |
| #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) |
| |
| /* defines for the ExpanderSpinup field */ |
| #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0) |
| #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4) |
| #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F) |
| |
| typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER |
| { |
| U32 Reserved1; /* 00h */ |
| U32 Reserved2; /* 04h */ |
| U32 Reserved3; /* 08h */ |
| U32 Reserved4; /* 0Ch */ |
| U32 Reserved5; /* 10h */ |
| U32 Reserved6; /* 14h */ |
| U32 Reserved7; /* 18h */ |
| U32 Reserved8; /* 1Ch */ |
| U32 Reserved9; /* 20h */ |
| U32 Reserved10; /* 24h */ |
| U32 Reserved11; /* 28h */ |
| U32 Reserved12; /* 2Ch */ |
| U32 Reserved13; /* 30h */ |
| U32 Reserved14; /* 34h */ |
| U32 Reserved15; /* 38h */ |
| U32 Reserved16; /* 3Ch */ |
| U32 Reserved17; /* 40h */ |
| } MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER; |
| |
| typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER |
| { |
| U8 TargetID; /* 00h */ |
| U8 Bus; /* 01h */ |
| U8 AdapterNumber; /* 02h */ |
| U8 Reserved1; /* 03h */ |
| U32 Reserved2; /* 04h */ |
| U32 Reserved3; /* 08h */ |
| U32 Reserved4; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U32 Reserved5; /* 18h */ |
| U32 Reserved6; /* 1Ch */ |
| U32 Reserved7; /* 20h */ |
| U32 Reserved8; /* 24h */ |
| U32 Reserved9; /* 28h */ |
| U32 Reserved10; /* 2Ch */ |
| U32 Reserved11; /* 30h */ |
| U32 Reserved12; /* 34h */ |
| U32 Reserved13; /* 38h */ |
| U32 Reserved14; /* 3Ch */ |
| U32 Reserved15; /* 40h */ |
| } MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER; |
| |
| typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS |
| { |
| U8 TargetID; /* 00h */ |
| U8 Bus; /* 01h */ |
| U16 PCIAddress; /* 02h */ |
| U32 Reserved1; /* 04h */ |
| U32 Reserved2; /* 08h */ |
| U32 Reserved3; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U32 Reserved4; /* 18h */ |
| U32 Reserved5; /* 1Ch */ |
| U32 Reserved6; /* 20h */ |
| U32 Reserved7; /* 24h */ |
| U32 Reserved8; /* 28h */ |
| U32 Reserved9; /* 2Ch */ |
| U32 Reserved10; /* 30h */ |
| U32 Reserved11; /* 34h */ |
| U32 Reserved12; /* 38h */ |
| U32 Reserved13; /* 3Ch */ |
| U32 Reserved14; /* 40h */ |
| } MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS; |
| |
| typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER |
| { |
| U8 TargetID; /* 00h */ |
| U8 Bus; /* 01h */ |
| U8 PCISlotNumber; /* 02h */ |
| U8 Reserved1; /* 03h */ |
| U32 Reserved2; /* 04h */ |
| U32 Reserved3; /* 08h */ |
| U32 Reserved4; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U32 Reserved5; /* 18h */ |
| U32 Reserved6; /* 1Ch */ |
| U32 Reserved7; /* 20h */ |
| U32 Reserved8; /* 24h */ |
| U32 Reserved9; /* 28h */ |
| U32 Reserved10; /* 2Ch */ |
| U32 Reserved11; /* 30h */ |
| U32 Reserved12; /* 34h */ |
| U32 Reserved13; /* 38h */ |
| U32 Reserved14; /* 3Ch */ |
| U32 Reserved15; /* 40h */ |
| } MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER; |
| |
| typedef struct _MPI_BOOT_DEVICE_FC_WWN |
| { |
| U64 WWPN; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 Reserved2; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U32 Reserved3; /* 18h */ |
| U32 Reserved4; /* 1Ch */ |
| U32 Reserved5; /* 20h */ |
| U32 Reserved6; /* 24h */ |
| U32 Reserved7; /* 28h */ |
| U32 Reserved8; /* 2Ch */ |
| U32 Reserved9; /* 30h */ |
| U32 Reserved10; /* 34h */ |
| U32 Reserved11; /* 38h */ |
| U32 Reserved12; /* 3Ch */ |
| U32 Reserved13; /* 40h */ |
| } MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN; |
| |
| typedef struct _MPI_BOOT_DEVICE_SAS_WWN |
| { |
| U64 SASAddress; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 Reserved2; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U32 Reserved3; /* 18h */ |
| U32 Reserved4; /* 1Ch */ |
| U32 Reserved5; /* 20h */ |
| U32 Reserved6; /* 24h */ |
| U32 Reserved7; /* 28h */ |
| U32 Reserved8; /* 2Ch */ |
| U32 Reserved9; /* 30h */ |
| U32 Reserved10; /* 34h */ |
| U32 Reserved11; /* 38h */ |
| U32 Reserved12; /* 3Ch */ |
| U32 Reserved13; /* 40h */ |
| } MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN; |
| |
| typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT |
| { |
| U64 EnclosureLogicalID; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 Reserved2; /* 0Ch */ |
| U8 LUN[8]; /* 10h */ |
| U16 SlotNumber; /* 18h */ |
| U16 Reserved3; /* 1Ah */ |
| U32 Reserved4; /* 1Ch */ |
| U32 Reserved5; /* 20h */ |
| U32 Reserved6; /* 24h */ |
| U32 Reserved7; /* 28h */ |
| U32 Reserved8; /* 2Ch */ |
| U32 Reserved9; /* 30h */ |
| U32 Reserved10; /* 34h */ |
| U32 Reserved11; /* 38h */ |
| U32 Reserved12; /* 3Ch */ |
| U32 Reserved13; /* 40h */ |
| } MPI_BOOT_DEVICE_ENCLOSURE_SLOT, |
| MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT; |
| |
| typedef union _MPI_BIOSPAGE2_BOOT_DEVICE |
| { |
| MPI_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; |
| MPI_BOOT_DEVICE_ADAPTER_NUMBER AdapterNumber; |
| MPI_BOOT_DEVICE_PCI_ADDRESS PCIAddress; |
| MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber; |
| MPI_BOOT_DEVICE_FC_WWN FcWwn; |
| MPI_BOOT_DEVICE_SAS_WWN SasWwn; |
| MPI_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; |
| } MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE; |
| |
| typedef struct _CONFIG_PAGE_BIOS_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| U32 Reserved2; /* 08h */ |
| U32 Reserved3; /* 0Ch */ |
| U32 Reserved4; /* 10h */ |
| U32 Reserved5; /* 14h */ |
| U32 Reserved6; /* 18h */ |
| U8 BootDeviceForm; /* 1Ch */ |
| U8 PrevBootDeviceForm; /* 1Ch */ |
| U16 Reserved8; /* 1Eh */ |
| MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ |
| } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, |
| BIOSPage2_t, MPI_POINTER pBIOSPage2_t; |
| |
| #define MPI_BIOSPAGE2_PAGEVERSION (0x02) |
| |
| #define MPI_BIOSPAGE2_FORM_MASK (0x0F) |
| #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) |
| #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER (0x01) |
| #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS (0x02) |
| #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER (0x03) |
| #define MPI_BIOSPAGE2_FORM_FC_WWN (0x04) |
| #define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05) |
| #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) |
| |
| |
| /**************************************************************************** |
| * SCSI Port Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SCSI_PORT_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Capabilities; /* 04h */ |
| U32 PhysicalInterface; /* 08h */ |
| } CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, |
| SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; |
| |
| #define MPI_SCSIPORTPAGE0_PAGEVERSION (0x02) |
| |
| #define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) |
| #define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) |
| #define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) |
| #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) |
| #define MPI_SCSIPORTPAGE0_SYNC_ASYNC (0x00) |
| #define MPI_SCSIPORTPAGE0_SYNC_5 (0x32) |
| #define MPI_SCSIPORTPAGE0_SYNC_10 (0x19) |
| #define MPI_SCSIPORTPAGE0_SYNC_20 (0x0C) |
| #define MPI_SCSIPORTPAGE0_SYNC_33_33 (0x0B) |
| #define MPI_SCSIPORTPAGE0_SYNC_40 (0x0A) |
| #define MPI_SCSIPORTPAGE0_SYNC_80 (0x09) |
| #define MPI_SCSIPORTPAGE0_SYNC_160 (0x08) |
| #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN (0xFF) |
| |
| #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8) |
| #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \ |
| ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \ |
| >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \ |
| ) |
| #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) |
| #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16) |
| #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \ |
| ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \ |
| >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \ |
| ) |
| #define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000) |
| #define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) |
| #define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) |
| |
| #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) |
| #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) |
| #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) |
| #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) |
| #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000) |
| #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24) |
| #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE) |
| #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF) |
| |
| |
| typedef struct _CONFIG_PAGE_SCSI_PORT_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Configuration; /* 04h */ |
| U32 OnBusTimerValue; /* 08h */ |
| U8 TargetConfig; /* 0Ch */ |
| U8 Reserved1; /* 0Dh */ |
| U16 IDConfig; /* 0Eh */ |
| } CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, |
| SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; |
| |
| #define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03) |
| |
| /* Configuration values */ |
| #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) |
| #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) |
| #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID (16) |
| |
| /* TargetConfig values */ |
| #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01) |
| #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02) |
| |
| |
| typedef struct _MPI_DEVICE_INFO |
| { |
| U8 Timeout; /* 00h */ |
| U8 SyncFactor; /* 01h */ |
| U16 DeviceFlags; /* 02h */ |
| } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, |
| MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; |
| |
| typedef struct _CONFIG_PAGE_SCSI_PORT_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 PortFlags; /* 04h */ |
| U32 PortSettings; /* 08h */ |
| MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ |
| } CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, |
| SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; |
| |
| #define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) |
| |
| /* PortFlags values */ |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) |
| |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020) |
| #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060) |
| |
| |
| /* PortSettings values */ |
| #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) |
| #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) |
| #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) |
| #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) |
| #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) |
| #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) |
| #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) |
| #define MPI_SCSIPORTPAGE2_PORT_RM_NONE (0x00000000) |
| #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY (0x00000040) |
| #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA (0x00000080) |
| #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) |
| #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY (8) |
| #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) |
| #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) |
| #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) |
| #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) |
| |
| #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) |
| #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) |
| #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) |
| #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) |
| #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) |
| #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) |
| |
| |
| /**************************************************************************** |
| * SCSI Target Device Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 NegotiatedParameters; /* 04h */ |
| U32 Information; /* 08h */ |
| } CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, |
| SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; |
| |
| #define MPI_SCSIDEVPAGE0_PAGEVERSION (0x04) |
| |
| #define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) |
| #define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) |
| #define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) |
| #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008) |
| #define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010) |
| #define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020) |
| #define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040) |
| #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080) |
| #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) |
| #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD (8) |
| #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) |
| #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET (16) |
| #define MPI_SCSIDEVPAGE0_NP_IDP (0x08000000) |
| #define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) |
| #define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) |
| |
| #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) |
| #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) |
| #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) |
| #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) |
| |
| |
| typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 RequestedParameters; /* 04h */ |
| U32 Reserved; /* 08h */ |
| U32 Configuration; /* 0Ch */ |
| } CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, |
| SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; |
| |
| #define MPI_SCSIDEVPAGE1_PAGEVERSION (0x05) |
| |
| #define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) |
| #define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) |
| #define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) |
| #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008) |
| #define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010) |
| #define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020) |
| #define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040) |
| #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080) |
| #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) |
| #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD (8) |
| #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) |
| #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET (16) |
| #define MPI_SCSIDEVPAGE1_RP_IDP (0x08000000) |
| #define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) |
| #define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) |
| |
| #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) |
| #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) |
| #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008) |
| #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010) |
| |
| |
| typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 DomainValidation; /* 04h */ |
| U32 ParityPipeSelect; /* 08h */ |
| U32 DataPipeSelect; /* 0Ch */ |
| } CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, |
| SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; |
| |
| #define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) |
| |
| #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) |
| #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) |
| #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) |
| #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) |
| #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) |
| #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) |
| #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) |
| #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) |
| #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) |
| |
| #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) |
| |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) |
| #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) |
| |
| |
| typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U16 MsgRejectCount; /* 04h */ |
| U16 PhaseErrorCount; /* 06h */ |
| U16 ParityErrorCount; /* 08h */ |
| U16 Reserved; /* 0Ah */ |
| } CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, |
| SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; |
| |
| #define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) |
| |
| #define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE) |
| #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF) |
| |
| |
| /**************************************************************************** |
| * FC Port Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Flags; /* 04h */ |
| U8 MPIPortNumber; /* 08h */ |
| U8 LinkType; /* 09h */ |
| U8 PortState; /* 0Ah */ |
| U8 Reserved; /* 0Bh */ |
| U32 PortIdentifier; /* 0Ch */ |
| U64 WWNN; /* 10h */ |
| U64 WWPN; /* 18h */ |
| U32 SupportedServiceClass; /* 20h */ |
| U32 SupportedSpeeds; /* 24h */ |
| U32 CurrentSpeed; /* 28h */ |
| U32 MaxFrameSize; /* 2Ch */ |
| U64 FabricWWNN; /* 30h */ |
| U64 FabricWWPN; /* 38h */ |
| U32 DiscoveredPortsCount; /* 40h */ |
| U32 MaxInitiators; /* 44h */ |
| U8 MaxAliasesSupported; /* 48h */ |
| U8 MaxHardAliasesSupported; /* 49h */ |
| U8 NumCurrentAliases; /* 4Ah */ |
| U8 Reserved1; /* 4Bh */ |
| } CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, |
| FCPortPage0_t, MPI_POINTER pFCPortPage0_t; |
| |
| #define MPI_FCPORTPAGE0_PAGEVERSION (0x02) |
| |
| #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) |
| #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) |
| #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) |
| #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) |
| #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) |
| |
| #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) |
| #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) |
| #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040) |
| |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) |
| #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) |
| |
| #define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) |
| #define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) |
| #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) |
| #define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) |
| #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) |
| #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) |
| #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) |
| #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) |
| #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) |
| #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) |
| #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) |
| #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) |
| #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) |
| #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) |
| #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) |
| #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) |
| |
| #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ |
| #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ |
| |
| #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) |
| #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) |
| #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) |
| |
| #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0 Unknown - transceiver incapable of reporting */ |
| #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ |
| #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ |
| #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ |
| #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT 8 4 GBit/sec */ |
| |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED |
| #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED (0x00008000) /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */ |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Flags; /* 04h */ |
| U64 NoSEEPROMWWNN; /* 08h */ |
| U64 NoSEEPROMWWPN; /* 10h */ |
| U8 HardALPA; /* 18h */ |
| U8 LinkConfig; /* 19h */ |
| U8 TopologyConfig; /* 1Ah */ |
| U8 AltConnector; /* 1Bh */ |
| U8 NumRequestedAliases; /* 1Ch */ |
| U8 RR_TOV; /* 1Dh */ |
| U8 InitiatorDeviceTimeout; /* 1Eh */ |
| U8 InitiatorIoPendTimeout; /* 1Fh */ |
| } CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, |
| FCPortPage1_t, MPI_POINTER pFCPortPage1_t; |
| |
| #define MPI_FCPORTPAGE1_PAGEVERSION (0x06) |
| |
| #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) |
| #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) |
| #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000) |
| #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000) |
| #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) |
| #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) |
| #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000) |
| #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE (0x00000080) |
| #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) |
| #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) |
| #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) |
| #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002) |
| #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) |
| #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) |
| |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) |
| #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) |
| |
| #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000) |
| #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010) |
| #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030) |
| #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050) |
| |
| #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) |
| |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) |
| #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) |
| |
| #define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) |
| #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) |
| #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) |
| #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) |
| |
| #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) |
| |
| #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F) |
| #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16 (0x80) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_2 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 NumberActive; /* 04h */ |
| U8 ALPA[127]; /* 05h */ |
| } CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, |
| FCPortPage2_t, MPI_POINTER pFCPortPage2_t; |
| |
| #define MPI_FCPORTPAGE2_PAGEVERSION (0x01) |
| |
| |
| typedef struct _WWN_FORMAT |
| { |
| U64 WWNN; /* 00h */ |
| U64 WWPN; /* 08h */ |
| } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, |
| WWNFormat, MPI_POINTER pWWNFormat; |
| |
| typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID |
| { |
| WWN_FORMAT WWN; |
| U32 Did; |
| } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, |
| PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; |
| |
| typedef struct _FC_PORT_PERSISTENT |
| { |
| FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ |
| U8 TargetID; /* 10h */ |
| U8 Bus; /* 11h */ |
| U16 Flags; /* 12h */ |
| } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, |
| PersistentData_t, MPI_POINTER pPersistentData_t; |
| |
| #define MPI_PERSISTENT_FLAGS_SHIFT (16) |
| #define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) |
| #define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) |
| #define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) |
| #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) |
| #define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX |
| #define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_3 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ |
| } CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, |
| FCPortPage3_t, MPI_POINTER pFCPortPage3_t; |
| |
| #define MPI_FCPORTPAGE3_PAGEVERSION (0x01) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_4 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 PortFlags; /* 04h */ |
| U32 PortSettings; /* 08h */ |
| } CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, |
| FCPortPage4_t, MPI_POINTER pFCPortPage4_t; |
| |
| #define MPI_FCPORTPAGE4_PAGEVERSION (0x00) |
| |
| #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) |
| |
| #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) |
| #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) |
| #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) |
| #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) |
| #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) |
| #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) |
| #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO |
| { |
| U8 Flags; /* 00h */ |
| U8 AliasAlpa; /* 01h */ |
| U16 Reserved; /* 02h */ |
| U64 AliasWWNN; /* 04h */ |
| U64 AliasWWPN; /* 0Ch */ |
| } CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, |
| MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, |
| FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_5 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| CONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ |
| } CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, |
| FCPortPage5_t, MPI_POINTER pFCPortPage5_t; |
| |
| #define MPI_FCPORTPAGE5_PAGEVERSION (0x02) |
| |
| #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01) |
| #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02) |
| #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04) |
| #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08) |
| #define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10) |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_6 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved; /* 04h */ |
| U64 TimeSinceReset; /* 08h */ |
| U64 TxFrames; /* 10h */ |
| U64 RxFrames; /* 18h */ |
| U64 TxWords; /* 20h */ |
| U64 RxWords; /* 28h */ |
| U64 LipCount; /* 30h */ |
| U64 NosCount; /* 38h */ |
| U64 ErrorFrames; /* 40h */ |
| U64 DumpedFrames; /* 48h */ |
| U64 LinkFailureCount; /* 50h */ |
| U64 LossOfSyncCount; /* 58h */ |
| U64 LossOfSignalCount; /* 60h */ |
| U64 PrimativeSeqErrCount; /* 68h */ |
| U64 InvalidTxWordCount; /* 70h */ |
| U64 InvalidCrcCount; /* 78h */ |
| U64 FcpInitiatorIoCount; /* 80h */ |
| } CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, |
| FCPortPage6_t, MPI_POINTER pFCPortPage6_t; |
| |
| #define MPI_FCPORTPAGE6_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_7 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved; /* 04h */ |
| U8 PortSymbolicName[256]; /* 08h */ |
| } CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, |
| FCPortPage7_t, MPI_POINTER pFCPortPage7_t; |
| |
| #define MPI_FCPORTPAGE7_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_8 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 BitVector[8]; /* 04h */ |
| } CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, |
| FCPortPage8_t, MPI_POINTER pFCPortPage8_t; |
| |
| #define MPI_FCPORTPAGE8_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_9 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved; /* 04h */ |
| U64 GlobalWWPN; /* 08h */ |
| U64 GlobalWWNN; /* 10h */ |
| U32 UnitType; /* 18h */ |
| U32 PhysicalPortNumber; /* 1Ch */ |
| U32 NumAttachedNodes; /* 20h */ |
| U16 IPVersion; /* 24h */ |
| U16 UDPPortNumber; /* 26h */ |
| U8 IPAddress[16]; /* 28h */ |
| U16 Reserved1; /* 38h */ |
| U16 TopologyDiscoveryFlags; /* 3Ah */ |
| } CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, |
| FCPortPage9_t, MPI_POINTER pFCPortPage9_t; |
| |
| #define MPI_FCPORTPAGE9_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA |
| { |
| U8 Id; /* 10h */ |
| U8 ExtId; /* 11h */ |
| U8 Connector; /* 12h */ |
| U8 Transceiver[8]; /* 13h */ |
| U8 Encoding; /* 1Bh */ |
| U8 BitRate_100mbs; /* 1Ch */ |
| U8 Reserved1; /* 1Dh */ |
| U8 Length9u_km; /* 1Eh */ |
| U8 Length9u_100m; /* 1Fh */ |
| U8 Length50u_10m; /* 20h */ |
| U8 Length62p5u_10m; /* 21h */ |
| U8 LengthCopper_m; /* 22h */ |
| U8 Reseverved2; /* 22h */ |
| U8 VendorName[16]; /* 24h */ |
| U8 Reserved3; /* 34h */ |
| U8 VendorOUI[3]; /* 35h */ |
| U8 VendorPN[16]; /* 38h */ |
| U8 VendorRev[4]; /* 48h */ |
| U16 Wavelength; /* 4Ch */ |
| U8 Reserved4; /* 4Eh */ |
| U8 CC_BASE; /* 4Fh */ |
| } CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, |
| MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, |
| FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; |
| |
| #define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00) |
| #define MPI_FCPORT10_BASE_ID_GBIC (0x01) |
| #define MPI_FCPORT10_BASE_ID_FIXED (0x02) |
| #define MPI_FCPORT10_BASE_ID_SFP (0x03) |
| #define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04) |
| #define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F) |
| #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80) |
| |
| #define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03) |
| #define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06) |
| #define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07) |
| #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80) |
| |
| #define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00) |
| #define MPI_FCPORT10_BASE_CONN_SC (0x01) |
| #define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02) |
| #define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03) |
| #define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04) |
| #define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05) |
| #define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06) |
| #define MPI_FCPORT10_BASE_CONN_LC (0x07) |
| #define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08) |
| #define MPI_FCPORT10_BASE_CONN_MU (0x09) |
| #define MPI_FCPORT10_BASE_CONN_SG (0x0A) |
| #define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B) |
| #define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C) |
| #define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F) |
| #define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20) |
| #define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21) |
| #define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22) |
| #define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F) |
| #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80) |
| |
| #define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00) |
| #define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01) |
| #define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02) |
| #define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03) |
| #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA |
| { |
| U8 Options[2]; /* 50h */ |
| U8 BitRateMax; /* 52h */ |
| U8 BitRateMin; /* 53h */ |
| U8 VendorSN[16]; /* 54h */ |
| U8 DateCode[8]; /* 64h */ |
| U8 DiagMonitoringType; /* 6Ch */ |
| U8 EnhancedOptions; /* 6Dh */ |
| U8 SFF8472Compliance; /* 6Eh */ |
| U8 CC_EXT; /* 6Fh */ |
| } CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, |
| MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, |
| FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; |
| |
| #define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20) |
| #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10) |
| #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08) |
| #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04) |
| #define MPI_FCPORT10_EXT_OPTION1_LOS (0x02) |
| |
| |
| typedef struct _CONFIG_PAGE_FC_PORT_10 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 Flags; /* 04h */ |
| U8 Reserved1; /* 05h */ |
| U16 Reserved2; /* 06h */ |
| U32 HwConfig1; /* 08h */ |
| U32 HwConfig2; /* 0Ch */ |
| CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ |
| CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ |
| U8 VendorSpecific[32]; /* 70h */ |
| } CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, |
| FCPortPage10_t, MPI_POINTER pFCPortPage10_t; |
| |
| #define MPI_FCPORTPAGE10_PAGEVERSION (0x01) |
| |
| /* standard MODDEF pin definitions (from GBIC spec.) */ |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001) |
| #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000) |
| |
| #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010) |
| #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020) |
| |
| |
| /**************************************************************************** |
| * FC Device Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_FC_DEVICE_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U64 WWNN; /* 04h */ |
| U64 WWPN; /* 0Ch */ |
| U32 PortIdentifier; /* 14h */ |
| U8 Protocol; /* 18h */ |
| U8 Flags; /* 19h */ |
| U16 BBCredit; /* 1Ah */ |
| U16 MaxRxFrameSize; /* 1Ch */ |
| U8 ADISCHardALPA; /* 1Eh */ |
| U8 PortNumber; /* 1Fh */ |
| U8 FcPhLowestVersion; /* 20h */ |
| U8 FcPhHighestVersion; /* 21h */ |
| U8 CurrentTargetID; /* 22h */ |
| U8 CurrentBus; /* 23h */ |
| } CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, |
| FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; |
| |
| #define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) |
| |
| #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) |
| #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02) |
| #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04) |
| |
| #define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) |
| #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) |
| #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) |
| #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08) |
| |
| #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) |
| #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) |
| |
| #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF) |
| |
| /**************************************************************************** |
| * RAID Volume Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _RAID_VOL0_PHYS_DISK |
| { |
| U16 Reserved; /* 00h */ |
| U8 PhysDiskMap; /* 02h */ |
| U8 PhysDiskNum; /* 03h */ |
| } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, |
| RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; |
| |
| #define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) |
| #define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) |
| |
| typedef struct _RAID_VOL0_STATUS |
| { |
| U8 Flags; /* 00h */ |
| U8 State; /* 01h */ |
| U16 Reserved; /* 02h */ |
| } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, |
| RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; |
| |
| /* RAID Volume Page 0 VolumeStatus defines */ |
| #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) |
| #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) |
| #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) |
| #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08) |
| #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x10) |
| |
| #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) |
| #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) |
| #define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) |
| #define MPI_RAIDVOL0_STATUS_STATE_MISSING (0x03) |
| |
| typedef struct _RAID_VOL0_SETTINGS |
| { |
| U16 Settings; /* 00h */ |
| U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ |
| U8 Reserved; /* 02h */ |
| } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, |
| RaidVol0Settings, MPI_POINTER pRaidVol0Settings; |
| |
| /* RAID Volume Page 0 VolumeSettings defines */ |
| #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) |
| #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) |
| #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) |
| #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) |
| #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */ |
| |
| #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE (0x00C0) |
| #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE (0x0000) |
| #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE (0x0040) |
| |
| #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) |
| #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) |
| |
| /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ |
| #define MPI_RAID_HOT_SPARE_POOL_0 (0x01) |
| #define MPI_RAID_HOT_SPARE_POOL_1 (0x02) |
| #define MPI_RAID_HOT_SPARE_POOL_2 (0x04) |
| #define MPI_RAID_HOT_SPARE_POOL_3 (0x08) |
| #define MPI_RAID_HOT_SPARE_POOL_4 (0x10) |
| #define MPI_RAID_HOT_SPARE_POOL_5 (0x20) |
| #define MPI_RAID_HOT_SPARE_POOL_6 (0x40) |
| #define MPI_RAID_HOT_SPARE_POOL_7 (0x80) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX |
| #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_RAID_VOL_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 VolumeID; /* 04h */ |
| U8 VolumeBus; /* 05h */ |
| U8 VolumeIOC; /* 06h */ |
| U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ |
| RAID_VOL0_STATUS VolumeStatus; /* 08h */ |
| RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ |
| U32 MaxLBA; /* 10h */ |
| U32 MaxLBAHigh; /* 14h */ |
| U32 StripeSize; /* 18h */ |
| U32 Reserved2; /* 1Ch */ |
| U32 Reserved3; /* 20h */ |
| U8 NumPhysDisks; /* 24h */ |
| U8 DataScrubRate; /* 25h */ |
| U8 ResyncRate; /* 26h */ |
| U8 InactiveStatus; /* 27h */ |
| RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ |
| } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, |
| RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; |
| |
| #define MPI_RAIDVOLPAGE0_PAGEVERSION (0x07) |
| |
| /* values for RAID Volume Page 0 InactiveStatus field */ |
| #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) |
| #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) |
| #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) |
| #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) |
| #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) |
| #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) |
| #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) |
| |
| |
| typedef struct _CONFIG_PAGE_RAID_VOL_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 VolumeID; /* 01h */ |
| U8 VolumeBus; /* 02h */ |
| U8 VolumeIOC; /* 03h */ |
| U8 Reserved0; /* 04h */ |
| U8 GUID[24]; /* 05h */ |
| U8 Name[32]; /* 20h */ |
| U64 WWID; /* 40h */ |
| U32 Reserved1; /* 48h */ |
| U32 Reserved2; /* 4Ch */ |
| } CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1, |
| RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t; |
| |
| #define MPI_RAIDVOLPAGE1_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * RAID Physical Disk Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _RAID_PHYS_DISK0_ERROR_DATA |
| { |
| U8 ErrorCdbByte; /* 00h */ |
| U8 ErrorSenseKey; /* 01h */ |
| U16 Reserved; /* 02h */ |
| U16 ErrorCount; /* 04h */ |
| U8 ErrorASC; /* 06h */ |
| U8 ErrorASCQ; /* 07h */ |
| U16 SmartCount; /* 08h */ |
| U8 SmartASC; /* 0Ah */ |
| U8 SmartASCQ; /* 0Bh */ |
| } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, |
| RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; |
| |
| typedef struct _RAID_PHYS_DISK_INQUIRY_DATA |
| { |
| U8 VendorID[8]; /* 00h */ |
| U8 ProductID[16]; /* 08h */ |
| U8 ProductRevLevel[4]; /* 18h */ |
| U8 Info[32]; /* 1Ch */ |
| } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, |
| RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; |
| |
| typedef struct _RAID_PHYS_DISK0_SETTINGS |
| { |
| U8 SepID; /* 00h */ |
| U8 SepBus; /* 01h */ |
| U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ |
| U8 PhysDiskSettings; /* 03h */ |
| } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, |
| RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; |
| |
| typedef struct _RAID_PHYS_DISK0_STATUS |
| { |
| U8 Flags; /* 00h */ |
| U8 State; /* 01h */ |
| U16 Reserved; /* 02h */ |
| } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, |
| RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; |
| |
| /* RAID Volume 2 IM Physical Disk DiskStatus flags */ |
| |
| #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) |
| #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) |
| #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x04) |
| #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00) |
| #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x08) |
| |
| #define MPI_PHYSDISK0_STATUS_ONLINE (0x00) |
| #define MPI_PHYSDISK0_STATUS_MISSING (0x01) |
| #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) |
| #define MPI_PHYSDISK0_STATUS_FAILED (0x03) |
| #define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) |
| #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) |
| #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) |
| #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) |
| |
| typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 PhysDiskID; /* 04h */ |
| U8 PhysDiskBus; /* 05h */ |
| U8 PhysDiskIOC; /* 06h */ |
| U8 PhysDiskNum; /* 07h */ |
| RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ |
| U32 Reserved1; /* 0Ch */ |
| U8 ExtDiskIdentifier[8]; /* 10h */ |
| U8 DiskIdentifier[16]; /* 18h */ |
| RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ |
| RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ |
| U32 MaxLBA; /* 68h */ |
| RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ |
| } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, |
| RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; |
| |
| #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x02) |
| |
| |
| typedef struct _RAID_PHYS_DISK1_PATH |
| { |
| U8 PhysDiskID; /* 00h */ |
| U8 PhysDiskBus; /* 01h */ |
| U16 Reserved1; /* 02h */ |
| U64 WWID; /* 04h */ |
| U64 OwnerWWID; /* 0Ch */ |
| U8 OwnerIdentifier; /* 14h */ |
| U8 Reserved2; /* 15h */ |
| U16 Flags; /* 16h */ |
| } RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH, |
| RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t; |
| |
| /* RAID Physical Disk Page 1 Flags field defines */ |
| #define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) |
| #define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001) |
| |
| typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| U8 NumPhysDiskPaths; /* 04h */ |
| U8 PhysDiskNum; /* 05h */ |
| U16 Reserved2; /* 06h */ |
| U32 Reserved1; /* 08h */ |
| RAID_PHYS_DISK1_PATH Path[1]; /* 0Ch */ |
| } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1, |
| RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t; |
| |
| #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * LAN Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_LAN_0 |
| { |
| ConfigPageHeader_t Header; /* 00h */ |
| U16 TxRxModes; /* 04h */ |
| U16 Reserved; /* 06h */ |
| U32 PacketPrePad; /* 08h */ |
| } CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, |
| LANPage0_t, MPI_POINTER pLANPage0_t; |
| |
| #define MPI_LAN_PAGE0_PAGEVERSION (0x01) |
| |
| #define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) |
| #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) |
| #define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) |
| |
| typedef struct _CONFIG_PAGE_LAN_1 |
| { |
| ConfigPageHeader_t Header; /* 00h */ |
| U16 Reserved; /* 04h */ |
| U8 CurrentDeviceState; /* 06h */ |
| U8 Reserved1; /* 07h */ |
| U32 MinPacketSize; /* 08h */ |
| U32 MaxPacketSize; /* 0Ch */ |
| U32 HardwareAddressLow; /* 10h */ |
| U32 HardwareAddressHigh; /* 14h */ |
| U32 MaxWireSpeedLow; /* 18h */ |
| U32 MaxWireSpeedHigh; /* 1Ch */ |
| U32 BucketsRemaining; /* 20h */ |
| U32 MaxReplySize; /* 24h */ |
| U32 NegWireSpeedLow; /* 28h */ |
| U32 NegWireSpeedHigh; /* 2Ch */ |
| } CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, |
| LANPage1_t, MPI_POINTER pLANPage1_t; |
| |
| #define MPI_LAN_PAGE1_PAGEVERSION (0x03) |
| |
| #define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) |
| #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) |
| |
| |
| /**************************************************************************** |
| * Inband Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_INBAND_0 |
| { |
| CONFIG_PAGE_HEADER Header; /* 00h */ |
| MPI_VERSION_FORMAT InbandVersion; /* 04h */ |
| U16 MaximumBuffers; /* 08h */ |
| U16 Reserved1; /* 0Ah */ |
| } CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0, |
| InbandPage0_t, MPI_POINTER pInbandPage0_t; |
| |
| #define MPI_INBAND_PAGEVERSION (0x00) |
| |
| |
| |
| /**************************************************************************** |
| * SAS IO Unit Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA |
| { |
| U8 Port; /* 00h */ |
| U8 PortFlags; /* 01h */ |
| U8 PhyFlags; /* 02h */ |
| U8 NegotiatedLinkRate; /* 03h */ |
| U32 ControllerPhyDeviceInfo;/* 04h */ |
| U16 AttachedDeviceHandle; /* 08h */ |
| U16 ControllerDevHandle; /* 0Ah */ |
| U32 DiscoveryStatus; /* 0Ch */ |
| } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA, |
| SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_SAS_IOUNIT0_PHY_MAX |
| #define MPI_SAS_IOUNIT0_PHY_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U16 NvdataVersionDefault; /* 08h */ |
| U16 NvdataVersionPersistent; /* 0Ah */ |
| U8 NumPhys; /* 0Ch */ |
| U8 Reserved2; /* 0Dh */ |
| U16 Reserved3; /* 0Eh */ |
| MPI_SAS_IO_UNIT0_PHY_DATA PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; /* 10h */ |
| } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, |
| SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; |
| |
| #define MPI_SASIOUNITPAGE0_PAGEVERSION (0x04) |
| |
| /* values for SAS IO Unit Page 0 PortFlags */ |
| #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) |
| #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) |
| #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) |
| #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /* values for SAS IO Unit Page 0 PhyFlags */ |
| #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED (0x04) |
| #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT (0x02) |
| #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT (0x01) |
| |
| /* values for SAS IO Unit Page 0 NegotiatedLinkRate */ |
| #define MPI_SAS_IOUNIT0_RATE_UNKNOWN (0x00) |
| #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED (0x01) |
| #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION (0x02) |
| #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE (0x03) |
| #define MPI_SAS_IOUNIT0_RATE_1_5 (0x08) |
| #define MPI_SAS_IOUNIT0_RATE_3_0 (0x09) |
| |
| /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ |
| |
| /* values for SAS IO Unit Page 0 DiscoveryStatus */ |
| #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED (0x00000001) |
| #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR (0x00000008) |
| #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400) |
| #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS (0x00001000) |
| |
| |
| typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA |
| { |
| U8 Port; /* 00h */ |
| U8 PortFlags; /* 01h */ |
| U8 PhyFlags; /* 02h */ |
| U8 MaxMinLinkRate; /* 03h */ |
| U32 ControllerPhyDeviceInfo; /* 04h */ |
| U16 MaxTargetPortConnectTime; /* 08h */ |
| U16 Reserved1; /* 0Ah */ |
| } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, |
| SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI_SAS_IOUNIT1_PHY_MAX |
| #define MPI_SAS_IOUNIT1_PHY_MAX (1) |
| #endif |
| |
| typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U16 ControlFlags; /* 08h */ |
| U16 MaxNumSATATargets; /* 0Ah */ |
| U16 AdditionalControlFlags; /* 0Ch */ |
| U16 Reserved1; /* 0Eh */ |
| U8 NumPhys; /* 10h */ |
| U8 SATAMaxQDepth; /* 11h */ |
| U8 ReportDeviceMissingDelay; /* 12h */ |
| U8 IODeviceMissingDelay; /* 13h */ |
| MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ |
| } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, |
| SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; |
| |
| #define MPI_SASIOUNITPAGE1_PAGEVERSION (0x07) |
| |
| /* values for SAS IO Unit Page 1 ControlFlags */ |
| #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) |
| #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800) |
| |
| #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) |
| #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) |
| #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00) |
| #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01) |
| #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02) |
| |
| #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) |
| #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) |
| #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008) |
| #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) |
| #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) |
| #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) |
| |
| /* values for SAS IO Unit Page 1 AdditionalControlFlags */ |
| #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) |
| #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT (0x0020) |
| #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) |
| #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) |
| #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) |
| #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) |
| #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) |
| |
| /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ |
| #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) |
| #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 (0x80) |
| |
| /* values for SAS IO Unit Page 1 PortFlags */ |
| #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) |
| #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) |
| #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /* values for SAS IO Unit Page 0 PhyFlags */ |
| #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) |
| #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) |
| #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) |
| |
| /* values for SAS IO Unit Page 0 MaxMinLinkRate */ |
| #define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) |
| #define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) |
| #define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) |
| #define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) |
| #define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) |
| #define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) |
| |
| /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U8 NumDevsPerEnclosure; /* 08h */ |
| U8 Reserved1; /* 09h */ |
| U16 Reserved2; /* 0Ah */ |
| U16 MaxPersistentIDs; /* 0Ch */ |
| U16 NumPersistentIDsUsed; /* 0Eh */ |
| U8 Status; /* 10h */ |
| U8 Flags; /* 11h */ |
| U16 MaxNumPhysicalMappedIDs;/* 12h */ |
| } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, |
| SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t; |
| |
| #define MPI_SASIOUNITPAGE2_PAGEVERSION (0x06) |
| |
| /* values for SAS IO Unit Page 2 Status field */ |
| #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED (0x08) |
| #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED (0x04) |
| #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02) |
| #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01) |
| |
| /* values for SAS IO Unit Page 2 Flags field */ |
| #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS (0x01) |
| /* Physical Mapping Modes */ |
| #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE (0x0E) |
| #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE (1) |
| #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00) |
| #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01) |
| #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02) |
| #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP (0x07) |
| |
| #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10) |
| #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20) |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 MaxInvalidDwordCount; /* 0Ch */ |
| U32 InvalidDwordCountTime; /* 10h */ |
| U32 MaxRunningDisparityErrorCount; /* 14h */ |
| U32 RunningDisparityErrorTime; /* 18h */ |
| U32 MaxLossDwordSynchCount; /* 1Ch */ |
| U32 LossDwordSynchCountTime; /* 20h */ |
| U32 MaxPhyResetProblemCount; /* 24h */ |
| U32 PhyResetProblemTime; /* 28h */ |
| } CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3, |
| SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t; |
| |
| #define MPI_SASIOUNITPAGE3_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * SAS Expander Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U8 PhysicalPort; /* 08h */ |
| U8 Reserved1; /* 09h */ |
| U16 EnclosureHandle; /* 0Ah */ |
| U64 SASAddress; /* 0Ch */ |
| U32 DiscoveryStatus; /* 14h */ |
| U16 DevHandle; /* 18h */ |
| U16 ParentDevHandle; /* 1Ah */ |
| U16 ExpanderChangeCount; /* 1Ch */ |
| U16 ExpanderRouteIndexes; /* 1Eh */ |
| U8 NumPhys; /* 20h */ |
| U8 SASLevel; /* 21h */ |
| U8 Flags; /* 22h */ |
| U8 Reserved3; /* 23h */ |
| } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, |
| SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t; |
| |
| #define MPI_SASEXPANDER0_PAGEVERSION (0x03) |
| |
| /* values for SAS Expander Page 0 DiscoveryStatus field */ |
| #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) |
| #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR (0x00000008) |
| #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) |
| #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| |
| /* values for SAS Expander Page 0 Flags field */ |
| #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02) |
| #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01) |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_EXPANDER_1 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U8 PhysicalPort; /* 08h */ |
| U8 Reserved1; /* 09h */ |
| U16 Reserved2; /* 0Ah */ |
| U8 NumPhys; /* 0Ch */ |
| U8 Phy; /* 0Dh */ |
| U16 NumTableEntriesProgrammed; /* 0Eh */ |
| U8 ProgrammedLinkRate; /* 10h */ |
| U8 HwLinkRate; /* 11h */ |
| U16 AttachedDevHandle; /* 12h */ |
| U32 PhyInfo; /* 14h */ |
| U32 AttachedDeviceInfo; /* 18h */ |
| U16 OwnerDevHandle; /* 1Ch */ |
| U8 ChangeCount; /* 1Eh */ |
| U8 NegotiatedLinkRate; /* 1Fh */ |
| U8 PhyIdentifier; /* 20h */ |
| U8 AttachedPhyIdentifier; /* 21h */ |
| U8 Reserved3; /* 22h */ |
| U8 DiscoveryInfo; /* 23h */ |
| U32 Reserved4; /* 24h */ |
| } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1, |
| SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t; |
| |
| #define MPI_SASEXPANDER1_PAGEVERSION (0x01) |
| |
| /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ |
| |
| /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ |
| |
| /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ |
| |
| /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ |
| |
| /* values for SAS Expander Page 1 DiscoveryInfo field */ |
| #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY DISABLED (0x04) |
| #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) |
| #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) |
| |
| /* values for SAS Expander Page 1 NegotiatedLinkRate field */ |
| #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN (0x00) |
| #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED (0x01) |
| #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION (0x02) |
| #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE (0x03) |
| #define MPI_SAS_EXPANDER1_NEG_RATE_1_5 (0x08) |
| #define MPI_SAS_EXPANDER1_NEG_RATE_3_0 (0x09) |
| |
| |
| /**************************************************************************** |
| * SAS Device Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SAS_DEVICE_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U16 Slot; /* 08h */ |
| U16 EnclosureHandle; /* 0Ah */ |
| U64 SASAddress; /* 0Ch */ |
| U16 ParentDevHandle; /* 14h */ |
| U8 PhyNum; /* 16h */ |
| U8 AccessStatus; /* 17h */ |
| U16 DevHandle; /* 18h */ |
| U8 TargetID; /* 1Ah */ |
| U8 Bus; /* 1Bh */ |
| U32 DeviceInfo; /* 1Ch */ |
| U16 Flags; /* 20h */ |
| U8 PhysicalPort; /* 22h */ |
| U8 Reserved2; /* 23h */ |
| } CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0, |
| SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t; |
| |
| #define MPI_SASDEVICE0_PAGEVERSION (0x05) |
| |
| /* values for SAS Device Page 0 AccessStatus field */ |
| #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) |
| #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) |
| #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) |
| #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) |
| /* specific values for SATA Init failures */ |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) |
| #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) |
| |
| /* values for SAS Device Page 0 Flags field */ |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) |
| #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) |
| #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) |
| #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) |
| #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004) |
| #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002) |
| #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) |
| |
| /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */ |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_DEVICE_1 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U64 SASAddress; /* 0Ch */ |
| U32 Reserved2; /* 14h */ |
| U16 DevHandle; /* 18h */ |
| U8 TargetID; /* 1Ah */ |
| U8 Bus; /* 1Bh */ |
| U8 InitialRegDeviceFIS[20];/* 1Ch */ |
| } CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1, |
| SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t; |
| |
| #define MPI_SASDEVICE1_PAGEVERSION (0x00) |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_DEVICE_2 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U64 PhysicalIdentifier; /* 08h */ |
| U32 EnclosureMapping; /* 10h */ |
| } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2, |
| SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t; |
| |
| #define MPI_SASDEVICE2_PAGEVERSION (0x01) |
| |
| /* defines for SAS Device Page 2 EnclosureMapping field */ |
| #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT (0x0000000F) |
| #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT (0) |
| #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS (0x000007F0) |
| #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS (4) |
| #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX (0x001FF800) |
| #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX (11) |
| |
| |
| /**************************************************************************** |
| * SAS PHY Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SAS_PHY_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U16 OwnerDevHandle; /* 08h */ |
| U16 Reserved1; /* 0Ah */ |
| U64 SASAddress; /* 0Ch */ |
| U16 AttachedDevHandle; /* 14h */ |
| U8 AttachedPhyIdentifier; /* 16h */ |
| U8 Reserved2; /* 17h */ |
| U32 AttachedDeviceInfo; /* 18h */ |
| U8 ProgrammedLinkRate; /* 20h */ |
| U8 HwLinkRate; /* 21h */ |
| U8 ChangeCount; /* 22h */ |
| U8 Flags; /* 23h */ |
| U32 PhyInfo; /* 24h */ |
| } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0, |
| SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t; |
| |
| #define MPI_SASPHY0_PAGEVERSION (0x01) |
| |
| /* values for SAS PHY Page 0 ProgrammedLinkRate field */ |
| #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0) |
| #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 (0x80) |
| #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 (0x90) |
| #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK (0x0F) |
| #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 (0x08) |
| #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 (0x09) |
| |
| /* values for SAS PHY Page 0 HwLinkRate field */ |
| #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK (0xF0) |
| #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 (0x80) |
| #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 (0x90) |
| #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK (0x0F) |
| #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08) |
| #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09) |
| |
| /* values for SAS PHY Page 0 Flags field */ |
| #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) |
| |
| /* values for SAS PHY Page 0 PhyInfo field */ |
| #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000) |
| #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000) |
| #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY (0x00001000) |
| |
| #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) |
| #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) |
| |
| #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) |
| #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING (0x00000000) |
| #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) |
| #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING (0x00000020) |
| |
| #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE (0x0000000F) |
| #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE (0x00000000) |
| #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED (0x00000001) |
| #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED (0x00000002) |
| #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE (0x00000003) |
| #define MPI_SAS_PHY0_PHYINFO_RATE_1_5 (0x00000008) |
| #define MPI_SAS_PHY0_PHYINFO_RATE_3_0 (0x00000009) |
| |
| |
| typedef struct _CONFIG_PAGE_SAS_PHY_1 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 InvalidDwordCount; /* 0Ch */ |
| U32 RunningDisparityErrorCount; /* 10h */ |
| U32 LossDwordSynchCount; /* 14h */ |
| U32 PhyResetProblemCount; /* 18h */ |
| } CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1, |
| SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t; |
| |
| #define MPI_SASPHY1_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * SAS Enclosure Config Pages |
| ****************************************************************************/ |
| |
| typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U64 EnclosureLogicalID; /* 0Ch */ |
| U16 Flags; /* 14h */ |
| U16 EnclosureHandle; /* 16h */ |
| U16 NumSlots; /* 18h */ |
| U16 StartSlot; /* 1Ah */ |
| U8 StartTargetID; /* 1Ch */ |
| U8 StartBus; /* 1Dh */ |
| U8 SEPTargetID; /* 1Eh */ |
| U8 SEPBus; /* 1Fh */ |
| U32 Reserved2; /* 20h */ |
| U32 Reserved3; /* 24h */ |
| } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0, |
| SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t; |
| |
| #define MPI_SASENCLOSURE0_PAGEVERSION (0x01) |
| |
| /* values for SAS Enclosure Page 0 Flags field */ |
| #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID (0x0020) |
| #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID (0x0010) |
| |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) |
| #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) |
| |
| |
| /**************************************************************************** |
| * Log Config Pages |
| ****************************************************************************/ |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check NumLogEntries at runtime. |
| */ |
| #ifndef MPI_LOG_0_NUM_LOG_ENTRIES |
| #define MPI_LOG_0_NUM_LOG_ENTRIES (1) |
| #endif |
| |
| #define MPI_LOG_0_LOG_DATA_LENGTH (0x1C) |
| |
| typedef struct _MPI_LOG_0_ENTRY |
| { |
| U32 TimeStamp; /* 00h */ |
| U32 Reserved1; /* 04h */ |
| U16 LogSequence; /* 08h */ |
| U16 LogEntryQualifier; /* 0Ah */ |
| U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */ |
| } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY, |
| MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t; |
| |
| /* values for Log Page 0 LogEntry LogEntryQualifier field */ |
| #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) |
| #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) |
| |
| typedef struct _CONFIG_PAGE_LOG_0 |
| { |
| CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ |
| U32 Reserved1; /* 08h */ |
| U32 Reserved2; /* 0Ch */ |
| U16 NumLogEntries; /* 10h */ |
| U16 Reserved3; /* 12h */ |
| MPI_LOG_0_ENTRY LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */ |
| } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0, |
| LogPage0_t, MPI_POINTER pLogPage0_t; |
| |
| #define MPI_LOG_0_PAGEVERSION (0x01) |
| |
| |
| #endif |
| |