| /* |
| * ci13xxx_udc.c - MIPS USB IP core family device controller |
| * |
| * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. |
| * |
| * Author: David Lopo |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * Description: MIPS USB IP core family device controller |
| * Currently it only supports IP part number CI13412 |
| * |
| * This driver is composed of several blocks: |
| * - HW: hardware interface |
| * - DBG: debug facilities (optional) |
| * - UTIL: utilities |
| * - ISR: interrupts handling |
| * - ENDPT: endpoint operations (Gadget API) |
| * - GADGET: gadget operations (Gadget API) |
| * - BUS: bus glue code, bus abstraction layer |
| * |
| * Compile Options |
| * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities |
| * - STALL_IN: non-empty bulk-in pipes cannot be halted |
| * if defined mass storage compliance succeeds but with warnings |
| * => case 4: Hi > Dn |
| * => case 5: Hi > Di |
| * => case 8: Hi <> Do |
| * if undefined usbtest 13 fails |
| * - TRACE: enable function tracing (depends on DEBUG) |
| * |
| * Main Features |
| * - Chapter 9 & Mass Storage Compliance with Gadget File Storage |
| * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) |
| * - Normal & LPM support |
| * |
| * USBTEST Report |
| * - OK: 0-12, 13 (STALL_IN defined) & 14 |
| * - Not Supported: 15 & 16 (ISO) |
| * |
| * TODO List |
| * - OTG |
| * - Isochronous & Interrupt Traffic |
| * - Handle requests which spawns into several TDs |
| * - GET_STATUS(device) - always reports 0 |
| * - Gadget API (majority of optional features) |
| * - Suspend & Remote Wakeup |
| */ |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dmapool.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| |
| #include "ci13xxx_udc.h" |
| |
| |
| /****************************************************************************** |
| * DEFINE |
| *****************************************************************************/ |
| |
| #define DMA_ADDR_INVALID (~(dma_addr_t)0) |
| |
| /* ctrl register bank access */ |
| static DEFINE_SPINLOCK(udc_lock); |
| |
| /* control endpoint description */ |
| static const struct usb_endpoint_descriptor |
| ctrl_endpt_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), |
| }; |
| |
| static const struct usb_endpoint_descriptor |
| ctrl_endpt_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), |
| }; |
| |
| /* UDC descriptor */ |
| static struct ci13xxx *_udc; |
| |
| /* Interrupt statistics */ |
| #define ISR_MASK 0x1F |
| static struct { |
| u32 test; |
| u32 ui; |
| u32 uei; |
| u32 pci; |
| u32 uri; |
| u32 sli; |
| u32 none; |
| struct { |
| u32 cnt; |
| u32 buf[ISR_MASK+1]; |
| u32 idx; |
| } hndl; |
| } isr_statistics; |
| |
| /** |
| * ffs_nr: find first (least significant) bit set |
| * @x: the word to search |
| * |
| * This function returns bit number (instead of position) |
| */ |
| static int ffs_nr(u32 x) |
| { |
| int n = ffs(x); |
| |
| return n ? n-1 : 32; |
| } |
| |
| /****************************************************************************** |
| * HW block |
| *****************************************************************************/ |
| /* register bank descriptor */ |
| static struct { |
| unsigned lpm; /* is LPM? */ |
| void __iomem *abs; /* bus map offset */ |
| void __iomem *cap; /* bus map offset + CAP offset + CAP data */ |
| size_t size; /* bank size */ |
| } hw_bank; |
| |
| /* MSM specific */ |
| #define ABS_AHBBURST (0x0090UL) |
| #define ABS_AHBMODE (0x0098UL) |
| /* UDC register map */ |
| #define ABS_CAPLENGTH (0x100UL) |
| #define ABS_HCCPARAMS (0x108UL) |
| #define ABS_DCCPARAMS (0x124UL) |
| #define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL) |
| /* offset to CAPLENTGH (addr + data) */ |
| #define CAP_USBCMD (0x000UL) |
| #define CAP_USBSTS (0x004UL) |
| #define CAP_USBINTR (0x008UL) |
| #define CAP_DEVICEADDR (0x014UL) |
| #define CAP_ENDPTLISTADDR (0x018UL) |
| #define CAP_PORTSC (0x044UL) |
| #define CAP_DEVLC (0x084UL) |
| #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) |
| #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) |
| #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) |
| #define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) |
| #define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) |
| #define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) |
| #define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) |
| #define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) |
| |
| /* maximum number of enpoints: valid only after hw_device_reset() */ |
| static unsigned hw_ep_max; |
| |
| /** |
| * hw_ep_bit: calculates the bit number |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns bit number |
| */ |
| static inline int hw_ep_bit(int num, int dir) |
| { |
| return num + (dir ? 16 : 0); |
| } |
| |
| static int ep_to_bit(int n) |
| { |
| int fill = 16 - hw_ep_max / 2; |
| |
| if (n >= hw_ep_max / 2) |
| n += fill; |
| |
| return n; |
| } |
| |
| /** |
| * hw_aread: reads from register bitfield |
| * @addr: address relative to bus map |
| * @mask: bitfield mask |
| * |
| * This function returns register bitfield data |
| */ |
| static u32 hw_aread(u32 addr, u32 mask) |
| { |
| return ioread32(addr + hw_bank.abs) & mask; |
| } |
| |
| /** |
| * hw_awrite: writes to register bitfield |
| * @addr: address relative to bus map |
| * @mask: bitfield mask |
| * @data: new data |
| */ |
| static void hw_awrite(u32 addr, u32 mask, u32 data) |
| { |
| iowrite32(hw_aread(addr, ~mask) | (data & mask), |
| addr + hw_bank.abs); |
| } |
| |
| /** |
| * hw_cread: reads from register bitfield |
| * @addr: address relative to CAP offset plus content |
| * @mask: bitfield mask |
| * |
| * This function returns register bitfield data |
| */ |
| static u32 hw_cread(u32 addr, u32 mask) |
| { |
| return ioread32(addr + hw_bank.cap) & mask; |
| } |
| |
| /** |
| * hw_cwrite: writes to register bitfield |
| * @addr: address relative to CAP offset plus content |
| * @mask: bitfield mask |
| * @data: new data |
| */ |
| static void hw_cwrite(u32 addr, u32 mask, u32 data) |
| { |
| iowrite32(hw_cread(addr, ~mask) | (data & mask), |
| addr + hw_bank.cap); |
| } |
| |
| /** |
| * hw_ctest_and_clear: tests & clears register bitfield |
| * @addr: address relative to CAP offset plus content |
| * @mask: bitfield mask |
| * |
| * This function returns register bitfield data |
| */ |
| static u32 hw_ctest_and_clear(u32 addr, u32 mask) |
| { |
| u32 reg = hw_cread(addr, mask); |
| |
| iowrite32(reg, addr + hw_bank.cap); |
| return reg; |
| } |
| |
| /** |
| * hw_ctest_and_write: tests & writes register bitfield |
| * @addr: address relative to CAP offset plus content |
| * @mask: bitfield mask |
| * @data: new data |
| * |
| * This function returns register bitfield data |
| */ |
| static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data) |
| { |
| u32 reg = hw_cread(addr, ~0); |
| |
| iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap); |
| return (reg & mask) >> ffs_nr(mask); |
| } |
| |
| static int hw_device_init(void __iomem *base) |
| { |
| u32 reg; |
| |
| /* bank is a module variable */ |
| hw_bank.abs = base; |
| |
| hw_bank.cap = hw_bank.abs; |
| hw_bank.cap += ABS_CAPLENGTH; |
| hw_bank.cap += ioread8(hw_bank.cap); |
| |
| reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); |
| hw_bank.lpm = reg; |
| hw_bank.size = hw_bank.cap - hw_bank.abs; |
| hw_bank.size += CAP_LAST; |
| hw_bank.size /= sizeof(u32); |
| |
| reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); |
| hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ |
| |
| if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) |
| return -ENODEV; |
| |
| /* setup lock mode ? */ |
| |
| /* ENDPTSETUPSTAT is '0' by default */ |
| |
| /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ |
| |
| return 0; |
| } |
| /** |
| * hw_device_reset: resets chip (execute without interruption) |
| * @base: register base address |
| * |
| * This function returns an error code |
| */ |
| static int hw_device_reset(struct ci13xxx *udc) |
| { |
| /* should flush & stop before reset */ |
| hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); |
| hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); |
| |
| hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST); |
| while (hw_cread(CAP_USBCMD, USBCMD_RST)) |
| udelay(10); /* not RTOS friendly */ |
| |
| |
| if (udc->udc_driver->notify_event) |
| udc->udc_driver->notify_event(udc, |
| CI13XXX_CONTROLLER_RESET_EVENT); |
| |
| if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING) |
| hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); |
| |
| /* USBMODE should be configured step by step */ |
| hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); |
| hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); |
| hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); /* HW >= 2.3 */ |
| |
| if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { |
| pr_err("cannot enter in device mode"); |
| pr_err("lpm = %i", hw_bank.lpm); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * hw_device_state: enables/disables interrupts & starts/stops device (execute |
| * without interruption) |
| * @dma: 0 => disable, !0 => enable and set dma engine |
| * |
| * This function returns an error code |
| */ |
| static int hw_device_state(u32 dma) |
| { |
| if (dma) { |
| hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma); |
| /* interrupt, error, port change, reset, sleep/suspend */ |
| hw_cwrite(CAP_USBINTR, ~0, |
| USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); |
| hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS); |
| } else { |
| hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); |
| hw_cwrite(CAP_USBINTR, ~0, 0); |
| } |
| return 0; |
| } |
| |
| /** |
| * hw_ep_flush: flush endpoint fifo (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_flush(int num, int dir) |
| { |
| int n = hw_ep_bit(num, dir); |
| |
| do { |
| /* flush any pending transfer */ |
| hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n)); |
| while (hw_cread(CAP_ENDPTFLUSH, BIT(n))) |
| cpu_relax(); |
| } while (hw_cread(CAP_ENDPTSTAT, BIT(n))); |
| |
| return 0; |
| } |
| |
| /** |
| * hw_ep_disable: disables endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_disable(int num, int dir) |
| { |
| hw_ep_flush(num, dir); |
| hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), |
| dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); |
| return 0; |
| } |
| |
| /** |
| * hw_ep_enable: enables endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @type: endpoint type |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_enable(int num, int dir, int type) |
| { |
| u32 mask, data; |
| |
| if (dir) { |
| mask = ENDPTCTRL_TXT; /* type */ |
| data = type << ffs_nr(mask); |
| |
| mask |= ENDPTCTRL_TXS; /* unstall */ |
| mask |= ENDPTCTRL_TXR; /* reset data toggle */ |
| data |= ENDPTCTRL_TXR; |
| mask |= ENDPTCTRL_TXE; /* enable */ |
| data |= ENDPTCTRL_TXE; |
| } else { |
| mask = ENDPTCTRL_RXT; /* type */ |
| data = type << ffs_nr(mask); |
| |
| mask |= ENDPTCTRL_RXS; /* unstall */ |
| mask |= ENDPTCTRL_RXR; /* reset data toggle */ |
| data |= ENDPTCTRL_RXR; |
| mask |= ENDPTCTRL_RXE; /* enable */ |
| data |= ENDPTCTRL_RXE; |
| } |
| hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data); |
| return 0; |
| } |
| |
| /** |
| * hw_ep_get_halt: return endpoint halt status |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * |
| * This function returns 1 if endpoint halted |
| */ |
| static int hw_ep_get_halt(int num, int dir) |
| { |
| u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| |
| return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0; |
| } |
| |
| /** |
| * hw_test_and_clear_setup_status: test & clear setup status (execute without |
| * interruption) |
| * @n: endpoint number |
| * |
| * This function returns setup status |
| */ |
| static int hw_test_and_clear_setup_status(int n) |
| { |
| n = ep_to_bit(n); |
| return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n)); |
| } |
| |
| /** |
| * hw_ep_prime: primes endpoint (execute without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @is_ctrl: true if control endpoint |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_prime(int num, int dir, int is_ctrl) |
| { |
| int n = hw_ep_bit(num, dir); |
| |
| if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) |
| return -EAGAIN; |
| |
| hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n)); |
| |
| while (hw_cread(CAP_ENDPTPRIME, BIT(n))) |
| cpu_relax(); |
| if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) |
| return -EAGAIN; |
| |
| /* status shoult be tested according with manual but it doesn't work */ |
| return 0; |
| } |
| |
| /** |
| * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute |
| * without interruption) |
| * @num: endpoint number |
| * @dir: endpoint direction |
| * @value: true => stall, false => unstall |
| * |
| * This function returns an error code |
| */ |
| static int hw_ep_set_halt(int num, int dir, int value) |
| { |
| if (value != 0 && value != 1) |
| return -EINVAL; |
| |
| do { |
| u32 addr = CAP_ENDPTCTRL + num * sizeof(u32); |
| u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; |
| |
| /* data toggle - reserved for EP0 but it's in ESS */ |
| hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr); |
| |
| } while (value != hw_ep_get_halt(num, dir)); |
| |
| return 0; |
| } |
| |
| /** |
| * hw_intr_clear: disables interrupt & clears interrupt status (execute without |
| * interruption) |
| * @n: interrupt bit |
| * |
| * This function returns an error code |
| */ |
| static int hw_intr_clear(int n) |
| { |
| if (n >= REG_BITS) |
| return -EINVAL; |
| |
| hw_cwrite(CAP_USBINTR, BIT(n), 0); |
| hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); |
| return 0; |
| } |
| |
| /** |
| * hw_intr_force: enables interrupt & forces interrupt status (execute without |
| * interruption) |
| * @n: interrupt bit |
| * |
| * This function returns an error code |
| */ |
| static int hw_intr_force(int n) |
| { |
| if (n >= REG_BITS) |
| return -EINVAL; |
| |
| hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); |
| hw_cwrite(CAP_USBINTR, BIT(n), BIT(n)); |
| hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); |
| hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0); |
| return 0; |
| } |
| |
| /** |
| * hw_is_port_high_speed: test if port is high speed |
| * |
| * This function returns true if high speed port |
| */ |
| static int hw_port_is_high_speed(void) |
| { |
| return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) : |
| hw_cread(CAP_PORTSC, PORTSC_HSP); |
| } |
| |
| /** |
| * hw_port_test_get: reads port test mode value |
| * |
| * This function returns port test mode value |
| */ |
| static u8 hw_port_test_get(void) |
| { |
| return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); |
| } |
| |
| /** |
| * hw_port_test_set: writes port test mode (execute without interruption) |
| * @mode: new value |
| * |
| * This function returns an error code |
| */ |
| static int hw_port_test_set(u8 mode) |
| { |
| const u8 TEST_MODE_MAX = 7; |
| |
| if (mode > TEST_MODE_MAX) |
| return -EINVAL; |
| |
| hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); |
| return 0; |
| } |
| |
| /** |
| * hw_read_intr_enable: returns interrupt enable register |
| * |
| * This function returns register data |
| */ |
| static u32 hw_read_intr_enable(void) |
| { |
| return hw_cread(CAP_USBINTR, ~0); |
| } |
| |
| /** |
| * hw_read_intr_status: returns interrupt status register |
| * |
| * This function returns register data |
| */ |
| static u32 hw_read_intr_status(void) |
| { |
| return hw_cread(CAP_USBSTS, ~0); |
| } |
| |
| /** |
| * hw_register_read: reads all device registers (execute without interruption) |
| * @buf: destination buffer |
| * @size: buffer size |
| * |
| * This function returns number of registers read |
| */ |
| static size_t hw_register_read(u32 *buf, size_t size) |
| { |
| unsigned i; |
| |
| if (size > hw_bank.size) |
| size = hw_bank.size; |
| |
| for (i = 0; i < size; i++) |
| buf[i] = hw_aread(i * sizeof(u32), ~0); |
| |
| return size; |
| } |
| |
| /** |
| * hw_register_write: writes to register |
| * @addr: register address |
| * @data: register value |
| * |
| * This function returns an error code |
| */ |
| static int hw_register_write(u16 addr, u32 data) |
| { |
| /* align */ |
| addr /= sizeof(u32); |
| |
| if (addr >= hw_bank.size) |
| return -EINVAL; |
| |
| /* align */ |
| addr *= sizeof(u32); |
| |
| hw_awrite(addr, ~0, data); |
| return 0; |
| } |
| |
| /** |
| * hw_test_and_clear_complete: test & clear complete status (execute without |
| * interruption) |
| * @n: endpoint number |
| * |
| * This function returns complete status |
| */ |
| static int hw_test_and_clear_complete(int n) |
| { |
| n = ep_to_bit(n); |
| return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n)); |
| } |
| |
| /** |
| * hw_test_and_clear_intr_active: test & clear active interrupts (execute |
| * without interruption) |
| * |
| * This function returns active interrutps |
| */ |
| static u32 hw_test_and_clear_intr_active(void) |
| { |
| u32 reg = hw_read_intr_status() & hw_read_intr_enable(); |
| |
| hw_cwrite(CAP_USBSTS, ~0, reg); |
| return reg; |
| } |
| |
| /** |
| * hw_test_and_clear_setup_guard: test & clear setup guard (execute without |
| * interruption) |
| * |
| * This function returns guard value |
| */ |
| static int hw_test_and_clear_setup_guard(void) |
| { |
| return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0); |
| } |
| |
| /** |
| * hw_test_and_set_setup_guard: test & set setup guard (execute without |
| * interruption) |
| * |
| * This function returns guard value |
| */ |
| static int hw_test_and_set_setup_guard(void) |
| { |
| return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); |
| } |
| |
| /** |
| * hw_usb_set_address: configures USB address (execute without interruption) |
| * @value: new USB address |
| * |
| * This function returns an error code |
| */ |
| static int hw_usb_set_address(u8 value) |
| { |
| /* advance */ |
| hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, |
| value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); |
| return 0; |
| } |
| |
| /** |
| * hw_usb_reset: restart device after a bus reset (execute without |
| * interruption) |
| * |
| * This function returns an error code |
| */ |
| static int hw_usb_reset(void) |
| { |
| hw_usb_set_address(0); |
| |
| /* ESS flushes only at end?!? */ |
| hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); /* flush all EPs */ |
| |
| /* clear setup token semaphores */ |
| hw_cwrite(CAP_ENDPTSETUPSTAT, 0, 0); /* writes its content */ |
| |
| /* clear complete status */ |
| hw_cwrite(CAP_ENDPTCOMPLETE, 0, 0); /* writes its content */ |
| |
| /* wait until all bits cleared */ |
| while (hw_cread(CAP_ENDPTPRIME, ~0)) |
| udelay(10); /* not RTOS friendly */ |
| |
| /* reset all endpoints ? */ |
| |
| /* reset internal status and wait for further instructions |
| no need to verify the port reset status (ESS does it) */ |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * DBG block |
| *****************************************************************************/ |
| /** |
| * show_device: prints information about device capabilities and status |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_device(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| struct usb_gadget *gadget = &udc->gadget; |
| int n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| n += scnprintf(buf + n, PAGE_SIZE - n, "speed = %d\n", |
| gadget->speed); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n", |
| gadget->max_speed); |
| /* TODO: Scheduled for removal in 3.8. */ |
| n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n", |
| gadget_is_dualspeed(gadget)); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n", |
| gadget->is_otg); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n", |
| gadget->is_a_peripheral); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable = %d\n", |
| gadget->b_hnp_enable); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support = %d\n", |
| gadget->a_hnp_support); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n", |
| gadget->a_alt_hnp_support); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "name = %s\n", |
| (gadget->name ? gadget->name : "")); |
| |
| return n; |
| } |
| static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); |
| |
| /** |
| * show_driver: prints information about attached gadget (if any) |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_driver(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| struct usb_gadget_driver *driver = udc->driver; |
| int n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| if (driver == NULL) |
| return scnprintf(buf, PAGE_SIZE, |
| "There is no gadget attached!\n"); |
| |
| n += scnprintf(buf + n, PAGE_SIZE - n, "function = %s\n", |
| (driver->function ? driver->function : "")); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n", |
| driver->max_speed); |
| |
| return n; |
| } |
| static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL); |
| |
| /* Maximum event message length */ |
| #define DBG_DATA_MSG 64UL |
| |
| /* Maximum event messages */ |
| #define DBG_DATA_MAX 128UL |
| |
| /* Event buffer descriptor */ |
| static struct { |
| char (buf[DBG_DATA_MAX])[DBG_DATA_MSG]; /* buffer */ |
| unsigned idx; /* index */ |
| unsigned tty; /* print to console? */ |
| rwlock_t lck; /* lock */ |
| } dbg_data = { |
| .idx = 0, |
| .tty = 0, |
| .lck = __RW_LOCK_UNLOCKED(lck) |
| }; |
| |
| /** |
| * dbg_dec: decrements debug event index |
| * @idx: buffer index |
| */ |
| static void dbg_dec(unsigned *idx) |
| { |
| *idx = (*idx - 1) & (DBG_DATA_MAX-1); |
| } |
| |
| /** |
| * dbg_inc: increments debug event index |
| * @idx: buffer index |
| */ |
| static void dbg_inc(unsigned *idx) |
| { |
| *idx = (*idx + 1) & (DBG_DATA_MAX-1); |
| } |
| |
| /** |
| * dbg_print: prints the common part of the event |
| * @addr: endpoint address |
| * @name: event name |
| * @status: status |
| * @extra: extra information |
| */ |
| static void dbg_print(u8 addr, const char *name, int status, const char *extra) |
| { |
| struct timeval tval; |
| unsigned int stamp; |
| unsigned long flags; |
| |
| write_lock_irqsave(&dbg_data.lck, flags); |
| |
| do_gettimeofday(&tval); |
| stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */ |
| stamp = stamp * 1000000 + tval.tv_usec; |
| |
| scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG, |
| "%04X\t? %02X %-7.7s %4i ?\t%s\n", |
| stamp, addr, name, status, extra); |
| |
| dbg_inc(&dbg_data.idx); |
| |
| write_unlock_irqrestore(&dbg_data.lck, flags); |
| |
| if (dbg_data.tty != 0) |
| pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n", |
| stamp, addr, name, status, extra); |
| } |
| |
| /** |
| * dbg_done: prints a DONE event |
| * @addr: endpoint address |
| * @td: transfer descriptor |
| * @status: status |
| */ |
| static void dbg_done(u8 addr, const u32 token, int status) |
| { |
| char msg[DBG_DATA_MSG]; |
| |
| scnprintf(msg, sizeof(msg), "%d %02X", |
| (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES), |
| (int)(token & TD_STATUS) >> ffs_nr(TD_STATUS)); |
| dbg_print(addr, "DONE", status, msg); |
| } |
| |
| /** |
| * dbg_event: prints a generic event |
| * @addr: endpoint address |
| * @name: event name |
| * @status: status |
| */ |
| static void dbg_event(u8 addr, const char *name, int status) |
| { |
| if (name != NULL) |
| dbg_print(addr, name, status, ""); |
| } |
| |
| /* |
| * dbg_queue: prints a QUEUE event |
| * @addr: endpoint address |
| * @req: USB request |
| * @status: status |
| */ |
| static void dbg_queue(u8 addr, const struct usb_request *req, int status) |
| { |
| char msg[DBG_DATA_MSG]; |
| |
| if (req != NULL) { |
| scnprintf(msg, sizeof(msg), |
| "%d %d", !req->no_interrupt, req->length); |
| dbg_print(addr, "QUEUE", status, msg); |
| } |
| } |
| |
| /** |
| * dbg_setup: prints a SETUP event |
| * @addr: endpoint address |
| * @req: setup request |
| */ |
| static void dbg_setup(u8 addr, const struct usb_ctrlrequest *req) |
| { |
| char msg[DBG_DATA_MSG]; |
| |
| if (req != NULL) { |
| scnprintf(msg, sizeof(msg), |
| "%02X %02X %04X %04X %d", req->bRequestType, |
| req->bRequest, le16_to_cpu(req->wValue), |
| le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength)); |
| dbg_print(addr, "SETUP", 0, msg); |
| } |
| } |
| |
| /** |
| * show_events: displays the event buffer |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_events(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long flags; |
| unsigned i, j, n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| read_lock_irqsave(&dbg_data.lck, flags); |
| |
| i = dbg_data.idx; |
| for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) { |
| n += strlen(dbg_data.buf[i]); |
| if (n >= PAGE_SIZE) { |
| n -= strlen(dbg_data.buf[i]); |
| break; |
| } |
| } |
| for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i)) |
| j += scnprintf(buf + j, PAGE_SIZE - j, |
| "%s", dbg_data.buf[i]); |
| |
| read_unlock_irqrestore(&dbg_data.lck, flags); |
| |
| return n; |
| } |
| |
| /** |
| * store_events: configure if events are going to be also printed to console |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t store_events(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned tty; |
| |
| dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| goto done; |
| } |
| |
| if (sscanf(buf, "%u", &tty) != 1 || tty > 1) { |
| dev_err(dev, "<1|0>: enable|disable console log\n"); |
| goto done; |
| } |
| |
| dbg_data.tty = tty; |
| dev_info(dev, "tty = %u", dbg_data.tty); |
| |
| done: |
| return count; |
| } |
| static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); |
| |
| /** |
| * show_inters: interrupt status, enable status and historic |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_inters(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| u32 intr; |
| unsigned i, j, n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| "status = %08x\n", hw_read_intr_status()); |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| "enable = %08x\n", hw_read_intr_enable()); |
| |
| n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", |
| isr_statistics.test); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "? ui = %d\n", |
| isr_statistics.ui); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n", |
| isr_statistics.uei); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n", |
| isr_statistics.pci); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n", |
| isr_statistics.uri); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n", |
| isr_statistics.sli); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n", |
| isr_statistics.none); |
| n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n", |
| isr_statistics.hndl.cnt); |
| |
| for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) { |
| i &= ISR_MASK; |
| intr = isr_statistics.hndl.buf[i]; |
| |
| if (USBi_UI & intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "ui "); |
| intr &= ~USBi_UI; |
| if (USBi_UEI & intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "uei "); |
| intr &= ~USBi_UEI; |
| if (USBi_PCI & intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "pci "); |
| intr &= ~USBi_PCI; |
| if (USBi_URI & intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "uri "); |
| intr &= ~USBi_URI; |
| if (USBi_SLI & intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "sli "); |
| intr &= ~USBi_SLI; |
| if (intr) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "??? "); |
| if (isr_statistics.hndl.buf[i]) |
| n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); |
| } |
| |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| return n; |
| } |
| |
| /** |
| * store_inters: enable & force or disable an individual interrutps |
| * (to be used for test purposes only) |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t store_inters(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| unsigned en, bit; |
| |
| dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| goto done; |
| } |
| |
| if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { |
| dev_err(dev, "<1|0> <bit>: enable|disable interrupt"); |
| goto done; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| if (en) { |
| if (hw_intr_force(bit)) |
| dev_err(dev, "invalid bit number\n"); |
| else |
| isr_statistics.test++; |
| } else { |
| if (hw_intr_clear(bit)) |
| dev_err(dev, "invalid bit number\n"); |
| } |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| done: |
| return count; |
| } |
| static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); |
| |
| /** |
| * show_port_test: reads port test mode |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_port_test(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| unsigned mode; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| mode = hw_port_test_get(); |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); |
| } |
| |
| /** |
| * store_port_test: writes port test mode |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t store_port_test(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| unsigned mode; |
| |
| dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| goto done; |
| } |
| |
| if (sscanf(buf, "%u", &mode) != 1) { |
| dev_err(dev, "<mode>: set port test mode"); |
| goto done; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| if (hw_port_test_set(mode)) |
| dev_err(dev, "invalid mode\n"); |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| done: |
| return count; |
| } |
| static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, |
| show_port_test, store_port_test); |
| |
| /** |
| * show_qheads: DMA contents of all queue heads |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| unsigned i, j, n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| for (i = 0; i < hw_ep_max/2; i++) { |
| struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; |
| struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| "EP=%02i: RX=%08X TX=%08X\n", |
| i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); |
| for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| " %04X: %08X %08X\n", j, |
| *((u32 *)mEpRx->qh.ptr + j), |
| *((u32 *)mEpTx->qh.ptr + j)); |
| } |
| } |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| return n; |
| } |
| static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); |
| |
| /** |
| * show_registers: dumps all registers |
| * |
| * Check "device.h" for details |
| */ |
| #define DUMP_ENTRIES 512 |
| static ssize_t show_registers(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| u32 *dump; |
| unsigned i, k, n = 0; |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); |
| if (!dump) { |
| dev_err(dev, "%s: out of memory\n", __func__); |
| return 0; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| k = hw_register_read(dump, DUMP_ENTRIES); |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| for (i = 0; i < k; i++) { |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| "reg[0x%04X] = 0x%08X\n", |
| i * (unsigned)sizeof(u32), dump[i]); |
| } |
| kfree(dump); |
| |
| return n; |
| } |
| |
| /** |
| * store_registers: writes value to register address |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t store_registers(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long addr, data, flags; |
| |
| dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| goto done; |
| } |
| |
| if (sscanf(buf, "%li %li", &addr, &data) != 2) { |
| dev_err(dev, "<addr> <data>: write data to register address"); |
| goto done; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| if (hw_register_write(addr, data)) |
| dev_err(dev, "invalid address range\n"); |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| done: |
| return count; |
| } |
| static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, |
| show_registers, store_registers); |
| |
| /** |
| * show_requests: DMA contents of all requests currently queued (all endpts) |
| * |
| * Check "device.h" for details |
| */ |
| static ssize_t show_requests(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| unsigned long flags; |
| struct list_head *ptr = NULL; |
| struct ci13xxx_req *req = NULL; |
| unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); |
| |
| dbg_trace("[%s] %p\n", __func__, buf); |
| if (attr == NULL || buf == NULL) { |
| dev_err(dev, "[%s] EINVAL\n", __func__); |
| return 0; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| for (i = 0; i < hw_ep_max; i++) |
| list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) |
| { |
| req = list_entry(ptr, struct ci13xxx_req, queue); |
| |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| "EP=%02i: TD=%08X %s\n", |
| i % hw_ep_max/2, (u32)req->dma, |
| ((i < hw_ep_max/2) ? "RX" : "TX")); |
| |
| for (j = 0; j < qSize; j++) |
| n += scnprintf(buf + n, PAGE_SIZE - n, |
| " %04X: %08X\n", j, |
| *((u32 *)req->ptr + j)); |
| } |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| return n; |
| } |
| static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL); |
| |
| /** |
| * dbg_create_files: initializes the attribute interface |
| * @dev: device |
| * |
| * This function returns an error code |
| */ |
| __maybe_unused static int dbg_create_files(struct device *dev) |
| { |
| int retval = 0; |
| |
| if (dev == NULL) |
| return -EINVAL; |
| retval = device_create_file(dev, &dev_attr_device); |
| if (retval) |
| goto done; |
| retval = device_create_file(dev, &dev_attr_driver); |
| if (retval) |
| goto rm_device; |
| retval = device_create_file(dev, &dev_attr_events); |
| if (retval) |
| goto rm_driver; |
| retval = device_create_file(dev, &dev_attr_inters); |
| if (retval) |
| goto rm_events; |
| retval = device_create_file(dev, &dev_attr_port_test); |
| if (retval) |
| goto rm_inters; |
| retval = device_create_file(dev, &dev_attr_qheads); |
| if (retval) |
| goto rm_port_test; |
| retval = device_create_file(dev, &dev_attr_registers); |
| if (retval) |
| goto rm_qheads; |
| retval = device_create_file(dev, &dev_attr_requests); |
| if (retval) |
| goto rm_registers; |
| return 0; |
| |
| rm_registers: |
| device_remove_file(dev, &dev_attr_registers); |
| rm_qheads: |
| device_remove_file(dev, &dev_attr_qheads); |
| rm_port_test: |
| device_remove_file(dev, &dev_attr_port_test); |
| rm_inters: |
| device_remove_file(dev, &dev_attr_inters); |
| rm_events: |
| device_remove_file(dev, &dev_attr_events); |
| rm_driver: |
| device_remove_file(dev, &dev_attr_driver); |
| rm_device: |
| device_remove_file(dev, &dev_attr_device); |
| done: |
| return retval; |
| } |
| |
| /** |
| * dbg_remove_files: destroys the attribute interface |
| * @dev: device |
| * |
| * This function returns an error code |
| */ |
| __maybe_unused static int dbg_remove_files(struct device *dev) |
| { |
| if (dev == NULL) |
| return -EINVAL; |
| device_remove_file(dev, &dev_attr_requests); |
| device_remove_file(dev, &dev_attr_registers); |
| device_remove_file(dev, &dev_attr_qheads); |
| device_remove_file(dev, &dev_attr_port_test); |
| device_remove_file(dev, &dev_attr_inters); |
| device_remove_file(dev, &dev_attr_events); |
| device_remove_file(dev, &dev_attr_driver); |
| device_remove_file(dev, &dev_attr_device); |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * UTIL block |
| *****************************************************************************/ |
| /** |
| * _usb_addr: calculates endpoint address from direction & number |
| * @ep: endpoint |
| */ |
| static inline u8 _usb_addr(struct ci13xxx_ep *ep) |
| { |
| return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; |
| } |
| |
| /** |
| * _hardware_queue: configures a request at hardware level |
| * @gadget: gadget |
| * @mEp: endpoint |
| * |
| * This function returns an error code |
| */ |
| static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) |
| { |
| unsigned i; |
| int ret = 0; |
| unsigned length = mReq->req.length; |
| |
| trace("%p, %p", mEp, mReq); |
| |
| /* don't queue twice */ |
| if (mReq->req.status == -EALREADY) |
| return -EALREADY; |
| |
| mReq->req.status = -EALREADY; |
| if (length && mReq->req.dma == DMA_ADDR_INVALID) { |
| mReq->req.dma = \ |
| dma_map_single(mEp->device, mReq->req.buf, |
| length, mEp->dir ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| if (mReq->req.dma == 0) |
| return -ENOMEM; |
| |
| mReq->map = 1; |
| } |
| |
| if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) { |
| mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC, |
| &mReq->zdma); |
| if (mReq->zptr == NULL) { |
| if (mReq->map) { |
| dma_unmap_single(mEp->device, mReq->req.dma, |
| length, mEp->dir ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| mReq->req.dma = DMA_ADDR_INVALID; |
| mReq->map = 0; |
| } |
| return -ENOMEM; |
| } |
| memset(mReq->zptr, 0, sizeof(*mReq->zptr)); |
| mReq->zptr->next = TD_TERMINATE; |
| mReq->zptr->token = TD_STATUS_ACTIVE; |
| if (!mReq->req.no_interrupt) |
| mReq->zptr->token |= TD_IOC; |
| } |
| /* |
| * TD configuration |
| * TODO - handle requests which spawns into several TDs |
| */ |
| memset(mReq->ptr, 0, sizeof(*mReq->ptr)); |
| mReq->ptr->token = length << ffs_nr(TD_TOTAL_BYTES); |
| mReq->ptr->token &= TD_TOTAL_BYTES; |
| mReq->ptr->token |= TD_STATUS_ACTIVE; |
| if (mReq->zptr) { |
| mReq->ptr->next = mReq->zdma; |
| } else { |
| mReq->ptr->next = TD_TERMINATE; |
| if (!mReq->req.no_interrupt) |
| mReq->ptr->token |= TD_IOC; |
| } |
| mReq->ptr->page[0] = mReq->req.dma; |
| for (i = 1; i < 5; i++) |
| mReq->ptr->page[i] = |
| (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; |
| |
| if (!list_empty(&mEp->qh.queue)) { |
| struct ci13xxx_req *mReqPrev; |
| int n = hw_ep_bit(mEp->num, mEp->dir); |
| int tmp_stat; |
| |
| mReqPrev = list_entry(mEp->qh.queue.prev, |
| struct ci13xxx_req, queue); |
| if (mReqPrev->zptr) |
| mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK; |
| else |
| mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; |
| wmb(); |
| if (hw_cread(CAP_ENDPTPRIME, BIT(n))) |
| goto done; |
| do { |
| hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); |
| tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n)); |
| } while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW)); |
| hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0); |
| if (tmp_stat) |
| goto done; |
| } |
| |
| /* QH configuration */ |
| mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ |
| mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ |
| mEp->qh.ptr->cap |= QH_ZLT; |
| |
| wmb(); /* synchronize before ep prime */ |
| |
| ret = hw_ep_prime(mEp->num, mEp->dir, |
| mEp->type == USB_ENDPOINT_XFER_CONTROL); |
| done: |
| return ret; |
| } |
| |
| /** |
| * _hardware_dequeue: handles a request at hardware level |
| * @gadget: gadget |
| * @mEp: endpoint |
| * |
| * This function returns an error code |
| */ |
| static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) |
| { |
| trace("%p, %p", mEp, mReq); |
| |
| if (mReq->req.status != -EALREADY) |
| return -EINVAL; |
| |
| if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0) |
| return -EBUSY; |
| |
| if (mReq->zptr) { |
| if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0) |
| return -EBUSY; |
| dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); |
| mReq->zptr = NULL; |
| } |
| |
| mReq->req.status = 0; |
| |
| if (mReq->map) { |
| dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, |
| mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| mReq->req.dma = DMA_ADDR_INVALID; |
| mReq->map = 0; |
| } |
| |
| mReq->req.status = mReq->ptr->token & TD_STATUS; |
| if ((TD_STATUS_HALTED & mReq->req.status) != 0) |
| mReq->req.status = -1; |
| else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) |
| mReq->req.status = -1; |
| else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0) |
| mReq->req.status = -1; |
| |
| mReq->req.actual = mReq->ptr->token & TD_TOTAL_BYTES; |
| mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES); |
| mReq->req.actual = mReq->req.length - mReq->req.actual; |
| mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual; |
| |
| return mReq->req.actual; |
| } |
| |
| /** |
| * _ep_nuke: dequeues all endpoint requests |
| * @mEp: endpoint |
| * |
| * This function returns an error code |
| * Caller must hold lock |
| */ |
| static int _ep_nuke(struct ci13xxx_ep *mEp) |
| __releases(mEp->lock) |
| __acquires(mEp->lock) |
| { |
| trace("%p", mEp); |
| |
| if (mEp == NULL) |
| return -EINVAL; |
| |
| hw_ep_flush(mEp->num, mEp->dir); |
| |
| while (!list_empty(&mEp->qh.queue)) { |
| |
| /* pop oldest request */ |
| struct ci13xxx_req *mReq = \ |
| list_entry(mEp->qh.queue.next, |
| struct ci13xxx_req, queue); |
| list_del_init(&mReq->queue); |
| mReq->req.status = -ESHUTDOWN; |
| |
| if (mReq->req.complete != NULL) { |
| spin_unlock(mEp->lock); |
| mReq->req.complete(&mEp->ep, &mReq->req); |
| spin_lock(mEp->lock); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts |
| * @gadget: gadget |
| * |
| * This function returns an error code |
| */ |
| static int _gadget_stop_activity(struct usb_gadget *gadget) |
| { |
| struct usb_ep *ep; |
| struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); |
| unsigned long flags; |
| |
| trace("%p", gadget); |
| |
| if (gadget == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(udc->lock, flags); |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| udc->remote_wakeup = 0; |
| udc->suspended = 0; |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| /* flush all endpoints */ |
| gadget_for_each_ep(ep, gadget) { |
| usb_ep_fifo_flush(ep); |
| } |
| usb_ep_fifo_flush(&udc->ep0out.ep); |
| usb_ep_fifo_flush(&udc->ep0in.ep); |
| |
| udc->driver->disconnect(gadget); |
| |
| /* make sure to disable all endpoints */ |
| gadget_for_each_ep(ep, gadget) { |
| usb_ep_disable(ep); |
| } |
| |
| if (udc->status != NULL) { |
| usb_ep_free_request(&udc->ep0in.ep, udc->status); |
| udc->status = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * ISR block |
| *****************************************************************************/ |
| /** |
| * isr_reset_handler: USB reset interrupt handler |
| * @udc: UDC device |
| * |
| * This function resets USB engine after a bus reset occurred |
| */ |
| static void isr_reset_handler(struct ci13xxx *udc) |
| __releases(udc->lock) |
| __acquires(udc->lock) |
| { |
| int retval; |
| |
| trace("%p", udc); |
| |
| if (udc == NULL) { |
| err("EINVAL"); |
| return; |
| } |
| |
| dbg_event(0xFF, "BUS RST", 0); |
| |
| spin_unlock(udc->lock); |
| retval = _gadget_stop_activity(&udc->gadget); |
| if (retval) |
| goto done; |
| |
| retval = hw_usb_reset(); |
| if (retval) |
| goto done; |
| |
| udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); |
| if (udc->status == NULL) |
| retval = -ENOMEM; |
| |
| spin_lock(udc->lock); |
| |
| done: |
| if (retval) |
| err("error: %i", retval); |
| } |
| |
| /** |
| * isr_get_status_complete: get_status request complete function |
| * @ep: endpoint |
| * @req: request handled |
| * |
| * Caller must release lock |
| */ |
| static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| trace("%p, %p", ep, req); |
| |
| if (ep == NULL || req == NULL) { |
| err("EINVAL"); |
| return; |
| } |
| |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| } |
| |
| /** |
| * isr_get_status_response: get_status request response |
| * @udc: udc struct |
| * @setup: setup request packet |
| * |
| * This function returns an error code |
| */ |
| static int isr_get_status_response(struct ci13xxx *udc, |
| struct usb_ctrlrequest *setup) |
| __releases(mEp->lock) |
| __acquires(mEp->lock) |
| { |
| struct ci13xxx_ep *mEp = &udc->ep0in; |
| struct usb_request *req = NULL; |
| gfp_t gfp_flags = GFP_ATOMIC; |
| int dir, num, retval; |
| |
| trace("%p, %p", mEp, setup); |
| |
| if (mEp == NULL || setup == NULL) |
| return -EINVAL; |
| |
| spin_unlock(mEp->lock); |
| req = usb_ep_alloc_request(&mEp->ep, gfp_flags); |
| spin_lock(mEp->lock); |
| if (req == NULL) |
| return -ENOMEM; |
| |
| req->complete = isr_get_status_complete; |
| req->length = 2; |
| req->buf = kzalloc(req->length, gfp_flags); |
| if (req->buf == NULL) { |
| retval = -ENOMEM; |
| goto err_free_req; |
| } |
| |
| if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { |
| /* Assume that device is bus powered for now. */ |
| *((u16 *)req->buf) = _udc->remote_wakeup << 1; |
| retval = 0; |
| } else if ((setup->bRequestType & USB_RECIP_MASK) \ |
| == USB_RECIP_ENDPOINT) { |
| dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? |
| TX : RX; |
| num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; |
| *((u16 *)req->buf) = hw_ep_get_halt(num, dir); |
| } |
| /* else do nothing; reserved for future use */ |
| |
| spin_unlock(mEp->lock); |
| retval = usb_ep_queue(&mEp->ep, req, gfp_flags); |
| spin_lock(mEp->lock); |
| if (retval) |
| goto err_free_buf; |
| |
| return 0; |
| |
| err_free_buf: |
| kfree(req->buf); |
| err_free_req: |
| spin_unlock(mEp->lock); |
| usb_ep_free_request(&mEp->ep, req); |
| spin_lock(mEp->lock); |
| return retval; |
| } |
| |
| /** |
| * isr_setup_status_complete: setup_status request complete function |
| * @ep: endpoint |
| * @req: request handled |
| * |
| * Caller must release lock. Put the port in test mode if test mode |
| * feature is selected. |
| */ |
| static void |
| isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci13xxx *udc = req->context; |
| unsigned long flags; |
| |
| trace("%p, %p", ep, req); |
| |
| spin_lock_irqsave(udc->lock, flags); |
| if (udc->test_mode) |
| hw_port_test_set(udc->test_mode); |
| spin_unlock_irqrestore(udc->lock, flags); |
| } |
| |
| /** |
| * isr_setup_status_phase: queues the status phase of a setup transation |
| * @udc: udc struct |
| * |
| * This function returns an error code |
| */ |
| static int isr_setup_status_phase(struct ci13xxx *udc) |
| __releases(mEp->lock) |
| __acquires(mEp->lock) |
| { |
| int retval; |
| struct ci13xxx_ep *mEp; |
| |
| trace("%p", udc); |
| |
| mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; |
| udc->status->context = udc; |
| udc->status->complete = isr_setup_status_complete; |
| |
| spin_unlock(mEp->lock); |
| retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); |
| spin_lock(mEp->lock); |
| |
| return retval; |
| } |
| |
| /** |
| * isr_tr_complete_low: transaction complete low level handler |
| * @mEp: endpoint |
| * |
| * This function returns an error code |
| * Caller must hold lock |
| */ |
| static int isr_tr_complete_low(struct ci13xxx_ep *mEp) |
| __releases(mEp->lock) |
| __acquires(mEp->lock) |
| { |
| struct ci13xxx_req *mReq, *mReqTemp; |
| struct ci13xxx_ep *mEpTemp = mEp; |
| int uninitialized_var(retval); |
| |
| trace("%p", mEp); |
| |
| if (list_empty(&mEp->qh.queue)) |
| return -EINVAL; |
| |
| list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, |
| queue) { |
| retval = _hardware_dequeue(mEp, mReq); |
| if (retval < 0) |
| break; |
| list_del_init(&mReq->queue); |
| dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); |
| if (mReq->req.complete != NULL) { |
| spin_unlock(mEp->lock); |
| if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && |
| mReq->req.length) |
| mEpTemp = &_udc->ep0in; |
| mReq->req.complete(&mEpTemp->ep, &mReq->req); |
| spin_lock(mEp->lock); |
| } |
| } |
| |
| if (retval == -EBUSY) |
| retval = 0; |
| if (retval < 0) |
| dbg_event(_usb_addr(mEp), "DONE", retval); |
| |
| return retval; |
| } |
| |
| /** |
| * isr_tr_complete_handler: transaction complete interrupt handler |
| * @udc: UDC descriptor |
| * |
| * This function handles traffic events |
| */ |
| static void isr_tr_complete_handler(struct ci13xxx *udc) |
| __releases(udc->lock) |
| __acquires(udc->lock) |
| { |
| unsigned i; |
| u8 tmode = 0; |
| |
| trace("%p", udc); |
| |
| if (udc == NULL) { |
| err("EINVAL"); |
| return; |
| } |
| |
| for (i = 0; i < hw_ep_max; i++) { |
| struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| int type, num, dir, err = -EINVAL; |
| struct usb_ctrlrequest req; |
| |
| if (mEp->desc == NULL) |
| continue; /* not configured */ |
| |
| if (hw_test_and_clear_complete(i)) { |
| err = isr_tr_complete_low(mEp); |
| if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { |
| if (err > 0) /* needs status phase */ |
| err = isr_setup_status_phase(udc); |
| if (err < 0) { |
| dbg_event(_usb_addr(mEp), |
| "ERROR", err); |
| spin_unlock(udc->lock); |
| if (usb_ep_set_halt(&mEp->ep)) |
| err("error: ep_set_halt"); |
| spin_lock(udc->lock); |
| } |
| } |
| } |
| |
| if (mEp->type != USB_ENDPOINT_XFER_CONTROL || |
| !hw_test_and_clear_setup_status(i)) |
| continue; |
| |
| if (i != 0) { |
| warn("ctrl traffic received at endpoint"); |
| continue; |
| } |
| |
| /* |
| * Flush data and handshake transactions of previous |
| * setup packet. |
| */ |
| _ep_nuke(&udc->ep0out); |
| _ep_nuke(&udc->ep0in); |
| |
| /* read_setup_packet */ |
| do { |
| hw_test_and_set_setup_guard(); |
| memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); |
| } while (!hw_test_and_clear_setup_guard()); |
| |
| type = req.bRequestType; |
| |
| udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; |
| |
| dbg_setup(_usb_addr(mEp), &req); |
| |
| switch (req.bRequest) { |
| case USB_REQ_CLEAR_FEATURE: |
| if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| le16_to_cpu(req.wValue) == |
| USB_ENDPOINT_HALT) { |
| if (req.wLength != 0) |
| break; |
| num = le16_to_cpu(req.wIndex); |
| dir = num & USB_ENDPOINT_DIR_MASK; |
| num &= USB_ENDPOINT_NUMBER_MASK; |
| if (dir) /* TX */ |
| num += hw_ep_max/2; |
| if (!udc->ci13xxx_ep[num].wedge) { |
| spin_unlock(udc->lock); |
| err = usb_ep_clear_halt( |
| &udc->ci13xxx_ep[num].ep); |
| spin_lock(udc->lock); |
| if (err) |
| break; |
| } |
| err = isr_setup_status_phase(udc); |
| } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && |
| le16_to_cpu(req.wValue) == |
| USB_DEVICE_REMOTE_WAKEUP) { |
| if (req.wLength != 0) |
| break; |
| udc->remote_wakeup = 0; |
| err = isr_setup_status_phase(udc); |
| } else { |
| goto delegate; |
| } |
| break; |
| case USB_REQ_GET_STATUS: |
| if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && |
| type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && |
| type != (USB_DIR_IN|USB_RECIP_INTERFACE)) |
| goto delegate; |
| if (le16_to_cpu(req.wLength) != 2 || |
| le16_to_cpu(req.wValue) != 0) |
| break; |
| err = isr_get_status_response(udc, &req); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) |
| goto delegate; |
| if (le16_to_cpu(req.wLength) != 0 || |
| le16_to_cpu(req.wIndex) != 0) |
| break; |
| err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); |
| if (err) |
| break; |
| err = isr_setup_status_phase(udc); |
| break; |
| case USB_REQ_SET_FEATURE: |
| if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| le16_to_cpu(req.wValue) == |
| USB_ENDPOINT_HALT) { |
| if (req.wLength != 0) |
| break; |
| num = le16_to_cpu(req.wIndex); |
| dir = num & USB_ENDPOINT_DIR_MASK; |
| num &= USB_ENDPOINT_NUMBER_MASK; |
| if (dir) /* TX */ |
| num += hw_ep_max/2; |
| |
| spin_unlock(udc->lock); |
| err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); |
| spin_lock(udc->lock); |
| if (!err) |
| isr_setup_status_phase(udc); |
| } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { |
| if (req.wLength != 0) |
| break; |
| switch (le16_to_cpu(req.wValue)) { |
| case USB_DEVICE_REMOTE_WAKEUP: |
| udc->remote_wakeup = 1; |
| err = isr_setup_status_phase(udc); |
| break; |
| case USB_DEVICE_TEST_MODE: |
| tmode = le16_to_cpu(req.wIndex) >> 8; |
| switch (tmode) { |
| case TEST_J: |
| case TEST_K: |
| case TEST_SE0_NAK: |
| case TEST_PACKET: |
| case TEST_FORCE_EN: |
| udc->test_mode = tmode; |
| err = isr_setup_status_phase( |
| udc); |
| break; |
| default: |
| break; |
| } |
| default: |
| goto delegate; |
| } |
| } else { |
| goto delegate; |
| } |
| break; |
| default: |
| delegate: |
| if (req.wLength == 0) /* no data phase */ |
| udc->ep0_dir = TX; |
| |
| spin_unlock(udc->lock); |
| err = udc->driver->setup(&udc->gadget, &req); |
| spin_lock(udc->lock); |
| break; |
| } |
| |
| if (err < 0) { |
| dbg_event(_usb_addr(mEp), "ERROR", err); |
| |
| spin_unlock(udc->lock); |
| if (usb_ep_set_halt(&mEp->ep)) |
| err("error: ep_set_halt"); |
| spin_lock(udc->lock); |
| } |
| } |
| } |
| |
| /****************************************************************************** |
| * ENDPT block |
| *****************************************************************************/ |
| /** |
| * ep_enable: configure endpoint, making it usable |
| * |
| * Check usb_ep_enable() at "usb_gadget.h" for details |
| */ |
| static int ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| int retval = 0; |
| unsigned long flags; |
| |
| trace("%p, %p", ep, desc); |
| |
| if (ep == NULL || desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| /* only internal SW should enable ctrl endpts */ |
| |
| mEp->desc = desc; |
| |
| if (!list_empty(&mEp->qh.queue)) |
| warn("enabling a non-empty endpoint!"); |
| |
| mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; |
| mEp->num = usb_endpoint_num(desc); |
| mEp->type = usb_endpoint_type(desc); |
| |
| mEp->ep.maxpacket = usb_endpoint_maxp(desc); |
| |
| dbg_event(_usb_addr(mEp), "ENABLE", 0); |
| |
| mEp->qh.ptr->cap = 0; |
| |
| if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| mEp->qh.ptr->cap |= QH_IOS; |
| else if (mEp->type == USB_ENDPOINT_XFER_ISOC) |
| mEp->qh.ptr->cap &= ~QH_MULT; |
| else |
| mEp->qh.ptr->cap &= ~QH_ZLT; |
| |
| mEp->qh.ptr->cap |= |
| (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; |
| mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ |
| |
| /* |
| * Enable endpoints in the HW other than ep0 as ep0 |
| * is always enabled |
| */ |
| if (mEp->num) |
| retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_disable: endpoint is no longer usable |
| * |
| * Check usb_ep_disable() at "usb_gadget.h" for details |
| */ |
| static int ep_disable(struct usb_ep *ep) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| int direction, retval = 0; |
| unsigned long flags; |
| |
| trace("%p", ep); |
| |
| if (ep == NULL) |
| return -EINVAL; |
| else if (mEp->desc == NULL) |
| return -EBUSY; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| /* only internal SW should disable ctrl endpts */ |
| |
| direction = mEp->dir; |
| do { |
| dbg_event(_usb_addr(mEp), "DISABLE", 0); |
| |
| retval |= _ep_nuke(mEp); |
| retval |= hw_ep_disable(mEp->num, mEp->dir); |
| |
| if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| mEp->dir = (mEp->dir == TX) ? RX : TX; |
| |
| } while (mEp->dir != direction); |
| |
| mEp->desc = NULL; |
| mEp->ep.desc = NULL; |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_alloc_request: allocate a request object to use with this endpoint |
| * |
| * Check usb_ep_alloc_request() at "usb_gadget.h" for details |
| */ |
| static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| struct ci13xxx_req *mReq = NULL; |
| |
| trace("%p, %i", ep, gfp_flags); |
| |
| if (ep == NULL) { |
| err("EINVAL"); |
| return NULL; |
| } |
| |
| mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); |
| if (mReq != NULL) { |
| INIT_LIST_HEAD(&mReq->queue); |
| mReq->req.dma = DMA_ADDR_INVALID; |
| |
| mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, |
| &mReq->dma); |
| if (mReq->ptr == NULL) { |
| kfree(mReq); |
| mReq = NULL; |
| } |
| } |
| |
| dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL); |
| |
| return (mReq == NULL) ? NULL : &mReq->req; |
| } |
| |
| /** |
| * ep_free_request: frees a request object |
| * |
| * Check usb_ep_free_request() at "usb_gadget.h" for details |
| */ |
| static void ep_free_request(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| unsigned long flags; |
| |
| trace("%p, %p", ep, req); |
| |
| if (ep == NULL || req == NULL) { |
| err("EINVAL"); |
| return; |
| } else if (!list_empty(&mReq->queue)) { |
| err("EBUSY"); |
| return; |
| } |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| if (mReq->ptr) |
| dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma); |
| kfree(mReq); |
| |
| dbg_event(_usb_addr(mEp), "FREE", 0); |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| } |
| |
| /** |
| * ep_queue: queues (submits) an I/O request to an endpoint |
| * |
| * Check usb_ep_queue()* at usb_gadget.h" for details |
| */ |
| static int ep_queue(struct usb_ep *ep, struct usb_request *req, |
| gfp_t __maybe_unused gfp_flags) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| int retval = 0; |
| unsigned long flags; |
| |
| trace("%p, %p, %X", ep, req, gfp_flags); |
| |
| if (ep == NULL || req == NULL || mEp->desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { |
| if (req->length) |
| mEp = (_udc->ep0_dir == RX) ? |
| &_udc->ep0out : &_udc->ep0in; |
| if (!list_empty(&mEp->qh.queue)) { |
| _ep_nuke(mEp); |
| retval = -EOVERFLOW; |
| warn("endpoint ctrl %X nuked", _usb_addr(mEp)); |
| } |
| } |
| |
| /* first nuke then test link, e.g. previous status has not sent */ |
| if (!list_empty(&mReq->queue)) { |
| retval = -EBUSY; |
| err("request already in queue"); |
| goto done; |
| } |
| |
| if (req->length > (4 * CI13XXX_PAGE_SIZE)) { |
| req->length = (4 * CI13XXX_PAGE_SIZE); |
| retval = -EMSGSIZE; |
| warn("request length truncated"); |
| } |
| |
| dbg_queue(_usb_addr(mEp), req, retval); |
| |
| /* push request */ |
| mReq->req.status = -EINPROGRESS; |
| mReq->req.actual = 0; |
| |
| retval = _hardware_enqueue(mEp, mReq); |
| |
| if (retval == -EALREADY) { |
| dbg_event(_usb_addr(mEp), "QUEUE", retval); |
| retval = 0; |
| } |
| if (!retval) |
| list_add_tail(&mReq->queue, &mEp->qh.queue); |
| |
| done: |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint |
| * |
| * Check usb_ep_dequeue() at "usb_gadget.h" for details |
| */ |
| static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| unsigned long flags; |
| |
| trace("%p, %p", ep, req); |
| |
| if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || |
| mEp->desc == NULL || list_empty(&mReq->queue) || |
| list_empty(&mEp->qh.queue)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| dbg_event(_usb_addr(mEp), "DEQUEUE", 0); |
| |
| hw_ep_flush(mEp->num, mEp->dir); |
| |
| /* pop request */ |
| list_del_init(&mReq->queue); |
| if (mReq->map) { |
| dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, |
| mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| mReq->req.dma = DMA_ADDR_INVALID; |
| mReq->map = 0; |
| } |
| req->status = -ECONNRESET; |
| |
| if (mReq->req.complete != NULL) { |
| spin_unlock(mEp->lock); |
| mReq->req.complete(&mEp->ep, &mReq->req); |
| spin_lock(mEp->lock); |
| } |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return 0; |
| } |
| |
| /** |
| * ep_set_halt: sets the endpoint halt feature |
| * |
| * Check usb_ep_set_halt() at "usb_gadget.h" for details |
| */ |
| static int ep_set_halt(struct usb_ep *ep, int value) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| int direction, retval = 0; |
| unsigned long flags; |
| |
| trace("%p, %i", ep, value); |
| |
| if (ep == NULL || mEp->desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| #ifndef STALL_IN |
| /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ |
| if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && |
| !list_empty(&mEp->qh.queue)) { |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return -EAGAIN; |
| } |
| #endif |
| |
| direction = mEp->dir; |
| do { |
| dbg_event(_usb_addr(mEp), "HALT", value); |
| retval |= hw_ep_set_halt(mEp->num, mEp->dir, value); |
| |
| if (!value) |
| mEp->wedge = 0; |
| |
| if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| mEp->dir = (mEp->dir == TX) ? RX : TX; |
| |
| } while (mEp->dir != direction); |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ep_set_wedge: sets the halt feature and ignores clear requests |
| * |
| * Check usb_ep_set_wedge() at "usb_gadget.h" for details |
| */ |
| static int ep_set_wedge(struct usb_ep *ep) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| unsigned long flags; |
| |
| trace("%p", ep); |
| |
| if (ep == NULL || mEp->desc == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| dbg_event(_usb_addr(mEp), "WEDGE", 0); |
| mEp->wedge = 1; |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| |
| return usb_ep_set_halt(ep); |
| } |
| |
| /** |
| * ep_fifo_flush: flushes contents of a fifo |
| * |
| * Check usb_ep_fifo_flush() at "usb_gadget.h" for details |
| */ |
| static void ep_fifo_flush(struct usb_ep *ep) |
| { |
| struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| unsigned long flags; |
| |
| trace("%p", ep); |
| |
| if (ep == NULL) { |
| err("%02X: -EINVAL", _usb_addr(mEp)); |
| return; |
| } |
| |
| spin_lock_irqsave(mEp->lock, flags); |
| |
| dbg_event(_usb_addr(mEp), "FFLUSH", 0); |
| hw_ep_flush(mEp->num, mEp->dir); |
| |
| spin_unlock_irqrestore(mEp->lock, flags); |
| } |
| |
| /** |
| * Endpoint-specific part of the API to the USB controller hardware |
| * Check "usb_gadget.h" for details |
| */ |
| static const struct usb_ep_ops usb_ep_ops = { |
| .enable = ep_enable, |
| .disable = ep_disable, |
| .alloc_request = ep_alloc_request, |
| .free_request = ep_free_request, |
| .queue = ep_queue, |
| .dequeue = ep_dequeue, |
| .set_halt = ep_set_halt, |
| .set_wedge = ep_set_wedge, |
| .fifo_flush = ep_fifo_flush, |
| }; |
| |
| /****************************************************************************** |
| * GADGET block |
| *****************************************************************************/ |
| static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) |
| { |
| struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); |
| unsigned long flags; |
| int gadget_ready = 0; |
| |
| if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS)) |
| return -EOPNOTSUPP; |
| |
| spin_lock_irqsave(udc->lock, flags); |
| udc->vbus_active = is_active; |
| if (udc->driver) |
| gadget_ready = 1; |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| if (gadget_ready) { |
| if (is_active) { |
| pm_runtime_get_sync(&_gadget->dev); |
| hw_device_reset(udc); |
| hw_device_state(udc->ep0out.qh.dma); |
| } else { |
| hw_device_state(0); |
| if (udc->udc_driver->notify_event) |
| udc->udc_driver->notify_event(udc, |
| CI13XXX_CONTROLLER_STOPPED_EVENT); |
| _gadget_stop_activity(&udc->gadget); |
| pm_runtime_put_sync(&_gadget->dev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ci13xxx_wakeup(struct usb_gadget *_gadget) |
| { |
| struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); |
| unsigned long flags; |
| int ret = 0; |
| |
| trace(); |
| |
| spin_lock_irqsave(udc->lock, flags); |
| if (!udc->remote_wakeup) { |
| ret = -EOPNOTSUPP; |
| trace("remote wakeup feature is not enabled\n"); |
| goto out; |
| } |
| if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { |
| ret = -EINVAL; |
| trace("port is not suspended\n"); |
| goto out; |
| } |
| hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); |
| out: |
| spin_unlock_irqrestore(udc->lock, flags); |
| return ret; |
| } |
| |
| static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) |
| { |
| struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); |
| |
| if (udc->transceiver) |
| return usb_phy_set_power(udc->transceiver, mA); |
| return -ENOTSUPP; |
| } |
| |
| static int ci13xxx_start(struct usb_gadget_driver *driver, |
| int (*bind)(struct usb_gadget *)); |
| static int ci13xxx_stop(struct usb_gadget_driver *driver); |
| /** |
| * Device operations part of the API to the USB controller hardware, |
| * which don't involve endpoints (or i/o) |
| * Check "usb_gadget.h" for details |
| */ |
| static const struct usb_gadget_ops usb_gadget_ops = { |
| .vbus_session = ci13xxx_vbus_session, |
| .wakeup = ci13xxx_wakeup, |
| .vbus_draw = ci13xxx_vbus_draw, |
| .start = ci13xxx_start, |
| .stop = ci13xxx_stop, |
| }; |
| |
| /** |
| * ci13xxx_start: register a gadget driver |
| * @driver: the driver being registered |
| * @bind: the driver's bind callback |
| * |
| * Check ci13xxx_start() at <linux/usb/gadget.h> for details. |
| * Interrupts are enabled here. |
| */ |
| static int ci13xxx_start(struct usb_gadget_driver *driver, |
| int (*bind)(struct usb_gadget *)) |
| { |
| struct ci13xxx *udc = _udc; |
| unsigned long flags; |
| int i, j; |
| int retval = -ENOMEM; |
| |
| trace("%p", driver); |
| |
| if (driver == NULL || |
| bind == NULL || |
| driver->setup == NULL || |
| driver->disconnect == NULL) |
| return -EINVAL; |
| else if (udc == NULL) |
| return -ENODEV; |
| else if (udc->driver != NULL) |
| return -EBUSY; |
| |
| /* alloc resources */ |
| udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev, |
| sizeof(struct ci13xxx_qh), |
| 64, CI13XXX_PAGE_SIZE); |
| if (udc->qh_pool == NULL) |
| return -ENOMEM; |
| |
| udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev, |
| sizeof(struct ci13xxx_td), |
| 64, CI13XXX_PAGE_SIZE); |
| if (udc->td_pool == NULL) { |
| dma_pool_destroy(udc->qh_pool); |
| udc->qh_pool = NULL; |
| return -ENOMEM; |
| } |
| |
| spin_lock_irqsave(udc->lock, flags); |
| |
| info("hw_ep_max = %d", hw_ep_max); |
| |
| udc->gadget.dev.driver = NULL; |
| |
| retval = 0; |
| for (i = 0; i < hw_ep_max/2; i++) { |
| for (j = RX; j <= TX; j++) { |
| int k = i + j * hw_ep_max/2; |
| struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; |
| |
| scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, |
| (j == TX) ? "in" : "out"); |
| |
| mEp->lock = udc->lock; |
| mEp->device = &udc->gadget.dev; |
| mEp->td_pool = udc->td_pool; |
| |
| mEp->ep.name = mEp->name; |
| mEp->ep.ops = &usb_ep_ops; |
| mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; |
| |
| INIT_LIST_HEAD(&mEp->qh.queue); |
| spin_unlock_irqrestore(udc->lock, flags); |
| mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, |
| &mEp->qh.dma); |
| spin_lock_irqsave(udc->lock, flags); |
| if (mEp->qh.ptr == NULL) |
| retval = -ENOMEM; |
| else |
| memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); |
| |
| /* skip ep0 out and in endpoints */ |
| if (i == 0) |
| continue; |
| |
| list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); |
| } |
| } |
| if (retval) |
| goto done; |
| spin_unlock_irqrestore(udc->lock, flags); |
| udc->ep0out.ep.desc = &ctrl_endpt_out_desc; |
| retval = usb_ep_enable(&udc->ep0out.ep); |
| if (retval) |
| return retval; |
| |
| udc->ep0in.ep.desc = &ctrl_endpt_in_desc; |
| retval = usb_ep_enable(&udc->ep0in.ep); |
| if (retval) |
| return retval; |
| spin_lock_irqsave(udc->lock, flags); |
| |
| udc->gadget.ep0 = &udc->ep0in.ep; |
| /* bind gadget */ |
| driver->driver.bus = NULL; |
| udc->gadget.dev.driver = &driver->driver; |
| |
| spin_unlock_irqrestore(udc->lock, flags); |
| retval = bind(&udc->gadget); /* MAY SLEEP */ |
| spin_lock_irqsave(udc->lock, flags); |
| |
| if (retval) { |
| udc->gadget.dev.driver = NULL; |
| goto done; |
| } |
| |
| udc->driver = driver; |
| pm_runtime_get_sync(&udc->gadget.dev); |
| if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { |
| if (udc->vbus_active) { |
| if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) |
| hw_device_reset(udc); |
| } else { |
| pm_runtime_put_sync(&udc->gadget.dev); |
| goto done; |
| } |
| } |
| |
| retval = hw_device_state(udc->ep0out.qh.dma); |
| if (retval) |
| pm_runtime_put_sync(&udc->gadget.dev); |
| |
| done: |
| spin_unlock_irqrestore(udc->lock, flags); |
| return retval; |
| } |
| |
| /** |
| * ci13xxx_stop: unregister a gadget driver |
| * |
| * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details |
| */ |
| static int ci13xxx_stop(struct usb_gadget_driver *driver) |
| { |
| struct ci13xxx *udc = _udc; |
| unsigned long i, flags; |
| |
| trace("%p", driver); |
| |
| if (driver == NULL || |
| driver->unbind == NULL || |
| driver->setup == NULL || |
| driver->disconnect == NULL || |
| driver != udc->driver) |
| return -EINVAL; |
| |
| spin_lock_irqsave(udc->lock, flags); |
| |
| if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) || |
| udc->vbus_active) { |
| hw_device_state(0); |
| if (udc->udc_driver->notify_event) |
| udc->udc_driver->notify_event(udc, |
| CI13XXX_CONTROLLER_STOPPED_EVENT); |
| spin_unlock_irqrestore(udc->lock, flags); |
| _gadget_stop_activity(&udc->gadget); |
| spin_lock_irqsave(udc->lock, flags); |
| pm_runtime_put(&udc->gadget.dev); |
| } |
| |
| /* unbind gadget */ |
| spin_unlock_irqrestore(udc->lock, flags); |
| driver->unbind(&udc->gadget); /* MAY SLEEP */ |
| spin_lock_irqsave(udc->lock, flags); |
| |
| udc->gadget.dev.driver = NULL; |
| |
| /* free resources */ |
| for (i = 0; i < hw_ep_max; i++) { |
| struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| |
| if (!list_empty(&mEp->ep.ep_list)) |
| list_del_init(&mEp->ep.ep_list); |
| |
| if (mEp->qh.ptr != NULL) |
| dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); |
| } |
| |
| udc->gadget.ep0 = NULL; |
| udc->driver = NULL; |
| |
| spin_unlock_irqrestore(udc->lock, flags); |
| |
| if (udc->td_pool != NULL) { |
| dma_pool_destroy(udc->td_pool); |
| udc->td_pool = NULL; |
| } |
| if (udc->qh_pool != NULL) { |
| dma_pool_destroy(udc->qh_pool); |
| udc->qh_pool = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * BUS block |
| *****************************************************************************/ |
| /** |
| * udc_irq: global interrupt handler |
| * |
| * This function returns IRQ_HANDLED if the IRQ has been handled |
| * It locks access to registers |
| */ |
| static irqreturn_t udc_irq(void) |
| { |
| struct ci13xxx *udc = _udc; |
| irqreturn_t retval; |
| u32 intr; |
| |
| trace(); |
| |
| if (udc == NULL) { |
| err("ENODEV"); |
| return IRQ_HANDLED; |
| } |
| |
| spin_lock(udc->lock); |
| |
| if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) { |
| if (hw_cread(CAP_USBMODE, USBMODE_CM) != |
| USBMODE_CM_DEVICE) { |
| spin_unlock(udc->lock); |
| return IRQ_NONE; |
| } |
| } |
| intr = hw_test_and_clear_intr_active(); |
| if (intr) { |
| isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr; |
| isr_statistics.hndl.idx &= ISR_MASK; |
| isr_statistics.hndl.cnt++; |
| |
| /* order defines priority - do NOT change it */ |
| if (USBi_URI & intr) { |
| isr_statistics.uri++; |
| isr_reset_handler(udc); |
| } |
| if (USBi_PCI & intr) { |
| isr_statistics.pci++; |
| udc->gadget.speed = hw_port_is_high_speed() ? |
| USB_SPEED_HIGH : USB_SPEED_FULL; |
| if (udc->suspended && udc->driver->resume) { |
| spin_unlock(udc->lock); |
| udc->driver->resume(&udc->gadget); |
| spin_lock(udc->lock); |
| udc->suspended = 0; |
| } |
| } |
| if (USBi_UEI & intr) |
| isr_statistics.uei++; |
| if (USBi_UI & intr) { |
| isr_statistics.ui++; |
| isr_tr_complete_handler(udc); |
| } |
| if (USBi_SLI & intr) { |
| if (udc->gadget.speed != USB_SPEED_UNKNOWN && |
| udc->driver->suspend) { |
| udc->suspended = 1; |
| spin_unlock(udc->lock); |
| udc->driver->suspend(&udc->gadget); |
| spin_lock(udc->lock); |
| } |
| isr_statistics.sli++; |
| } |
| retval = IRQ_HANDLED; |
| } else { |
| isr_statistics.none++; |
| retval = IRQ_NONE; |
| } |
| spin_unlock(udc->lock); |
| |
| return retval; |
| } |
| |
| /** |
| * udc_release: driver release function |
| * @dev: device |
| * |
| * Currently does nothing |
| */ |
| static void udc_release(struct device *dev) |
| { |
| trace("%p", dev); |
| |
| if (dev == NULL) |
| err("EINVAL"); |
| } |
| |
| /** |
| * udc_probe: parent probe must call this to initialize UDC |
| * @dev: parent device |
| * @regs: registers base address |
| * @name: driver name |
| * |
| * This function returns an error code |
| * No interrupts active, the IRQ has not been requested yet |
| * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask |
| */ |
| static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, |
| void __iomem *regs) |
| { |
| struct ci13xxx *udc; |
| int retval = 0; |
| |
| trace("%p, %p, %p", dev, regs, driver->name); |
| |
| if (dev == NULL || regs == NULL || driver == NULL || |
| driver->name == NULL) |
| return -EINVAL; |
| |
| udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL); |
| if (udc == NULL) |
| return -ENOMEM; |
| |
| udc->lock = &udc_lock; |
| udc->regs = regs; |
| udc->udc_driver = driver; |
| |
| udc->gadget.ops = &usb_gadget_ops; |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| udc->gadget.max_speed = USB_SPEED_HIGH; |
| udc->gadget.is_otg = 0; |
| udc->gadget.name = driver->name; |
| |
| INIT_LIST_HEAD(&udc->gadget.ep_list); |
| udc->gadget.ep0 = NULL; |
| |
| dev_set_name(&udc->gadget.dev, "gadget"); |
| udc->gadget.dev.dma_mask = dev->dma_mask; |
| udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; |
| udc->gadget.dev.parent = dev; |
| udc->gadget.dev.release = udc_release; |
| |
| retval = hw_device_init(regs); |
| if (retval < 0) |
| goto free_udc; |
| |
| udc->transceiver = usb_get_transceiver(); |
| |
| if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) { |
| if (udc->transceiver == NULL) { |
| retval = -ENODEV; |
| goto free_udc; |
| } |
| } |
| |
| if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) { |
| retval = hw_device_reset(udc); |
| if (retval) |
| goto put_transceiver; |
| } |
| |
| retval = device_register(&udc->gadget.dev); |
| if (retval) { |
| put_device(&udc->gadget.dev); |
| goto put_transceiver; |
| } |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| retval = dbg_create_files(&udc->gadget.dev); |
| #endif |
| if (retval) |
| goto unreg_device; |
| |
| if (udc->transceiver) { |
| retval = otg_set_peripheral(udc->transceiver->otg, |
| &udc->gadget); |
| if (retval) |
| goto remove_dbg; |
| } |
| |
| retval = usb_add_gadget_udc(dev, &udc->gadget); |
| if (retval) |
| goto remove_trans; |
| |
| pm_runtime_no_callbacks(&udc->gadget.dev); |
| pm_runtime_enable(&udc->gadget.dev); |
| |
| _udc = udc; |
| return retval; |
| |
| remove_trans: |
| if (udc->transceiver) { |
| otg_set_peripheral(udc->transceiver->otg, &udc->gadget); |
| usb_put_transceiver(udc->transceiver); |
| } |
| |
| err("error = %i", retval); |
| remove_dbg: |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| dbg_remove_files(&udc->gadget.dev); |
| #endif |
| unreg_device: |
| device_unregister(&udc->gadget.dev); |
| put_transceiver: |
| if (udc->transceiver) |
| usb_put_transceiver(udc->transceiver); |
| free_udc: |
| kfree(udc); |
| _udc = NULL; |
| return retval; |
| } |
| |
| /** |
| * udc_remove: parent remove must call this to remove UDC |
| * |
| * No interrupts active, the IRQ has been released |
| */ |
| static void udc_remove(void) |
| { |
| struct ci13xxx *udc = _udc; |
| |
| if (udc == NULL) { |
| err("EINVAL"); |
| return; |
| } |
| usb_del_gadget_udc(&udc->gadget); |
| |
| if (udc->transceiver) { |
| otg_set_peripheral(udc->transceiver->otg, &udc->gadget); |
| usb_put_transceiver(udc->transceiver); |
| } |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| dbg_remove_files(&udc->gadget.dev); |
| #endif |
| device_unregister(&udc->gadget.dev); |
| |
| kfree(udc); |
| _udc = NULL; |
| } |