drivers/media/video/ovcamchip/ov6x30.c - LeafOS-Devices/android_kernel_samsung_exynos9820 - Gitiles

 /* OmniVision OV6630/OV6130 Camera Chip Support Code
  *
  * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
  * http://alpha.dyndns.org/ov511/
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
  */

 #define DEBUG

 #include <linux/slab.h>
 #include "ovcamchip_priv.h"

 /* Registers */
 #define REG_GAIN		0x00	/* gain [5:0] */
 #define REG_BLUE		0x01	/* blue gain */
 #define REG_RED			0x02	/* red gain */
 #define REG_SAT			0x03	/* saturation [7:3] */
 #define REG_CNT			0x05	/* Y contrast [3:0] */
 #define REG_BRT			0x06	/* Y brightness */
 #define REG_SHARP		0x07	/* sharpness */
 #define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
 #define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
 #define REG_EXP			0x10	/* exposure */

 /* Window parameters */
 #define HWSBASE 0x38
 #define HWEBASE 0x3A
 #define VWSBASE 0x05
 #define VWEBASE 0x06

 struct ov6x30 {
 	int auto_brt;
 	int auto_exp;
 	int backlight;
 	int bandfilt;
 	int mirror;
 };

 static struct ovcamchip_regvals regvals_init_6x30[] = {
 	{ 0x12, 0x80 }, /* reset */
 	{ 0x00, 0x1f }, /* Gain */
 	{ 0x01, 0x99 }, /* Blue gain */
 	{ 0x02, 0x7c }, /* Red gain */
 	{ 0x03, 0xc0 }, /* Saturation */
 	{ 0x05, 0x0a }, /* Contrast */
 	{ 0x06, 0x95 }, /* Brightness */
 	{ 0x07, 0x2d }, /* Sharpness */
 	{ 0x0c, 0x20 },
 	{ 0x0d, 0x20 },
 	{ 0x0e, 0x20 },
 	{ 0x0f, 0x05 },
 	{ 0x10, 0x9a }, /* "exposure check" */
 	{ 0x11, 0x00 }, /* Pixel clock = fastest */
 	{ 0x12, 0x24 }, /* Enable AGC and AWB */
 	{ 0x13, 0x21 },
 	{ 0x14, 0x80 },
 	{ 0x15, 0x01 },
 	{ 0x16, 0x03 },
 	{ 0x17, 0x38 },
 	{ 0x18, 0xea },
 	{ 0x19, 0x04 },
 	{ 0x1a, 0x93 },
 	{ 0x1b, 0x00 },
 	{ 0x1e, 0xc4 },
 	{ 0x1f, 0x04 },
 	{ 0x20, 0x20 },
 	{ 0x21, 0x10 },
 	{ 0x22, 0x88 },
 	{ 0x23, 0xc0 }, /* Crystal circuit power level */
 	{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
 	{ 0x26, 0xb2 }, /* BLC enable */
 	{ 0x27, 0xa2 },
 	{ 0x28, 0x00 },
 	{ 0x29, 0x00 },
 	{ 0x2a, 0x84 }, /* (keep) */
 	{ 0x2b, 0xa8 }, /* (keep) */
 	{ 0x2c, 0xa0 },
 	{ 0x2d, 0x95 },	/* Enable auto-brightness */
 	{ 0x2e, 0x88 },
 	{ 0x33, 0x26 },
 	{ 0x34, 0x03 },
 	{ 0x36, 0x8f },
 	{ 0x37, 0x80 },
 	{ 0x38, 0x83 },
 	{ 0x39, 0x80 },
 	{ 0x3a, 0x0f },
 	{ 0x3b, 0x3c },
 	{ 0x3c, 0x1a },
 	{ 0x3d, 0x80 },
 	{ 0x3e, 0x80 },
 	{ 0x3f, 0x0e },
 	{ 0x40, 0x00 }, /* White bal */
 	{ 0x41, 0x00 }, /* White bal */
 	{ 0x42, 0x80 },
 	{ 0x43, 0x3f }, /* White bal */
 	{ 0x44, 0x80 },
 	{ 0x45, 0x20 },
 	{ 0x46, 0x20 },
 	{ 0x47, 0x80 },
 	{ 0x48, 0x7f },
 	{ 0x49, 0x00 },
 	{ 0x4a, 0x00 },
 	{ 0x4b, 0x80 },
 	{ 0x4c, 0xd0 },
 	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
 	{ 0x4e, 0x40 },
 	{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
 	{ 0x50, 0xff },
 	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
 	{ 0x55, 0xff },
 	{ 0x56, 0x12 },
 	{ 0x57, 0x81 }, /* (default) */
 	{ 0x58, 0x75 },
 	{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
 	{ 0x5a, 0x2c },
 	{ 0x5b, 0x0f }, /* AWB chrominance levels */
 	{ 0x5c, 0x10 },
 	{ 0x3d, 0x80 },
 	{ 0x27, 0xa6 },
 	/* Toggle AWB off and on */
 	{ 0x12, 0x20 },
 	{ 0x12, 0x24 },

 	{ 0xff, 0xff },	/* END MARKER */
 };

 /* This initializes the OV6x30 camera chip and relevant variables. */
 static int ov6x30_init(struct i2c_client *c)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov6x30 *s;
 	int rc;

 	DDEBUG(4, &c->dev, "entered");

 	rc = ov_write_regvals(c, regvals_init_6x30);
 	if (rc < 0)
 		return rc;

 	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
 	if (!s)
 		return -ENOMEM;
 	memset(s, 0, sizeof *s);

 	s->auto_brt = 1;
 	s->auto_exp = 1;

 	return rc;
 }

 static int ov6x30_free(struct i2c_client *c)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);

 	kfree(ov->spriv);
 	return 0;
 }

 static int ov6x30_set_control(struct i2c_client *c,
 			      struct ovcamchip_control *ctl)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov6x30 *s = ov->spriv;
 	int rc;
 	int v = ctl->value;

 	switch (ctl->id) {
 	case OVCAMCHIP_CID_CONT:
 		rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
 		break;
 	case OVCAMCHIP_CID_BRIGHT:
 		rc = ov_write(c, REG_BRT, v >> 8);
 		break;
 	case OVCAMCHIP_CID_SAT:
 		rc = ov_write(c, REG_SAT, v >> 8);
 		break;
 	case OVCAMCHIP_CID_HUE:
 		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
 		if (rc < 0)
 			goto out;

 		rc = ov_write(c, REG_BLUE, v >> 8);
 		break;
 	case OVCAMCHIP_CID_EXP:
 		rc = ov_write(c, REG_EXP, v);
 		break;
 	case OVCAMCHIP_CID_FREQ:
 	{
 		int sixty = (v == 60);

 		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
 		if (rc < 0)
 			goto out;

 		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
 		break;
 	}
 	case OVCAMCHIP_CID_BANDFILT:
 		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
 		s->bandfilt = v;
 		break;
 	case OVCAMCHIP_CID_AUTOBRIGHT:
 		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
 		s->auto_brt = v;
 		break;
 	case OVCAMCHIP_CID_AUTOEXP:
 		rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
 		s->auto_exp = v;
 		break;
 	case OVCAMCHIP_CID_BACKLIGHT:
 	{
 		rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
 		if (rc < 0)
 			goto out;

 		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
 		if (rc < 0)
 			goto out;

 		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
 		s->backlight = v;
 		break;
 	}
 	case OVCAMCHIP_CID_MIRROR:
 		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
 		s->mirror = v;
 		break;
 	default:
 		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 		return -EPERM;
 	}

 out:
 	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
 	return rc;
 }

 static int ov6x30_get_control(struct i2c_client *c,
 			      struct ovcamchip_control *ctl)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov6x30 *s = ov->spriv;
 	int rc = 0;
 	unsigned char val = 0;

 	switch (ctl->id) {
 	case OVCAMCHIP_CID_CONT:
 		rc = ov_read(c, REG_CNT, &val);
 		ctl->value = (val & 0x0f) << 12;
 		break;
 	case OVCAMCHIP_CID_BRIGHT:
 		rc = ov_read(c, REG_BRT, &val);
 		ctl->value = val << 8;
 		break;
 	case OVCAMCHIP_CID_SAT:
 		rc = ov_read(c, REG_SAT, &val);
 		ctl->value = val << 8;
 		break;
 	case OVCAMCHIP_CID_HUE:
 		rc = ov_read(c, REG_BLUE, &val);
 		ctl->value = val << 8;
 		break;
 	case OVCAMCHIP_CID_EXP:
 		rc = ov_read(c, REG_EXP, &val);
 		ctl->value = val;
 		break;
 	case OVCAMCHIP_CID_BANDFILT:
 		ctl->value = s->bandfilt;
 		break;
 	case OVCAMCHIP_CID_AUTOBRIGHT:
 		ctl->value = s->auto_brt;
 		break;
 	case OVCAMCHIP_CID_AUTOEXP:
 		ctl->value = s->auto_exp;
 		break;
 	case OVCAMCHIP_CID_BACKLIGHT:
 		ctl->value = s->backlight;
 		break;
 	case OVCAMCHIP_CID_MIRROR:
 		ctl->value = s->mirror;
 		break;
 	default:
 		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 		return -EPERM;
 	}

 	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
 	return rc;
 }

 static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
 {
 	/******** QCIF-specific regs ********/

 	ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);

 	/******** Palette-specific regs ********/

 	if (win->format == VIDEO_PALETTE_GREY) {
 		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
 			/* Do nothing - we're already in 8-bit mode */
 		} else {
 			ov_write_mask(c, 0x13, 0x20, 0x20);
 		}
 	} else {
 		/* The OV518 needs special treatment. Although both the OV518
 		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
 		 * bus is actually used. The UV bus is tied to ground.
 		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
 		 * output mode */

 		if (c->adapter->id == I2C_HW_SMBUS_OV518) {
 			/* Do nothing - we want to stay in 8-bit mode */
 			/* Warning: Messing with reg 0x13 breaks OV518 color */
 		} else {
 			ov_write_mask(c, 0x13, 0x00, 0x20);
 		}
 	}

 	/******** Clock programming ********/

 	ov_write(c, 0x11, win->clockdiv);

 	return 0;
 }

 static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
 {
 	int ret, hwscale, vwscale;

 	ret = ov6x30_mode_init(c, win);
 	if (ret < 0)
 		return ret;

 	if (win->quarter) {
 		hwscale = 0;
 		vwscale = 0;
 	} else {
 		hwscale = 1;
 		vwscale = 1;	/* The datasheet says 0; it's wrong */
 	}

 	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
 	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
 	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
 	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));

 	return 0;
 }

 static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
 {
 	switch (cmd) {
 	case OVCAMCHIP_CMD_S_CTRL:
 		return ov6x30_set_control(c, arg);
 	case OVCAMCHIP_CMD_G_CTRL:
 		return ov6x30_get_control(c, arg);
 	case OVCAMCHIP_CMD_S_MODE:
 		return ov6x30_set_window(c, arg);
 	default:
 		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
 		return -ENOIOCTLCMD;
 	}
 }

 struct ovcamchip_ops ov6x30_ops = {
 	.init    =	ov6x30_init,
 	.free    =	ov6x30_free,
 	.command =	ov6x30_command,
 };
	/* OmniVision OV6630/OV6130 Camera Chip Support Code
	*
	* Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
	* http://alpha.dyndns.org/ov511/
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
	*/

	#define DEBUG

	#include <linux/slab.h>
	#include "ovcamchip_priv.h"

	/* Registers */
	#define REG_GAIN 0x00 /* gain [5:0] */
	#define REG_BLUE 0x01 /* blue gain */
	#define REG_RED 0x02 /* red gain */
	#define REG_SAT 0x03 /* saturation [7:3] */
	#define REG_CNT 0x05 /* Y contrast [3:0] */
	#define REG_BRT 0x06 /* Y brightness */
	#define REG_SHARP 0x07 /* sharpness */
	#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
	#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
	#define REG_EXP 0x10 /* exposure */

	/* Window parameters */
	#define HWSBASE 0x38
	#define HWEBASE 0x3A
	#define VWSBASE 0x05
	#define VWEBASE 0x06

	struct ov6x30 {
	int auto_brt;
	int auto_exp;
	int backlight;
	int bandfilt;
	int mirror;
	};

	static struct ovcamchip_regvals regvals_init_6x30[] = {
	{ 0x12, 0x80 }, /* reset */
	{ 0x00, 0x1f }, /* Gain */
	{ 0x01, 0x99 }, /* Blue gain */
	{ 0x02, 0x7c }, /* Red gain */
	{ 0x03, 0xc0 }, /* Saturation */
	{ 0x05, 0x0a }, /* Contrast */
	{ 0x06, 0x95 }, /* Brightness */
	{ 0x07, 0x2d }, /* Sharpness */
	{ 0x0c, 0x20 },
	{ 0x0d, 0x20 },
	{ 0x0e, 0x20 },
	{ 0x0f, 0x05 },
	{ 0x10, 0x9a }, /* "exposure check" */
	{ 0x11, 0x00 }, /* Pixel clock = fastest */
	{ 0x12, 0x24 }, /* Enable AGC and AWB */
	{ 0x13, 0x21 },
	{ 0x14, 0x80 },
	{ 0x15, 0x01 },
	{ 0x16, 0x03 },
	{ 0x17, 0x38 },
	{ 0x18, 0xea },
	{ 0x19, 0x04 },
	{ 0x1a, 0x93 },
	{ 0x1b, 0x00 },
	{ 0x1e, 0xc4 },
	{ 0x1f, 0x04 },
	{ 0x20, 0x20 },
	{ 0x21, 0x10 },
	{ 0x22, 0x88 },
	{ 0x23, 0xc0 }, /* Crystal circuit power level */
	{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
	{ 0x26, 0xb2 }, /* BLC enable */
	{ 0x27, 0xa2 },
	{ 0x28, 0x00 },
	{ 0x29, 0x00 },
	{ 0x2a, 0x84 }, /* (keep) */
	{ 0x2b, 0xa8 }, /* (keep) */
	{ 0x2c, 0xa0 },
	{ 0x2d, 0x95 }, /* Enable auto-brightness */
	{ 0x2e, 0x88 },
	{ 0x33, 0x26 },
	{ 0x34, 0x03 },
	{ 0x36, 0x8f },
	{ 0x37, 0x80 },
	{ 0x38, 0x83 },
	{ 0x39, 0x80 },
	{ 0x3a, 0x0f },
	{ 0x3b, 0x3c },
	{ 0x3c, 0x1a },
	{ 0x3d, 0x80 },
	{ 0x3e, 0x80 },
	{ 0x3f, 0x0e },
	{ 0x40, 0x00 }, /* White bal */
	{ 0x41, 0x00 }, /* White bal */
	{ 0x42, 0x80 },
	{ 0x43, 0x3f }, /* White bal */
	{ 0x44, 0x80 },
	{ 0x45, 0x20 },
	{ 0x46, 0x20 },
	{ 0x47, 0x80 },
	{ 0x48, 0x7f },
	{ 0x49, 0x00 },
	{ 0x4a, 0x00 },
	{ 0x4b, 0x80 },
	{ 0x4c, 0xd0 },
	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
	{ 0x4e, 0x40 },
	{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
	{ 0x50, 0xff },
	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
	{ 0x55, 0xff },
	{ 0x56, 0x12 },
	{ 0x57, 0x81 }, /* (default) */
	{ 0x58, 0x75 },
	{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
	{ 0x5a, 0x2c },
	{ 0x5b, 0x0f }, /* AWB chrominance levels */
	{ 0x5c, 0x10 },
	{ 0x3d, 0x80 },
	{ 0x27, 0xa6 },
	/* Toggle AWB off and on */
	{ 0x12, 0x20 },
	{ 0x12, 0x24 },

	{ 0xff, 0xff }, /* END MARKER */
	};

	/* This initializes the OV6x30 camera chip and relevant variables. */
	static int ov6x30_init(struct i2c_client *c)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov6x30 *s;
	int rc;

	DDEBUG(4, &c->dev, "entered");

	rc = ov_write_regvals(c, regvals_init_6x30);
	if (rc < 0)
	return rc;

	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
	if (!s)
	return -ENOMEM;
	memset(s, 0, sizeof *s);

	s->auto_brt = 1;
	s->auto_exp = 1;

	return rc;
	}

	static int ov6x30_free(struct i2c_client *c)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);

	kfree(ov->spriv);
	return 0;
	}

	static int ov6x30_set_control(struct i2c_client *c,
	struct ovcamchip_control *ctl)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov6x30 *s = ov->spriv;
	int rc;
	int v = ctl->value;

	switch (ctl->id) {
	case OVCAMCHIP_CID_CONT:
	rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
	break;
	case OVCAMCHIP_CID_BRIGHT:
	rc = ov_write(c, REG_BRT, v >> 8);
	break;
	case OVCAMCHIP_CID_SAT:
	rc = ov_write(c, REG_SAT, v >> 8);
	break;
	case OVCAMCHIP_CID_HUE:
	rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
	if (rc < 0)
	goto out;

	rc = ov_write(c, REG_BLUE, v >> 8);
	break;
	case OVCAMCHIP_CID_EXP:
	rc = ov_write(c, REG_EXP, v);
	break;
	case OVCAMCHIP_CID_FREQ:
	{
	int sixty = (v == 60);

	rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
	if (rc < 0)
	goto out;

	rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
	break;
	}
	case OVCAMCHIP_CID_BANDFILT:
	rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
	s->bandfilt = v;
	break;
	case OVCAMCHIP_CID_AUTOBRIGHT:
	rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
	s->auto_brt = v;
	break;
	case OVCAMCHIP_CID_AUTOEXP:
	rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
	s->auto_exp = v;
	break;
	case OVCAMCHIP_CID_BACKLIGHT:
	{
	rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
	if (rc < 0)
	goto out;

	rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
	if (rc < 0)
	goto out;

	rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
	s->backlight = v;
	break;
	}
	case OVCAMCHIP_CID_MIRROR:
	rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
	s->mirror = v;
	break;
	default:
	DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
	return -EPERM;
	}

	out:
	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
	return rc;
	}

	static int ov6x30_get_control(struct i2c_client *c,
	struct ovcamchip_control *ctl)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov6x30 *s = ov->spriv;
	int rc = 0;
	unsigned char val = 0;

	switch (ctl->id) {
	case OVCAMCHIP_CID_CONT:
	rc = ov_read(c, REG_CNT, &val);
	ctl->value = (val & 0x0f) << 12;
	break;
	case OVCAMCHIP_CID_BRIGHT:
	rc = ov_read(c, REG_BRT, &val);
	ctl->value = val << 8;
	break;
	case OVCAMCHIP_CID_SAT:
	rc = ov_read(c, REG_SAT, &val);
	ctl->value = val << 8;
	break;
	case OVCAMCHIP_CID_HUE:
	rc = ov_read(c, REG_BLUE, &val);
	ctl->value = val << 8;
	break;
	case OVCAMCHIP_CID_EXP:
	rc = ov_read(c, REG_EXP, &val);
	ctl->value = val;
	break;
	case OVCAMCHIP_CID_BANDFILT:
	ctl->value = s->bandfilt;
	break;
	case OVCAMCHIP_CID_AUTOBRIGHT:
	ctl->value = s->auto_brt;
	break;
	case OVCAMCHIP_CID_AUTOEXP:
	ctl->value = s->auto_exp;
	break;
	case OVCAMCHIP_CID_BACKLIGHT:
	ctl->value = s->backlight;
	break;
	case OVCAMCHIP_CID_MIRROR:
	ctl->value = s->mirror;
	break;
	default:
	DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
	return -EPERM;
	}

	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
	return rc;
	}

	static int ov6x30_mode_init(struct i2c_client c, struct ovcamchip_window win)
	{
	/****** QCIF-specific regs ******/

	ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);

	/****** Palette-specific regs ******/

	if (win->format == VIDEO_PALETTE_GREY) {
	if (c->adapter->id == I2C_HW_SMBUS_OV518) {
	/* Do nothing - we're already in 8-bit mode */
	} else {
	ov_write_mask(c, 0x13, 0x20, 0x20);
	}
	} else {
	/* The OV518 needs special treatment. Although both the OV518
	* and the OV6630 support a 16-bit video bus, only the 8 bit Y
	* bus is actually used. The UV bus is tied to ground.
	* Therefore, the OV6630 needs to be in 8-bit multiplexed
	* output mode */

	if (c->adapter->id == I2C_HW_SMBUS_OV518) {
	/* Do nothing - we want to stay in 8-bit mode */
	/* Warning: Messing with reg 0x13 breaks OV518 color */
	} else {
	ov_write_mask(c, 0x13, 0x00, 0x20);
	}
	}

	/****** Clock programming ******/

	ov_write(c, 0x11, win->clockdiv);

	return 0;
	}

	static int ov6x30_set_window(struct i2c_client c, struct ovcamchip_window win)
	{
	int ret, hwscale, vwscale;

	ret = ov6x30_mode_init(c, win);
	if (ret < 0)
	return ret;

	if (win->quarter) {
	hwscale = 0;
	vwscale = 0;
	} else {
	hwscale = 1;
	vwscale = 1; /* The datasheet says 0; it's wrong */
	}

	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));

	return 0;
	}

	static int ov6x30_command(struct i2c_client c, unsigned int cmd, void arg)
	{
	switch (cmd) {
	case OVCAMCHIP_CMD_S_CTRL:
	return ov6x30_set_control(c, arg);
	case OVCAMCHIP_CMD_G_CTRL:
	return ov6x30_get_control(c, arg);
	case OVCAMCHIP_CMD_S_MODE:
	return ov6x30_set_window(c, arg);
	default:
	DDEBUG(2, &c->dev, "command not supported: %d", cmd);
	return -ENOIOCTLCMD;
	}
	}

	struct ovcamchip_ops ov6x30_ops = {
	.init = ov6x30_init,
	.free = ov6x30_free,
	.command = ov6x30_command,
	};