| /* |
| * Line 6 Linux USB driver |
| * |
| * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/export.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/hwdep.h> |
| |
| #include "capture.h" |
| #include "driver.h" |
| #include "midi.h" |
| #include "playback.h" |
| |
| #define DRIVER_AUTHOR "Markus Grabner <grabner@icg.tugraz.at>" |
| #define DRIVER_DESC "Line 6 USB Driver" |
| |
| /* |
| This is Line 6's MIDI manufacturer ID. |
| */ |
| const unsigned char line6_midi_id[3] = { |
| 0x00, 0x01, 0x0c |
| }; |
| EXPORT_SYMBOL_GPL(line6_midi_id); |
| |
| /* |
| Code to request version of POD, Variax interface |
| (and maybe other devices). |
| */ |
| static const char line6_request_version[] = { |
| 0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7 |
| }; |
| |
| /* |
| Class for asynchronous messages. |
| */ |
| struct message { |
| struct usb_line6 *line6; |
| const char *buffer; |
| int size; |
| int done; |
| }; |
| |
| /* |
| Forward declarations. |
| */ |
| static void line6_data_received(struct urb *urb); |
| static int line6_send_raw_message_async_part(struct message *msg, |
| struct urb *urb); |
| |
| /* |
| Start to listen on endpoint. |
| */ |
| static int line6_start_listen(struct usb_line6 *line6) |
| { |
| int err; |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| usb_fill_int_urb(line6->urb_listen, line6->usbdev, |
| usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r), |
| line6->buffer_listen, LINE6_BUFSIZE_LISTEN, |
| line6_data_received, line6, line6->interval); |
| } else { |
| usb_fill_bulk_urb(line6->urb_listen, line6->usbdev, |
| usb_rcvbulkpipe(line6->usbdev, line6->properties->ep_ctrl_r), |
| line6->buffer_listen, LINE6_BUFSIZE_LISTEN, |
| line6_data_received, line6); |
| } |
| |
| /* sanity checks of EP before actually submitting */ |
| if (usb_urb_ep_type_check(line6->urb_listen)) { |
| dev_err(line6->ifcdev, "invalid control EP\n"); |
| return -EINVAL; |
| } |
| |
| line6->urb_listen->actual_length = 0; |
| err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC); |
| return err; |
| } |
| |
| /* |
| Stop listening on endpoint. |
| */ |
| static void line6_stop_listen(struct usb_line6 *line6) |
| { |
| usb_kill_urb(line6->urb_listen); |
| } |
| |
| /* |
| Send raw message in pieces of wMaxPacketSize bytes. |
| */ |
| static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, |
| int size) |
| { |
| int i, done = 0; |
| const struct line6_properties *properties = line6->properties; |
| |
| for (i = 0; i < size; i += line6->max_packet_size) { |
| int partial; |
| const char *frag_buf = buffer + i; |
| int frag_size = min(line6->max_packet_size, size - i); |
| int retval; |
| |
| if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| retval = usb_interrupt_msg(line6->usbdev, |
| usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w), |
| (char *)frag_buf, frag_size, |
| &partial, LINE6_TIMEOUT); |
| } else { |
| retval = usb_bulk_msg(line6->usbdev, |
| usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w), |
| (char *)frag_buf, frag_size, |
| &partial, LINE6_TIMEOUT); |
| } |
| |
| if (retval) { |
| dev_err(line6->ifcdev, |
| "usb_bulk_msg failed (%d)\n", retval); |
| break; |
| } |
| |
| done += frag_size; |
| } |
| |
| return done; |
| } |
| |
| /* |
| Notification of completion of asynchronous request transmission. |
| */ |
| static void line6_async_request_sent(struct urb *urb) |
| { |
| struct message *msg = (struct message *)urb->context; |
| |
| if (msg->done >= msg->size) { |
| usb_free_urb(urb); |
| kfree(msg); |
| } else |
| line6_send_raw_message_async_part(msg, urb); |
| } |
| |
| /* |
| Asynchronously send part of a raw message. |
| */ |
| static int line6_send_raw_message_async_part(struct message *msg, |
| struct urb *urb) |
| { |
| int retval; |
| struct usb_line6 *line6 = msg->line6; |
| int done = msg->done; |
| int bytes = min(msg->size - done, line6->max_packet_size); |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| usb_fill_int_urb(urb, line6->usbdev, |
| usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w), |
| (char *)msg->buffer + done, bytes, |
| line6_async_request_sent, msg, line6->interval); |
| } else { |
| usb_fill_bulk_urb(urb, line6->usbdev, |
| usb_sndbulkpipe(line6->usbdev, line6->properties->ep_ctrl_w), |
| (char *)msg->buffer + done, bytes, |
| line6_async_request_sent, msg); |
| } |
| |
| msg->done += bytes; |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| |
| if (retval < 0) { |
| dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n", |
| __func__, retval); |
| usb_free_urb(urb); |
| kfree(msg); |
| return retval; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| Setup and start timer. |
| */ |
| void line6_start_timer(struct timer_list *timer, unsigned long msecs, |
| void (*function)(unsigned long), unsigned long data) |
| { |
| setup_timer(timer, function, data); |
| mod_timer(timer, jiffies + msecs_to_jiffies(msecs)); |
| } |
| EXPORT_SYMBOL_GPL(line6_start_timer); |
| |
| /* |
| Asynchronously send raw message. |
| */ |
| int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, |
| int size) |
| { |
| struct message *msg; |
| struct urb *urb; |
| |
| /* create message: */ |
| msg = kmalloc(sizeof(struct message), GFP_ATOMIC); |
| if (msg == NULL) |
| return -ENOMEM; |
| |
| /* create URB: */ |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| |
| if (urb == NULL) { |
| kfree(msg); |
| return -ENOMEM; |
| } |
| |
| /* set message data: */ |
| msg->line6 = line6; |
| msg->buffer = buffer; |
| msg->size = size; |
| msg->done = 0; |
| |
| /* start sending: */ |
| return line6_send_raw_message_async_part(msg, urb); |
| } |
| EXPORT_SYMBOL_GPL(line6_send_raw_message_async); |
| |
| /* |
| Send asynchronous device version request. |
| */ |
| int line6_version_request_async(struct usb_line6 *line6) |
| { |
| char *buffer; |
| int retval; |
| |
| buffer = kmemdup(line6_request_version, |
| sizeof(line6_request_version), GFP_ATOMIC); |
| if (buffer == NULL) |
| return -ENOMEM; |
| |
| retval = line6_send_raw_message_async(line6, buffer, |
| sizeof(line6_request_version)); |
| kfree(buffer); |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(line6_version_request_async); |
| |
| /* |
| Send sysex message in pieces of wMaxPacketSize bytes. |
| */ |
| int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, |
| int size) |
| { |
| return line6_send_raw_message(line6, buffer, |
| size + SYSEX_EXTRA_SIZE) - |
| SYSEX_EXTRA_SIZE; |
| } |
| EXPORT_SYMBOL_GPL(line6_send_sysex_message); |
| |
| /* |
| Allocate buffer for sysex message and prepare header. |
| @param code sysex message code |
| @param size number of bytes between code and sysex end |
| */ |
| char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2, |
| int size) |
| { |
| char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC); |
| |
| if (!buffer) |
| return NULL; |
| |
| buffer[0] = LINE6_SYSEX_BEGIN; |
| memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id)); |
| buffer[sizeof(line6_midi_id) + 1] = code1; |
| buffer[sizeof(line6_midi_id) + 2] = code2; |
| buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END; |
| return buffer; |
| } |
| EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer); |
| |
| /* |
| Notification of data received from the Line 6 device. |
| */ |
| static void line6_data_received(struct urb *urb) |
| { |
| struct usb_line6 *line6 = (struct usb_line6 *)urb->context; |
| struct midi_buffer *mb = &line6->line6midi->midibuf_in; |
| int done; |
| |
| if (urb->status == -ESHUTDOWN) |
| return; |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| done = |
| line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length); |
| |
| if (done < urb->actual_length) { |
| line6_midibuf_ignore(mb, done); |
| dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n", |
| done, urb->actual_length); |
| } |
| |
| for (;;) { |
| done = |
| line6_midibuf_read(mb, line6->buffer_message, |
| LINE6_MIDI_MESSAGE_MAXLEN, |
| LINE6_MIDIBUF_READ_RX); |
| |
| if (done <= 0) |
| break; |
| |
| line6->message_length = done; |
| line6_midi_receive(line6, line6->buffer_message, done); |
| |
| if (line6->process_message) |
| line6->process_message(line6); |
| } |
| } else { |
| line6->buffer_message = urb->transfer_buffer; |
| line6->message_length = urb->actual_length; |
| if (line6->process_message) |
| line6->process_message(line6); |
| line6->buffer_message = NULL; |
| } |
| |
| line6_start_listen(line6); |
| } |
| |
| #define LINE6_READ_WRITE_STATUS_DELAY 2 /* milliseconds */ |
| #define LINE6_READ_WRITE_MAX_RETRIES 50 |
| |
| /* |
| Read data from device. |
| */ |
| int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, |
| unsigned datalen) |
| { |
| struct usb_device *usbdev = line6->usbdev; |
| int ret; |
| unsigned char *len; |
| unsigned count; |
| |
| if (address > 0xffff || datalen > 0xff) |
| return -EINVAL; |
| |
| len = kmalloc(sizeof(*len), GFP_KERNEL); |
| if (!len) |
| return -ENOMEM; |
| |
| /* query the serial number: */ |
| ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, |
| (datalen << 8) | 0x21, address, |
| NULL, 0, LINE6_TIMEOUT); |
| |
| if (ret < 0) { |
| dev_err(line6->ifcdev, "read request failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| /* Wait for data length. We'll get 0xff until length arrives. */ |
| for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) { |
| mdelay(LINE6_READ_WRITE_STATUS_DELAY); |
| |
| ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | |
| USB_DIR_IN, |
| 0x0012, 0x0000, len, 1, |
| LINE6_TIMEOUT); |
| if (ret < 0) { |
| dev_err(line6->ifcdev, |
| "receive length failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| if (*len != 0xff) |
| break; |
| } |
| |
| ret = -EIO; |
| if (*len == 0xff) { |
| dev_err(line6->ifcdev, "read failed after %d retries\n", |
| count); |
| goto exit; |
| } else if (*len != datalen) { |
| /* should be equal or something went wrong */ |
| dev_err(line6->ifcdev, |
| "length mismatch (expected %d, got %d)\n", |
| (int)datalen, (int)*len); |
| goto exit; |
| } |
| |
| /* receive the result: */ |
| ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, |
| 0x0013, 0x0000, data, datalen, |
| LINE6_TIMEOUT); |
| |
| if (ret < 0) |
| dev_err(line6->ifcdev, "read failed (error %d)\n", ret); |
| |
| exit: |
| kfree(len); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(line6_read_data); |
| |
| /* |
| Write data to device. |
| */ |
| int line6_write_data(struct usb_line6 *line6, unsigned address, void *data, |
| unsigned datalen) |
| { |
| struct usb_device *usbdev = line6->usbdev; |
| int ret; |
| unsigned char *status; |
| int count; |
| |
| if (address > 0xffff || datalen > 0xffff) |
| return -EINVAL; |
| |
| status = kmalloc(sizeof(*status), GFP_KERNEL); |
| if (!status) |
| return -ENOMEM; |
| |
| ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, |
| 0x0022, address, data, datalen, |
| LINE6_TIMEOUT); |
| |
| if (ret < 0) { |
| dev_err(line6->ifcdev, |
| "write request failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) { |
| mdelay(LINE6_READ_WRITE_STATUS_DELAY); |
| |
| ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), |
| 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | |
| USB_DIR_IN, |
| 0x0012, 0x0000, |
| status, 1, LINE6_TIMEOUT); |
| |
| if (ret < 0) { |
| dev_err(line6->ifcdev, |
| "receiving status failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| if (*status != 0xff) |
| break; |
| } |
| |
| if (*status == 0xff) { |
| dev_err(line6->ifcdev, "write failed after %d retries\n", |
| count); |
| ret = -EIO; |
| } else if (*status != 0) { |
| dev_err(line6->ifcdev, "write failed (error %d)\n", ret); |
| ret = -EIO; |
| } |
| exit: |
| kfree(status); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(line6_write_data); |
| |
| /* |
| Read Line 6 device serial number. |
| (POD, TonePort, GuitarPort) |
| */ |
| int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number) |
| { |
| return line6_read_data(line6, 0x80d0, serial_number, |
| sizeof(*serial_number)); |
| } |
| EXPORT_SYMBOL_GPL(line6_read_serial_number); |
| |
| /* |
| Card destructor. |
| */ |
| static void line6_destruct(struct snd_card *card) |
| { |
| struct usb_line6 *line6 = card->private_data; |
| struct usb_device *usbdev = line6->usbdev; |
| |
| /* Free buffer memory first. We cannot depend on the existence of private |
| * data from the (podhd) module, it may be gone already during this call |
| */ |
| kfree(line6->buffer_message); |
| |
| kfree(line6->buffer_listen); |
| |
| /* then free URBs: */ |
| usb_free_urb(line6->urb_listen); |
| line6->urb_listen = NULL; |
| |
| /* decrement reference counters: */ |
| usb_put_dev(usbdev); |
| } |
| |
| static void line6_get_usb_properties(struct usb_line6 *line6) |
| { |
| struct usb_device *usbdev = line6->usbdev; |
| const struct line6_properties *properties = line6->properties; |
| int pipe; |
| struct usb_host_endpoint *ep = NULL; |
| |
| if (properties->capabilities & LINE6_CAP_CONTROL) { |
| if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| pipe = usb_rcvintpipe(line6->usbdev, |
| line6->properties->ep_ctrl_r); |
| } else { |
| pipe = usb_rcvbulkpipe(line6->usbdev, |
| line6->properties->ep_ctrl_r); |
| } |
| ep = usbdev->ep_in[usb_pipeendpoint(pipe)]; |
| } |
| |
| /* Control data transfer properties */ |
| if (ep) { |
| line6->interval = ep->desc.bInterval; |
| line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize); |
| } else { |
| if (properties->capabilities & LINE6_CAP_CONTROL) { |
| dev_err(line6->ifcdev, |
| "endpoint not available, using fallback values"); |
| } |
| line6->interval = LINE6_FALLBACK_INTERVAL; |
| line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE; |
| } |
| |
| /* Isochronous transfer properties */ |
| if (usbdev->speed == USB_SPEED_LOW) { |
| line6->intervals_per_second = USB_LOW_INTERVALS_PER_SECOND; |
| line6->iso_buffers = USB_LOW_ISO_BUFFERS; |
| } else { |
| line6->intervals_per_second = USB_HIGH_INTERVALS_PER_SECOND; |
| line6->iso_buffers = USB_HIGH_ISO_BUFFERS; |
| } |
| } |
| |
| /* Enable buffering of incoming messages, flush the buffer */ |
| static int line6_hwdep_open(struct snd_hwdep *hw, struct file *file) |
| { |
| struct usb_line6 *line6 = hw->private_data; |
| |
| /* NOTE: hwdep layer provides atomicity here */ |
| |
| line6->messages.active = 1; |
| |
| return 0; |
| } |
| |
| /* Stop buffering */ |
| static int line6_hwdep_release(struct snd_hwdep *hw, struct file *file) |
| { |
| struct usb_line6 *line6 = hw->private_data; |
| |
| line6->messages.active = 0; |
| |
| return 0; |
| } |
| |
| /* Read from circular buffer, return to user */ |
| static long |
| line6_hwdep_read(struct snd_hwdep *hwdep, char __user *buf, long count, |
| loff_t *offset) |
| { |
| struct usb_line6 *line6 = hwdep->private_data; |
| long rv = 0; |
| unsigned int out_count; |
| |
| if (mutex_lock_interruptible(&line6->messages.read_lock)) |
| return -ERESTARTSYS; |
| |
| while (kfifo_len(&line6->messages.fifo) == 0) { |
| mutex_unlock(&line6->messages.read_lock); |
| |
| rv = wait_event_interruptible( |
| line6->messages.wait_queue, |
| kfifo_len(&line6->messages.fifo) != 0); |
| if (rv < 0) |
| return rv; |
| |
| if (mutex_lock_interruptible(&line6->messages.read_lock)) |
| return -ERESTARTSYS; |
| } |
| |
| if (kfifo_peek_len(&line6->messages.fifo) > count) { |
| /* Buffer too small; allow re-read of the current item... */ |
| rv = -EINVAL; |
| } else { |
| rv = kfifo_to_user(&line6->messages.fifo, buf, count, &out_count); |
| if (rv == 0) |
| rv = out_count; |
| } |
| |
| mutex_unlock(&line6->messages.read_lock); |
| return rv; |
| } |
| |
| /* Write directly (no buffering) to device by user*/ |
| static long |
| line6_hwdep_write(struct snd_hwdep *hwdep, const char __user *data, long count, |
| loff_t *offset) |
| { |
| struct usb_line6 *line6 = hwdep->private_data; |
| int rv; |
| char *data_copy; |
| |
| if (count > line6->max_packet_size * LINE6_RAW_MESSAGES_MAXCOUNT) { |
| /* This is an arbitrary limit - still better than nothing... */ |
| return -EINVAL; |
| } |
| |
| data_copy = memdup_user(data, count); |
| if (IS_ERR(data_copy)) |
| return PTR_ERR(data_copy); |
| |
| rv = line6_send_raw_message(line6, data_copy, count); |
| |
| kfree(data_copy); |
| return rv; |
| } |
| |
| static const struct snd_hwdep_ops hwdep_ops = { |
| .open = line6_hwdep_open, |
| .release = line6_hwdep_release, |
| .read = line6_hwdep_read, |
| .write = line6_hwdep_write, |
| }; |
| |
| /* Insert into circular buffer */ |
| static void line6_hwdep_push_message(struct usb_line6 *line6) |
| { |
| if (!line6->messages.active) |
| return; |
| |
| if (kfifo_avail(&line6->messages.fifo) >= line6->message_length) { |
| /* No race condition here, there's only one writer */ |
| kfifo_in(&line6->messages.fifo, |
| line6->buffer_message, line6->message_length); |
| } /* else TODO: signal overflow */ |
| |
| wake_up_interruptible(&line6->messages.wait_queue); |
| } |
| |
| static int line6_hwdep_init(struct usb_line6 *line6) |
| { |
| int err; |
| struct snd_hwdep *hwdep; |
| |
| /* TODO: usb_driver_claim_interface(); */ |
| line6->process_message = line6_hwdep_push_message; |
| line6->messages.active = 0; |
| init_waitqueue_head(&line6->messages.wait_queue); |
| mutex_init(&line6->messages.read_lock); |
| INIT_KFIFO(line6->messages.fifo); |
| |
| err = snd_hwdep_new(line6->card, "config", 0, &hwdep); |
| if (err < 0) |
| goto end; |
| strcpy(hwdep->name, "config"); |
| hwdep->iface = SNDRV_HWDEP_IFACE_LINE6; |
| hwdep->ops = hwdep_ops; |
| hwdep->private_data = line6; |
| hwdep->exclusive = true; |
| |
| end: |
| return err; |
| } |
| |
| static int line6_init_cap_control(struct usb_line6 *line6) |
| { |
| int ret; |
| |
| /* initialize USB buffers: */ |
| line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL); |
| if (!line6->buffer_listen) |
| return -ENOMEM; |
| |
| line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL); |
| if (!line6->urb_listen) |
| return -ENOMEM; |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) { |
| line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL); |
| if (!line6->buffer_message) |
| return -ENOMEM; |
| |
| ret = line6_init_midi(line6); |
| if (ret < 0) |
| return ret; |
| } else { |
| ret = line6_hwdep_init(line6); |
| if (ret < 0) |
| return ret; |
| } |
| |
| ret = line6_start_listen(line6); |
| if (ret < 0) { |
| dev_err(line6->ifcdev, "cannot start listening: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| Probe USB device. |
| */ |
| int line6_probe(struct usb_interface *interface, |
| const struct usb_device_id *id, |
| const char *driver_name, |
| const struct line6_properties *properties, |
| int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), |
| size_t data_size) |
| { |
| struct usb_device *usbdev = interface_to_usbdev(interface); |
| struct snd_card *card; |
| struct usb_line6 *line6; |
| int interface_number; |
| int ret; |
| |
| if (WARN_ON(data_size < sizeof(*line6))) |
| return -EINVAL; |
| |
| /* we don't handle multiple configurations */ |
| if (usbdev->descriptor.bNumConfigurations != 1) |
| return -ENODEV; |
| |
| ret = snd_card_new(&interface->dev, |
| SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, |
| THIS_MODULE, data_size, &card); |
| if (ret < 0) |
| return ret; |
| |
| /* store basic data: */ |
| line6 = card->private_data; |
| line6->card = card; |
| line6->properties = properties; |
| line6->usbdev = usbdev; |
| line6->ifcdev = &interface->dev; |
| |
| strcpy(card->id, properties->id); |
| strcpy(card->driver, driver_name); |
| strcpy(card->shortname, properties->name); |
| sprintf(card->longname, "Line 6 %s at USB %s", properties->name, |
| dev_name(line6->ifcdev)); |
| card->private_free = line6_destruct; |
| |
| usb_set_intfdata(interface, line6); |
| |
| /* increment reference counters: */ |
| usb_get_dev(usbdev); |
| |
| /* initialize device info: */ |
| dev_info(&interface->dev, "Line 6 %s found\n", properties->name); |
| |
| /* query interface number */ |
| interface_number = interface->cur_altsetting->desc.bInterfaceNumber; |
| |
| /* TODO reserves the bus bandwidth even without actual transfer */ |
| ret = usb_set_interface(usbdev, interface_number, |
| properties->altsetting); |
| if (ret < 0) { |
| dev_err(&interface->dev, "set_interface failed\n"); |
| goto error; |
| } |
| |
| line6_get_usb_properties(line6); |
| |
| if (properties->capabilities & LINE6_CAP_CONTROL) { |
| ret = line6_init_cap_control(line6); |
| if (ret < 0) |
| goto error; |
| } |
| |
| /* initialize device data based on device: */ |
| ret = private_init(line6, id); |
| if (ret < 0) |
| goto error; |
| |
| /* creation of additional special files should go here */ |
| |
| dev_info(&interface->dev, "Line 6 %s now attached\n", |
| properties->name); |
| |
| return 0; |
| |
| error: |
| /* we can call disconnect callback here because no close-sync is |
| * needed yet at this point |
| */ |
| line6_disconnect(interface); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(line6_probe); |
| |
| /* |
| Line 6 device disconnected. |
| */ |
| void line6_disconnect(struct usb_interface *interface) |
| { |
| struct usb_line6 *line6 = usb_get_intfdata(interface); |
| struct usb_device *usbdev = interface_to_usbdev(interface); |
| |
| if (!line6) |
| return; |
| |
| if (WARN_ON(usbdev != line6->usbdev)) |
| return; |
| |
| if (line6->urb_listen != NULL) |
| line6_stop_listen(line6); |
| |
| snd_card_disconnect(line6->card); |
| if (line6->line6pcm) |
| line6_pcm_disconnect(line6->line6pcm); |
| if (line6->disconnect) |
| line6->disconnect(line6); |
| |
| dev_info(&interface->dev, "Line 6 %s now disconnected\n", |
| line6->properties->name); |
| |
| /* make sure the device isn't destructed twice: */ |
| usb_set_intfdata(interface, NULL); |
| |
| snd_card_free_when_closed(line6->card); |
| } |
| EXPORT_SYMBOL_GPL(line6_disconnect); |
| |
| #ifdef CONFIG_PM |
| |
| /* |
| Suspend Line 6 device. |
| */ |
| int line6_suspend(struct usb_interface *interface, pm_message_t message) |
| { |
| struct usb_line6 *line6 = usb_get_intfdata(interface); |
| struct snd_line6_pcm *line6pcm = line6->line6pcm; |
| |
| snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot); |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL) |
| line6_stop_listen(line6); |
| |
| if (line6pcm != NULL) { |
| snd_pcm_suspend_all(line6pcm->pcm); |
| line6pcm->flags = 0; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(line6_suspend); |
| |
| /* |
| Resume Line 6 device. |
| */ |
| int line6_resume(struct usb_interface *interface) |
| { |
| struct usb_line6 *line6 = usb_get_intfdata(interface); |
| |
| if (line6->properties->capabilities & LINE6_CAP_CONTROL) |
| line6_start_listen(line6); |
| |
| snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(line6_resume); |
| |
| #endif /* CONFIG_PM */ |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |