| /* |
| * Samsung EXYNOS SoC series MIPI CSI/DSI D/C-PHY driver |
| * |
| * Copyright (C) 2018 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <soc/samsung/exynos-pmu.h> |
| |
| /* the maximum number of PHY for each module */ |
| #define EXYNOS_MIPI_PHYS_NUM 4 |
| |
| #define EXYNOS_MIPI_PHY_ISO_BYPASS (1 << 0) |
| |
| #define MIPI_PHY_MxSx_UNIQUE (0 << 1) |
| #define MIPI_PHY_MxSx_SHARED (1 << 1) |
| #define MIPI_PHY_MxSx_INIT_DONE (2 << 1) |
| |
| enum exynos_mipi_phy_owner { |
| EXYNOS_MIPI_PHY_OWNER_DSIM = 0, |
| EXYNOS_MIPI_PHY_OWNER_CSIS = 1, |
| }; |
| |
| /* per MIPI-PHY module */ |
| struct exynos_mipi_phy_data { |
| u8 flags; |
| int active_count; |
| spinlock_t slock; |
| }; |
| |
| #define MKVER(ma, mi) (((ma) << 16) | (mi)) |
| enum phy_infos { |
| VERSION, |
| TYPE, |
| LANES, |
| SPEED, |
| SETTLE, |
| }; |
| |
| struct exynos_mipi_phy_cfg { |
| u16 major; |
| u16 minor; |
| u16 mode; |
| /* u32 max_speed */ |
| int (*set)(void __iomem *regs, int option, u32 *info); |
| }; |
| |
| /* per DT MIPI-PHY node, can have multiple elements */ |
| struct exynos_mipi_phy { |
| struct device *dev; |
| spinlock_t slock; |
| struct regmap *reg_pmu; |
| struct regmap *reg_reset; |
| enum exynos_mipi_phy_owner owner; |
| struct mipi_phy_desc { |
| struct phy *phy; |
| struct exynos_mipi_phy_data *data; |
| unsigned int index; |
| unsigned int iso_offset; |
| unsigned int rst_bit; |
| void __iomem *regs; |
| } phys[EXYNOS_MIPI_PHYS_NUM]; |
| }; |
| |
| /* 1: Isolation bypass, 0: Isolation enable */ |
| static int __set_phy_isolation(struct regmap *reg_pmu, |
| unsigned int offset, unsigned int on) |
| { |
| unsigned int val; |
| int ret; |
| |
| val = on ? EXYNOS_MIPI_PHY_ISO_BYPASS : 0; |
| |
| if (reg_pmu) |
| ret = regmap_update_bits(reg_pmu, offset, |
| EXYNOS_MIPI_PHY_ISO_BYPASS, val); |
| else |
| ret = exynos_pmu_update(offset, |
| EXYNOS_MIPI_PHY_ISO_BYPASS, val); |
| |
| if (ret) |
| pr_err("%s failed to %s PHY isolation 0x%x\n", |
| __func__, on ? "set" : "clear", offset); |
| |
| pr_debug("%s off=0x%x, val=0x%x\n", __func__, offset, val); |
| |
| return ret; |
| } |
| |
| /* 1: Enable reset -> release reset, 0: Enable reset */ |
| static int __set_phy_reset(struct regmap *reg_reset, |
| unsigned int bit, unsigned int on) |
| { |
| unsigned int cfg; |
| int ret = 0; |
| |
| if (!reg_reset) |
| return 0; |
| |
| ret = regmap_update_bits(reg_reset, 0, BIT(bit), 0); |
| if (ret) |
| pr_err("%s failed to reset PHY(%d)\n", __func__, bit); |
| |
| if (on) { |
| ret = regmap_update_bits(reg_reset, 0, BIT(bit), BIT(bit)); |
| if (ret) |
| pr_err("%s failed to release reset PHY(%d)\n", |
| __func__, bit); |
| } |
| |
| regmap_read(reg_reset, 0, &cfg); |
| pr_debug("%s bit=%d, cfg=0x%x\n", __func__, bit, cfg); |
| |
| return ret; |
| } |
| |
| static int __set_phy_init(struct exynos_mipi_phy *state, |
| struct mipi_phy_desc *phy_desc, unsigned int on) |
| { |
| unsigned int cfg; |
| int ret = 0; |
| |
| if (state->reg_pmu) |
| ret = regmap_read(state->reg_pmu, |
| phy_desc->iso_offset, &cfg); |
| else |
| ret = exynos_pmu_read(phy_desc->iso_offset, &cfg); |
| |
| if (ret) { |
| dev_err(state->dev, "%s Can't read 0x%x\n", |
| __func__, phy_desc->iso_offset); |
| ret = -EINVAL; |
| goto phy_exit; |
| } |
| |
| /* Add INIT_DONE flag when ISO is already bypass(LCD_ON_UBOOT) */ |
| if (cfg && EXYNOS_MIPI_PHY_ISO_BYPASS) |
| phy_desc->data->flags |= MIPI_PHY_MxSx_INIT_DONE; |
| |
| phy_exit: |
| return ret; |
| } |
| |
| static int __set_phy_alone(struct exynos_mipi_phy *state, |
| struct mipi_phy_desc *phy_desc, unsigned int on) |
| { |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&state->slock, flags); |
| |
| if (on) { |
| ret = __set_phy_isolation(state->reg_pmu, |
| phy_desc->iso_offset, on); |
| if (ret) |
| goto phy_exit; |
| |
| ret = __set_phy_reset(state->reg_reset, |
| phy_desc->rst_bit, on); |
| } else { |
| ret = __set_phy_reset(state->reg_reset, |
| phy_desc->rst_bit, on); |
| if (ret) |
| goto phy_exit; |
| |
| ret = __set_phy_isolation(state->reg_pmu, |
| phy_desc->iso_offset, on); |
| } |
| |
| phy_exit: |
| pr_debug("%s: isolation 0x%x, reset 0x%x\n", __func__, |
| phy_desc->iso_offset, phy_desc->rst_bit); |
| |
| spin_unlock_irqrestore(&state->slock, flags); |
| |
| return ret; |
| } |
| |
| static int __set_phy_share(struct exynos_mipi_phy *state, |
| struct mipi_phy_desc *phy_desc, unsigned int on) |
| { |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&phy_desc->data->slock, flags); |
| |
| on ? ++(phy_desc->data->active_count) : --(phy_desc->data->active_count); |
| |
| /* If phy is already initialization(power_on) */ |
| if (state->owner == EXYNOS_MIPI_PHY_OWNER_DSIM && |
| phy_desc->data->flags & MIPI_PHY_MxSx_INIT_DONE) { |
| phy_desc->data->flags &= (~MIPI_PHY_MxSx_INIT_DONE); |
| spin_unlock_irqrestore(&phy_desc->data->slock, flags); |
| return ret; |
| } |
| |
| if (on) { |
| /* Isolation bypass when reference count is 1 */ |
| if (phy_desc->data->active_count) { |
| ret = __set_phy_isolation(state->reg_pmu, |
| phy_desc->iso_offset, on); |
| if (ret) |
| goto phy_exit; |
| } |
| |
| ret = __set_phy_reset(state->reg_reset, |
| phy_desc->rst_bit, on); |
| } else { |
| ret = __set_phy_reset(state->reg_reset, |
| phy_desc->rst_bit, on); |
| if (ret) |
| goto phy_exit; |
| |
| /* Isolation enabled when reference count is zero */ |
| if (phy_desc->data->active_count == 0) |
| ret = __set_phy_isolation(state->reg_pmu, |
| phy_desc->iso_offset, on); |
| } |
| |
| phy_exit: |
| pr_debug("%s: isolation 0x%x, reset 0x%x\n", __func__, |
| phy_desc->iso_offset, phy_desc->rst_bit); |
| |
| spin_unlock_irqrestore(&phy_desc->data->slock, flags); |
| |
| return ret; |
| } |
| |
| static int __set_phy_state(struct exynos_mipi_phy *state, |
| struct mipi_phy_desc *phy_desc, unsigned int on) |
| { |
| int ret = 0; |
| |
| if (phy_desc->data->flags & MIPI_PHY_MxSx_SHARED) |
| ret = __set_phy_share(state, phy_desc, on); |
| else |
| ret = __set_phy_alone(state, phy_desc, on); |
| |
| return ret; |
| } |
| |
| static void update_bits(void __iomem *addr, unsigned int start, |
| unsigned int width, unsigned int val) |
| { |
| unsigned int cfg; |
| unsigned int mask = (width >= 32) ? 0xffffffff : ((1U << width) - 1); |
| |
| cfg = readl(addr); |
| cfg &= ~(mask << start); |
| cfg |= ((val & mask) << start); |
| writel(cfg, addr); |
| } |
| |
| #define PHY_REF_SPEED (1500) |
| static int __set_phy_cfg_0501_0000_dphy(void __iomem *regs, int option, u32 *cfg) |
| { |
| |
| int i; |
| u32 skew_cal_en = 0; |
| u32 skew_delay_sel = 0; |
| u32 hs_mode_sel = 1; |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED) { |
| skew_cal_en = 1; |
| |
| if (cfg[SPEED] >= 3000) |
| skew_delay_sel = 1; |
| else if (cfg[SPEED] >= 2000) |
| skew_delay_sel = 2; |
| else |
| skew_delay_sel = 3; |
| |
| hs_mode_sel = 0; |
| } |
| |
| writel(0x2, regs + 0x0018); |
| update_bits(regs + 0x0084, 0, 8, 0x1); |
| for (i = 0; i <= cfg[LANES]; i++) { |
| update_bits(regs + 0x04e0 + (i * 0x400), 0, 1, skew_cal_en); |
| update_bits(regs + 0x043c + (i * 0x400), 5, 2, skew_delay_sel); |
| update_bits(regs + 0x04ac + (i * 0x400), 2, 1, hs_mode_sel); |
| update_bits(regs + 0x04b0 + (i * 0x400), 0, 8, cfg[SETTLE]); |
| } |
| |
| return 0; |
| } |
| |
| static int __set_phy_cfg_0502_0000_dphy(void __iomem *regs, int option, u32 *cfg) |
| { |
| |
| int i; |
| u32 settle_clk_sel = 1; |
| u32 skew_delay_sel = 0; |
| u32 type = cfg[TYPE] & 0xffff; |
| u32 skew_cal_en = 0; |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED) { |
| settle_clk_sel = 0; |
| skew_cal_en = 1; |
| } |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED && cfg[SPEED] < 4000) { |
| if (cfg[SPEED] >= 3000) |
| skew_delay_sel = 1; |
| else if (cfg[SPEED] >= 2000) |
| skew_delay_sel = 2; |
| else |
| skew_delay_sel = 3; |
| } |
| |
| writel(0x00000001, regs + 0x0000); /* SC_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0004); /* SC_GNR_CON1 */ |
| writel(0x00000004, regs + 0x0008); /* SC_ANA_CON0 */ |
| writel(0x00009000, regs + 0x000c); /* SC_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0010); /* SC_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0014); /* SC_ANA_CON3 */ |
| writel(0x00000301, regs + 0x0030); /* SC_TIME_CON0 */ |
| |
| for (i = 0; i <= cfg[LANES]; i++) { |
| writel(0x00000001, regs + 0x0100 + (i * 0x100)); /* SD_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0104 + (i * 0x100)); /* SD_GNR_CON1 */ |
| writel(0x00000004, regs + 0x0108 + (i * 0x100)); /* SD_ANA_CON0 */ |
| writel(0x00009000, regs + 0x010c + (i * 0x100)); /* SD_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0110 + (i * 0x100)); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0110 + (i * 0x100), 8, 2, skew_delay_sel); /* SD_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0114 + (i * 0x100)); /* SD_ANA_CON3 */ |
| /* DC Combo lane has below SFR (0/1/2) */ |
| if ((type == 0xDC) && (i < 3)) |
| writel(0x00000040, regs + 0x0124 + (i * 0x100)); /* SD_ANA_CON7 */ |
| update_bits(regs + 0x0130 + (i * 0x100), 0, 8, cfg[SETTLE]); /* SD_TIME_CON0 */ |
| update_bits(regs + 0x0130 + (i * 0x100), 8, 1, settle_clk_sel); /* SD_TIME_CON0 */ |
| writel(0x00000003, regs + 0x0134 + (i * 0x100)); /* SD_TIME_CON1 */ |
| update_bits(regs + 0x0140 + (i * 0x100), 0, 1, skew_cal_en); /* SD_DESKEW_CON0 */ |
| writel(0x0000081a, regs + 0x0150 + (i * 0x100)); /* SD_DESKEW_CON4 */ |
| } |
| |
| return 0; |
| } |
| |
| static int __set_phy_cfg_0502_0001_dphy(void __iomem *regs, int option, u32 *cfg) |
| { |
| |
| int i; |
| u32 settle_clk_sel = 1; |
| u32 skew_delay_sel = 0; |
| u32 skew_cal_en = 0; |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED) { |
| settle_clk_sel = 0; |
| skew_cal_en = 1; |
| } |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED && cfg[SPEED] < 4000) { |
| if (cfg[SPEED] >= 3000) |
| skew_delay_sel = 1; |
| else if (cfg[SPEED] >= 2000) |
| skew_delay_sel = 2; |
| else |
| skew_delay_sel = 3; |
| } |
| |
| writel(0x00000001, regs + 0x0500); /* SC_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0504); /* SC_GNR_CON1 */ |
| writel(0x00000004, regs + 0x0508); /* SC_ANA_CON0 */ |
| writel(0x00009000, regs + 0x050c); /* SC_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0510); /* SC_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0514); /* SC_ANA_CON3 */ |
| writel(0x00000301, regs + 0x0530); /* SC_TIME_CON0 */ |
| |
| for (i = 0; i <= cfg[LANES]; i++) { |
| writel(0x00000001, regs + 0x0000 + (i * 0x100)); /* SD_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0004 + (i * 0x100)); /* SD_GNR_CON1 */ |
| writel(0x00000004, regs + 0x0008 + (i * 0x100)); /* SD_ANA_CON0 */ |
| writel(0x00009000, regs + 0x000c + (i * 0x100)); /* SD_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0010 + (i * 0x100)); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0010 + (i * 0x100), 8, 2, skew_delay_sel); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0010 + (i * 0x100), 15, 1, 1); /* RESETN_CFG_SEL */ |
| update_bits(regs + 0x0010 + (i * 0x100), 7, 1, 1); /* RXDDRCLKHS_SEL */ |
| writel(0x00000600, regs + 0x0014 + (i * 0x100)); /* SD_ANA_CON3 */ |
| update_bits(regs + 0x0030 + (i * 0x100), 0, 8, cfg[SETTLE]); /* SD_TIME_CON0 */ |
| update_bits(regs + 0x0030 + (i * 0x100), 8, 1, settle_clk_sel); /* SD_TIME_CON0 */ |
| writel(0x00000003, regs + 0x0034 + (i * 0x100)); /* SD_TIME_CON1 */ |
| update_bits(regs + 0x0040 + (i * 0x100), 0, 1, skew_cal_en); /* SD_DESKEW_CON0 */ |
| writel(0x0000081a, regs + 0x0050 + (i * 0x100)); /* SD_DESKEW_CON4 */ |
| } |
| |
| return 0; |
| } |
| |
| static int __set_phy_cfg_0502_0002_dphy(void __iomem *regs, int option, u32 *cfg) |
| { |
| int i; |
| u32 settle_clk_sel = 1; |
| u32 skew_delay_sel = 0; |
| u32 type = cfg[TYPE] & 0xffff; |
| u32 t_clk_miss = 3; |
| u32 freq_s_xi_c = 26; /* MHz */ |
| u32 clk_div1234_mc; |
| u32 skew_cal_en = 0; |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED) { |
| settle_clk_sel = 0; |
| skew_cal_en = 1; |
| } |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED && cfg[SPEED] < 4000) { |
| if (cfg[SPEED] >= 3000) |
| skew_delay_sel = 1; |
| else if (cfg[SPEED] >= 2000) |
| skew_delay_sel = 2; |
| else |
| skew_delay_sel = 3; |
| } |
| |
| writel(0x00000001, regs + 0x0000); /* SC_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0004); /* SC_GNR_CON1 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00000000, regs + 0x0008); /* SC_ANA_CON0 */ |
| else |
| writel(0x00000004, regs + 0x0008); /* SC_ANA_CON0 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00008000, regs + 0x000c); /* SC_ANA_CON1 */ |
| else |
| writel(0x00009000, regs + 0x000c); /* SC_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0010); /* SC_ANA_CON2 */ |
| clk_div1234_mc = max(0, (int)(5 - DIV_ROUND_UP(((t_clk_miss - 1) * cfg[SPEED]) >> 2, freq_s_xi_c))); |
| update_bits(regs + 0x0010, 8, 2, clk_div1234_mc); /* SC_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0014); /* SC_ANA_CON3 */ |
| writel(0x00000301, regs + 0x0030); /* SC_TIME_CON0 */ |
| |
| for (i = 0; i <= cfg[LANES]; i++) { |
| writel(0x00000001, regs + 0x0100 + (i * 0x100)); /* SD_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0104 + (i * 0x100)); /* SD_GNR_CON1 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00000000, regs + 0x0108 + (i * 0x100)); /* SD_ANA_CON0 */ |
| else |
| writel(0x00000004, regs + 0x0108 + (i * 0x100)); /* SD_ANA_CON0 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00008260, regs + 0x010c + (i * 0x100)); /* SD_ANA_CON1 */ |
| else if (cfg[SPEED] == 4500) |
| writel(0x00009260, regs + 0x010c + (i * 0x100)); /* SD_ANA_CON1 */ |
| else |
| writel(0x00009000, regs + 0x010c + (i * 0x100)); /* SD_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0110 + (i * 0x100)); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0110 + (i * 0x100), 8, 2, skew_delay_sel); /* SD_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0114 + (i * 0x100)); /* SD_ANA_CON3 */ |
| /* DC Combo lane has below SFR (0/1/2) */ |
| if ((type == 0xDC) && (i < 3)) |
| writel(0x00000040, regs + 0x0124 + (i * 0x100)); /* SD_ANA_CON7 */ |
| update_bits(regs + 0x0130 + (i * 0x100), 0, 8, cfg[SETTLE]); /* SD_TIME_CON0 */ |
| update_bits(regs + 0x0130 + (i * 0x100), 8, 1, settle_clk_sel); /* SD_TIME_CON0 */ |
| writel(0x00000003, regs + 0x0134 + (i * 0x100)); /* SD_TIME_CON1 */ |
| update_bits(regs + 0x0140 + (i * 0x100), 0, 1, skew_cal_en); /* SD_DESKEW_CON0 */ |
| writel(0x0000081a, regs + 0x0150 + (i * 0x100)); /* SD_DESKEW_CON4 */ |
| } |
| |
| return 0; |
| } |
| |
| static int __set_phy_cfg_0502_0003_dphy(void __iomem *regs, int option, u32 *cfg) |
| { |
| int i; |
| u32 settle_clk_sel = 1; |
| u32 skew_delay_sel = 0; |
| u32 t_clk_miss = 3; |
| u32 freq_s_xi_c = 26; /* MHz */ |
| u32 clk_div1234_mc; |
| u32 skew_cal_en = 0; |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED) { |
| settle_clk_sel = 0; |
| skew_cal_en = 1; |
| } |
| |
| if (cfg[SPEED] >= PHY_REF_SPEED && cfg[SPEED] < 4000) { |
| if (cfg[SPEED] >= 3000) |
| skew_delay_sel = 1; |
| else if (cfg[SPEED] >= 2000) |
| skew_delay_sel = 2; |
| else |
| skew_delay_sel = 3; |
| } |
| |
| writel(0x00000001, regs + 0x0500); /* SC_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0504); /* SC_GNR_CON1 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00000000, regs + 0x0508); /* SC_ANA_CON0 */ |
| else |
| writel(0x00000004, regs + 0x0508); /* SC_ANA_CON0 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00008000, regs + 0x050c); /* SC_ANA_CON1 */ |
| else |
| writel(0x00009000, regs + 0x050c); /* SC_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0510); /* SC_ANA_CON2 */ |
| clk_div1234_mc = max(0, (int)(5 - DIV_ROUND_UP(((t_clk_miss - 1) * cfg[SPEED]) >> 2, freq_s_xi_c))); |
| update_bits(regs + 0x0510, 8, 2, clk_div1234_mc); /* SC_ANA_CON2 */ |
| writel(0x00000600, regs + 0x0514); /* SC_ANA_CON3 */ |
| writel(0x00000301, regs + 0x0530); /* SC_TIME_CON0 */ |
| |
| for (i = 0; i <= cfg[LANES]; i++) { |
| writel(0x00000001, regs + 0x0000 + (i * 0x100)); /* SD_GNR_CON0 */ |
| writel(0x00001450, regs + 0x0004 + (i * 0x100)); /* SD_GNR_CON1 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00000000, regs + 0x0008 + (i * 0x100)); /* SD_ANA_CON0 */ |
| else |
| writel(0x00000004, regs + 0x0008 + (i * 0x100)); /* SD_ANA_CON0 */ |
| if (cfg[SPEED] > 4500) |
| writel(0x00008260, regs + 0x000c + (i * 0x100)); /* SD_ANA_CON1 */ |
| else if (cfg[SPEED] == 4500) |
| writel(0x00009260, regs + 0x000c + (i * 0x100)); /* SD_ANA_CON1 */ |
| else |
| writel(0x00009000, regs + 0x000c + (i * 0x100)); /* SD_ANA_CON1 */ |
| writel(0x00000005, regs + 0x0010 + (i * 0x100)); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0010 + (i * 0x100), 8, 2, skew_delay_sel); /* SD_ANA_CON2 */ |
| update_bits(regs + 0x0010 + (i * 0x100), 15, 1, 1); /* RESETN_CFG_SEL */ |
| update_bits(regs + 0x0010 + (i * 0x100), 7, 1, 1); /* RXDDRCLKHS_SEL */ |
| writel(0x00000600, regs + 0x0014 + (i * 0x100)); /* SD_ANA_CON3 */ |
| update_bits(regs + 0x0030 + (i * 0x100), 0, 8, cfg[SETTLE]); /* SD_TIME_CON0 */ |
| update_bits(regs + 0x0030 + (i * 0x100), 8, 1, settle_clk_sel); /* SD_TIME_CON0 */ |
| writel(0x00000003, regs + 0x0034 + (i * 0x100)); /* SD_TIME_CON1 */ |
| update_bits(regs + 0x0040 + (i * 0x100), 0, 1, skew_cal_en); /* SD_DESKEW_CON0 */ |
| writel(0x0000081a, regs + 0x0050 + (i * 0x100)); /* SD_DESKEW_CON4 */ |
| } |
| |
| return 0; |
| } |
| |
| |
| static const struct exynos_mipi_phy_cfg phy_cfg_table[] = { |
| { |
| .major = 0x0501, |
| .minor = 0x0000, |
| .mode = 0xD, |
| .set = __set_phy_cfg_0501_0000_dphy, |
| }, |
| { |
| .major = 0x0502, |
| .minor = 0x0000, |
| .mode = 0xD, |
| .set = __set_phy_cfg_0502_0000_dphy, |
| }, |
| { |
| .major = 0x0502, |
| .minor = 0x0001, |
| .mode = 0xD, |
| .set = __set_phy_cfg_0502_0001_dphy, |
| }, |
| { |
| .major = 0x0502, |
| .minor = 0x0002, |
| .mode = 0xD, |
| .set = __set_phy_cfg_0502_0002_dphy, |
| }, |
| { |
| .major = 0x0502, |
| .minor = 0x0003, |
| .mode = 0xD, |
| .set = __set_phy_cfg_0502_0003_dphy, |
| }, |
| { }, |
| }; |
| |
| static int __set_phy_cfg(struct exynos_mipi_phy *state, |
| struct mipi_phy_desc *phy_desc, int option, void *info) |
| { |
| u32 *cfg = (u32 *)info; |
| unsigned long i; |
| int ret = -EINVAL; |
| |
| for (i = 0; i < ARRAY_SIZE(phy_cfg_table); i++) { |
| if ((cfg[VERSION] == MKVER(phy_cfg_table[i].major, |
| phy_cfg_table[i].minor)) |
| && ((cfg[TYPE] >> 16) == phy_cfg_table[i].mode)) { |
| ret = phy_cfg_table[i].set(phy_desc->regs, |
| option, cfg); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static struct exynos_mipi_phy_data mipi_phy_m4s4_top = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m4s4_top.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m4s4_mod = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m4s4_mod.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m4s4s4 = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m4s4s4.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m4s0 = { |
| .flags = MIPI_PHY_MxSx_UNIQUE, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m4s0.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m2s4s4s2 = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m2s4s4s2.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m1s2s2 = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m1s2s2.slock), |
| }; |
| |
| static struct exynos_mipi_phy_data mipi_phy_m0s4s4s4_mod = { |
| .flags = MIPI_PHY_MxSx_SHARED, |
| .active_count = 0, |
| .slock = __SPIN_LOCK_UNLOCKED(mipi_phy_m0s4s4s4.slock), |
| }; |
| |
| static const struct of_device_id exynos_mipi_phy_of_table[] = { |
| { |
| .compatible = "samsung,mipi-phy-m4s4-top", |
| .data = &mipi_phy_m4s4_top, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m4s4-mod", |
| .data = &mipi_phy_m4s4_mod, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m4s4s4", |
| .data = &mipi_phy_m4s4s4, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m4s0", |
| .data = &mipi_phy_m4s0, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m2s4s4s2", |
| .data = &mipi_phy_m2s4s4s2, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m1s2s2", |
| .data = &mipi_phy_m1s2s2, |
| }, |
| { |
| .compatible = "samsung,mipi-phy-m0s4s4s4-mod", |
| .data = &mipi_phy_m0s4s4s4_mod, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_mipi_phy_of_table); |
| |
| #define to_mipi_video_phy(desc) \ |
| container_of((desc), struct exynos_mipi_phy, phys[(desc)->index]) |
| |
| static int exynos_mipi_phy_init(struct phy *phy) |
| { |
| struct mipi_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_init(state, phy_desc, 1); |
| } |
| |
| static int exynos_mipi_phy_power_on(struct phy *phy) |
| { |
| struct mipi_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_state(state, phy_desc, 1); |
| } |
| |
| static int exynos_mipi_phy_power_off(struct phy *phy) |
| { |
| struct mipi_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_state(state, phy_desc, 0); |
| } |
| |
| static int exynos_mipi_phy_set(struct phy *phy, int option, void *info) |
| { |
| struct mipi_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_cfg(state, phy_desc, option, info); |
| } |
| |
| static struct phy *exynos_mipi_phy_of_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct exynos_mipi_phy *state = dev_get_drvdata(dev); |
| |
| if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM)) |
| return ERR_PTR(-ENODEV); |
| |
| return state->phys[args->args[0]].phy; |
| } |
| |
| static struct phy_ops exynos_mipi_phy_ops = { |
| .init = exynos_mipi_phy_init, |
| .power_on = exynos_mipi_phy_power_on, |
| .power_off = exynos_mipi_phy_power_off, |
| .set = exynos_mipi_phy_set, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int exynos_mipi_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct exynos_mipi_phy *state; |
| struct phy_provider *phy_provider; |
| struct exynos_mipi_phy_data *phy_data; |
| const struct of_device_id *of_id; |
| unsigned int iso[EXYNOS_MIPI_PHYS_NUM]; |
| unsigned int rst[EXYNOS_MIPI_PHYS_NUM]; |
| struct resource *res; |
| unsigned int i; |
| int ret = 0, elements = 0; |
| |
| state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->dev = &pdev->dev; |
| |
| of_id = of_match_device(of_match_ptr(exynos_mipi_phy_of_table), dev); |
| if (!of_id) |
| return -EINVAL; |
| |
| phy_data = (struct exynos_mipi_phy_data *)of_id->data; |
| |
| dev_set_drvdata(dev, state); |
| spin_lock_init(&state->slock); |
| |
| /* PMU isolation (optional) */ |
| state->reg_pmu = syscon_regmap_lookup_by_phandle(node, |
| "samsung,pmu-syscon"); |
| if (IS_ERR(state->reg_pmu)) { |
| dev_err(dev, "failed to lookup PMU regmap, use PMU interface\n"); |
| state->reg_pmu = NULL; |
| } |
| |
| elements = of_property_count_u32_elems(node, "isolation"); |
| if ((elements < 0) || (elements > EXYNOS_MIPI_PHYS_NUM)) |
| return -EINVAL; |
| |
| ret = of_property_read_u32_array(node, "isolation", iso, |
| elements); |
| if (ret) { |
| dev_err(dev, "cannot get PHY isolation offset\n"); |
| return ret; |
| } |
| |
| /* SYSREG reset (optional) */ |
| state->reg_reset = syscon_regmap_lookup_by_phandle(node, |
| "samsung,reset-sysreg"); |
| if (IS_ERR(state->reg_reset)) { |
| state->reg_reset = NULL; |
| } else { |
| ret = of_property_read_u32_array(node, "reset", rst, elements); |
| if (ret) { |
| dev_err(dev, "cannot get PHY reset bit\n"); |
| return ret; |
| } |
| } |
| |
| of_property_read_u32(node, "owner", &state->owner); |
| |
| for (i = 0; i < elements; i++) { |
| state->phys[i].iso_offset = iso[i]; |
| state->phys[i].rst_bit = rst[i]; |
| dev_info(dev, "%s: isolation 0x%x\n", __func__, |
| state->phys[i].iso_offset); |
| if (state->reg_reset) |
| dev_info(dev, "%s: reset %d\n", __func__, |
| state->phys[i].rst_bit); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| if (res) { |
| state->phys[i].regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(state->phys[i].regs)) |
| return PTR_ERR(state->phys[i].regs); |
| } |
| } |
| |
| for (i = 0; i < elements; i++) { |
| struct phy *generic_phy = devm_phy_create(dev, NULL, |
| &exynos_mipi_phy_ops); |
| if (IS_ERR(generic_phy)) { |
| dev_err(dev, "failed to create PHY\n"); |
| return PTR_ERR(generic_phy); |
| } |
| |
| state->phys[i].index = i; |
| state->phys[i].phy = generic_phy; |
| state->phys[i].data = phy_data; |
| phy_set_drvdata(generic_phy, &state->phys[i]); |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, |
| exynos_mipi_phy_of_xlate); |
| |
| if (IS_ERR(phy_provider)) |
| dev_err(dev, "failed to create exynos mipi-phy\n"); |
| else |
| dev_err(dev, "creating exynos-mipi-phy\n"); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver exynos_mipi_phy_driver = { |
| .probe = exynos_mipi_phy_probe, |
| .driver = { |
| .name = "exynos-mipi-phy", |
| .of_match_table = of_match_ptr(exynos_mipi_phy_of_table), |
| .suppress_bind_attrs = true, |
| } |
| }; |
| module_platform_driver(exynos_mipi_phy_driver); |
| |
| MODULE_DESCRIPTION("Samsung EXYNOS SoC MIPI CSI/DSI D/C-PHY driver"); |
| MODULE_LICENSE("GPL v2"); |