| VERSION = 2 |
| PATCHLEVEL = 6 |
| SUBLEVEL = 13 |
| EXTRAVERSION =-rc2 |
| NAME=Woozy Numbat |
| |
| # *DOCUMENTATION* |
| # To see a list of typical targets execute "make help" |
| # More info can be located in ./README |
| # Comments in this file are targeted only to the developer, do not |
| # expect to learn how to build the kernel reading this file. |
| |
| # Do not print "Entering directory ..." |
| MAKEFLAGS += --no-print-directory |
| |
| # We are using a recursive build, so we need to do a little thinking |
| # to get the ordering right. |
| # |
| # Most importantly: sub-Makefiles should only ever modify files in |
| # their own directory. If in some directory we have a dependency on |
| # a file in another dir (which doesn't happen often, but it's often |
| # unavoidable when linking the built-in.o targets which finally |
| # turn into vmlinux), we will call a sub make in that other dir, and |
| # after that we are sure that everything which is in that other dir |
| # is now up to date. |
| # |
| # The only cases where we need to modify files which have global |
| # effects are thus separated out and done before the recursive |
| # descending is started. They are now explicitly listed as the |
| # prepare rule. |
| |
| # To put more focus on warnings, be less verbose as default |
| # Use 'make V=1' to see the full commands |
| |
| ifdef V |
| ifeq ("$(origin V)", "command line") |
| KBUILD_VERBOSE = $(V) |
| endif |
| endif |
| ifndef KBUILD_VERBOSE |
| KBUILD_VERBOSE = 0 |
| endif |
| |
| # Call sparse as part of compilation of C files |
| # Use 'make C=1' to enable sparse checking |
| |
| ifdef C |
| ifeq ("$(origin C)", "command line") |
| KBUILD_CHECKSRC = $(C) |
| endif |
| endif |
| ifndef KBUILD_CHECKSRC |
| KBUILD_CHECKSRC = 0 |
| endif |
| |
| # Use make M=dir to specify directory of external module to build |
| # Old syntax make ... SUBDIRS=$PWD is still supported |
| # Setting the environment variable KBUILD_EXTMOD take precedence |
| ifdef SUBDIRS |
| KBUILD_EXTMOD ?= $(SUBDIRS) |
| endif |
| ifdef M |
| ifeq ("$(origin M)", "command line") |
| KBUILD_EXTMOD := $(M) |
| endif |
| endif |
| |
| |
| # kbuild supports saving output files in a separate directory. |
| # To locate output files in a separate directory two syntaxes are supported. |
| # In both cases the working directory must be the root of the kernel src. |
| # 1) O= |
| # Use "make O=dir/to/store/output/files/" |
| # |
| # 2) Set KBUILD_OUTPUT |
| # Set the environment variable KBUILD_OUTPUT to point to the directory |
| # where the output files shall be placed. |
| # export KBUILD_OUTPUT=dir/to/store/output/files/ |
| # make |
| # |
| # The O= assignment takes precedence over the KBUILD_OUTPUT environment |
| # variable. |
| |
| |
| # KBUILD_SRC is set on invocation of make in OBJ directory |
| # KBUILD_SRC is not intended to be used by the regular user (for now) |
| ifeq ($(KBUILD_SRC),) |
| |
| # OK, Make called in directory where kernel src resides |
| # Do we want to locate output files in a separate directory? |
| ifdef O |
| ifeq ("$(origin O)", "command line") |
| KBUILD_OUTPUT := $(O) |
| endif |
| endif |
| |
| # That's our default target when none is given on the command line |
| .PHONY: _all |
| _all: |
| |
| ifneq ($(KBUILD_OUTPUT),) |
| # Invoke a second make in the output directory, passing relevant variables |
| # check that the output directory actually exists |
| saved-output := $(KBUILD_OUTPUT) |
| KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) |
| $(if $(KBUILD_OUTPUT),, \ |
| $(error output directory "$(saved-output)" does not exist)) |
| |
| .PHONY: $(MAKECMDGOALS) |
| |
| $(filter-out _all,$(MAKECMDGOALS)) _all: |
| $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ |
| KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \ |
| KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \ |
| -f $(CURDIR)/Makefile $@ |
| |
| # Leave processing to above invocation of make |
| skip-makefile := 1 |
| endif # ifneq ($(KBUILD_OUTPUT),) |
| endif # ifeq ($(KBUILD_SRC),) |
| |
| # We process the rest of the Makefile if this is the final invocation of make |
| ifeq ($(skip-makefile),) |
| |
| # If building an external module we do not care about the all: rule |
| # but instead _all depend on modules |
| .PHONY: all |
| ifeq ($(KBUILD_EXTMOD),) |
| _all: all |
| else |
| _all: modules |
| endif |
| |
| srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) |
| TOPDIR := $(srctree) |
| # FIXME - TOPDIR is obsolete, use srctree/objtree |
| objtree := $(CURDIR) |
| src := $(srctree) |
| obj := $(objtree) |
| |
| VPATH := $(srctree) |
| |
| export srctree objtree VPATH TOPDIR |
| |
| nullstring := |
| space := $(nullstring) # end of line |
| |
| # Take the contents of any files called localversion* and the config |
| # variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be |
| # careful not to include files twice if building in the source |
| # directory. LOCALVERSION from the command line override all of this |
| |
| localver := $(objtree)/localversion* $(srctree)/localversion* |
| localver := $(sort $(wildcard $(localver))) |
| # skip backup files (containing '~') |
| localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f))) |
| |
| LOCALVERSION = $(subst $(space),, \ |
| $(shell cat /dev/null $(localver)) \ |
| $(patsubst "%",%,$(CONFIG_LOCALVERSION))) |
| |
| KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION) |
| |
| # SUBARCH tells the usermode build what the underlying arch is. That is set |
| # first, and if a usermode build is happening, the "ARCH=um" on the command |
| # line overrides the setting of ARCH below. If a native build is happening, |
| # then ARCH is assigned, getting whatever value it gets normally, and |
| # SUBARCH is subsequently ignored. |
| |
| SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ -e s/sa110/arm/ \ |
| -e s/s390x/s390/ -e s/parisc64/parisc/ ) |
| |
| # Cross compiling and selecting different set of gcc/bin-utils |
| # --------------------------------------------------------------------------- |
| # |
| # When performing cross compilation for other architectures ARCH shall be set |
| # to the target architecture. (See arch/* for the possibilities). |
| # ARCH can be set during invocation of make: |
| # make ARCH=ia64 |
| # Another way is to have ARCH set in the environment. |
| # The default ARCH is the host where make is executed. |
| |
| # CROSS_COMPILE specify the prefix used for all executables used |
| # during compilation. Only gcc and related bin-utils executables |
| # are prefixed with $(CROSS_COMPILE). |
| # CROSS_COMPILE can be set on the command line |
| # make CROSS_COMPILE=ia64-linux- |
| # Alternatively CROSS_COMPILE can be set in the environment. |
| # Default value for CROSS_COMPILE is not to prefix executables |
| # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile |
| |
| ARCH ?= $(SUBARCH) |
| CROSS_COMPILE ?= |
| |
| # Architecture as present in compile.h |
| UTS_MACHINE := $(ARCH) |
| |
| # SHELL used by kbuild |
| CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi ; fi) |
| |
| HOSTCC = gcc |
| HOSTCXX = g++ |
| HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer |
| HOSTCXXFLAGS = -O2 |
| |
| # Decide whether to build built-in, modular, or both. |
| # Normally, just do built-in. |
| |
| KBUILD_MODULES := |
| KBUILD_BUILTIN := 1 |
| |
| # If we have only "make modules", don't compile built-in objects. |
| # When we're building modules with modversions, we need to consider |
| # the built-in objects during the descend as well, in order to |
| # make sure the checksums are uptodate before we record them. |
| |
| ifeq ($(MAKECMDGOALS),modules) |
| KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) |
| endif |
| |
| # If we have "make <whatever> modules", compile modules |
| # in addition to whatever we do anyway. |
| # Just "make" or "make all" shall build modules as well |
| |
| ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) |
| KBUILD_MODULES := 1 |
| endif |
| |
| ifeq ($(MAKECMDGOALS),) |
| KBUILD_MODULES := 1 |
| endif |
| |
| export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE |
| export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD |
| |
| # Beautify output |
| # --------------------------------------------------------------------------- |
| # |
| # Normally, we echo the whole command before executing it. By making |
| # that echo $($(quiet)$(cmd)), we now have the possibility to set |
| # $(quiet) to choose other forms of output instead, e.g. |
| # |
| # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ |
| # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< |
| # |
| # If $(quiet) is empty, the whole command will be printed. |
| # If it is set to "quiet_", only the short version will be printed. |
| # If it is set to "silent_", nothing wil be printed at all, since |
| # the variable $(silent_cmd_cc_o_c) doesn't exist. |
| # |
| # A simple variant is to prefix commands with $(Q) - that's usefull |
| # for commands that shall be hidden in non-verbose mode. |
| # |
| # $(Q)ln $@ :< |
| # |
| # If KBUILD_VERBOSE equals 0 then the above command will be hidden. |
| # If KBUILD_VERBOSE equals 1 then the above command is displayed. |
| |
| ifeq ($(KBUILD_VERBOSE),1) |
| quiet = |
| Q = |
| else |
| quiet=quiet_ |
| Q = @ |
| endif |
| |
| # If the user is running make -s (silent mode), suppress echoing of |
| # commands |
| |
| ifneq ($(findstring s,$(MAKEFLAGS)),) |
| quiet=silent_ |
| endif |
| |
| export quiet Q KBUILD_VERBOSE |
| |
| ###### |
| # cc support functions to be used (only) in arch/$(ARCH)/Makefile |
| # See documentation in Documentation/kbuild/makefiles.txt |
| |
| # cc-option |
| # Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586) |
| |
| cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ |
| > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) |
| |
| # For backward compatibility |
| check_gcc = $(warning check_gcc is deprecated - use cc-option) \ |
| $(call cc-option, $(1),$(2)) |
| |
| # cc-option-yn |
| # Usage: flag := $(call cc-option-yn, -march=winchip-c6) |
| cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ |
| > /dev/null 2>&1; then echo "y"; else echo "n"; fi;) |
| |
| # cc-option-align |
| # Prefix align with either -falign or -malign |
| cc-option-align = $(subst -functions=0,,\ |
| $(call cc-option,-falign-functions=0,-malign-functions=0)) |
| |
| # cc-version |
| # Usage gcc-ver := $(call cc-version $(CC)) |
| cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ |
| $(if $(1), $(1), $(CC))) |
| |
| |
| # Look for make include files relative to root of kernel src |
| MAKEFLAGS += --include-dir=$(srctree) |
| |
| # For maximum performance (+ possibly random breakage, uncomment |
| # the following) |
| |
| #MAKEFLAGS += -rR |
| |
| # Make variables (CC, etc...) |
| |
| AS = $(CROSS_COMPILE)as |
| LD = $(CROSS_COMPILE)ld |
| CC = $(CROSS_COMPILE)gcc |
| CPP = $(CC) -E |
| AR = $(CROSS_COMPILE)ar |
| NM = $(CROSS_COMPILE)nm |
| STRIP = $(CROSS_COMPILE)strip |
| OBJCOPY = $(CROSS_COMPILE)objcopy |
| OBJDUMP = $(CROSS_COMPILE)objdump |
| AWK = awk |
| GENKSYMS = scripts/genksyms/genksyms |
| DEPMOD = /sbin/depmod |
| KALLSYMS = scripts/kallsyms |
| PERL = perl |
| CHECK = sparse |
| |
| CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ |
| MODFLAGS = -DMODULE |
| CFLAGS_MODULE = $(MODFLAGS) |
| AFLAGS_MODULE = $(MODFLAGS) |
| LDFLAGS_MODULE = -r |
| CFLAGS_KERNEL = |
| AFLAGS_KERNEL = |
| |
| |
| # Use LINUXINCLUDE when you must reference the include/ directory. |
| # Needed to be compatible with the O= option |
| LINUXINCLUDE := -Iinclude \ |
| $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) |
| |
| CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) |
| |
| CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ |
| -fno-strict-aliasing -fno-common \ |
| -ffreestanding |
| AFLAGS := -D__ASSEMBLY__ |
| |
| export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \ |
| ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ |
| CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ |
| HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS |
| |
| export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS |
| export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE |
| export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE |
| |
| # When compiling out-of-tree modules, put MODVERDIR in the module |
| # tree rather than in the kernel tree. The kernel tree might |
| # even be read-only. |
| export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions |
| |
| # The temporary file to save gcc -MD generated dependencies must not |
| # contain a comma |
| comma := , |
| depfile = $(subst $(comma),_,$(@D)/.$(@F).d) |
| |
| # Files to ignore in find ... statements |
| |
| RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o |
| RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc |
| |
| # =========================================================================== |
| # Rules shared between *config targets and build targets |
| |
| # Basic helpers built in scripts/ |
| .PHONY: scripts_basic |
| scripts_basic: |
| $(Q)$(MAKE) $(build)=scripts/basic |
| |
| .PHONY: outputmakefile |
| # outputmakefile generate a Makefile to be placed in output directory, if |
| # using a seperate output directory. This allows convinient use |
| # of make in output directory |
| outputmakefile: |
| $(Q)if test ! $(srctree) -ef $(objtree); then \ |
| $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ |
| $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \ |
| > $(objtree)/Makefile; \ |
| echo ' GEN $(objtree)/Makefile'; \ |
| fi |
| |
| # To make sure we do not include .config for any of the *config targets |
| # catch them early, and hand them over to scripts/kconfig/Makefile |
| # It is allowed to specify more targets when calling make, including |
| # mixing *config targets and build targets. |
| # For example 'make oldconfig all'. |
| # Detect when mixed targets is specified, and make a second invocation |
| # of make so .config is not included in this case either (for *config). |
| |
| no-dot-config-targets := clean mrproper distclean \ |
| cscope TAGS tags help %docs check% |
| |
| config-targets := 0 |
| mixed-targets := 0 |
| dot-config := 1 |
| |
| ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| dot-config := 0 |
| endif |
| endif |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| ifneq ($(filter config %config,$(MAKECMDGOALS)),) |
| config-targets := 1 |
| ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) |
| mixed-targets := 1 |
| endif |
| endif |
| endif |
| |
| ifeq ($(mixed-targets),1) |
| # =========================================================================== |
| # We're called with mixed targets (*config and build targets). |
| # Handle them one by one. |
| |
| %:: FORCE |
| $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ |
| |
| else |
| ifeq ($(config-targets),1) |
| # =========================================================================== |
| # *config targets only - make sure prerequisites are updated, and descend |
| # in scripts/kconfig to make the *config target |
| |
| # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. |
| # KBUILD_DEFCONFIG may point out an alternative default configuration |
| # used for 'make defconfig' |
| include $(srctree)/arch/$(ARCH)/Makefile |
| export KBUILD_DEFCONFIG |
| |
| config: scripts_basic outputmakefile FORCE |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| %config: scripts_basic outputmakefile FORCE |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| |
| else |
| # =========================================================================== |
| # Build targets only - this includes vmlinux, arch specific targets, clean |
| # targets and others. In general all targets except *config targets. |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| # Additional helpers built in scripts/ |
| # Carefully list dependencies so we do not try to build scripts twice |
| # in parrallel |
| .PHONY: scripts |
| scripts: scripts_basic include/config/MARKER |
| $(Q)$(MAKE) $(build)=$(@) |
| |
| scripts_basic: include/linux/autoconf.h |
| |
| # Objects we will link into vmlinux / subdirs we need to visit |
| init-y := init/ |
| drivers-y := drivers/ sound/ |
| net-y := net/ |
| libs-y := lib/ |
| core-y := usr/ |
| endif # KBUILD_EXTMOD |
| |
| ifeq ($(dot-config),1) |
| # In this section, we need .config |
| |
| # Read in dependencies to all Kconfig* files, make sure to run |
| # oldconfig if changes are detected. |
| -include .config.cmd |
| |
| include .config |
| |
| # If .config needs to be updated, it will be done via the dependency |
| # that autoconf has on .config. |
| # To avoid any implicit rule to kick in, define an empty command |
| .config: ; |
| |
| # If .config is newer than include/linux/autoconf.h, someone tinkered |
| # with it and forgot to run make oldconfig |
| include/linux/autoconf.h: .config |
| $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig |
| else |
| # Dummy target needed, because used as prerequisite |
| include/linux/autoconf.h: ; |
| endif |
| |
| # The all: target is the default when no target is given on the |
| # command line. |
| # This allow a user to issue only 'make' to build a kernel including modules |
| # Defaults vmlinux but it is usually overriden in the arch makefile |
| all: vmlinux |
| |
| ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE |
| CFLAGS += -Os |
| else |
| CFLAGS += -O2 |
| endif |
| |
| #Add align options if CONFIG_CC_* is not equal to 0 |
| add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1))) |
| CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions) |
| CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels) |
| CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops) |
| CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps) |
| |
| ifdef CONFIG_FRAME_POINTER |
| CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,) |
| else |
| CFLAGS += -fomit-frame-pointer |
| endif |
| |
| ifdef CONFIG_DEBUG_INFO |
| CFLAGS += -g |
| endif |
| |
| include $(srctree)/arch/$(ARCH)/Makefile |
| |
| # arch Makefile may override CC so keep this after arch Makefile is included |
| NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) |
| CHECKFLAGS += $(NOSTDINC_FLAGS) |
| |
| # warn about C99 declaration after statement |
| CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) |
| |
| # disable pointer signedness warnings in gcc 4.0 |
| CFLAGS += $(call cc-option,-Wno-pointer-sign,) |
| |
| # Default kernel image to build when no specific target is given. |
| # KBUILD_IMAGE may be overruled on the commandline or |
| # set in the environment |
| # Also any assignments in arch/$(ARCH)/Makefile take precedence over |
| # this default value |
| export KBUILD_IMAGE ?= vmlinux |
| |
| # |
| # INSTALL_PATH specifies where to place the updated kernel and system map |
| # images. Default is /boot, but you can set it to other values |
| export INSTALL_PATH ?= /boot |
| |
| # |
| # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory |
| # relocations required by build roots. This is not defined in the |
| # makefile but the arguement can be passed to make if needed. |
| # |
| |
| MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) |
| export MODLIB |
| |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ |
| |
| vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ |
| $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ |
| $(net-y) $(net-m) $(libs-y) $(libs-m))) |
| |
| vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ |
| $(init-n) $(init-) \ |
| $(core-n) $(core-) $(drivers-n) $(drivers-) \ |
| $(net-n) $(net-) $(libs-n) $(libs-)))) |
| |
| init-y := $(patsubst %/, %/built-in.o, $(init-y)) |
| core-y := $(patsubst %/, %/built-in.o, $(core-y)) |
| drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) |
| net-y := $(patsubst %/, %/built-in.o, $(net-y)) |
| libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) |
| libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) |
| libs-y := $(libs-y1) $(libs-y2) |
| |
| # Build vmlinux |
| # --------------------------------------------------------------------------- |
| # vmlinux is build from the objects selected by $(vmlinux-init) and |
| # $(vmlinux-main). Most are built-in.o files from top-level directories |
| # in the kernel tree, others are specified in arch/$(ARCH)Makefile. |
| # Ordering when linking is important, and $(vmlinux-init) must be first. |
| # |
| # vmlinux |
| # ^ |
| # | |
| # +-< $(vmlinux-init) |
| # | +--< init/version.o + more |
| # | |
| # +--< $(vmlinux-main) |
| # | +--< driver/built-in.o mm/built-in.o + more |
| # | |
| # +-< kallsyms.o (see description in CONFIG_KALLSYMS section) |
| # |
| # vmlinux version (uname -v) cannot be updated during normal |
| # descending-into-subdirs phase since we do not yet know if we need to |
| # update vmlinux. |
| # Therefore this step is delayed until just before final link of vmlinux - |
| # except in the kallsyms case where it is done just before adding the |
| # symbols to the kernel. |
| # |
| # System.map is generated to document addresses of all kernel symbols |
| |
| vmlinux-init := $(head-y) $(init-y) |
| vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) |
| vmlinux-all := $(vmlinux-init) $(vmlinux-main) |
| vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds |
| |
| # Rule to link vmlinux - also used during CONFIG_KALLSYMS |
| # May be overridden by arch/$(ARCH)/Makefile |
| quiet_cmd_vmlinux__ ?= LD $@ |
| cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ |
| -T $(vmlinux-lds) $(vmlinux-init) \ |
| --start-group $(vmlinux-main) --end-group \ |
| $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) |
| |
| # Generate new vmlinux version |
| quiet_cmd_vmlinux_version = GEN .version |
| cmd_vmlinux_version = set -e; \ |
| . $(srctree)/scripts/mkversion > .tmp_version; \ |
| mv -f .tmp_version .version; \ |
| $(MAKE) $(build)=init |
| |
| # Generate System.map |
| quiet_cmd_sysmap = SYSMAP |
| cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap |
| |
| # Link of vmlinux |
| # If CONFIG_KALLSYMS is set .version is already updated |
| # Generate System.map and verify that the content is consistent |
| |
| define rule_vmlinux__ |
| $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) |
| |
| $(call cmd,vmlinux__) |
| $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd |
| |
| $(Q)$(if $($(quiet)cmd_sysmap), \ |
| echo ' $($(quiet)cmd_sysmap) System.map' &&) \ |
| $(cmd_sysmap) $@ System.map; \ |
| if [ $$? -ne 0 ]; then \ |
| rm -f $@; \ |
| /bin/false; \ |
| fi; |
| $(verify_kallsyms) |
| endef |
| |
| |
| ifdef CONFIG_KALLSYMS |
| # Generate section listing all symbols and add it into vmlinux $(kallsyms.o) |
| # It's a three stage process: |
| # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is |
| # empty |
| # Running kallsyms on that gives us .tmp_kallsyms1.o with |
| # the right size - vmlinux version (uname -v) is updated during this step |
| # o .tmp_vmlinux2 now has a __kallsyms section of the right size, |
| # but due to the added section, some addresses have shifted. |
| # From here, we generate a correct .tmp_kallsyms2.o |
| # o The correct .tmp_kallsyms2.o is linked into the final vmlinux. |
| # o Verify that the System.map from vmlinux matches the map from |
| # .tmp_vmlinux2, just in case we did not generate kallsyms correctly. |
| # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using |
| # .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a |
| # temporary bypass to allow the kernel to be built while the |
| # maintainers work out what went wrong with kallsyms. |
| |
| ifdef CONFIG_KALLSYMS_EXTRA_PASS |
| last_kallsyms := 3 |
| else |
| last_kallsyms := 2 |
| endif |
| |
| kallsyms.o := .tmp_kallsyms$(last_kallsyms).o |
| |
| define verify_kallsyms |
| $(Q)$(if $($(quiet)cmd_sysmap), \ |
| echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ |
| $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map |
| $(Q)cmp -s System.map .tmp_System.map || \ |
| (echo Inconsistent kallsyms data; \ |
| echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ |
| rm .tmp_kallsyms* ; /bin/false ) |
| endef |
| |
| # Update vmlinux version before link |
| # Use + in front of this rule to silent warning about make -j1 |
| cmd_ksym_ld = $(cmd_vmlinux__) |
| define rule_ksym_ld |
| +$(call cmd,vmlinux_version) |
| $(call cmd,vmlinux__) |
| $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd |
| endef |
| |
| # Generate .S file with all kernel symbols |
| quiet_cmd_kallsyms = KSYM $@ |
| cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ |
| $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ |
| |
| .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE |
| $(call if_changed_dep,as_o_S) |
| |
| .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) |
| $(call cmd,kallsyms) |
| |
| # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version |
| .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE |
| $(call if_changed_rule,ksym_ld) |
| |
| .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE |
| $(call if_changed,vmlinux__) |
| |
| .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE |
| $(call if_changed,vmlinux__) |
| |
| # Needs to visit scripts/ before $(KALLSYMS) can be used. |
| $(KALLSYMS): scripts ; |
| |
| # Generate some data for debugging strange kallsyms problems |
| debug_kallsyms: .tmp_map$(last_kallsyms) |
| |
| .tmp_map%: .tmp_vmlinux% FORCE |
| ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ |
| |
| .tmp_map3: .tmp_map2 |
| |
| .tmp_map2: .tmp_map1 |
| |
| endif # ifdef CONFIG_KALLSYMS |
| |
| # vmlinux image - including updated kernel symbols |
| vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE |
| $(call if_changed_rule,vmlinux__) |
| |
| # The actual objects are generated when descending, |
| # make sure no implicit rule kicks in |
| $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; |
| |
| # Handle descending into subdirectories listed in $(vmlinux-dirs) |
| # Preset locale variables to speed up the build process. Limit locale |
| # tweaks to this spot to avoid wrong language settings when running |
| # make menuconfig etc. |
| # Error messages still appears in the original language |
| |
| .PHONY: $(vmlinux-dirs) |
| $(vmlinux-dirs): prepare-all scripts |
| $(Q)$(MAKE) $(build)=$@ |
| |
| # Things we need to do before we recursively start building the kernel |
| # or the modules are listed in "prepare-all". |
| # A multi level approach is used. prepare1 is updated first, then prepare0. |
| # prepare-all is the collection point for the prepare targets. |
| |
| .PHONY: prepare-all prepare prepare0 prepare1 prepare2 |
| |
| # prepare2 is used to check if we are building in a separate output directory, |
| # and if so do: |
| # 1) Check that make has not been executed in the kernel src $(srctree) |
| # 2) Create the include2 directory, used for the second asm symlink |
| |
| prepare2: |
| ifneq ($(KBUILD_SRC),) |
| @echo ' Using $(srctree) as source for kernel' |
| $(Q)if [ -f $(srctree)/.config ]; then \ |
| echo " $(srctree) is not clean, please run 'make mrproper'";\ |
| echo " in the '$(srctree)' directory.";\ |
| /bin/false; \ |
| fi; |
| $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; |
| $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm |
| endif |
| |
| # prepare1 creates a makefile if using a separate output directory |
| prepare1: prepare2 outputmakefile |
| |
| prepare0: prepare1 include/linux/version.h include/asm \ |
| include/config/MARKER |
| ifneq ($(KBUILD_MODULES),) |
| $(Q)rm -rf $(MODVERDIR) |
| $(Q)mkdir -p $(MODVERDIR) |
| endif |
| |
| # All the preparing.. |
| prepare-all: prepare0 prepare |
| |
| # Leave this as default for preprocessing vmlinux.lds.S, which is now |
| # done in arch/$(ARCH)/kernel/Makefile |
| |
| export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) |
| |
| # Single targets |
| # --------------------------------------------------------------------------- |
| |
| %.s: %.c scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| %.i: %.c scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| %.o: %.c scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| %.ko: scripts FORCE |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o) |
| $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost |
| %/: scripts prepare FORCE |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) |
| %.lst: %.c scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| %.s: %.S scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| %.o: %.S scripts FORCE |
| $(Q)$(MAKE) $(build)=$(@D) $@ |
| |
| # FIXME: The asm symlink changes when $(ARCH) changes. That's |
| # hard to detect, but I suppose "make mrproper" is a good idea |
| # before switching between archs anyway. |
| |
| include/asm: |
| @echo ' SYMLINK $@ -> include/asm-$(ARCH)' |
| $(Q)if [ ! -d include ]; then mkdir -p include; fi; |
| @ln -fsn asm-$(ARCH) $@ |
| |
| # Split autoconf.h into include/linux/config/* |
| |
| include/config/MARKER: include/linux/autoconf.h |
| @echo ' SPLIT include/linux/autoconf.h -> include/config/*' |
| @scripts/basic/split-include include/linux/autoconf.h include/config |
| @touch $@ |
| |
| # Generate some files |
| # --------------------------------------------------------------------------- |
| |
| # KERNELRELEASE can change from a few different places, meaning version.h |
| # needs to be updated, so this check is forced on all builds |
| |
| uts_len := 64 |
| |
| define filechk_version.h |
| if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ |
| echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ |
| exit 1; \ |
| fi; \ |
| (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ |
| echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ |
| echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ |
| ) |
| endef |
| |
| include/linux/version.h: $(srctree)/Makefile FORCE |
| $(call filechk,version.h) |
| |
| # --------------------------------------------------------------------------- |
| |
| .PHONY: depend dep |
| depend dep: |
| @echo '*** Warning: make $@ is unnecessary now.' |
| |
| # --------------------------------------------------------------------------- |
| # Modules |
| |
| ifdef CONFIG_MODULES |
| |
| # By default, build modules as well |
| |
| all: modules |
| |
| # Build modules |
| |
| .PHONY: modules |
| modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) |
| @echo ' Building modules, stage 2.'; |
| $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost |
| |
| |
| # Target to prepare building external modules |
| .PHONY: modules_prepare |
| modules_prepare: prepare-all scripts |
| |
| # Target to install modules |
| .PHONY: modules_install |
| modules_install: _modinst_ _modinst_post |
| |
| .PHONY: _modinst_ |
| _modinst_: |
| @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ |
| echo "Warning: you may need to install module-init-tools"; \ |
| echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ |
| sleep 1; \ |
| fi |
| @rm -rf $(MODLIB)/kernel |
| @rm -f $(MODLIB)/source |
| @mkdir -p $(MODLIB)/kernel |
| @ln -s $(srctree) $(MODLIB)/source |
| @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ |
| rm -f $(MODLIB)/build ; \ |
| ln -s $(objtree) $(MODLIB)/build ; \ |
| fi |
| $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst |
| |
| # If System.map exists, run depmod. This deliberately does not have a |
| # dependency on System.map since that would run the dependency tree on |
| # vmlinux. This depmod is only for convenience to give the initial |
| # boot a modules.dep even before / is mounted read-write. However the |
| # boot script depmod is the master version. |
| ifeq "$(strip $(INSTALL_MOD_PATH))" "" |
| depmod_opts := |
| else |
| depmod_opts := -b $(INSTALL_MOD_PATH) -r |
| endif |
| .PHONY: _modinst_post |
| _modinst_post: _modinst_ |
| if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi |
| |
| else # CONFIG_MODULES |
| |
| # Modules not configured |
| # --------------------------------------------------------------------------- |
| |
| modules modules_install: FORCE |
| @echo |
| @echo "The present kernel configuration has modules disabled." |
| @echo "Type 'make config' and enable loadable module support." |
| @echo "Then build a kernel with module support enabled." |
| @echo |
| @exit 1 |
| |
| endif # CONFIG_MODULES |
| |
| # Generate asm-offsets.h |
| # --------------------------------------------------------------------------- |
| |
| define filechk_gen-asm-offsets |
| (set -e; \ |
| echo "#ifndef __ASM_OFFSETS_H__"; \ |
| echo "#define __ASM_OFFSETS_H__"; \ |
| echo "/*"; \ |
| echo " * DO NOT MODIFY."; \ |
| echo " *"; \ |
| echo " * This file was generated by arch/$(ARCH)/Makefile"; \ |
| echo " *"; \ |
| echo " */"; \ |
| echo ""; \ |
| sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \ |
| echo ""; \ |
| echo "#endif" ) |
| endef |
| |
| |
| ### |
| # Cleaning is done on three levels. |
| # make clean Delete most generated files |
| # Leave enough to build external modules |
| # make mrproper Delete the current configuration, and all generated files |
| # make distclean Remove editor backup files, patch leftover files and the like |
| |
| # Directories & files removed with 'make clean' |
| CLEAN_DIRS += $(MODVERDIR) |
| CLEAN_FILES += vmlinux System.map \ |
| .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map |
| |
| # Directories & files removed with 'make mrproper' |
| MRPROPER_DIRS += include/config include2 |
| MRPROPER_FILES += .config .config.old include/asm .version \ |
| include/linux/autoconf.h include/linux/version.h \ |
| Module.symvers tags TAGS cscope* |
| |
| # clean - Delete most, but leave enough to build external modules |
| # |
| clean: rm-dirs := $(CLEAN_DIRS) |
| clean: rm-files := $(CLEAN_FILES) |
| clean-dirs := $(addprefix _clean_,$(vmlinux-alldirs)) |
| |
| .PHONY: $(clean-dirs) clean archclean |
| $(clean-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) |
| |
| clean: archclean $(clean-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| @find . $(RCS_FIND_IGNORE) \ |
| \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ |
| -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ |
| -type f -print | xargs rm -f |
| |
| # mrproper - Delete all generated files, including .config |
| # |
| mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) |
| mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) |
| mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) |
| |
| .PHONY: $(mrproper-dirs) mrproper archmrproper |
| $(mrproper-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) |
| |
| mrproper: clean archmrproper $(mrproper-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| |
| # distclean |
| # |
| .PHONY: distclean |
| |
| distclean: mrproper |
| @find $(srctree) $(RCS_FIND_IGNORE) \ |
| \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ |
| -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ |
| -o -name '.*.rej' -o -size 0 \ |
| -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ |
| -type f -print | xargs rm -f |
| |
| |
| # Packaging of the kernel to various formats |
| # --------------------------------------------------------------------------- |
| # rpm target kept for backward compatibility |
| package-dir := $(srctree)/scripts/package |
| |
| .PHONY: %-pkg rpm |
| |
| %pkg: FORCE |
| $(Q)$(MAKE) -f $(package-dir)/Makefile $@ |
| rpm: FORCE |
| $(Q)$(MAKE) -f $(package-dir)/Makefile $@ |
| |
| |
| # Brief documentation of the typical targets used |
| # --------------------------------------------------------------------------- |
| |
| boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig) |
| boards := $(notdir $(boards)) |
| |
| help: |
| @echo 'Cleaning targets:' |
| @echo ' clean - remove most generated files but keep the config' |
| @echo ' mrproper - remove all generated files + config + various backup files' |
| @echo '' |
| @echo 'Configuration targets:' |
| @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help |
| @echo '' |
| @echo 'Other generic targets:' |
| @echo ' all - Build all targets marked with [*]' |
| @echo '* vmlinux - Build the bare kernel' |
| @echo '* modules - Build all modules' |
| @echo ' modules_install - Install all modules' |
| @echo ' dir/ - Build all files in dir and below' |
| @echo ' dir/file.[ois] - Build specified target only' |
| @echo ' dir/file.ko - Build module including final link' |
| @echo ' rpm - Build a kernel as an RPM package' |
| @echo ' tags/TAGS - Generate tags file for editors' |
| @echo ' cscope - Generate cscope index' |
| @echo '' |
| @echo 'Static analysers' |
| @echo ' buildcheck - List dangling references to vmlinux discarded sections' |
| @echo ' and init sections from non-init sections' |
| @echo ' checkstack - Generate a list of stack hogs' |
| @echo ' namespacecheck - Name space analysis on compiled kernel' |
| @echo '' |
| @echo 'Kernel packaging:' |
| @$(MAKE) -f $(package-dir)/Makefile help |
| @echo '' |
| @echo 'Documentation targets:' |
| @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp |
| @echo '' |
| @echo 'Architecture specific targets ($(ARCH)):' |
| @$(if $(archhelp),$(archhelp),\ |
| echo ' No architecture specific help defined for $(ARCH)') |
| @echo '' |
| @$(if $(boards), \ |
| $(foreach b, $(boards), \ |
| printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ |
| echo '') |
| |
| @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' |
| @echo ' make O=dir [targets] Locate all output files in "dir", including .config' |
| @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)' |
| @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)' |
| @echo '' |
| @echo 'Execute "make" or "make all" to build all targets marked with [*] ' |
| @echo 'For further info see the ./README file' |
| |
| |
| # Documentation targets |
| # --------------------------------------------------------------------------- |
| %docs: scripts_basic FORCE |
| $(Q)$(MAKE) $(build)=Documentation/DocBook $@ |
| |
| else # KBUILD_EXTMOD |
| |
| ### |
| # External module support. |
| # When building external modules the kernel used as basis is considered |
| # read-only, and no consistency checks are made and the make |
| # system is not used on the basis kernel. If updates are required |
| # in the basis kernel ordinary make commands (without M=...) must |
| # be used. |
| # |
| # The following are the only valid targets when building external |
| # modules. |
| # make M=dir clean Delete all automatically generated files |
| # make M=dir modules Make all modules in specified dir |
| # make M=dir Same as 'make M=dir modules' |
| # make M=dir modules_install |
| # Install the modules build in the module directory |
| # Assumes install directory is already created |
| |
| # We are always building modules |
| KBUILD_MODULES := 1 |
| .PHONY: crmodverdir |
| crmodverdir: |
| $(Q)mkdir -p $(MODVERDIR) |
| |
| .PHONY: $(objtree)/Module.symvers |
| $(objtree)/Module.symvers: |
| @test -e $(objtree)/Module.symvers || ( \ |
| echo; \ |
| echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ |
| echo " is missing; modules will have no dependencies and modversions."; \ |
| echo ) |
| |
| module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) |
| .PHONY: $(module-dirs) modules |
| $(module-dirs): crmodverdir $(objtree)/Module.symvers |
| $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) |
| |
| modules: $(module-dirs) |
| @echo ' Building modules, stage 2.'; |
| $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost |
| |
| .PHONY: modules_install |
| modules_install: |
| $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst |
| |
| clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) |
| |
| .PHONY: $(clean-dirs) clean |
| $(clean-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) |
| |
| clean: rm-dirs := $(MODVERDIR) |
| clean: $(clean-dirs) |
| $(call cmd,rmdirs) |
| @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ |
| \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ |
| -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ |
| -type f -print | xargs rm -f |
| |
| help: |
| @echo ' Building external modules.' |
| @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' |
| @echo '' |
| @echo ' modules - default target, build the module(s)' |
| @echo ' modules_install - install the module' |
| @echo ' clean - remove generated files in module directory only' |
| @echo '' |
| endif # KBUILD_EXTMOD |
| |
| # Generate tags for editors |
| # --------------------------------------------------------------------------- |
| |
| #We want __srctree to totally vanish out when KBUILD_OUTPUT is not set |
| #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. |
| #Adding $(srctree) adds about 20M on i386 to the size of the output file! |
| |
| ifeq ($(src),$(obj)) |
| __srctree = |
| else |
| __srctree = $(srctree)/ |
| endif |
| |
| ALLSOURCE_ARCHS := $(ARCH) |
| |
| define all-sources |
| ( find $(__srctree) $(RCS_FIND_IGNORE) \ |
| \( -name include -o -name arch \) -prune -o \ |
| -name '*.[chS]' -print; \ |
| for ARCH in $(ALLSOURCE_ARCHS) ; do \ |
| find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \ |
| -name '*.[chS]' -print; \ |
| done ; \ |
| find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \ |
| -name '*.[chS]' -print; \ |
| find $(__srctree)include $(RCS_FIND_IGNORE) \ |
| \( -name config -o -name 'asm-*' \) -prune \ |
| -o -name '*.[chS]' -print; \ |
| for ARCH in $(ALLSOURCE_ARCHS) ; do \ |
| find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \ |
| -name '*.[chS]' -print; \ |
| done ; \ |
| find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ |
| -name '*.[chS]' -print ) |
| endef |
| |
| quiet_cmd_cscope-file = FILELST cscope.files |
| cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files |
| |
| quiet_cmd_cscope = MAKE cscope.out |
| cmd_cscope = cscope -b |
| |
| cscope: FORCE |
| $(call cmd,cscope-file) |
| $(call cmd,cscope) |
| |
| quiet_cmd_TAGS = MAKE $@ |
| cmd_TAGS = $(all-sources) | etags - |
| |
| # Exuberant ctags works better with -I |
| |
| quiet_cmd_tags = MAKE $@ |
| define cmd_tags |
| rm -f $@; \ |
| CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ |
| $(all-sources) | xargs ctags $$CTAGSF -a |
| endef |
| |
| TAGS: FORCE |
| $(call cmd,TAGS) |
| |
| tags: FORCE |
| $(call cmd,tags) |
| |
| |
| # Scripts to check various things for consistency |
| # --------------------------------------------------------------------------- |
| |
| configcheck: |
| find * $(RCS_FIND_IGNORE) \ |
| -name '*.[hcS]' -type f -print | sort \ |
| | xargs $(PERL) -w scripts/checkconfig.pl |
| |
| includecheck: |
| find * $(RCS_FIND_IGNORE) \ |
| -name '*.[hcS]' -type f -print | sort \ |
| | xargs $(PERL) -w scripts/checkincludes.pl |
| |
| versioncheck: |
| find * $(RCS_FIND_IGNORE) \ |
| -name '*.[hcS]' -type f -print | sort \ |
| | xargs $(PERL) -w scripts/checkversion.pl |
| |
| buildcheck: |
| $(PERL) $(srctree)/scripts/reference_discarded.pl |
| $(PERL) $(srctree)/scripts/reference_init.pl |
| |
| namespacecheck: |
| $(PERL) $(srctree)/scripts/namespace.pl |
| |
| endif #ifeq ($(config-targets),1) |
| endif #ifeq ($(mixed-targets),1) |
| |
| .PHONY: checkstack |
| checkstack: |
| $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ |
| $(PERL) $(src)/scripts/checkstack.pl $(ARCH) |
| |
| kernelrelease: |
| @echo $(KERNELRELEASE) |
| |
| # FIXME Should go into a make.lib or something |
| # =========================================================================== |
| |
| quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) |
| cmd_rmdirs = rm -rf $(rm-dirs) |
| |
| quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) |
| cmd_rmfiles = rm -f $(rm-files) |
| |
| |
| a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ |
| $(NOSTDINC_FLAGS) $(CPPFLAGS) \ |
| $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o) |
| |
| quiet_cmd_as_o_S = AS $@ |
| cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< |
| |
| # read all saved command lines |
| |
| targets := $(wildcard $(sort $(targets))) |
| cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) |
| |
| ifneq ($(cmd_files),) |
| $(cmd_files): ; # Do not try to update included dependency files |
| include $(cmd_files) |
| endif |
| |
| # Execute command and generate cmd file |
| if_changed = $(if $(strip $? \ |
| $(filter-out $(cmd_$(1)),$(cmd_$@))\ |
| $(filter-out $(cmd_$@),$(cmd_$(1)))),\ |
| @set -e; \ |
| $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \ |
| $(cmd_$(1)); \ |
| echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd) |
| |
| |
| # execute the command and also postprocess generated .d dependencies |
| # file |
| if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ |
| $(filter-out $(cmd_$(1)),$(cmd_$@))\ |
| $(filter-out $(cmd_$@),$(cmd_$(1)))),\ |
| $(Q)set -e; \ |
| $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \ |
| $(cmd_$(1)); \ |
| scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \ |
| rm -f $(depfile); \ |
| mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd) |
| |
| # Usage: $(call if_changed_rule,foo) |
| # will check if $(cmd_foo) changed, or any of the prequisites changed, |
| # and if so will execute $(rule_foo) |
| |
| if_changed_rule = $(if $(strip $? \ |
| $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\ |
| $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\ |
| $(Q)$(rule_$(1))) |
| |
| # If quiet is set, only print short version of command |
| |
| cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1)) |
| |
| # filechk is used to check if the content of a generated file is updated. |
| # Sample usage: |
| # define filechk_sample |
| # echo $KERNELRELEASE |
| # endef |
| # version.h : Makefile |
| # $(call filechk,sample) |
| # The rule defined shall write to stdout the content of the new file. |
| # The existing file will be compared with the new one. |
| # - If no file exist it is created |
| # - If the content differ the new file is used |
| # - If they are equal no change, and no timestamp update |
| |
| define filechk |
| @set -e; \ |
| echo ' CHK $@'; \ |
| mkdir -p $(dir $@); \ |
| $(filechk_$(1)) < $< > $@.tmp; \ |
| if [ -r $@ ] && cmp -s $@ $@.tmp; then \ |
| rm -f $@.tmp; \ |
| else \ |
| echo ' UPD $@'; \ |
| mv -f $@.tmp $@; \ |
| fi |
| endef |
| |
| # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir |
| # Usage: |
| # $(Q)$(MAKE) $(build)=dir |
| build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj |
| |
| # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir |
| # Usage: |
| # $(Q)$(MAKE) $(clean)=dir |
| clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj |
| |
| # $(call descend,<dir>,<target>) |
| # Recursively call a sub-make in <dir> with target <target> |
| # Usage is deprecated, because make does not see this as an invocation of make. |
| descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2) |
| |
| endif # skip-makefile |
| |
| FORCE: |