| // |
| // assembly portion of the IA64 MCA handling |
| // |
| // Mods by cfleck to integrate into kernel build |
| // 00/03/15 davidm Added various stop bits to get a clean compile |
| // |
| // 00/03/29 cfleck Added code to save INIT handoff state in pt_regs format, switch to temp |
| // kstack, switch modes, jump to C INIT handler |
| // |
| // 02/01/04 J.Hall <jenna.s.hall@intel.com> |
| // Before entering virtual mode code: |
| // 1. Check for TLB CPU error |
| // 2. Restore current thread pointer to kr6 |
| // 3. Move stack ptr 16 bytes to conform to C calling convention |
| // |
| // 04/11/12 Russ Anderson <rja@sgi.com> |
| // Added per cpu MCA/INIT stack save areas. |
| // |
| // 12/08/05 Keith Owens <kaos@sgi.com> |
| // Use per cpu MCA/INIT stacks for all data. |
| // |
| #include <linux/config.h> |
| #include <linux/threads.h> |
| |
| #include <asm/asmmacro.h> |
| #include <asm/pgtable.h> |
| #include <asm/processor.h> |
| #include <asm/mca_asm.h> |
| #include <asm/mca.h> |
| |
| #include "entry.h" |
| |
| #define GET_IA64_MCA_DATA(reg) \ |
| GET_THIS_PADDR(reg, ia64_mca_data) \ |
| ;; \ |
| ld8 reg=[reg] |
| |
| .global ia64_do_tlb_purge |
| .global ia64_os_mca_dispatch |
| .global ia64_os_init_dispatch_monarch |
| .global ia64_os_init_dispatch_slave |
| |
| .text |
| .align 16 |
| |
| //StartMain//////////////////////////////////////////////////////////////////// |
| |
| /* |
| * Just the TLB purge part is moved to a separate function |
| * so we can re-use the code for cpu hotplug code as well |
| * Caller should now setup b1, so we can branch once the |
| * tlb flush is complete. |
| */ |
| |
| ia64_do_tlb_purge: |
| #define O(member) IA64_CPUINFO_##member##_OFFSET |
| |
| GET_THIS_PADDR(r2, cpu_info) // load phys addr of cpu_info into r2 |
| ;; |
| addl r17=O(PTCE_STRIDE),r2 |
| addl r2=O(PTCE_BASE),r2 |
| ;; |
| ld8 r18=[r2],(O(PTCE_COUNT)-O(PTCE_BASE));; // r18=ptce_base |
| ld4 r19=[r2],4 // r19=ptce_count[0] |
| ld4 r21=[r17],4 // r21=ptce_stride[0] |
| ;; |
| ld4 r20=[r2] // r20=ptce_count[1] |
| ld4 r22=[r17] // r22=ptce_stride[1] |
| mov r24=0 |
| ;; |
| adds r20=-1,r20 |
| ;; |
| #undef O |
| |
| 2: |
| cmp.ltu p6,p7=r24,r19 |
| (p7) br.cond.dpnt.few 4f |
| mov ar.lc=r20 |
| 3: |
| ptc.e r18 |
| ;; |
| add r18=r22,r18 |
| br.cloop.sptk.few 3b |
| ;; |
| add r18=r21,r18 |
| add r24=1,r24 |
| ;; |
| br.sptk.few 2b |
| 4: |
| srlz.i // srlz.i implies srlz.d |
| ;; |
| |
| // Now purge addresses formerly mapped by TR registers |
| // 1. Purge ITR&DTR for kernel. |
| movl r16=KERNEL_START |
| mov r18=KERNEL_TR_PAGE_SHIFT<<2 |
| ;; |
| ptr.i r16, r18 |
| ptr.d r16, r18 |
| ;; |
| srlz.i |
| ;; |
| srlz.d |
| ;; |
| // 2. Purge DTR for PERCPU data. |
| movl r16=PERCPU_ADDR |
| mov r18=PERCPU_PAGE_SHIFT<<2 |
| ;; |
| ptr.d r16,r18 |
| ;; |
| srlz.d |
| ;; |
| // 3. Purge ITR for PAL code. |
| GET_THIS_PADDR(r2, ia64_mca_pal_base) |
| ;; |
| ld8 r16=[r2] |
| mov r18=IA64_GRANULE_SHIFT<<2 |
| ;; |
| ptr.i r16,r18 |
| ;; |
| srlz.i |
| ;; |
| // 4. Purge DTR for stack. |
| mov r16=IA64_KR(CURRENT_STACK) |
| ;; |
| shl r16=r16,IA64_GRANULE_SHIFT |
| movl r19=PAGE_OFFSET |
| ;; |
| add r16=r19,r16 |
| mov r18=IA64_GRANULE_SHIFT<<2 |
| ;; |
| ptr.d r16,r18 |
| ;; |
| srlz.i |
| ;; |
| // Now branch away to caller. |
| br.sptk.many b1 |
| ;; |
| |
| //EndMain////////////////////////////////////////////////////////////////////// |
| |
| //StartMain//////////////////////////////////////////////////////////////////// |
| |
| ia64_os_mca_dispatch: |
| // Serialize all MCA processing |
| mov r3=1;; |
| LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);; |
| ia64_os_mca_spin: |
| xchg4 r4=[r2],r3;; |
| cmp.ne p6,p0=r4,r0 |
| (p6) br ia64_os_mca_spin |
| |
| mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| mov r19=1 // All MCA events are treated as monarch (for now) |
| br.sptk ia64_state_save // save the state that is not in minstate |
| 1: |
| |
| GET_IA64_MCA_DATA(r2) |
| // Using MCA stack, struct ia64_sal_os_state, variable proc_state_param |
| ;; |
| add r3=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, r2 |
| ;; |
| ld8 r18=[r3] // Get processor state parameter on existing PALE_CHECK. |
| ;; |
| tbit.nz p6,p7=r18,60 |
| (p7) br.spnt done_tlb_purge_and_reload |
| |
| // The following code purges TC and TR entries. Then reload all TC entries. |
| // Purge percpu data TC entries. |
| begin_tlb_purge_and_reload: |
| movl r18=ia64_reload_tr;; |
| LOAD_PHYSICAL(p0,r18,ia64_reload_tr);; |
| mov b1=r18;; |
| br.sptk.many ia64_do_tlb_purge;; |
| |
| ia64_reload_tr: |
| // Finally reload the TR registers. |
| // 1. Reload DTR/ITR registers for kernel. |
| mov r18=KERNEL_TR_PAGE_SHIFT<<2 |
| movl r17=KERNEL_START |
| ;; |
| mov cr.itir=r18 |
| mov cr.ifa=r17 |
| mov r16=IA64_TR_KERNEL |
| mov r19=ip |
| movl r18=PAGE_KERNEL |
| ;; |
| dep r17=0,r19,0, KERNEL_TR_PAGE_SHIFT |
| ;; |
| or r18=r17,r18 |
| ;; |
| itr.i itr[r16]=r18 |
| ;; |
| itr.d dtr[r16]=r18 |
| ;; |
| srlz.i |
| srlz.d |
| ;; |
| // 2. Reload DTR register for PERCPU data. |
| GET_THIS_PADDR(r2, ia64_mca_per_cpu_pte) |
| ;; |
| movl r16=PERCPU_ADDR // vaddr |
| movl r18=PERCPU_PAGE_SHIFT<<2 |
| ;; |
| mov cr.itir=r18 |
| mov cr.ifa=r16 |
| ;; |
| ld8 r18=[r2] // load per-CPU PTE |
| mov r16=IA64_TR_PERCPU_DATA; |
| ;; |
| itr.d dtr[r16]=r18 |
| ;; |
| srlz.d |
| ;; |
| // 3. Reload ITR for PAL code. |
| GET_THIS_PADDR(r2, ia64_mca_pal_pte) |
| ;; |
| ld8 r18=[r2] // load PAL PTE |
| ;; |
| GET_THIS_PADDR(r2, ia64_mca_pal_base) |
| ;; |
| ld8 r16=[r2] // load PAL vaddr |
| mov r19=IA64_GRANULE_SHIFT<<2 |
| ;; |
| mov cr.itir=r19 |
| mov cr.ifa=r16 |
| mov r20=IA64_TR_PALCODE |
| ;; |
| itr.i itr[r20]=r18 |
| ;; |
| srlz.i |
| ;; |
| // 4. Reload DTR for stack. |
| mov r16=IA64_KR(CURRENT_STACK) |
| ;; |
| shl r16=r16,IA64_GRANULE_SHIFT |
| movl r19=PAGE_OFFSET |
| ;; |
| add r18=r19,r16 |
| movl r20=PAGE_KERNEL |
| ;; |
| add r16=r20,r16 |
| mov r19=IA64_GRANULE_SHIFT<<2 |
| ;; |
| mov cr.itir=r19 |
| mov cr.ifa=r18 |
| mov r20=IA64_TR_CURRENT_STACK |
| ;; |
| itr.d dtr[r20]=r16 |
| ;; |
| srlz.d |
| |
| done_tlb_purge_and_reload: |
| |
| // switch to per cpu MCA stack |
| mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_new_stack |
| 1: |
| |
| // everything saved, now we can set the kernel registers |
| mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_set_kernel_registers |
| 1: |
| |
| // This must be done in physical mode |
| GET_IA64_MCA_DATA(r2) |
| ;; |
| mov r7=r2 |
| |
| // Enter virtual mode from physical mode |
| VIRTUAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_begin, r4) |
| |
| // This code returns to SAL via SOS r2, in general SAL has no unwind |
| // data. To get a clean termination when backtracing the C MCA/INIT |
| // handler, set a dummy return address of 0 in this routine. That |
| // requires that ia64_os_mca_virtual_begin be a global function. |
| ENTRY(ia64_os_mca_virtual_begin) |
| .prologue |
| .save rp,r0 |
| .body |
| |
| mov ar.rsc=3 // set eager mode for C handler |
| mov r2=r7 // see GET_IA64_MCA_DATA above |
| ;; |
| |
| // Call virtual mode handler |
| alloc r14=ar.pfs,0,0,3,0 |
| ;; |
| DATA_PA_TO_VA(r2,r7) |
| ;; |
| add out0=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 |
| add out1=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 |
| add out2=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET, r2 |
| br.call.sptk.many b0=ia64_mca_handler |
| |
| // Revert back to physical mode before going back to SAL |
| PHYSICAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_end, r4) |
| ia64_os_mca_virtual_end: |
| |
| END(ia64_os_mca_virtual_begin) |
| |
| // switch back to previous stack |
| alloc r14=ar.pfs,0,0,0,0 // remove the MCA handler frame |
| mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_old_stack |
| 1: |
| |
| mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_state_restore // restore the SAL state |
| 1: |
| |
| mov b0=r12 // SAL_CHECK return address |
| |
| // release lock |
| LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);; |
| st4.rel [r3]=r0 |
| |
| br b0 |
| |
| //EndMain////////////////////////////////////////////////////////////////////// |
| |
| //StartMain//////////////////////////////////////////////////////////////////// |
| |
| // |
| // SAL to OS entry point for INIT on all processors. This has been defined for |
| // registration purposes with SAL as a part of ia64_mca_init. Monarch and |
| // slave INIT have identical processing, except for the value of the |
| // sos->monarch flag in r19. |
| // |
| |
| ia64_os_init_dispatch_monarch: |
| mov r19=1 // Bow, bow, ye lower middle classes! |
| br.sptk ia64_os_init_dispatch |
| |
| ia64_os_init_dispatch_slave: |
| mov r19=0 // <igor>yeth, mathter</igor> |
| |
| ia64_os_init_dispatch: |
| |
| mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_state_save // save the state that is not in minstate |
| 1: |
| |
| // switch to per cpu INIT stack |
| mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_new_stack |
| 1: |
| |
| // everything saved, now we can set the kernel registers |
| mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_set_kernel_registers |
| 1: |
| |
| // This must be done in physical mode |
| GET_IA64_MCA_DATA(r2) |
| ;; |
| mov r7=r2 |
| |
| // Enter virtual mode from physical mode |
| VIRTUAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_begin, r4) |
| |
| // This code returns to SAL via SOS r2, in general SAL has no unwind |
| // data. To get a clean termination when backtracing the C MCA/INIT |
| // handler, set a dummy return address of 0 in this routine. That |
| // requires that ia64_os_init_virtual_begin be a global function. |
| ENTRY(ia64_os_init_virtual_begin) |
| .prologue |
| .save rp,r0 |
| .body |
| |
| mov ar.rsc=3 // set eager mode for C handler |
| mov r2=r7 // see GET_IA64_MCA_DATA above |
| ;; |
| |
| // Call virtual mode handler |
| alloc r14=ar.pfs,0,0,3,0 |
| ;; |
| DATA_PA_TO_VA(r2,r7) |
| ;; |
| add out0=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 |
| add out1=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 |
| add out2=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SOS_OFFSET, r2 |
| br.call.sptk.many b0=ia64_init_handler |
| |
| // Revert back to physical mode before going back to SAL |
| PHYSICAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_end, r4) |
| ia64_os_init_virtual_end: |
| |
| END(ia64_os_init_virtual_begin) |
| |
| mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_state_restore // restore the SAL state |
| 1: |
| |
| // switch back to previous stack |
| alloc r14=ar.pfs,0,0,0,0 // remove the INIT handler frame |
| mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack |
| LOAD_PHYSICAL(p0,r2,1f) // return address |
| br.sptk ia64_old_stack |
| 1: |
| |
| mov b0=r12 // SAL_CHECK return address |
| br b0 |
| |
| //EndMain////////////////////////////////////////////////////////////////////// |
| |
| // common defines for the stubs |
| #define ms r4 |
| #define regs r5 |
| #define temp1 r2 /* careful, it overlaps with input registers */ |
| #define temp2 r3 /* careful, it overlaps with input registers */ |
| #define temp3 r7 |
| #define temp4 r14 |
| |
| |
| //++ |
| // Name: |
| // ia64_state_save() |
| // |
| // Stub Description: |
| // |
| // Save the state that is not in minstate. This is sensitive to the layout of |
| // struct ia64_sal_os_state in mca.h. |
| // |
| // r2 contains the return address, r3 contains either |
| // IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. |
| // |
| // The OS to SAL section of struct ia64_sal_os_state is set to a default |
| // value of cold boot (MCA) or warm boot (INIT) and return to the same |
| // context. ia64_sal_os_state is also used to hold some registers that |
| // need to be saved and restored across the stack switches. |
| // |
| // Most input registers to this stub come from PAL/SAL |
| // r1 os gp, physical |
| // r8 pal_proc entry point |
| // r9 sal_proc entry point |
| // r10 sal gp |
| // r11 MCA - rendevzous state, INIT - reason code |
| // r12 sal return address |
| // r17 pal min_state |
| // r18 processor state parameter |
| // r19 monarch flag, set by the caller of this routine |
| // |
| // In addition to the SAL to OS state, this routine saves all the |
| // registers that appear in struct pt_regs and struct switch_stack, |
| // excluding those that are already in the PAL minstate area. This |
| // results in a partial pt_regs and switch_stack, the C code copies the |
| // remaining registers from PAL minstate to pt_regs and switch_stack. The |
| // resulting structures contain all the state of the original process when |
| // MCA/INIT occurred. |
| // |
| //-- |
| |
| ia64_state_save: |
| add regs=MCA_SOS_OFFSET, r3 |
| add ms=MCA_SOS_OFFSET+8, r3 |
| mov b0=r2 // save return address |
| cmp.eq p1,p2=IA64_MCA_CPU_MCA_STACK_OFFSET, r3 |
| ;; |
| GET_IA64_MCA_DATA(temp2) |
| ;; |
| add temp1=temp2, regs // struct ia64_sal_os_state on MCA or INIT stack |
| add temp2=temp2, ms // struct ia64_sal_os_state+8 on MCA or INIT stack |
| ;; |
| mov regs=temp1 // save the start of sos |
| st8 [temp1]=r1,16 // os_gp |
| st8 [temp2]=r8,16 // pal_proc |
| ;; |
| st8 [temp1]=r9,16 // sal_proc |
| st8 [temp2]=r11,16 // rv_rc |
| mov r11=cr.iipa |
| ;; |
| st8 [temp1]=r18,16 // proc_state_param |
| st8 [temp2]=r19,16 // monarch |
| mov r6=IA64_KR(CURRENT) |
| ;; |
| st8 [temp1]=r12,16 // sal_ra |
| st8 [temp2]=r10,16 // sal_gp |
| mov r12=cr.isr |
| ;; |
| st8 [temp1]=r17,16 // pal_min_state |
| st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT |
| mov r6=IA64_KR(CURRENT_STACK) |
| ;; |
| st8 [temp1]=r6,16 // prev_IA64_KR_CURRENT_STACK |
| st8 [temp2]=r0,16 // prev_task, starts off as NULL |
| mov r6=cr.ifa |
| ;; |
| st8 [temp1]=r12,16 // cr.isr |
| st8 [temp2]=r6,16 // cr.ifa |
| mov r12=cr.itir |
| ;; |
| st8 [temp1]=r12,16 // cr.itir |
| st8 [temp2]=r11,16 // cr.iipa |
| mov r12=cr.iim |
| ;; |
| st8 [temp1]=r12,16 // cr.iim |
| (p1) mov r12=IA64_MCA_COLD_BOOT |
| (p2) mov r12=IA64_INIT_WARM_BOOT |
| mov r6=cr.iha |
| ;; |
| st8 [temp2]=r6,16 // cr.iha |
| st8 [temp1]=r12 // os_status, default is cold boot |
| mov r6=IA64_MCA_SAME_CONTEXT |
| ;; |
| st8 [temp2]=r6 // context, default is same context |
| |
| // Save the pt_regs data that is not in minstate. The previous code |
| // left regs at sos. |
| add regs=MCA_PT_REGS_OFFSET-MCA_SOS_OFFSET, regs |
| ;; |
| add temp1=PT(B6), regs |
| mov temp3=b6 |
| mov temp4=b7 |
| add temp2=PT(B7), regs |
| ;; |
| st8 [temp1]=temp3,PT(AR_CSD)-PT(B6) // save b6 |
| st8 [temp2]=temp4,PT(AR_SSD)-PT(B7) // save b7 |
| mov temp3=ar.csd |
| mov temp4=ar.ssd |
| cover // must be last in group |
| ;; |
| st8 [temp1]=temp3,PT(AR_UNAT)-PT(AR_CSD) // save ar.csd |
| st8 [temp2]=temp4,PT(AR_PFS)-PT(AR_SSD) // save ar.ssd |
| mov temp3=ar.unat |
| mov temp4=ar.pfs |
| ;; |
| st8 [temp1]=temp3,PT(AR_RNAT)-PT(AR_UNAT) // save ar.unat |
| st8 [temp2]=temp4,PT(AR_BSPSTORE)-PT(AR_PFS) // save ar.pfs |
| mov temp3=ar.rnat |
| mov temp4=ar.bspstore |
| ;; |
| st8 [temp1]=temp3,PT(LOADRS)-PT(AR_RNAT) // save ar.rnat |
| st8 [temp2]=temp4,PT(AR_FPSR)-PT(AR_BSPSTORE) // save ar.bspstore |
| mov temp3=ar.bsp |
| ;; |
| sub temp3=temp3, temp4 // ar.bsp - ar.bspstore |
| mov temp4=ar.fpsr |
| ;; |
| shl temp3=temp3,16 // compute ar.rsc to be used for "loadrs" |
| ;; |
| st8 [temp1]=temp3,PT(AR_CCV)-PT(LOADRS) // save loadrs |
| st8 [temp2]=temp4,PT(F6)-PT(AR_FPSR) // save ar.fpsr |
| mov temp3=ar.ccv |
| ;; |
| st8 [temp1]=temp3,PT(F7)-PT(AR_CCV) // save ar.ccv |
| stf.spill [temp2]=f6,PT(F8)-PT(F6) |
| ;; |
| stf.spill [temp1]=f7,PT(F9)-PT(F7) |
| stf.spill [temp2]=f8,PT(F10)-PT(F8) |
| ;; |
| stf.spill [temp1]=f9,PT(F11)-PT(F9) |
| stf.spill [temp2]=f10 |
| ;; |
| stf.spill [temp1]=f11 |
| |
| // Save the switch_stack data that is not in minstate nor pt_regs. The |
| // previous code left regs at pt_regs. |
| add regs=MCA_SWITCH_STACK_OFFSET-MCA_PT_REGS_OFFSET, regs |
| ;; |
| add temp1=SW(F2), regs |
| add temp2=SW(F3), regs |
| ;; |
| stf.spill [temp1]=f2,32 |
| stf.spill [temp2]=f3,32 |
| ;; |
| stf.spill [temp1]=f4,32 |
| stf.spill [temp2]=f5,32 |
| ;; |
| stf.spill [temp1]=f12,32 |
| stf.spill [temp2]=f13,32 |
| ;; |
| stf.spill [temp1]=f14,32 |
| stf.spill [temp2]=f15,32 |
| ;; |
| stf.spill [temp1]=f16,32 |
| stf.spill [temp2]=f17,32 |
| ;; |
| stf.spill [temp1]=f18,32 |
| stf.spill [temp2]=f19,32 |
| ;; |
| stf.spill [temp1]=f20,32 |
| stf.spill [temp2]=f21,32 |
| ;; |
| stf.spill [temp1]=f22,32 |
| stf.spill [temp2]=f23,32 |
| ;; |
| stf.spill [temp1]=f24,32 |
| stf.spill [temp2]=f25,32 |
| ;; |
| stf.spill [temp1]=f26,32 |
| stf.spill [temp2]=f27,32 |
| ;; |
| stf.spill [temp1]=f28,32 |
| stf.spill [temp2]=f29,32 |
| ;; |
| stf.spill [temp1]=f30,SW(B2)-SW(F30) |
| stf.spill [temp2]=f31,SW(B3)-SW(F31) |
| mov temp3=b2 |
| mov temp4=b3 |
| ;; |
| st8 [temp1]=temp3,16 // save b2 |
| st8 [temp2]=temp4,16 // save b3 |
| mov temp3=b4 |
| mov temp4=b5 |
| ;; |
| st8 [temp1]=temp3,SW(AR_LC)-SW(B4) // save b4 |
| st8 [temp2]=temp4 // save b5 |
| mov temp3=ar.lc |
| ;; |
| st8 [temp1]=temp3 // save ar.lc |
| |
| // FIXME: Some proms are incorrectly accessing the minstate area as |
| // cached data. The C code uses region 6, uncached virtual. Ensure |
| // that there is no cache data lying around for the first 1K of the |
| // minstate area. |
| // Remove this code in September 2006, that gives platforms a year to |
| // fix their proms and get their customers updated. |
| |
| add r1=32*1,r17 |
| add r2=32*2,r17 |
| add r3=32*3,r17 |
| add r4=32*4,r17 |
| add r5=32*5,r17 |
| add r6=32*6,r17 |
| add r7=32*7,r17 |
| ;; |
| fc r17 |
| fc r1 |
| fc r2 |
| fc r3 |
| fc r4 |
| fc r5 |
| fc r6 |
| fc r7 |
| add r17=32*8,r17 |
| add r1=32*8,r1 |
| add r2=32*8,r2 |
| add r3=32*8,r3 |
| add r4=32*8,r4 |
| add r5=32*8,r5 |
| add r6=32*8,r6 |
| add r7=32*8,r7 |
| ;; |
| fc r17 |
| fc r1 |
| fc r2 |
| fc r3 |
| fc r4 |
| fc r5 |
| fc r6 |
| fc r7 |
| add r17=32*8,r17 |
| add r1=32*8,r1 |
| add r2=32*8,r2 |
| add r3=32*8,r3 |
| add r4=32*8,r4 |
| add r5=32*8,r5 |
| add r6=32*8,r6 |
| add r7=32*8,r7 |
| ;; |
| fc r17 |
| fc r1 |
| fc r2 |
| fc r3 |
| fc r4 |
| fc r5 |
| fc r6 |
| fc r7 |
| add r17=32*8,r17 |
| add r1=32*8,r1 |
| add r2=32*8,r2 |
| add r3=32*8,r3 |
| add r4=32*8,r4 |
| add r5=32*8,r5 |
| add r6=32*8,r6 |
| add r7=32*8,r7 |
| ;; |
| fc r17 |
| fc r1 |
| fc r2 |
| fc r3 |
| fc r4 |
| fc r5 |
| fc r6 |
| fc r7 |
| |
| br.sptk b0 |
| |
| //EndStub////////////////////////////////////////////////////////////////////// |
| |
| |
| //++ |
| // Name: |
| // ia64_state_restore() |
| // |
| // Stub Description: |
| // |
| // Restore the SAL/OS state. This is sensitive to the layout of struct |
| // ia64_sal_os_state in mca.h. |
| // |
| // r2 contains the return address, r3 contains either |
| // IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. |
| // |
| // In addition to the SAL to OS state, this routine restores all the |
| // registers that appear in struct pt_regs and struct switch_stack, |
| // excluding those in the PAL minstate area. |
| // |
| //-- |
| |
| ia64_state_restore: |
| // Restore the switch_stack data that is not in minstate nor pt_regs. |
| add regs=MCA_SWITCH_STACK_OFFSET, r3 |
| mov b0=r2 // save return address |
| ;; |
| GET_IA64_MCA_DATA(temp2) |
| ;; |
| add regs=temp2, regs |
| ;; |
| add temp1=SW(F2), regs |
| add temp2=SW(F3), regs |
| ;; |
| ldf.fill f2=[temp1],32 |
| ldf.fill f3=[temp2],32 |
| ;; |
| ldf.fill f4=[temp1],32 |
| ldf.fill f5=[temp2],32 |
| ;; |
| ldf.fill f12=[temp1],32 |
| ldf.fill f13=[temp2],32 |
| ;; |
| ldf.fill f14=[temp1],32 |
| ldf.fill f15=[temp2],32 |
| ;; |
| ldf.fill f16=[temp1],32 |
| ldf.fill f17=[temp2],32 |
| ;; |
| ldf.fill f18=[temp1],32 |
| ldf.fill f19=[temp2],32 |
| ;; |
| ldf.fill f20=[temp1],32 |
| ldf.fill f21=[temp2],32 |
| ;; |
| ldf.fill f22=[temp1],32 |
| ldf.fill f23=[temp2],32 |
| ;; |
| ldf.fill f24=[temp1],32 |
| ldf.fill f25=[temp2],32 |
| ;; |
| ldf.fill f26=[temp1],32 |
| ldf.fill f27=[temp2],32 |
| ;; |
| ldf.fill f28=[temp1],32 |
| ldf.fill f29=[temp2],32 |
| ;; |
| ldf.fill f30=[temp1],SW(B2)-SW(F30) |
| ldf.fill f31=[temp2],SW(B3)-SW(F31) |
| ;; |
| ld8 temp3=[temp1],16 // restore b2 |
| ld8 temp4=[temp2],16 // restore b3 |
| ;; |
| mov b2=temp3 |
| mov b3=temp4 |
| ld8 temp3=[temp1],SW(AR_LC)-SW(B4) // restore b4 |
| ld8 temp4=[temp2] // restore b5 |
| ;; |
| mov b4=temp3 |
| mov b5=temp4 |
| ld8 temp3=[temp1] // restore ar.lc |
| ;; |
| mov ar.lc=temp3 |
| |
| // Restore the pt_regs data that is not in minstate. The previous code |
| // left regs at switch_stack. |
| add regs=MCA_PT_REGS_OFFSET-MCA_SWITCH_STACK_OFFSET, regs |
| ;; |
| add temp1=PT(B6), regs |
| add temp2=PT(B7), regs |
| ;; |
| ld8 temp3=[temp1],PT(AR_CSD)-PT(B6) // restore b6 |
| ld8 temp4=[temp2],PT(AR_SSD)-PT(B7) // restore b7 |
| ;; |
| mov b6=temp3 |
| mov b7=temp4 |
| ld8 temp3=[temp1],PT(AR_UNAT)-PT(AR_CSD) // restore ar.csd |
| ld8 temp4=[temp2],PT(AR_PFS)-PT(AR_SSD) // restore ar.ssd |
| ;; |
| mov ar.csd=temp3 |
| mov ar.ssd=temp4 |
| ld8 temp3=[temp1] // restore ar.unat |
| add temp1=PT(AR_CCV)-PT(AR_UNAT), temp1 |
| ld8 temp4=[temp2],PT(AR_FPSR)-PT(AR_PFS) // restore ar.pfs |
| ;; |
| mov ar.unat=temp3 |
| mov ar.pfs=temp4 |
| // ar.rnat, ar.bspstore, loadrs are restore in ia64_old_stack. |
| ld8 temp3=[temp1],PT(F6)-PT(AR_CCV) // restore ar.ccv |
| ld8 temp4=[temp2],PT(F7)-PT(AR_FPSR) // restore ar.fpsr |
| ;; |
| mov ar.ccv=temp3 |
| mov ar.fpsr=temp4 |
| ldf.fill f6=[temp1],PT(F8)-PT(F6) |
| ldf.fill f7=[temp2],PT(F9)-PT(F7) |
| ;; |
| ldf.fill f8=[temp1],PT(F10)-PT(F8) |
| ldf.fill f9=[temp2],PT(F11)-PT(F9) |
| ;; |
| ldf.fill f10=[temp1] |
| ldf.fill f11=[temp2] |
| |
| // Restore the SAL to OS state. The previous code left regs at pt_regs. |
| add regs=MCA_SOS_OFFSET-MCA_PT_REGS_OFFSET, regs |
| ;; |
| add temp1=IA64_SAL_OS_STATE_COMMON_OFFSET, regs |
| add temp2=IA64_SAL_OS_STATE_COMMON_OFFSET+8, regs |
| ;; |
| ld8 r12=[temp1],16 // sal_ra |
| ld8 r9=[temp2],16 // sal_gp |
| ;; |
| ld8 r22=[temp1],16 // pal_min_state, virtual |
| ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT |
| ;; |
| ld8 r16=[temp1],16 // prev_IA64_KR_CURRENT_STACK |
| ld8 r20=[temp2],16 // prev_task |
| ;; |
| ld8 temp3=[temp1],16 // cr.isr |
| ld8 temp4=[temp2],16 // cr.ifa |
| ;; |
| mov cr.isr=temp3 |
| mov cr.ifa=temp4 |
| ld8 temp3=[temp1],16 // cr.itir |
| ld8 temp4=[temp2],16 // cr.iipa |
| ;; |
| mov cr.itir=temp3 |
| mov cr.iipa=temp4 |
| ld8 temp3=[temp1],16 // cr.iim |
| ld8 temp4=[temp2],16 // cr.iha |
| ;; |
| mov cr.iim=temp3 |
| mov cr.iha=temp4 |
| dep r22=0,r22,62,1 // pal_min_state, physical, uncached |
| mov IA64_KR(CURRENT)=r21 |
| ld8 r8=[temp1] // os_status |
| ld8 r10=[temp2] // context |
| |
| /* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to. To |
| * avoid any dependencies on the algorithm in ia64_switch_to(), just |
| * purge any existing CURRENT_STACK mapping and insert the new one. |
| * |
| * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains |
| * prev_IA64_KR_CURRENT, these values may have been changed by the C |
| * code. Do not use r8, r9, r10, r22, they contain values ready for |
| * the return to SAL. |
| */ |
| |
| mov r15=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK |
| ;; |
| shl r15=r15,IA64_GRANULE_SHIFT |
| ;; |
| dep r15=-1,r15,61,3 // virtual granule |
| mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps |
| ;; |
| ptr.d r15,r18 |
| ;; |
| srlz.d |
| |
| extr.u r19=r21,61,3 // r21 = prev_IA64_KR_CURRENT |
| shl r20=r16,IA64_GRANULE_SHIFT // r16 = prev_IA64_KR_CURRENT_STACK |
| movl r21=PAGE_KERNEL // page properties |
| ;; |
| mov IA64_KR(CURRENT_STACK)=r16 |
| cmp.ne p6,p0=RGN_KERNEL,r19 // new stack is in the kernel region? |
| or r21=r20,r21 // construct PA | page properties |
| (p6) br.spnt 1f // the dreaded cpu 0 idle task in region 5:( |
| ;; |
| mov cr.itir=r18 |
| mov cr.ifa=r21 |
| mov r20=IA64_TR_CURRENT_STACK |
| ;; |
| itr.d dtr[r20]=r21 |
| ;; |
| srlz.d |
| 1: |
| |
| br.sptk b0 |
| |
| //EndStub////////////////////////////////////////////////////////////////////// |
| |
| |
| //++ |
| // Name: |
| // ia64_new_stack() |
| // |
| // Stub Description: |
| // |
| // Switch to the MCA/INIT stack. |
| // |
| // r2 contains the return address, r3 contains either |
| // IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. |
| // |
| // On entry RBS is still on the original stack, this routine switches RBS |
| // to use the MCA/INIT stack. |
| // |
| // On entry, sos->pal_min_state is physical, on exit it is virtual. |
| // |
| //-- |
| |
| ia64_new_stack: |
| add regs=MCA_PT_REGS_OFFSET, r3 |
| add temp2=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, r3 |
| mov b0=r2 // save return address |
| GET_IA64_MCA_DATA(temp1) |
| invala |
| ;; |
| add temp2=temp2, temp1 // struct ia64_sal_os_state.pal_min_state on MCA or INIT stack |
| add regs=regs, temp1 // struct pt_regs on MCA or INIT stack |
| ;; |
| // Address of minstate area provided by PAL is physical, uncacheable. |
| // Convert to Linux virtual address in region 6 for C code. |
| ld8 ms=[temp2] // pal_min_state, physical |
| ;; |
| dep temp1=-1,ms,62,2 // set region 6 |
| mov temp3=IA64_RBS_OFFSET-MCA_PT_REGS_OFFSET |
| ;; |
| st8 [temp2]=temp1 // pal_min_state, virtual |
| |
| add temp4=temp3, regs // start of bspstore on new stack |
| ;; |
| mov ar.bspstore=temp4 // switch RBS to MCA/INIT stack |
| ;; |
| flushrs // must be first in group |
| br.sptk b0 |
| |
| //EndStub////////////////////////////////////////////////////////////////////// |
| |
| |
| //++ |
| // Name: |
| // ia64_old_stack() |
| // |
| // Stub Description: |
| // |
| // Switch to the old stack. |
| // |
| // r2 contains the return address, r3 contains either |
| // IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. |
| // |
| // On entry, pal_min_state is virtual, on exit it is physical. |
| // |
| // On entry RBS is on the MCA/INIT stack, this routine switches RBS |
| // back to the previous stack. |
| // |
| // The psr is set to all zeroes. SAL return requires either all zeroes or |
| // just psr.mc set. Leaving psr.mc off allows INIT to be issued if this |
| // code does not perform correctly. |
| // |
| // The dirty registers at the time of the event were flushed to the |
| // MCA/INIT stack in ia64_pt_regs_save(). Restore the dirty registers |
| // before reverting to the previous bspstore. |
| //-- |
| |
| ia64_old_stack: |
| add regs=MCA_PT_REGS_OFFSET, r3 |
| mov b0=r2 // save return address |
| GET_IA64_MCA_DATA(temp2) |
| LOAD_PHYSICAL(p0,temp1,1f) |
| ;; |
| mov cr.ipsr=r0 |
| mov cr.ifs=r0 |
| mov cr.iip=temp1 |
| ;; |
| invala |
| rfi |
| 1: |
| |
| add regs=regs, temp2 // struct pt_regs on MCA or INIT stack |
| ;; |
| add temp1=PT(LOADRS), regs |
| ;; |
| ld8 temp2=[temp1],PT(AR_BSPSTORE)-PT(LOADRS) // restore loadrs |
| ;; |
| ld8 temp3=[temp1],PT(AR_RNAT)-PT(AR_BSPSTORE) // restore ar.bspstore |
| mov ar.rsc=temp2 |
| ;; |
| loadrs |
| ld8 temp4=[temp1] // restore ar.rnat |
| ;; |
| mov ar.bspstore=temp3 // back to old stack |
| ;; |
| mov ar.rnat=temp4 |
| ;; |
| |
| br.sptk b0 |
| |
| //EndStub////////////////////////////////////////////////////////////////////// |
| |
| |
| //++ |
| // Name: |
| // ia64_set_kernel_registers() |
| // |
| // Stub Description: |
| // |
| // Set the registers that are required by the C code in order to run on an |
| // MCA/INIT stack. |
| // |
| // r2 contains the return address, r3 contains either |
| // IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. |
| // |
| //-- |
| |
| ia64_set_kernel_registers: |
| add temp3=MCA_SP_OFFSET, r3 |
| add temp4=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_OS_GP_OFFSET, r3 |
| mov b0=r2 // save return address |
| GET_IA64_MCA_DATA(temp1) |
| ;; |
| add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp |
| add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack |
| add r13=temp1, r3 // set current to start of MCA/INIT stack |
| add r20=temp1, r3 // physical start of MCA/INIT stack |
| ;; |
| ld8 r1=[temp4] // OS GP from SAL OS state |
| ;; |
| DATA_PA_TO_VA(r1,temp1) |
| DATA_PA_TO_VA(r12,temp2) |
| DATA_PA_TO_VA(r13,temp3) |
| ;; |
| mov IA64_KR(CURRENT)=r13 |
| |
| /* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack. To avoid |
| * any dependencies on the algorithm in ia64_switch_to(), just purge |
| * any existing CURRENT_STACK mapping and insert the new one. |
| */ |
| |
| mov r16=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK |
| ;; |
| shl r16=r16,IA64_GRANULE_SHIFT |
| ;; |
| dep r16=-1,r16,61,3 // virtual granule |
| mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps |
| ;; |
| ptr.d r16,r18 |
| ;; |
| srlz.d |
| |
| shr.u r16=r20,IA64_GRANULE_SHIFT // r20 = physical start of MCA/INIT stack |
| movl r21=PAGE_KERNEL // page properties |
| ;; |
| mov IA64_KR(CURRENT_STACK)=r16 |
| or r21=r20,r21 // construct PA | page properties |
| ;; |
| mov cr.itir=r18 |
| mov cr.ifa=r13 |
| mov r20=IA64_TR_CURRENT_STACK |
| ;; |
| itr.d dtr[r20]=r21 |
| ;; |
| srlz.d |
| |
| br.sptk b0 |
| |
| //EndStub////////////////////////////////////////////////////////////////////// |
| |
| #undef ms |
| #undef regs |
| #undef temp1 |
| #undef temp2 |
| #undef temp3 |
| #undef temp4 |
| |
| |
| // Support function for mca.c, it is here to avoid using inline asm. Given the |
| // address of an rnat slot, if that address is below the current ar.bspstore |
| // then return the contents of that slot, otherwise return the contents of |
| // ar.rnat. |
| GLOBAL_ENTRY(ia64_get_rnat) |
| alloc r14=ar.pfs,1,0,0,0 |
| mov ar.rsc=0 |
| ;; |
| mov r14=ar.bspstore |
| ;; |
| cmp.lt p6,p7=in0,r14 |
| ;; |
| (p6) ld8 r8=[in0] |
| (p7) mov r8=ar.rnat |
| mov ar.rsc=3 |
| br.ret.sptk.many rp |
| END(ia64_get_rnat) |