| /* |
| * File: arch/blackfin/mach-common/ints-priority-sc.c |
| * Based on: |
| * Author: |
| * |
| * Created: ? |
| * Description: Set up the interrupt priorities |
| * |
| * Modified: |
| * 1996 Roman Zippel |
| * 1999 D. Jeff Dionne <jeff@uclinux.org> |
| * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> |
| * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> |
| * 2003 Metrowerks/Motorola |
| * 2003 Bas Vermeulen <bas@buyways.nl> |
| * Copyright 2004-2007 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/seq_file.h> |
| #include <linux/irq.h> |
| #ifdef CONFIG_KGDB |
| #include <linux/kgdb.h> |
| #endif |
| #include <asm/traps.h> |
| #include <asm/blackfin.h> |
| #include <asm/gpio.h> |
| #include <asm/irq_handler.h> |
| |
| #ifdef BF537_FAMILY |
| # define BF537_GENERIC_ERROR_INT_DEMUX |
| #else |
| # undef BF537_GENERIC_ERROR_INT_DEMUX |
| #endif |
| |
| /* |
| * NOTES: |
| * - we have separated the physical Hardware interrupt from the |
| * levels that the LINUX kernel sees (see the description in irq.h) |
| * - |
| */ |
| |
| unsigned long irq_flags = 0; |
| |
| /* The number of spurious interrupts */ |
| atomic_t num_spurious; |
| |
| struct ivgx { |
| /* irq number for request_irq, available in mach-bf533/irq.h */ |
| unsigned int irqno; |
| /* corresponding bit in the SIC_ISR register */ |
| unsigned int isrflag; |
| } ivg_table[NR_PERI_INTS]; |
| |
| struct ivg_slice { |
| /* position of first irq in ivg_table for given ivg */ |
| struct ivgx *ifirst; |
| struct ivgx *istop; |
| } ivg7_13[IVG13 - IVG7 + 1]; |
| |
| static void search_IAR(void); |
| |
| /* |
| * Search SIC_IAR and fill tables with the irqvalues |
| * and their positions in the SIC_ISR register. |
| */ |
| static void __init search_IAR(void) |
| { |
| unsigned ivg, irq_pos = 0; |
| for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) { |
| int irqn; |
| |
| ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos]; |
| |
| for (irqn = 0; irqn < NR_PERI_INTS; irqn++) { |
| int iar_shift = (irqn & 7) * 4; |
| if (ivg == |
| (0xf & |
| bfin_read32((unsigned long *)SIC_IAR0 + |
| (irqn >> 3)) >> iar_shift)) { |
| ivg_table[irq_pos].irqno = IVG7 + irqn; |
| ivg_table[irq_pos].isrflag = 1 << (irqn % 32); |
| ivg7_13[ivg].istop++; |
| irq_pos++; |
| } |
| } |
| } |
| } |
| |
| /* |
| * This is for BF533 internal IRQs |
| */ |
| |
| static void ack_noop(unsigned int irq) |
| { |
| /* Dummy function. */ |
| } |
| |
| static void bfin_core_mask_irq(unsigned int irq) |
| { |
| irq_flags &= ~(1 << irq); |
| if (!irqs_disabled()) |
| local_irq_enable(); |
| } |
| |
| static void bfin_core_unmask_irq(unsigned int irq) |
| { |
| irq_flags |= 1 << irq; |
| /* |
| * If interrupts are enabled, IMASK must contain the same value |
| * as irq_flags. Make sure that invariant holds. If interrupts |
| * are currently disabled we need not do anything; one of the |
| * callers will take care of setting IMASK to the proper value |
| * when reenabling interrupts. |
| * local_irq_enable just does "STI irq_flags", so it's exactly |
| * what we need. |
| */ |
| if (!irqs_disabled()) |
| local_irq_enable(); |
| return; |
| } |
| |
| static void bfin_internal_mask_irq(unsigned int irq) |
| { |
| #ifndef CONFIG_BF54x |
| bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & |
| ~(1 << (irq - (IRQ_CORETMR + 1)))); |
| #else |
| unsigned mask_bank, mask_bit; |
| mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; |
| mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; |
| bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & |
| ~(1 << mask_bit)); |
| #endif |
| SSYNC(); |
| } |
| |
| static void bfin_internal_unmask_irq(unsigned int irq) |
| { |
| #ifndef CONFIG_BF54x |
| bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | |
| (1 << (irq - (IRQ_CORETMR + 1)))); |
| #else |
| unsigned mask_bank, mask_bit; |
| mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; |
| mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; |
| bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | |
| (1 << mask_bit)); |
| #endif |
| SSYNC(); |
| } |
| |
| static struct irq_chip bfin_core_irqchip = { |
| .ack = ack_noop, |
| .mask = bfin_core_mask_irq, |
| .unmask = bfin_core_unmask_irq, |
| }; |
| |
| static struct irq_chip bfin_internal_irqchip = { |
| .ack = ack_noop, |
| .mask = bfin_internal_mask_irq, |
| .unmask = bfin_internal_unmask_irq, |
| }; |
| |
| #ifdef BF537_GENERIC_ERROR_INT_DEMUX |
| static int error_int_mask; |
| |
| static void bfin_generic_error_ack_irq(unsigned int irq) |
| { |
| |
| } |
| |
| static void bfin_generic_error_mask_irq(unsigned int irq) |
| { |
| error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR)); |
| |
| if (!error_int_mask) { |
| local_irq_disable(); |
| bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & |
| ~(1 << |
| (IRQ_GENERIC_ERROR - |
| (IRQ_CORETMR + 1)))); |
| SSYNC(); |
| local_irq_enable(); |
| } |
| } |
| |
| static void bfin_generic_error_unmask_irq(unsigned int irq) |
| { |
| local_irq_disable(); |
| bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 << |
| (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1))); |
| SSYNC(); |
| local_irq_enable(); |
| |
| error_int_mask |= 1L << (irq - IRQ_PPI_ERROR); |
| } |
| |
| static struct irq_chip bfin_generic_error_irqchip = { |
| .ack = bfin_generic_error_ack_irq, |
| .mask = bfin_generic_error_mask_irq, |
| .unmask = bfin_generic_error_unmask_irq, |
| }; |
| |
| static void bfin_demux_error_irq(unsigned int int_err_irq, |
| struct irq_desc *intb_desc) |
| { |
| int irq = 0; |
| |
| SSYNC(); |
| |
| #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) |
| if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) |
| irq = IRQ_MAC_ERROR; |
| else |
| #endif |
| if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK) |
| irq = IRQ_SPORT0_ERROR; |
| else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK) |
| irq = IRQ_SPORT1_ERROR; |
| else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK) |
| irq = IRQ_PPI_ERROR; |
| else if (bfin_read_CAN_GIF() & CAN_ERR_MASK) |
| irq = IRQ_CAN_ERROR; |
| else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) |
| irq = IRQ_SPI_ERROR; |
| else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) && |
| (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0)) |
| irq = IRQ_UART0_ERROR; |
| else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) && |
| (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0)) |
| irq = IRQ_UART1_ERROR; |
| |
| if (irq) { |
| if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) { |
| struct irq_desc *desc = irq_desc + irq; |
| desc->handle_irq(irq, desc); |
| } else { |
| |
| switch (irq) { |
| case IRQ_PPI_ERROR: |
| bfin_write_PPI_STATUS(PPI_ERR_MASK); |
| break; |
| #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) |
| case IRQ_MAC_ERROR: |
| bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK); |
| break; |
| #endif |
| case IRQ_SPORT0_ERROR: |
| bfin_write_SPORT0_STAT(SPORT_ERR_MASK); |
| break; |
| |
| case IRQ_SPORT1_ERROR: |
| bfin_write_SPORT1_STAT(SPORT_ERR_MASK); |
| break; |
| |
| case IRQ_CAN_ERROR: |
| bfin_write_CAN_GIS(CAN_ERR_MASK); |
| break; |
| |
| case IRQ_SPI_ERROR: |
| bfin_write_SPI_STAT(SPI_ERR_MASK); |
| break; |
| |
| default: |
| break; |
| } |
| |
| pr_debug("IRQ %d:" |
| " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", |
| irq); |
| } |
| } else |
| printk(KERN_ERR |
| "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR" |
| " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", |
| __FUNCTION__, __FILE__, __LINE__); |
| |
| } |
| #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ |
| |
| #if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x) |
| |
| static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; |
| static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; |
| |
| static void bfin_gpio_ack_irq(unsigned int irq) |
| { |
| u16 gpionr = irq - IRQ_PF0; |
| |
| if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { |
| set_gpio_data(gpionr, 0); |
| SSYNC(); |
| } |
| } |
| |
| static void bfin_gpio_mask_ack_irq(unsigned int irq) |
| { |
| u16 gpionr = irq - IRQ_PF0; |
| |
| if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { |
| set_gpio_data(gpionr, 0); |
| SSYNC(); |
| } |
| |
| set_gpio_maska(gpionr, 0); |
| SSYNC(); |
| } |
| |
| static void bfin_gpio_mask_irq(unsigned int irq) |
| { |
| set_gpio_maska(irq - IRQ_PF0, 0); |
| SSYNC(); |
| } |
| |
| static void bfin_gpio_unmask_irq(unsigned int irq) |
| { |
| set_gpio_maska(irq - IRQ_PF0, 1); |
| SSYNC(); |
| } |
| |
| static unsigned int bfin_gpio_irq_startup(unsigned int irq) |
| { |
| unsigned int ret; |
| u16 gpionr = irq - IRQ_PF0; |
| |
| if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { |
| ret = gpio_request(gpionr, NULL); |
| if (ret) |
| return ret; |
| } |
| |
| gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); |
| bfin_gpio_unmask_irq(irq); |
| |
| return ret; |
| } |
| |
| static void bfin_gpio_irq_shutdown(unsigned int irq) |
| { |
| bfin_gpio_mask_irq(irq); |
| gpio_free(irq - IRQ_PF0); |
| gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); |
| } |
| |
| static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) |
| { |
| |
| unsigned int ret; |
| u16 gpionr = irq - IRQ_PF0; |
| |
| if (type == IRQ_TYPE_PROBE) { |
| /* only probe unenabled GPIO interrupt lines */ |
| if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) |
| return 0; |
| type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; |
| } |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | |
| IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { |
| if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { |
| ret = gpio_request(gpionr, NULL); |
| if (ret) |
| return ret; |
| } |
| |
| gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); |
| } else { |
| gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); |
| return 0; |
| } |
| |
| set_gpio_dir(gpionr, 0); |
| set_gpio_inen(gpionr, 1); |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { |
| gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr); |
| set_gpio_edge(gpionr, 1); |
| } else { |
| set_gpio_edge(gpionr, 0); |
| gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); |
| } |
| |
| if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) |
| == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) |
| set_gpio_both(gpionr, 1); |
| else |
| set_gpio_both(gpionr, 0); |
| |
| if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) |
| set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */ |
| else |
| set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */ |
| |
| SSYNC(); |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) |
| set_irq_handler(irq, handle_edge_irq); |
| else |
| set_irq_handler(irq, handle_level_irq); |
| |
| return 0; |
| } |
| |
| static struct irq_chip bfin_gpio_irqchip = { |
| .ack = bfin_gpio_ack_irq, |
| .mask = bfin_gpio_mask_irq, |
| .mask_ack = bfin_gpio_mask_ack_irq, |
| .unmask = bfin_gpio_unmask_irq, |
| .set_type = bfin_gpio_irq_type, |
| .startup = bfin_gpio_irq_startup, |
| .shutdown = bfin_gpio_irq_shutdown |
| }; |
| |
| static void bfin_demux_gpio_irq(unsigned int intb_irq, |
| struct irq_desc *intb_desc) |
| { |
| u16 i; |
| struct irq_desc *desc; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) { |
| int irq = IRQ_PF0 + i; |
| int flag_d = get_gpiop_data(i); |
| int mask = |
| flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i)); |
| |
| while (mask) { |
| if (mask & 1) { |
| desc = irq_desc + irq; |
| desc->handle_irq(irq, desc); |
| } |
| irq++; |
| mask >>= 1; |
| } |
| } |
| } |
| |
| #else /* CONFIG_IRQCHIP_DEMUX_GPIO */ |
| |
| #define NR_PINT_SYS_IRQS 4 |
| #define NR_PINT_BITS 32 |
| #define NR_PINTS 160 |
| #define IRQ_NOT_AVAIL 0xFF |
| |
| #define PINT_2_BANK(x) ((x) >> 5) |
| #define PINT_2_BIT(x) ((x) & 0x1F) |
| #define PINT_BIT(x) (1 << (PINT_2_BIT(x))) |
| |
| static unsigned char irq2pint_lut[NR_PINTS]; |
| static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; |
| |
| struct pin_int_t { |
| unsigned int mask_set; |
| unsigned int mask_clear; |
| unsigned int request; |
| unsigned int assign; |
| unsigned int edge_set; |
| unsigned int edge_clear; |
| unsigned int invert_set; |
| unsigned int invert_clear; |
| unsigned int pinstate; |
| unsigned int latch; |
| }; |
| |
| static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { |
| (struct pin_int_t *)PINT0_MASK_SET, |
| (struct pin_int_t *)PINT1_MASK_SET, |
| (struct pin_int_t *)PINT2_MASK_SET, |
| (struct pin_int_t *)PINT3_MASK_SET, |
| }; |
| |
| unsigned short get_irq_base(u8 bank, u8 bmap) |
| { |
| |
| u16 irq_base; |
| |
| if (bank < 2) { /*PA-PB */ |
| irq_base = IRQ_PA0 + bmap * 16; |
| } else { /*PC-PJ */ |
| irq_base = IRQ_PC0 + bmap * 16; |
| } |
| |
| return irq_base; |
| |
| } |
| |
| /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ |
| void init_pint_lut(void) |
| { |
| u16 bank, bit, irq_base, bit_pos; |
| u32 pint_assign; |
| u8 bmap; |
| |
| memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut)); |
| |
| for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { |
| |
| pint_assign = pint[bank]->assign; |
| |
| for (bit = 0; bit < NR_PINT_BITS; bit++) { |
| |
| bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF; |
| |
| irq_base = get_irq_base(bank, bmap); |
| |
| irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0); |
| bit_pos = bit + bank * NR_PINT_BITS; |
| |
| pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; |
| irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; |
| |
| } |
| |
| } |
| |
| } |
| |
| static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; |
| |
| static void bfin_gpio_ack_irq(unsigned int irq) |
| { |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| |
| pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val); |
| SSYNC(); |
| } |
| |
| static void bfin_gpio_mask_ack_irq(unsigned int irq) |
| { |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| u32 pintbit = PINT_BIT(pint_val); |
| u8 bank = PINT_2_BANK(pint_val); |
| |
| pint[bank]->request = pintbit; |
| pint[bank]->mask_clear = pintbit; |
| SSYNC(); |
| } |
| |
| static void bfin_gpio_mask_irq(unsigned int irq) |
| { |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| |
| pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); |
| SSYNC(); |
| } |
| |
| static void bfin_gpio_unmask_irq(unsigned int irq) |
| { |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| u32 pintbit = PINT_BIT(pint_val); |
| u8 bank = PINT_2_BANK(pint_val); |
| |
| pint[bank]->request = pintbit; |
| pint[bank]->mask_set = pintbit; |
| SSYNC(); |
| } |
| |
| static unsigned int bfin_gpio_irq_startup(unsigned int irq) |
| { |
| unsigned int ret; |
| u16 gpionr = irq - IRQ_PA0; |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| |
| if (pint_val == IRQ_NOT_AVAIL) { |
| printk(KERN_ERR |
| "GPIO IRQ %d :Not in PINT Assign table " |
| "Reconfigure Interrupt to Port Assignemt\n", irq); |
| return -ENODEV; |
| } |
| |
| if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { |
| ret = gpio_request(gpionr, NULL); |
| if (ret) |
| return ret; |
| } |
| |
| gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); |
| bfin_gpio_unmask_irq(irq); |
| |
| return ret; |
| } |
| |
| static void bfin_gpio_irq_shutdown(unsigned int irq) |
| { |
| bfin_gpio_mask_irq(irq); |
| gpio_free(irq - IRQ_PA0); |
| gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0); |
| } |
| |
| static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) |
| { |
| |
| unsigned int ret; |
| u16 gpionr = irq - IRQ_PA0; |
| u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; |
| u32 pintbit = PINT_BIT(pint_val); |
| u8 bank = PINT_2_BANK(pint_val); |
| |
| if (pint_val == IRQ_NOT_AVAIL) |
| return -ENODEV; |
| |
| if (type == IRQ_TYPE_PROBE) { |
| /* only probe unenabled GPIO interrupt lines */ |
| if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) |
| return 0; |
| type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; |
| } |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | |
| IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { |
| if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { |
| ret = gpio_request(gpionr, NULL); |
| if (ret) |
| return ret; |
| } |
| |
| gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); |
| } else { |
| gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); |
| return 0; |
| } |
| |
| gpio_direction_input(gpionr); |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { |
| pint[bank]->edge_set = pintbit; |
| } else { |
| pint[bank]->edge_clear = pintbit; |
| } |
| |
| if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) |
| pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ |
| else |
| pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */ |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) |
| pint[bank]->invert_set = pintbit; |
| else |
| pint[bank]->invert_set = pintbit; |
| |
| SSYNC(); |
| |
| if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) |
| set_irq_handler(irq, handle_edge_irq); |
| else |
| set_irq_handler(irq, handle_level_irq); |
| |
| return 0; |
| } |
| |
| static struct irq_chip bfin_gpio_irqchip = { |
| .ack = bfin_gpio_ack_irq, |
| .mask = bfin_gpio_mask_irq, |
| .mask_ack = bfin_gpio_mask_ack_irq, |
| .unmask = bfin_gpio_unmask_irq, |
| .set_type = bfin_gpio_irq_type, |
| .startup = bfin_gpio_irq_startup, |
| .shutdown = bfin_gpio_irq_shutdown |
| }; |
| |
| static void bfin_demux_gpio_irq(unsigned int intb_irq, |
| struct irq_desc *intb_desc) |
| { |
| u8 bank, pint_val; |
| u32 request, irq; |
| struct irq_desc *desc; |
| |
| switch (intb_irq) { |
| case IRQ_PINT0: |
| bank = 0; |
| break; |
| case IRQ_PINT2: |
| bank = 2; |
| break; |
| case IRQ_PINT3: |
| bank = 3; |
| break; |
| case IRQ_PINT1: |
| bank = 1; |
| break; |
| default: |
| return; |
| } |
| |
| pint_val = bank * NR_PINT_BITS; |
| |
| request = pint[bank]->request; |
| |
| while (request) { |
| if (request & 1) { |
| irq = pint2irq_lut[pint_val] + SYS_IRQS; |
| desc = irq_desc + irq; |
| desc->handle_irq(irq, desc); |
| } |
| pint_val++; |
| request >>= 1; |
| } |
| |
| } |
| #endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ |
| |
| void __init init_exception_vectors(void) |
| { |
| SSYNC(); |
| |
| #ifndef CONFIG_KGDB |
| bfin_write_EVT0(evt_emulation); |
| #endif |
| bfin_write_EVT2(evt_evt2); |
| bfin_write_EVT3(trap); |
| bfin_write_EVT5(evt_ivhw); |
| bfin_write_EVT6(evt_timer); |
| bfin_write_EVT7(evt_evt7); |
| bfin_write_EVT8(evt_evt8); |
| bfin_write_EVT9(evt_evt9); |
| bfin_write_EVT10(evt_evt10); |
| bfin_write_EVT11(evt_evt11); |
| bfin_write_EVT12(evt_evt12); |
| bfin_write_EVT13(evt_evt13); |
| bfin_write_EVT14(evt14_softirq); |
| bfin_write_EVT15(evt_system_call); |
| CSYNC(); |
| } |
| |
| /* |
| * This function should be called during kernel startup to initialize |
| * the BFin IRQ handling routines. |
| */ |
| int __init init_arch_irq(void) |
| { |
| int irq; |
| unsigned long ilat = 0; |
| /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ |
| #ifdef CONFIG_BF54x |
| bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); |
| bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); |
| bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); |
| bfin_write_SIC_IWR0(IWR_ENABLE_ALL); |
| bfin_write_SIC_IWR1(IWR_ENABLE_ALL); |
| bfin_write_SIC_IWR2(IWR_ENABLE_ALL); |
| #else |
| bfin_write_SIC_IMASK(SIC_UNMASK_ALL); |
| bfin_write_SIC_IWR(IWR_ENABLE_ALL); |
| #endif |
| SSYNC(); |
| |
| local_irq_disable(); |
| |
| #if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x) |
| #ifdef CONFIG_PINTx_REASSIGN |
| pint[0]->assign = CONFIG_PINT0_ASSIGN; |
| pint[1]->assign = CONFIG_PINT1_ASSIGN; |
| pint[2]->assign = CONFIG_PINT2_ASSIGN; |
| pint[3]->assign = CONFIG_PINT3_ASSIGN; |
| #endif |
| /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ |
| init_pint_lut(); |
| #endif |
| |
| for (irq = 0; irq <= SYS_IRQS; irq++) { |
| if (irq <= IRQ_CORETMR) |
| set_irq_chip(irq, &bfin_core_irqchip); |
| else |
| set_irq_chip(irq, &bfin_internal_irqchip); |
| #ifdef BF537_GENERIC_ERROR_INT_DEMUX |
| if (irq != IRQ_GENERIC_ERROR) { |
| #endif |
| |
| switch (irq) { |
| #ifdef CONFIG_IRQCHIP_DEMUX_GPIO |
| #ifndef CONFIG_BF54x |
| case IRQ_PROG_INTA: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| #if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) |
| case IRQ_MAC_RX: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| #endif |
| #else |
| case IRQ_PINT0: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| case IRQ_PINT1: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| case IRQ_PINT2: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| case IRQ_PINT3: |
| set_irq_chained_handler(irq, |
| bfin_demux_gpio_irq); |
| break; |
| #endif /*CONFIG_BF54x */ |
| #endif |
| default: |
| set_irq_handler(irq, handle_simple_irq); |
| break; |
| } |
| |
| #ifdef BF537_GENERIC_ERROR_INT_DEMUX |
| } else { |
| set_irq_handler(irq, bfin_demux_error_irq); |
| } |
| #endif |
| } |
| #ifdef BF537_GENERIC_ERROR_INT_DEMUX |
| for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) { |
| set_irq_chip(irq, &bfin_generic_error_irqchip); |
| set_irq_handler(irq, handle_level_irq); |
| } |
| #endif |
| |
| #ifdef CONFIG_IRQCHIP_DEMUX_GPIO |
| #ifndef CONFIG_BF54x |
| for (irq = IRQ_PF0; irq < NR_IRQS; irq++) { |
| #else |
| for (irq = IRQ_PA0; irq < NR_IRQS; irq++) { |
| #endif |
| set_irq_chip(irq, &bfin_gpio_irqchip); |
| /* if configured as edge, then will be changed to do_edge_IRQ */ |
| set_irq_handler(irq, handle_level_irq); |
| } |
| #endif |
| bfin_write_IMASK(0); |
| CSYNC(); |
| ilat = bfin_read_ILAT(); |
| CSYNC(); |
| bfin_write_ILAT(ilat); |
| CSYNC(); |
| |
| printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); |
| /* IMASK=xxx is equivalent to STI xx or irq_flags=xx, |
| * local_irq_enable() |
| */ |
| program_IAR(); |
| /* Therefore it's better to setup IARs before interrupts enabled */ |
| search_IAR(); |
| |
| /* Enable interrupts IVG7-15 */ |
| irq_flags = irq_flags | IMASK_IVG15 | |
| IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | |
| IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DO_IRQ_L1 |
| void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text)); |
| #endif |
| |
| void do_irq(int vec, struct pt_regs *fp) |
| { |
| if (vec == EVT_IVTMR_P) { |
| vec = IRQ_CORETMR; |
| } else { |
| struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; |
| struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; |
| #ifdef CONFIG_BF54x |
| unsigned long sic_status[3]; |
| |
| SSYNC(); |
| sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0); |
| sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1); |
| sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2); |
| |
| for (;; ivg++) { |
| if (ivg >= ivg_stop) { |
| atomic_inc(&num_spurious); |
| return; |
| } |
| if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) |
| break; |
| } |
| #else |
| unsigned long sic_status; |
| SSYNC(); |
| sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); |
| |
| for (;; ivg++) { |
| if (ivg >= ivg_stop) { |
| atomic_inc(&num_spurious); |
| return; |
| } else if (sic_status & ivg->isrflag) |
| break; |
| } |
| #endif |
| vec = ivg->irqno; |
| } |
| asm_do_IRQ(vec, fp); |
| |
| #ifdef CONFIG_KGDB |
| kgdb_process_breakpoint(); |
| #endif |
| } |