Gitiles
Code Review Sign In
LeafOS / LeafOS-Devices / android_kernel_samsung_exynos9820 / 3c06da5ae5358e9d325d541a053e1059e9654bcc / . / arch / powerpc / platforms / powermac / feature.c
blob: 85e00cb0006ea47c400b28141dcc33b37625e529 [file] [log] [blame]
/*
* Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
* Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* TODO:
*
* - Replace mdelay with some schedule loop if possible
* - Shorten some obfuscated delays on some routines (like modem
* power)
* - Refcount some clocks (see darwin)
* - Split split split...
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/errno.h>
#include <asm/ohare.h>
#include <asm/heathrow.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/pci-bridge.h>
#include <asm/pmac_low_i2c.h>
#undef DEBUG_FEATURE
#ifdef DEBUG_FEATURE
#define DBG(fmt...) printk(KERN_DEBUG fmt)
#else
#define DBG(fmt...)
#endif
#ifdef CONFIG_6xx
extern int powersave_lowspeed;
#endif
extern int powersave_nap;
extern struct device_node *k2_skiplist[2];
/*
* We use a single global lock to protect accesses. Each driver has
* to take care of its own locking
*/
DEFINE_SPINLOCK(feature_lock);
#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
/*
* Instance of some macio stuffs
*/
struct macio_chip macio_chips[MAX_MACIO_CHIPS];
struct macio_chip *macio_find(struct device_node *child, int type)
{
while(child) {
int i;
for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
if (child == macio_chips[i].of_node &&
(!type || macio_chips[i].type == type))
return &macio_chips[i];
child = child->parent;
}
return NULL;
}
EXPORT_SYMBOL_GPL(macio_find);
static const char *macio_names[] =
{
"Unknown",
"Grand Central",
"OHare",
"OHareII",
"Heathrow",
"Gatwick",
"Paddington",
"Keylargo",
"Pangea",
"Intrepid",
"K2",
"Shasta",
};
struct device_node *uninorth_node;
u32 __iomem *uninorth_base;
static u32 uninorth_rev;
static int uninorth_maj;
static void __iomem *u3_ht_base;
/*
* For each motherboard family, we have a table of functions pointers
* that handle the various features.
*/
typedef long (*feature_call)(struct device_node *node, long param, long value);
struct feature_table_entry {
unsigned int selector;
feature_call function;
};
struct pmac_mb_def
{
const char* model_string;
const char* model_name;
int model_id;
struct feature_table_entry* features;
unsigned long board_flags;
};
static struct pmac_mb_def pmac_mb;
/*
* Here are the chip specific feature functions
*/
static inline int simple_feature_tweak(struct device_node *node, int type,
int reg, u32 mask, int value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, type);
if (!macio)
return -ENODEV;
LOCK(flags);
if (value)
MACIO_BIS(reg, mask);
else
MACIO_BIC(reg, mask);
(void)MACIO_IN32(reg);
UNLOCK(flags);
return 0;
}
#ifndef CONFIG_POWER4
static long ohare_htw_scc_enable(struct device_node *node, long param,
long value)
{
struct macio_chip* macio;
unsigned long chan_mask;
unsigned long fcr;
unsigned long flags;
int htw, trans;
unsigned long rmask;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (!strcmp(node->name, "ch-a"))
chan_mask = MACIO_FLAG_SCCA_ON;
else if (!strcmp(node->name, "ch-b"))
chan_mask = MACIO_FLAG_SCCB_ON;
else
return -ENODEV;
htw = (macio->type == macio_heathrow || macio->type == macio_paddington
|| macio->type == macio_gatwick);
/* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
pmac_mb.model_id != PMAC_TYPE_YIKES);
if (value) {
#ifdef CONFIG_ADB_PMU
if ((param & 0xfff) == PMAC_SCC_IRDA)
pmu_enable_irled(1);
#endif /* CONFIG_ADB_PMU */
LOCK(flags);
fcr = MACIO_IN32(OHARE_FCR);
/* Check if scc cell need enabling */
if (!(fcr & OH_SCC_ENABLE)) {
fcr |= OH_SCC_ENABLE;
if (htw) {
/* Side effect: this will also power up the
* modem, but it's too messy to figure out on which
* ports this controls the tranceiver and on which
* it controls the modem
*/
if (trans)
fcr &= ~HRW_SCC_TRANS_EN_N;
MACIO_OUT32(OHARE_FCR, fcr);
fcr |= (rmask = HRW_RESET_SCC);
MACIO_OUT32(OHARE_FCR, fcr);
} else {
fcr |= (rmask = OH_SCC_RESET);
MACIO_OUT32(OHARE_FCR, fcr);
}
UNLOCK(flags);
(void)MACIO_IN32(OHARE_FCR);
mdelay(15);
LOCK(flags);
fcr &= ~rmask;
MACIO_OUT32(OHARE_FCR, fcr);
}
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr |= OH_SCCA_IO;
if (chan_mask & MACIO_FLAG_SCCB_ON)
fcr |= OH_SCCB_IO;
MACIO_OUT32(OHARE_FCR, fcr);
macio->flags |= chan_mask;
UNLOCK(flags);
if (param & PMAC_SCC_FLAG_XMON)
macio->flags |= MACIO_FLAG_SCC_LOCKED;
} else {
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
return -EPERM;
LOCK(flags);
fcr = MACIO_IN32(OHARE_FCR);
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr &= ~OH_SCCA_IO;
if (chan_mask & MACIO_FLAG_SCCB_ON)
fcr &= ~OH_SCCB_IO;
MACIO_OUT32(OHARE_FCR, fcr);
if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
fcr &= ~OH_SCC_ENABLE;
if (htw && trans)
fcr |= HRW_SCC_TRANS_EN_N;
MACIO_OUT32(OHARE_FCR, fcr);
}
macio->flags &= ~(chan_mask);
UNLOCK(flags);
mdelay(10);
#ifdef CONFIG_ADB_PMU
if ((param & 0xfff) == PMAC_SCC_IRDA)
pmu_enable_irled(0);
#endif /* CONFIG_ADB_PMU */
}
return 0;
}
static long ohare_floppy_enable(struct device_node *node, long param,
long value)
{
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_FLOPPY_ENABLE, value);
}
static long ohare_mesh_enable(struct device_node *node, long param, long value)
{
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_MESH_ENABLE, value);
}
static long ohare_ide_enable(struct device_node *node, long param, long value)
{
switch(param) {
case 0:
/* For some reason, setting the bit in set_initial_features()
* doesn't stick. I'm still investigating... --BenH.
*/
if (value)
simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IOBUS_ENABLE, 1);
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_BAY_IDE_ENABLE, value);
default:
return -ENODEV;
}
}
static long ohare_ide_reset(struct device_node *node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE1_RESET_N, !value);
default:
return -ENODEV;
}
}
static long ohare_sleep_state(struct device_node *node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
if (value == 1) {
MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
} else if (value == 0) {
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
}
return 0;
}
static long heathrow_modem_enable(struct device_node *node, long param,
long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
macio = macio_find(node, macio_unknown);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
if (!value) {
LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
mdelay(250);
}
if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
pmac_mb.model_id != PMAC_TYPE_YIKES) {
LOCK(flags);
if (value)
MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
else
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(250);
}
if (value) {
LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long heathrow_floppy_enable(struct device_node *node, long param,
long value)
{
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR,
HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
value);
}
static long heathrow_mesh_enable(struct device_node *node, long param,
long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, macio_unknown);
if (!macio)
return -ENODEV;
LOCK(flags);
/* Set clear mesh cell enable */
if (value)
MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
else
MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
(void)MACIO_IN32(HEATHROW_FCR);
udelay(10);
/* Set/Clear termination power */
if (value)
MACIO_BIC(HEATHROW_MBCR, 0x04000000);
else
MACIO_BIS(HEATHROW_MBCR, 0x04000000);
(void)MACIO_IN32(HEATHROW_MBCR);
udelay(10);
UNLOCK(flags);
return 0;
}
static long heathrow_ide_enable(struct device_node *node, long param,
long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
default:
return -ENODEV;
}
}
static long heathrow_ide_reset(struct device_node *node, long param,
long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
default:
return -ENODEV;
}
}
static long heathrow_bmac_enable(struct device_node *node, long param,
long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (value) {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(10);
LOCK(flags);
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(10);
} else {
LOCK(flags);
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
UNLOCK(flags);
}
return 0;
}
static long heathrow_sound_enable(struct device_node *node, long param,
long value)
{
struct macio_chip* macio;
unsigned long flags;
/* B&W G3 and Yikes don't support that properly (the
* sound appear to never come back after beeing shut down).
*/
if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
pmac_mb.model_id == PMAC_TYPE_YIKES)
return 0;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (value) {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
} else {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
UNLOCK(flags);
}
return 0;
}
static u32 save_fcr[6];
static u32 save_mbcr;
static u32 save_gpio_levels[2];
static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
static u32 save_unin_clock_ctl;
static struct dbdma_regs save_dbdma[13];
static struct dbdma_regs save_alt_dbdma[13];
static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
{
int i;
/* Save state & config of DBDMA channels */
for (i = 0; i < 13; i++) {
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
(macio->base + ((0x8000+i*0x100)>>2));
save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
save[i].cmdptr = in_le32(&chan->cmdptr);
save[i].intr_sel = in_le32(&chan->intr_sel);
save[i].br_sel = in_le32(&chan->br_sel);
save[i].wait_sel = in_le32(&chan->wait_sel);
}
}
static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
{
int i;
/* Save state & config of DBDMA channels */
for (i = 0; i < 13; i++) {
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
(macio->base + ((0x8000+i*0x100)>>2));
out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
while (in_le32(&chan->status) & ACTIVE)
mb();
out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
out_le32(&chan->cmdptr, save[i].cmdptr);
out_le32(&chan->intr_sel, save[i].intr_sel);
out_le32(&chan->br_sel, save[i].br_sel);
out_le32(&chan->wait_sel, save[i].wait_sel);
}
}
static void heathrow_sleep(struct macio_chip *macio, int secondary)
{
if (secondary) {
dbdma_save(macio, save_alt_dbdma);
save_fcr[2] = MACIO_IN32(0x38);
save_fcr[3] = MACIO_IN32(0x3c);
} else {
dbdma_save(macio, save_dbdma);
save_fcr[0] = MACIO_IN32(0x38);
save_fcr[1] = MACIO_IN32(0x3c);
save_mbcr = MACIO_IN32(0x34);
/* Make sure sound is shut down */
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
/* This seems to be necessary as well or the fan
* keeps coming up and battery drains fast */
MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
/* Make sure eth is down even if module or sleep
* won't work properly */
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
}
/* Make sure modem is shut down */
MACIO_OUT8(HRW_GPIO_MODEM_RESET,
MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
/* Let things settle */
(void)MACIO_IN32(HEATHROW_FCR);
}
static void heathrow_wakeup(struct macio_chip *macio, int secondary)
{
if (secondary) {
MACIO_OUT32(0x38, save_fcr[2]);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x3c, save_fcr[3]);
(void)MACIO_IN32(0x38);
mdelay(10);
dbdma_restore(macio, save_alt_dbdma);
} else {
MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x3c, save_fcr[1]);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x34, save_mbcr);
(void)MACIO_IN32(0x38);
mdelay(10);
dbdma_restore(macio, save_dbdma);
}
}
static long heathrow_sleep_state(struct device_node *node, long param,
long value)
{
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
if (value == 1) {
if (macio_chips[1].type == macio_gatwick)
heathrow_sleep(&macio_chips[0], 1);
heathrow_sleep(&macio_chips[0], 0);
} else if (value == 0) {
heathrow_wakeup(&macio_chips[0], 0);
if (macio_chips[1].type == macio_gatwick)
heathrow_wakeup(&macio_chips[0], 1);
}
return 0;
}
static long core99_scc_enable(struct device_node *node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
unsigned long chan_mask;
u32 fcr;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (!strcmp(node->name, "ch-a"))
chan_mask = MACIO_FLAG_SCCA_ON;
else if (!strcmp(node->name, "ch-b"))
chan_mask = MACIO_FLAG_SCCB_ON;
else
return -ENODEV;
if (value) {
int need_reset_scc = 0;
int need_reset_irda = 0;
LOCK(flags);
fcr = MACIO_IN32(KEYLARGO_FCR0);
/* Check if scc cell need enabling */
if (!(fcr & KL0_SCC_CELL_ENABLE)) {
fcr |= KL0_SCC_CELL_ENABLE;
need_reset_scc = 1;
}
if (chan_mask & MACIO_FLAG_SCCA_ON) {
fcr |= KL0_SCCA_ENABLE;
/* Don't enable line drivers for I2S modem */
if ((param & 0xfff) == PMAC_SCC_I2S1)
fcr &= ~KL0_SCC_A_INTF_ENABLE;
else
fcr |= KL0_SCC_A_INTF_ENABLE;
}
if (chan_mask & MACIO_FLAG_SCCB_ON) {
fcr |= KL0_SCCB_ENABLE;
/* Perform irda specific inits */
if ((param & 0xfff) == PMAC_SCC_IRDA) {
fcr &= ~KL0_SCC_B_INTF_ENABLE;
fcr |= KL0_IRDA_ENABLE;
fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
fcr |= KL0_IRDA_SOURCE1_SEL;
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
need_reset_irda = 1;
} else
fcr |= KL0_SCC_B_INTF_ENABLE;
}
MACIO_OUT32(KEYLARGO_FCR0, fcr);
macio->flags |= chan_mask;
if (need_reset_scc) {
MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(15);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
}
if (need_reset_irda) {
MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(15);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
}
UNLOCK(flags);
if (param & PMAC_SCC_FLAG_XMON)
macio->flags |= MACIO_FLAG_SCC_LOCKED;
} else {
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
return -EPERM;
LOCK(flags);
fcr = MACIO_IN32(KEYLARGO_FCR0);
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr &= ~KL0_SCCA_ENABLE;
if (chan_mask & MACIO_FLAG_SCCB_ON) {
fcr &= ~KL0_SCCB_ENABLE;
/* Perform irda specific clears */
if ((param & 0xfff) == PMAC_SCC_IRDA) {
fcr &= ~KL0_IRDA_ENABLE;
fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
}
}
MACIO_OUT32(KEYLARGO_FCR0, fcr);
if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
fcr &= ~KL0_SCC_CELL_ENABLE;
MACIO_OUT32(KEYLARGO_FCR0, fcr);
}
macio->flags &= ~(chan_mask);
UNLOCK(flags);
mdelay(10);
}
return 0;
}
static long
core99_modem_enable(struct device_node *node, long param, long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
/* Hack for internal USB modem */
if (node == NULL) {
if (macio_chips[0].type != macio_keylargo)
return -ENODEV;
node = macio_chips[0].of_node;
}
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
if (!value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
mdelay(250);
}
LOCK(flags);
if (value) {
MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR2);
mdelay(250);
} else {
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
UNLOCK(flags);
}
if (value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long
pangea_modem_enable(struct device_node *node, long param, long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
/* Hack for internal USB modem */
if (node == NULL) {
if (macio_chips[0].type != macio_pangea &&
macio_chips[0].type != macio_intrepid)
return -ENODEV;
node = macio_chips[0].of_node;
}
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
if (!value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
mdelay(250);
}
LOCK(flags);
if (value) {
MACIO_OUT8(KL_GPIO_MODEM_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE);
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR2);
mdelay(250);
} else {
MACIO_OUT8(KL_GPIO_MODEM_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
UNLOCK(flags);
}
if (value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long
core99_ata100_enable(struct device_node *node, long value)
{
unsigned long flags;
struct pci_dev *pdev = NULL;
u8 pbus, pid;
if (uninorth_rev < 0x24)
return -ENODEV;
LOCK(flags);
if (value)
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
else
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
(void)UN_IN(UNI_N_CLOCK_CNTL);
UNLOCK(flags);
udelay(20);
if (value) {
if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
pdev = pci_find_slot(pbus, pid);
if (pdev == NULL)
return 0;
pci_enable_device(pdev);
pci_set_master(pdev);
}
return 0;
}
static long
core99_ide_enable(struct device_node *node, long param, long value)
{
/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
* based ata-100
*/
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
case 2:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
case 3:
return core99_ata100_enable(node, value);
default:
return -ENODEV;
}
}
static long
core99_ide_reset(struct device_node *node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
case 2:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
default:
return -ENODEV;
}
}
static long
core99_gmac_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
LOCK(flags);
if (value)
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
else
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
(void)UN_IN(UNI_N_CLOCK_CNTL);
UNLOCK(flags);
udelay(20);
return 0;
}
static long
core99_gmac_phy_reset(struct device_node *node, long param, long value)
{
unsigned long flags;
struct macio_chip *macio;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
LOCK(flags);
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
KEYLARGO_GPIO_OUTOUT_DATA);
UNLOCK(flags);
mdelay(10);
return 0;
}
static long
core99_sound_chip_enable(struct device_node *node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
/* Do a better probe code, screamer G4 desktops &
* iMacs can do that too, add a recalibrate in
* the driver as well
*/
if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
LOCK(flags);
if (value)
MACIO_OUT8(KL_GPIO_SOUND_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE |
KEYLARGO_GPIO_OUTOUT_DATA);
else
MACIO_OUT8(KL_GPIO_SOUND_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(KL_GPIO_SOUND_POWER);
UNLOCK(flags);
}
return 0;
}
static long
core99_airport_enable(struct device_node *node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
int state;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
/* Hint: we allow passing of macio itself for the sake of the
* sleep code
*/
if (node != macio->of_node &&
(!node->parent || node->parent != macio->of_node))
return -ENODEV;
state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
if (value == state)
return 0;
if (value) {
/* This code is a reproduction of OF enable-cardslot
* and init-wireless methods, slightly hacked until
* I got it working.
*/
LOCK(flags);
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
UNLOCK(flags);
udelay(10);
MACIO_OUT32(0x1c000, 0);
mdelay(1);
MACIO_OUT8(0x1a3e0, 0x41);
(void)MACIO_IN8(0x1a3e0);
udelay(10);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
UNLOCK(flags);
mdelay(100);
macio->flags |= MACIO_FLAG_AIRPORT_ON;
} else {
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
(void)MACIO_IN8(KL_GPIO_AIRPORT_4);
UNLOCK(flags);
macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
}
return 0;
}
#ifdef CONFIG_SMP
static long
core99_reset_cpu(struct device_node *node, long param, long value)
{
unsigned int reset_io = 0;
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
KL_GPIO_RESET_CPU1,
KL_GPIO_RESET_CPU2,
KL_GPIO_RESET_CPU3 };
macio = &macio_chips[0];
if (macio->type != macio_keylargo)
return -ENODEV;
np = find_path_device("/cpus");
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
u32 *num = (u32 *)get_property(np, "reg", NULL);
u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
reset_io = *rst;
break;
}
}
if (np == NULL || reset_io == 0)
reset_io = dflt_reset_lines[param];
LOCK(flags);
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(reset_io);
udelay(1);
MACIO_OUT8(reset_io, 0);
(void)MACIO_IN8(reset_io);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_SMP */
static long
core99_usb_enable(struct device_node *node, long param, long value)
{
struct macio_chip *macio;
unsigned long flags;
char *prop;
int number;
u32 reg;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
prop = (char *)get_property(node, "AAPL,clock-id", NULL);
if (!prop)
return -ENODEV;
if (strncmp(prop, "usb0u048", 8) == 0)
number = 0;
else if (strncmp(prop, "usb1u148", 8) == 0)
number = 2;
else if (strncmp(prop, "usb2u248", 8) == 0)
number = 4;
else
return -ENODEV;
/* Sorry for the brute-force locking, but this is only used during
* sleep and the timing seem to be critical
*/
LOCK(flags);
if (value) {
/* Turn ON */
if (number == 0) {
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
} else if (number == 2) {
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
} else if (number == 4) {
MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR1);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
}
if (number < 4) {
reg = MACIO_IN32(KEYLARGO_FCR4);
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
MACIO_OUT32(KEYLARGO_FCR4, reg);
(void)MACIO_IN32(KEYLARGO_FCR4);
udelay(10);
} else {
reg = MACIO_IN32(KEYLARGO_FCR3);
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
MACIO_OUT32(KEYLARGO_FCR3, reg);
(void)MACIO_IN32(KEYLARGO_FCR3);
udelay(10);
}
if (macio->type == macio_intrepid) {
/* wait for clock stopped bits to clear */
u32 test0 = 0, test1 = 0;
u32 status0, status1;
int timeout = 1000;
UNLOCK(flags);
switch (number) {
case 0:
test0 = UNI_N_CLOCK_STOPPED_USB0;
test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
break;
case 2:
test0 = UNI_N_CLOCK_STOPPED_USB1;
test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
break;
case 4:
test0 = UNI_N_CLOCK_STOPPED_USB2;
test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
break;
}
do {
if (--timeout <= 0) {
printk(KERN_ERR "core99_usb_enable: "
"Timeout waiting for clocks\n");
break;
}
mdelay(1);
status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
} while ((status0 & test0) | (status1 & test1));
LOCK(flags);
}
} else {
/* Turn OFF */
if (number < 4) {
reg = MACIO_IN32(KEYLARGO_FCR4);
reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
MACIO_OUT32(KEYLARGO_FCR4, reg);
(void)MACIO_IN32(KEYLARGO_FCR4);
udelay(1);
} else {
reg = MACIO_IN32(KEYLARGO_FCR3);
reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
MACIO_OUT32(KEYLARGO_FCR3, reg);
(void)MACIO_IN32(KEYLARGO_FCR3);
udelay(1);
}
if (number == 0) {
if (macio->type != macio_intrepid)
MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
(void)MACIO_IN32(KEYLARGO_FCR0);
udelay(1);
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
} else if (number == 2) {
if (macio->type != macio_intrepid)
MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
(void)MACIO_IN32(KEYLARGO_FCR0);
udelay(1);
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
} else if (number == 4) {
udelay(1);
MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR1);
}
udelay(1);
}
UNLOCK(flags);
return 0;
}
static long
core99_firewire_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
struct macio_chip *macio;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
return -ENODEV;
LOCK(flags);
if (value) {
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
(void)UN_IN(UNI_N_CLOCK_CNTL);
} else {
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
(void)UN_IN(UNI_N_CLOCK_CNTL);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long
core99_firewire_cable_power(struct device_node *node, long param, long value)
{
unsigned long flags;
struct macio_chip *macio;
/* Trick: we allow NULL node */
if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
return -ENODEV;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
udelay(10);
} else {
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long
intrepid_aack_delay_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
if (uninorth_rev < 0xd2)
return -ENODEV;
LOCK(flags);
if (param)
UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
else
UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_POWER4 */
static long
core99_read_gpio(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
return MACIO_IN8(param);
}
static long
core99_write_gpio(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
MACIO_OUT8(param, (u8)(value & 0xff));
return 0;
}
#ifdef CONFIG_POWER4
static long g5_gmac_enable(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
unsigned long flags;
if (node == NULL)
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
mb();
k2_skiplist[0] = NULL;
} else {
k2_skiplist[0] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long g5_fw_enable(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
unsigned long flags;
if (node == NULL)
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
mb();
k2_skiplist[1] = NULL;
} else {
k2_skiplist[1] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long g5_mpic_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
struct device_node *parent = of_get_parent(node);
int is_u3;
if (parent == NULL)
return 0;
is_u3 = strcmp(parent->name, "u3") == 0 ||
strcmp(parent->name, "u4") == 0;
of_node_put(parent);
if (!is_u3)
return 0;
LOCK(flags);
UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
UNLOCK(flags);
return 0;
}
static long g5_eth_phy_reset(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
struct device_node *phy;
int need_reset;
/*
* We must not reset the combo PHYs, only the BCM5221 found in
* the iMac G5.
*/
phy = of_get_next_child(node, NULL);
if (!phy)
return -ENODEV;
need_reset = device_is_compatible(phy, "B5221");
of_node_put(phy);
if (!need_reset)
return 0;
/* PHY reset is GPIO 29, not in device-tree unfortunately */
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
/* Thankfully, this is now always called at a time when we can
* schedule by sungem.
*/
msleep(10);
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
return 0;
}
static long g5_i2s_enable(struct device_node *node, long param, long value)
{
/* Very crude implementation for now */
struct macio_chip *macio = &macio_chips[0];
unsigned long flags;
int cell;
u32 fcrs[3][3] = {
{ 0,
K2_FCR1_I2S0_CELL_ENABLE |
K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
KL3_I2S0_CLK18_ENABLE
},
{ KL0_SCC_A_INTF_ENABLE,
K2_FCR1_I2S1_CELL_ENABLE |
K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
KL3_I2S1_CLK18_ENABLE
},
{ KL0_SCC_B_INTF_ENABLE,
SH_FCR1_I2S2_CELL_ENABLE |
SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
SH_FCR3_I2S2_CLK18_ENABLE
},
};
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
if (strncmp(node->name, "i2s-", 4))
return -ENODEV;
cell = node->name[4] - 'a';
switch(cell) {
case 0:
case 1:
break;
case 2:
if (macio->type == macio_shasta)
break;
default:
return -ENODEV;
}
LOCK(flags);
if (value) {
MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
} else {
MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
}
udelay(10);
UNLOCK(flags);
return 0;
}
#ifdef CONFIG_SMP
static long g5_reset_cpu(struct device_node *node, long param, long value)
{
unsigned int reset_io = 0;
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
macio = &macio_chips[0];
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
np = find_path_device("/cpus");
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
u32 *num = (u32 *)get_property(np, "reg", NULL);
u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
reset_io = *rst;
break;
}
}
if (np == NULL || reset_io == 0)
return -ENODEV;
LOCK(flags);
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(reset_io);
udelay(1);
MACIO_OUT8(reset_io, 0);
(void)MACIO_IN8(reset_io);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_SMP */
/*
* This can be called from pmac_smp so isn't static
*
* This takes the second CPU off the bus on dual CPU machines
* running UP
*/
void g5_phy_disable_cpu1(void)
{
if (uninorth_maj == 3)
UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
#endif /* CONFIG_POWER4 */
#ifndef CONFIG_POWER4
#ifdef CONFIG_PM
static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
if (sleep_mode) {
mdelay(1);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(1);
}
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE |
KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
KL0_IRDA_CLK19_ENABLE);
MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
KL1_UIDE_ENABLE);
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
temp = MACIO_IN32(KEYLARGO_FCR3);
if (macio->rev >= 2) {
temp |= KL3_SHUTDOWN_PLL2X;
if (sleep_mode)
temp |= KL3_SHUTDOWN_PLL_TOTAL;
}
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
KL3_SHUTDOWN_PLLKW35;
if (sleep_mode)
temp |= KL3_SHUTDOWN_PLLKW12;
temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
| KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE |
KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
KL1_UIDE_ENABLE);
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
temp = MACIO_IN32(KEYLARGO_FCR3);
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
KL3_SHUTDOWN_PLLKW35;
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
| KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
{
u32 temp;
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
KL1_EIDE0_ENABLE);
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
temp = MACIO_IN32(KEYLARGO_FCR3);
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(10);
}
static int
core99_sleep(void)
{
struct macio_chip *macio;
int i;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
/* We power off the wireless slot in case it was not done
* by the driver. We don't power it on automatically however
*/
if (macio->flags & MACIO_FLAG_AIRPORT_ON)
core99_airport_enable(macio->of_node, 0, 0);
/* We power off the FW cable. Should be done by the driver... */
if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
core99_firewire_enable(NULL, 0, 0);
core99_firewire_cable_power(NULL, 0, 0);
}
/* We make sure int. modem is off (in case driver lost it) */
if (macio->type == macio_keylargo)
core99_modem_enable(macio->of_node, 0, 0);
else
pangea_modem_enable(macio->of_node, 0, 0);
/* We make sure the sound is off as well */
core99_sound_chip_enable(macio->of_node, 0, 0);
/*
* Save various bits of KeyLargo
*/
/* Save the state of the various GPIOs */
save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
/* Save the FCRs */
if (macio->type == macio_keylargo)
save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
if (macio->type == macio_pangea || macio->type == macio_intrepid)
save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
/* Save state & config of DBDMA channels */
dbdma_save(macio, save_dbdma);
/*
* Turn off as much as we can
*/
if (macio->type == macio_pangea)
pangea_shutdown(macio, 1);
else if (macio->type == macio_intrepid)
intrepid_shutdown(macio, 1);
else if (macio->type == macio_keylargo)
keylargo_shutdown(macio, 1);
/*
* Put the host bridge to sleep
*/
save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
/* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
* enabled !
*/
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
udelay(100);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
mdelay(10);
/*
* FIXME: A bit of black magic with OpenPIC (don't ask me why)
*/
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
MACIO_BIS(0x506e0, 0x00400000);
MACIO_BIS(0x506e0, 0x80000000);
}
return 0;
}
static int
core99_wake_up(void)
{
struct macio_chip *macio;
int i;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
/*
* Wakeup the host bridge
*/
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
udelay(10);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
udelay(10);
/*
* Restore KeyLargo
*/
if (macio->type == macio_keylargo) {
MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
(void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
}
MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
(void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
(void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
(void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
(void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
(void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
if (macio->type == macio_pangea || macio->type == macio_intrepid) {
MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
(void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
}
dbdma_restore(macio, save_dbdma);
MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
/* FIXME more black magic with OpenPIC ... */
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
MACIO_BIC(0x506e0, 0x00400000);
MACIO_BIC(0x506e0, 0x80000000);
}
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
udelay(100);
return 0;
}
#endif /* CONFIG_PM */
static long
core99_sleep_state(struct device_node *node, long param, long value)
{
/* Param == 1 means to enter the "fake sleep" mode that is
* used for CPU speed switch
*/
if (param == 1) {
if (value == 1) {
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
} else {
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
udelay(10);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
udelay(10);
}
return 0;
}
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
#ifdef CONFIG_PM
if (value == 1)
return core99_sleep();
else if (value == 0)
return core99_wake_up();
#endif /* CONFIG_PM */
return 0;
}
#endif /* CONFIG_POWER4 */
static long
generic_dev_can_wake(struct device_node *node, long param, long value)
{
/* Todo: eventually check we are really dealing with on-board
* video device ...
*/
if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
return 0;
}
static long generic_get_mb_info(struct device_node *node, long param, long value)
{
switch(param) {
case PMAC_MB_INFO_MODEL:
return pmac_mb.model_id;
case PMAC_MB_INFO_FLAGS:
return pmac_mb.board_flags;
case PMAC_MB_INFO_NAME:
/* hack hack hack... but should work */
*((const char **)value) = pmac_mb.model_name;
return 0;
}
return -EINVAL;
}
/*
* Table definitions
*/
/* Used on any machine
*/
static struct feature_table_entry any_features[] = {
{ PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
{ PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake },
{ 0, NULL }
};
#ifndef CONFIG_POWER4
/* OHare based motherboards. Currently, we only use these on the
* 2400,3400 and 3500 series powerbooks. Some older desktops seem
* to have issues with turning on/off those asic cells
*/
static struct feature_table_entry ohare_features[] = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
{ PMAC_FTR_IDE_RESET, ohare_ide_reset},
{ PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
{ 0, NULL }
};
/* Heathrow desktop machines (Beige G3).
* Separated as some features couldn't be properly tested
* and the serial port control bits appear to confuse it.
*/
static struct feature_table_entry heathrow_desktop_features[] = {
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ 0, NULL }
};
/* Heathrow based laptop, that is the Wallstreet and mainstreet
* powerbooks.
*/
static struct feature_table_entry heathrow_laptop_features[] = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
{ 0, NULL }
};
/* Paddington based machines
* The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
*/
static struct feature_table_entry paddington_features[] = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
{ 0, NULL }
};
/* Core99 & MacRISC 2 machines (all machines released since the
* iBook (included), that is all AGP machines, except pangea
* chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
* used on iBook2 & iMac "flow power".
*/
static struct feature_table_entry core99_features[] = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
#ifdef CONFIG_PM
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
#endif
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* RackMac
*/
static struct feature_table_entry rackmac_features[] = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* Pangea features
*/
static struct feature_table_entry pangea_features[] = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* Intrepid features
*/
static struct feature_table_entry intrepid_features[] = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable },
{ 0, NULL }
};
#else /* CONFIG_POWER4 */
/* G5 features
*/
static struct feature_table_entry g5_features[] = {
{ PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
{ PMAC_FTR_1394_ENABLE, g5_fw_enable },
{ PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
{ PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, g5_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
#endif /* CONFIG_POWER4 */
static struct pmac_mb_def pmac_mb_defs[] = {
#ifndef CONFIG_POWER4
/*
* Desktops
*/
{ "AAPL,8500", "PowerMac 8500/8600",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,9500", "PowerMac 9500/9600",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7200", "PowerMac 7200",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7300", "PowerMac 7200/7300",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7500", "PowerMac 7500",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,ShinerESB", "Apple Network Server",
PMAC_TYPE_ANS, NULL,
0
},
{ "AAPL,e407", "Alchemy",
PMAC_TYPE_ALCHEMY, NULL,
0
},
{ "AAPL,e411", "Gazelle",
PMAC_TYPE_GAZELLE, NULL,
0
},
{ "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
0
},
{ "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
PMAC_TYPE_SILK, heathrow_desktop_features,
0
},
{ "PowerMac1,1", "Blue&White G3",
PMAC_TYPE_YOSEMITE, paddington_features,
0
},
{ "PowerMac1,2", "PowerMac G4 PCI Graphics",
PMAC_TYPE_YIKES, paddington_features,
0
},
{ "PowerMac2,1", "iMac FireWire",
PMAC_TYPE_FW_IMAC, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac2,2", "iMac FireWire",
PMAC_TYPE_FW_IMAC, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,1", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_OLD_CORE99
},
{ "PowerMac3,2", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,3", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,4", "PowerMac G4 Silver",
PMAC_TYPE_QUICKSILVER, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac3,5", "PowerMac G4 Silver",
PMAC_TYPE_QUICKSILVER, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac3,6", "PowerMac G4 Windtunnel",
PMAC_TYPE_WINDTUNNEL, core99_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac4,1", "iMac \"Flower Power\"",
PMAC_TYPE_PANGEA_IMAC, pangea_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac4,2", "Flat panel iMac",
PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
PMAC_MB_CAN_SLEEP
},
{ "PowerMac4,4", "eMac",
PMAC_TYPE_EMAC, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac5,1", "PowerMac G4 Cube",
PMAC_TYPE_CUBE, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac6,1", "Flat panel iMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac6,3", "Flat panel iMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac6,4", "eMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac10,1", "Mac mini",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "iMac,1", "iMac (first generation)",
PMAC_TYPE_ORIG_IMAC, paddington_features,
0
},
/*
* Xserve's
*/
{ "RackMac1,1", "XServe",
PMAC_TYPE_RACKMAC, rackmac_features,
0,
},
{ "RackMac1,2", "XServe rev. 2",
PMAC_TYPE_RACKMAC, rackmac_features,
0,
},
/*
* Laptops
*/
{ "AAPL,3400/2400", "PowerBook 3400",
PMAC_TYPE_HOOPER, ohare_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "AAPL,3500", "PowerBook 3500",
PMAC_TYPE_KANGA, ohare_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "AAPL,PowerBook1998", "PowerBook Wallstreet",
PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "PowerBook1,1", "PowerBook 101 (Lombard)",
PMAC_TYPE_101_PBOOK, paddington_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "PowerBook2,1", "iBook (first generation)",
PMAC_TYPE_ORIG_IBOOK, core99_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook2,2", "iBook FireWire",
PMAC_TYPE_FW_IBOOK, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook3,1", "PowerBook Pismo",
PMAC_TYPE_PISMO, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook3,2", "PowerBook Titanium",
PMAC_TYPE_TITANIUM, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,3", "PowerBook Titanium II",
PMAC_TYPE_TITANIUM2, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,4", "PowerBook Titanium III",
PMAC_TYPE_TITANIUM3, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,5", "PowerBook Titanium IV",
PMAC_TYPE_TITANIUM4, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,1", "iBook 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,2", "iBook 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,3", "iBook 2 rev. 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook5,1", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,2", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,3", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,4", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,5", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,6", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,7", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,8", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
},
{ "PowerBook5,9", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
},
{ "PowerBook6,1", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,2", "PowerBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,3", "iBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,4", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,5", "iBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,7", "iBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,8", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
#else /* CONFIG_POWER4 */
{ "PowerMac7,2", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
},
#ifdef CONFIG_PPC64
{ "PowerMac7,3", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
},
{ "PowerMac8,1", "iMac G5",
PMAC_TYPE_IMAC_G5, g5_features,
0,
},
{ "PowerMac9,1", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
{ "PowerMac11,2", "PowerMac G5 Dual Core",
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
{ "PowerMac12,1", "iMac G5 (iSight)",
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
{ "RackMac3,1", "XServe G5",
PMAC_TYPE_XSERVE_G5, g5_features,
0,
},
#endif /* CONFIG_PPC64 */
#endif /* CONFIG_POWER4 */
};
/*
* The toplevel feature_call callback
*/
long pmac_do_feature_call(unsigned int selector, ...)
{
struct device_node *node;
long param, value;
int i;
feature_call func = NULL;
va_list args;
if (pmac_mb.features)
for (i=0; pmac_mb.features[i].function; i++)
if (pmac_mb.features[i].selector == selector) {
func = pmac_mb.features[i].function;
break;
}
if (!func)
for (i=0; any_features[i].function; i++)
if (any_features[i].selector == selector) {
func = any_features[i].function;
break;
}
if (!func)
return -ENODEV;
va_start(args, selector);
node = (struct device_node*)va_arg(args, void*);
param = va_arg(args, long);
value = va_arg(args, long);
va_end(args);
return func(node, param, value);
}
static int __init probe_motherboard(void)
{
int i;
struct macio_chip *macio = &macio_chips[0];
const char *model = NULL;
struct device_node *dt;
/* Lookup known motherboard type in device-tree. First try an
* exact match on the "model" property, then try a "compatible"
* match is none is found.
*/
dt = find_devices("device-tree");
if (dt != NULL)
model = (const char *) get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
/* Fallback to selection depending on mac-io chip type */
switch(macio->type) {
#ifndef CONFIG_POWER4
case macio_grand_central:
pmac_mb.model_id = PMAC_TYPE_PSURGE;
pmac_mb.model_name = "Unknown PowerSurge";
break;
case macio_ohare:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
pmac_mb.model_name = "Unknown OHare-based";
break;
case macio_heathrow:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
pmac_mb.model_name = "Unknown Heathrow-based";
pmac_mb.features = heathrow_desktop_features;
break;
case macio_paddington:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
pmac_mb.model_name = "Unknown Paddington-based";
pmac_mb.features = paddington_features;
break;
case macio_keylargo:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
pmac_mb.model_name = "Unknown Keylargo-based";
pmac_mb.features = core99_features;
break;
case macio_pangea:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
pmac_mb.model_name = "Unknown Pangea-based";
pmac_mb.features = pangea_features;
break;
case macio_intrepid:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
pmac_mb.model_name = "Unknown Intrepid-based";
pmac_mb.features = intrepid_features;
break;
#else /* CONFIG_POWER4 */
case macio_keylargo2:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
pmac_mb.model_name = "Unknown K2-based";
pmac_mb.features = g5_features;
break;
case macio_shasta:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
pmac_mb.model_name = "Unknown Shasta-based";
pmac_mb.features = g5_features;
break;
#endif /* CONFIG_POWER4 */
default:
return -ENODEV;
}
found:
#ifndef CONFIG_POWER4
/* Fixup Hooper vs. Comet */
if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
if (!mach_id_ptr)
return -ENODEV;
/* Here, I used to disable the media-bay on comet. It
* appears this is wrong, the floppy connector is actually
* a kind of media-bay and works with the current driver.
*/
if (__raw_readl(mach_id_ptr) & 0x20000000UL)
pmac_mb.model_id = PMAC_TYPE_COMET;
iounmap(mach_id_ptr);
}
/* Set default value of powersave_nap on machines that support it.
* It appears that uninorth rev 3 has a problem with it, we don't
* enable it on those. In theory, the flush-on-lock property is
* supposed to be set when not supported, but I'm not very confident
* that all Apple OF revs did it properly, I do it the paranoid way.
*/
while (uninorth_base && uninorth_rev > 3) {
struct device_node *np = find_path_device("/cpus");
if (!np || !np->child) {
printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
break;
}
np = np->child;
/* Nap mode not supported on SMP */
if (np->sibling)
break;
/* Nap mode not supported if flush-on-lock property is present */
if (get_property(np, "flush-on-lock", NULL))
break;
powersave_nap = 1;
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
break;
}
/* On CPUs that support it (750FX), lowspeed by default during
* NAP mode
*/
powersave_lowspeed = 1;
#else /* CONFIG_POWER4 */
powersave_nap = 1;
#endif /* CONFIG_POWER4 */
/* Check for "mobile" machine */
if (model && (strncmp(model, "PowerBook", 9) == 0
|| strncmp(model, "iBook", 5) == 0))
pmac_mb.board_flags |= PMAC_MB_MOBILE;
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
return 0;
}
/* Initialize the Core99 UniNorth host bridge and memory controller
*/
static void __init probe_uninorth(void)
{
u32 *addrp;
phys_addr_t address;
unsigned long actrl;
/* Locate core99 Uni-N */
uninorth_node = of_find_node_by_name(NULL, "uni-n");
/* Locate G5 u3 */
if (uninorth_node == NULL) {
uninorth_node = of_find_node_by_name(NULL, "u3");
uninorth_maj = 3;
}
/* Locate G5 u4 */
if (uninorth_node == NULL) {
uninorth_node = of_find_node_by_name(NULL, "u4");
uninorth_maj = 4;
}
if (uninorth_node == NULL)
return;
addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
if (addrp == NULL)
return;
address = of_translate_address(uninorth_node, addrp);
if (address == 0)
return;
uninorth_base = ioremap(address, 0x40000);
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
if (uninorth_maj == 3 || uninorth_maj == 4)
u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
printk(KERN_INFO "Found %s memory controller & host bridge"
" @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
uninorth_maj == 4 ? "U4" : "UniNorth",
(unsigned int)address, uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
*/
if (uninorth_rev < 0x11) {
actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
UNI_N_ARB_CTRL_QACK_DELAY) <<
UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
UN_OUT(UNI_N_ARB_CTRL, actrl);
}
/* Some more magic as done by them in recent MacOS X on UniNorth
* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
* memory timeout
*/
if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
uninorth_rev == 0xc0)
UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
}
static void __init probe_one_macio(const char *name, const char *compat, int type)
{
struct device_node* node;
int i;
volatile u32 __iomem *base;
u32 *addrp, *revp;
phys_addr_t addr;
u64 size;
for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
if (!compat)
break;
if (device_is_compatible(node, compat))
break;
}
if (!node)
return;
for(i=0; i<MAX_MACIO_CHIPS; i++) {
if (!macio_chips[i].of_node)
break;
if (macio_chips[i].of_node == node)
return;
}
if (i >= MAX_MACIO_CHIPS) {
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
return;
}
addrp = of_get_pci_address(node, 0, &size, NULL);
if (addrp == NULL) {
printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
node->full_name);
return;
}
addr = of_translate_address(node, addrp);
if (addr == 0) {
printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
node->full_name);
return;
}
base = ioremap(addr, (unsigned long)size);
if (!base) {
printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
node->full_name);
return;
}
if (type == macio_keylargo || type == macio_keylargo2) {
u32 *did = (u32 *)get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
type = macio_intrepid;
if (*did == 0x0000004f)
type = macio_shasta;
}
macio_chips[i].of_node = node;
macio_chips[i].type = type;
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
revp = (u32 *)get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
macio_names[type], macio_chips[i].rev, macio_chips[i].base);
}
static int __init
probe_macios(void)
{
/* Warning, ordering is important */
probe_one_macio("gc", NULL, macio_grand_central);
probe_one_macio("ohare", NULL, macio_ohare);
probe_one_macio("pci106b,7", NULL, macio_ohareII);
probe_one_macio("mac-io", "keylargo", macio_keylargo);
probe_one_macio("mac-io", "paddington", macio_paddington);
probe_one_macio("mac-io", "gatwick", macio_gatwick);
probe_one_macio("mac-io", "heathrow", macio_heathrow);
probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
/* Make sure the "main" macio chip appear first */
if (macio_chips[0].type == macio_gatwick
&& macio_chips[1].type == macio_heathrow) {
struct macio_chip temp = macio_chips[0];
macio_chips[0] = macio_chips[1];
macio_chips[1] = temp;
}
if (macio_chips[0].type == macio_ohareII
&& macio_chips[1].type == macio_ohare) {
struct macio_chip temp = macio_chips[0];
macio_chips[0] = macio_chips[1];
macio_chips[1] = temp;
}
macio_chips[0].lbus.index = 0;
macio_chips[1].lbus.index = 1;
return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
}
static void __init
initial_serial_shutdown(struct device_node *np)
{
int len;
struct slot_names_prop {
int count;
char name[1];
} *slots;
char *conn;
int port_type = PMAC_SCC_ASYNC;
int modem = 0;
slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
conn = get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
else if (device_is_compatible(np, "cobalt"))
modem = 1;
else if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
port_type = PMAC_SCC_IRDA;
else if (strcmp(slots->name, "Modem") == 0)
modem = 1;
}
if (modem)
pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
}
static void __init
set_initial_features(void)
{
struct device_node *np;
/* That hack appears to be necessary for some StarMax motherboards
* but I'm not too sure it was audited for side-effects on other
* ohare based machines...
* Since I still have difficulties figuring the right way to
* differenciate them all and since that hack was there for a long
* time, I'll keep it around
*/
if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
struct macio_chip *macio = &macio_chips[0];
MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
} else if (macio_chips[0].type == macio_ohare) {
struct macio_chip *macio = &macio_chips[0];
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
} else if (macio_chips[1].type == macio_ohare) {
struct macio_chip *macio = &macio_chips[1];
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
}
#ifdef CONFIG_POWER4
if (macio_chips[0].type == macio_keylargo2 ||
macio_chips[0].type == macio_shasta) {
#ifndef CONFIG_SMP
/* On SMP machines running UP, we have the second CPU eating
* bus cycles. We need to take it off the bus. This is done
* from pmac_smp for SMP kernels running on one CPU
*/
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL)
np = of_find_node_by_type(np, "cpu");
if (np != NULL) {
g5_phy_disable_cpu1();
of_node_put(np);
}
#endif /* CONFIG_SMP */
/* Enable GMAC for now for PCI probing. It will be disabled
* later on after PCI probe
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
/* Enable FW before PCI probe. Will be disabled later on
* Note: We should have a batter way to check that we are
* dealing with uninorth internal cell and not a PCI cell
* on the external PCI. The code below works though.
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
np = of_find_node_by_name(np, "firewire");
}
}
#else /* CONFIG_POWER4 */
if (macio_chips[0].type == macio_keylargo ||
macio_chips[0].type == macio_pangea ||
macio_chips[0].type == macio_intrepid) {
/* Enable GMAC for now for PCI probing. It will be disabled
* later on after PCI probe
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "gmac"))
core99_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
/* Enable FW before PCI probe. Will be disabled later on
* Note: We should have a batter way to check that we are
* dealing with uninorth internal cell and not a PCI cell
* on the external PCI. The code below works though.
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& (device_is_compatible(np, "pci106b,18") ||
device_is_compatible(np, "pci106b,30") ||
device_is_compatible(np, "pci11c1,5811"))) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
core99_firewire_enable(np, 0, 1);
}
np = of_find_node_by_name(np, "firewire");
}
/* Enable ATA-100 before PCI probe. */
np = of_find_node_by_name(NULL, "ata-6");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "kauai-ata")) {
core99_ata100_enable(np, 1);
}
np = of_find_node_by_name(np, "ata-6");
}
/* Switch airport off */
np = find_devices("radio");
while(np) {
if (np && np->parent == macio_chips[0].of_node) {
macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
core99_airport_enable(np, 0, 0);
}
np = np->next;
}
}
/* On all machines that support sound PM, switch sound off */
if (macio_chips[0].of_node)
pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
macio_chips[0].of_node, 0, 0);
/* While on some desktop G3s, we turn it back on */
if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
&& (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
pmac_mb.model_id == PMAC_TYPE_SILK)) {
struct macio_chip *macio = &macio_chips[0];
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
}
#endif /* CONFIG_POWER4 */
/* On all machines, switch modem & serial ports off */
np = find_devices("ch-a");
while(np) {
initial_serial_shutdown(np);
np = np->next;
}
np = find_devices("ch-b");
while(np) {
initial_serial_shutdown(np);
np = np->next;
}
}
void __init
pmac_feature_init(void)
{
/* Detect the UniNorth memory controller */
probe_uninorth();
/* Probe mac-io controllers */
if (probe_macios()) {
printk(KERN_WARNING "No mac-io chip found\n");
return;
}
/* Probe machine type */
if (probe_motherboard())
printk(KERN_WARNING "Unknown PowerMac !\n");
/* Set some initial features (turn off some chips that will
* be later turned on)
*/
set_initial_features();
}
#if 0
static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
{
int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
int bits[8] = { 8,16,0,32,2,4,0,0 };
int freq = (frq >> 8) & 0xf;
if (freqs[freq] == 0)
printk("%s: Unknown HT link frequency %x\n", name, freq);
else
printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
name, freqs[freq],
bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
}
void __init pmac_check_ht_link(void)
{
u32 ufreq, freq, ucfg, cfg;
struct device_node *pcix_node;
u8 px_bus, px_devfn;
struct pci_controller *px_hose;
(void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
dump_HT_speeds("U3 HyperTransport", cfg, freq);
pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
if (pcix_node == NULL) {
printk("No PCI-X bridge found\n");
return;
}
if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
printk("PCI-X bridge found but not matched to pci\n");
return;
}
px_hose = pci_find_hose_for_OF_device(pcix_node);
if (px_hose == NULL) {
printk("PCI-X bridge found but not matched to host\n");
return;
}
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
}
#endif /* 0 */
/*
* Early video resume hook
*/
static void (*pmac_early_vresume_proc)(void *data);
static void *pmac_early_vresume_data;
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
if (!machine_is(powermac))
return;
preempt_disable();
pmac_early_vresume_proc = proc;
pmac_early_vresume_data = data;
preempt_enable();
}
EXPORT_SYMBOL(pmac_set_early_video_resume);
void pmac_call_early_video_resume(void)
{
if (pmac_early_vresume_proc)
pmac_early_vresume_proc(pmac_early_vresume_data);
}
/*
* AGP related suspend/resume code
*/
static struct pci_dev *pmac_agp_bridge;
static int (*pmac_agp_suspend)(struct pci_dev *bridge);
static int (*pmac_agp_resume)(struct pci_dev *bridge);
void pmac_register_agp_pm(struct pci_dev *bridge,
int (*suspend)(struct pci_dev *bridge),
int (*resume)(struct pci_dev *bridge))
{
if (suspend || resume) {
pmac_agp_bridge = bridge;
pmac_agp_suspend = suspend;
pmac_agp_resume = resume;
return;
}
if (bridge != pmac_agp_bridge)
return;
pmac_agp_suspend = pmac_agp_resume = NULL;
return;
}
EXPORT_SYMBOL(pmac_register_agp_pm);
void pmac_suspend_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_suspend(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_suspend_agp_for_card);
void pmac_resume_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_resume(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_resume_agp_for_card);