| menuconfig NVMEM |
| tristate "NVMEM Support" |
| select REGMAP |
| help |
| Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... |
| |
| This framework is designed to provide a generic interface to NVMEM |
| from both the Linux Kernel and the userspace. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem_core. |
| |
| If unsure, say no. |
| |
| if NVMEM |
| |
| config NVMEM_IMX_OCOTP |
| tristate "i.MX6 On-Chip OTP Controller support" |
| depends on SOC_IMX6 |
| help |
| This is a driver for the On-Chip OTP Controller (OCOTP) available on |
| i.MX6 SoCs, providing access to 4 Kbits of one-time programmable |
| eFuses. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem-imx-ocotp. |
| |
| config NVMEM_LPC18XX_EEPROM |
| tristate "NXP LPC18XX EEPROM Memory Support" |
| depends on ARCH_LPC18XX || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| Say Y here to include support for NXP LPC18xx EEPROM memory found in |
| NXP LPC185x/3x and LPC435x/3x/2x/1x devices. |
| To compile this driver as a module, choose M here: the module |
| will be called nvmem_lpc18xx_eeprom. |
| |
| config NVMEM_MXS_OCOTP |
| tristate "Freescale MXS On-Chip OTP Memory Support" |
| depends on ARCH_MXS || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| If you say Y here, you will get readonly access to the |
| One Time Programmable memory pages that are stored |
| on the Freescale i.MX23/i.MX28 processor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem-mxs-ocotp. |
| |
| config MTK_EFUSE |
| tristate "Mediatek SoCs EFUSE support" |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| depends on HAS_IOMEM |
| select REGMAP_MMIO |
| help |
| This is a driver to access hardware related data like sensor |
| calibration, HDMI impedance etc. |
| |
| This driver can also be built as a module. If so, the module |
| will be called efuse-mtk. |
| |
| config QCOM_QFPROM |
| tristate "QCOM QFPROM Support" |
| depends on ARCH_QCOM || COMPILE_TEST |
| depends on HAS_IOMEM |
| select REGMAP_MMIO |
| help |
| Say y here to enable QFPROM support. The QFPROM provides access |
| functions for QFPROM data to rest of the drivers via nvmem interface. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem_qfprom. |
| |
| config ROCKCHIP_EFUSE |
| tristate "Rockchip eFuse Support" |
| depends on ARCH_ROCKCHIP || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| This is a simple drive to dump specified values of Rockchip SoC |
| from eFuse, such as cpu-leakage. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem_rockchip_efuse. |
| |
| config NVMEM_SUNXI_SID |
| tristate "Allwinner SoCs SID support" |
| depends on ARCH_SUNXI |
| select REGMAP_MMIO |
| help |
| This is a driver for the 'security ID' available on various Allwinner |
| devices. |
| |
| This driver can also be built as a module. If so, the module |
| will be called nvmem_sunxi_sid. |
| |
| config NVMEM_VF610_OCOTP |
| tristate "VF610 SoC OCOTP support" |
| depends on SOC_VF610 || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| This is a driver for the 'OCOTP' peripheral available on Vybrid |
| devices like VF5xx and VF6xx. |
| |
| This driver can also be build as a module. If so, the module will |
| be called nvmem-vf610-ocotp. |
| |
| endif |