| /* |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. |
| * Copyright (c) 2013 Red Hat, Inc. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_bit.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_mount.h" |
| #include "xfs_da_format.h" |
| #include "xfs_da_btree.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_dinode.h" |
| #include "xfs_inode.h" |
| #include "xfs_dir2.h" |
| #include "xfs_dir2_priv.h" |
| #include "xfs_error.h" |
| #include "xfs_trace.h" |
| #include "xfs_bmap.h" |
| #include "xfs_trans.h" |
| |
| /* |
| * Directory file type support functions |
| */ |
| static unsigned char xfs_dir3_filetype_table[] = { |
| DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, |
| DT_FIFO, DT_SOCK, DT_LNK, DT_WHT, |
| }; |
| |
| unsigned char |
| xfs_dir3_get_dtype( |
| struct xfs_mount *mp, |
| __uint8_t filetype) |
| { |
| if (!xfs_sb_version_hasftype(&mp->m_sb)) |
| return DT_UNKNOWN; |
| |
| if (filetype >= XFS_DIR3_FT_MAX) |
| return DT_UNKNOWN; |
| |
| return xfs_dir3_filetype_table[filetype]; |
| } |
| /* |
| * @mode, if set, indicates that the type field needs to be set up. |
| * This uses the transformation from file mode to DT_* as defined in linux/fs.h |
| * for file type specification. This will be propagated into the directory |
| * structure if appropriate for the given operation and filesystem config. |
| */ |
| const unsigned char xfs_mode_to_ftype[S_IFMT >> S_SHIFT] = { |
| [0] = XFS_DIR3_FT_UNKNOWN, |
| [S_IFREG >> S_SHIFT] = XFS_DIR3_FT_REG_FILE, |
| [S_IFDIR >> S_SHIFT] = XFS_DIR3_FT_DIR, |
| [S_IFCHR >> S_SHIFT] = XFS_DIR3_FT_CHRDEV, |
| [S_IFBLK >> S_SHIFT] = XFS_DIR3_FT_BLKDEV, |
| [S_IFIFO >> S_SHIFT] = XFS_DIR3_FT_FIFO, |
| [S_IFSOCK >> S_SHIFT] = XFS_DIR3_FT_SOCK, |
| [S_IFLNK >> S_SHIFT] = XFS_DIR3_FT_SYMLINK, |
| }; |
| |
| STATIC int |
| xfs_dir2_sf_getdents( |
| xfs_inode_t *dp, /* incore directory inode */ |
| struct dir_context *ctx) |
| { |
| int i; /* shortform entry number */ |
| xfs_mount_t *mp; /* filesystem mount point */ |
| xfs_dir2_dataptr_t off; /* current entry's offset */ |
| xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ |
| xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ |
| xfs_dir2_dataptr_t dot_offset; |
| xfs_dir2_dataptr_t dotdot_offset; |
| xfs_ino_t ino; |
| |
| mp = dp->i_mount; |
| |
| ASSERT(dp->i_df.if_flags & XFS_IFINLINE); |
| /* |
| * Give up if the directory is way too short. |
| */ |
| if (dp->i_d.di_size < offsetof(xfs_dir2_sf_hdr_t, parent)) { |
| ASSERT(XFS_FORCED_SHUTDOWN(mp)); |
| return XFS_ERROR(EIO); |
| } |
| |
| ASSERT(dp->i_df.if_bytes == dp->i_d.di_size); |
| ASSERT(dp->i_df.if_u1.if_data != NULL); |
| |
| sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; |
| |
| ASSERT(dp->i_d.di_size >= xfs_dir2_sf_hdr_size(sfp->i8count)); |
| |
| /* |
| * If the block number in the offset is out of range, we're done. |
| */ |
| if (xfs_dir2_dataptr_to_db(mp, ctx->pos) > mp->m_dirdatablk) |
| return 0; |
| |
| /* |
| * Precalculate offsets for . and .. as we will always need them. |
| * |
| * XXX(hch): the second argument is sometimes 0 and sometimes |
| * mp->m_dirdatablk. |
| */ |
| dot_offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, |
| xfs_dir3_data_dot_offset(mp)); |
| dotdot_offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, |
| xfs_dir3_data_dotdot_offset(mp)); |
| |
| /* |
| * Put . entry unless we're starting past it. |
| */ |
| if (ctx->pos <= dot_offset) { |
| ctx->pos = dot_offset & 0x7fffffff; |
| if (!dir_emit(ctx, ".", 1, dp->i_ino, DT_DIR)) |
| return 0; |
| } |
| |
| /* |
| * Put .. entry unless we're starting past it. |
| */ |
| if (ctx->pos <= dotdot_offset) { |
| ino = xfs_dir2_sf_get_parent_ino(sfp); |
| ctx->pos = dotdot_offset & 0x7fffffff; |
| if (!dir_emit(ctx, "..", 2, ino, DT_DIR)) |
| return 0; |
| } |
| |
| /* |
| * Loop while there are more entries and put'ing works. |
| */ |
| sfep = xfs_dir2_sf_firstentry(sfp); |
| for (i = 0; i < sfp->count; i++) { |
| __uint8_t filetype; |
| |
| off = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, |
| xfs_dir2_sf_get_offset(sfep)); |
| |
| if (ctx->pos > off) { |
| sfep = xfs_dir3_sf_nextentry(mp, sfp, sfep); |
| continue; |
| } |
| |
| ino = xfs_dir3_sfe_get_ino(mp, sfp, sfep); |
| filetype = xfs_dir3_sfe_get_ftype(mp, sfp, sfep); |
| ctx->pos = off & 0x7fffffff; |
| if (!dir_emit(ctx, (char *)sfep->name, sfep->namelen, ino, |
| xfs_dir3_get_dtype(mp, filetype))) |
| return 0; |
| sfep = xfs_dir3_sf_nextentry(mp, sfp, sfep); |
| } |
| |
| ctx->pos = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) & |
| 0x7fffffff; |
| return 0; |
| } |
| |
| /* |
| * Readdir for block directories. |
| */ |
| STATIC int |
| xfs_dir2_block_getdents( |
| xfs_inode_t *dp, /* incore inode */ |
| struct dir_context *ctx) |
| { |
| xfs_dir2_data_hdr_t *hdr; /* block header */ |
| struct xfs_buf *bp; /* buffer for block */ |
| xfs_dir2_block_tail_t *btp; /* block tail */ |
| xfs_dir2_data_entry_t *dep; /* block data entry */ |
| xfs_dir2_data_unused_t *dup; /* block unused entry */ |
| char *endptr; /* end of the data entries */ |
| int error; /* error return value */ |
| xfs_mount_t *mp; /* filesystem mount point */ |
| char *ptr; /* current data entry */ |
| int wantoff; /* starting block offset */ |
| xfs_off_t cook; |
| |
| mp = dp->i_mount; |
| /* |
| * If the block number in the offset is out of range, we're done. |
| */ |
| if (xfs_dir2_dataptr_to_db(mp, ctx->pos) > mp->m_dirdatablk) |
| return 0; |
| |
| error = xfs_dir3_block_read(NULL, dp, &bp); |
| if (error) |
| return error; |
| |
| /* |
| * Extract the byte offset we start at from the seek pointer. |
| * We'll skip entries before this. |
| */ |
| wantoff = xfs_dir2_dataptr_to_off(mp, ctx->pos); |
| hdr = bp->b_addr; |
| xfs_dir3_data_check(dp, bp); |
| /* |
| * Set up values for the loop. |
| */ |
| btp = xfs_dir2_block_tail_p(mp, hdr); |
| ptr = (char *)xfs_dir3_data_entry_p(hdr); |
| endptr = (char *)xfs_dir2_block_leaf_p(btp); |
| |
| /* |
| * Loop over the data portion of the block. |
| * Each object is a real entry (dep) or an unused one (dup). |
| */ |
| while (ptr < endptr) { |
| __uint8_t filetype; |
| |
| dup = (xfs_dir2_data_unused_t *)ptr; |
| /* |
| * Unused, skip it. |
| */ |
| if (be16_to_cpu(dup->freetag) == XFS_DIR2_DATA_FREE_TAG) { |
| ptr += be16_to_cpu(dup->length); |
| continue; |
| } |
| |
| dep = (xfs_dir2_data_entry_t *)ptr; |
| |
| /* |
| * Bump pointer for the next iteration. |
| */ |
| ptr += xfs_dir3_data_entsize(mp, dep->namelen); |
| /* |
| * The entry is before the desired starting point, skip it. |
| */ |
| if ((char *)dep - (char *)hdr < wantoff) |
| continue; |
| |
| cook = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, |
| (char *)dep - (char *)hdr); |
| |
| ctx->pos = cook & 0x7fffffff; |
| filetype = xfs_dir3_dirent_get_ftype(mp, dep); |
| /* |
| * If it didn't fit, set the final offset to here & return. |
| */ |
| if (!dir_emit(ctx, (char *)dep->name, dep->namelen, |
| be64_to_cpu(dep->inumber), |
| xfs_dir3_get_dtype(mp, filetype))) { |
| xfs_trans_brelse(NULL, bp); |
| return 0; |
| } |
| } |
| |
| /* |
| * Reached the end of the block. |
| * Set the offset to a non-existent block 1 and return. |
| */ |
| ctx->pos = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) & |
| 0x7fffffff; |
| xfs_trans_brelse(NULL, bp); |
| return 0; |
| } |
| |
| struct xfs_dir2_leaf_map_info { |
| xfs_extlen_t map_blocks; /* number of fsbs in map */ |
| xfs_dablk_t map_off; /* last mapped file offset */ |
| int map_size; /* total entries in *map */ |
| int map_valid; /* valid entries in *map */ |
| int nmap; /* mappings to ask xfs_bmapi */ |
| xfs_dir2_db_t curdb; /* db for current block */ |
| int ra_current; /* number of read-ahead blks */ |
| int ra_index; /* *map index for read-ahead */ |
| int ra_offset; /* map entry offset for ra */ |
| int ra_want; /* readahead count wanted */ |
| struct xfs_bmbt_irec map[]; /* map vector for blocks */ |
| }; |
| |
| STATIC int |
| xfs_dir2_leaf_readbuf( |
| struct xfs_inode *dp, |
| size_t bufsize, |
| struct xfs_dir2_leaf_map_info *mip, |
| xfs_dir2_off_t *curoff, |
| struct xfs_buf **bpp) |
| { |
| struct xfs_mount *mp = dp->i_mount; |
| struct xfs_buf *bp = *bpp; |
| struct xfs_bmbt_irec *map = mip->map; |
| struct blk_plug plug; |
| int error = 0; |
| int length; |
| int i; |
| int j; |
| |
| /* |
| * If we have a buffer, we need to release it and |
| * take it out of the mapping. |
| */ |
| |
| if (bp) { |
| xfs_trans_brelse(NULL, bp); |
| bp = NULL; |
| mip->map_blocks -= mp->m_dirblkfsbs; |
| /* |
| * Loop to get rid of the extents for the |
| * directory block. |
| */ |
| for (i = mp->m_dirblkfsbs; i > 0; ) { |
| j = min_t(int, map->br_blockcount, i); |
| map->br_blockcount -= j; |
| map->br_startblock += j; |
| map->br_startoff += j; |
| /* |
| * If mapping is done, pitch it from |
| * the table. |
| */ |
| if (!map->br_blockcount && --mip->map_valid) |
| memmove(&map[0], &map[1], |
| sizeof(map[0]) * mip->map_valid); |
| i -= j; |
| } |
| } |
| |
| /* |
| * Recalculate the readahead blocks wanted. |
| */ |
| mip->ra_want = howmany(bufsize + mp->m_dirblksize, |
| mp->m_sb.sb_blocksize) - 1; |
| ASSERT(mip->ra_want >= 0); |
| |
| /* |
| * If we don't have as many as we want, and we haven't |
| * run out of data blocks, get some more mappings. |
| */ |
| if (1 + mip->ra_want > mip->map_blocks && |
| mip->map_off < xfs_dir2_byte_to_da(mp, XFS_DIR2_LEAF_OFFSET)) { |
| /* |
| * Get more bmaps, fill in after the ones |
| * we already have in the table. |
| */ |
| mip->nmap = mip->map_size - mip->map_valid; |
| error = xfs_bmapi_read(dp, mip->map_off, |
| xfs_dir2_byte_to_da(mp, XFS_DIR2_LEAF_OFFSET) - |
| mip->map_off, |
| &map[mip->map_valid], &mip->nmap, 0); |
| |
| /* |
| * Don't know if we should ignore this or try to return an |
| * error. The trouble with returning errors is that readdir |
| * will just stop without actually passing the error through. |
| */ |
| if (error) |
| goto out; /* XXX */ |
| |
| /* |
| * If we got all the mappings we asked for, set the final map |
| * offset based on the last bmap value received. Otherwise, |
| * we've reached the end. |
| */ |
| if (mip->nmap == mip->map_size - mip->map_valid) { |
| i = mip->map_valid + mip->nmap - 1; |
| mip->map_off = map[i].br_startoff + map[i].br_blockcount; |
| } else |
| mip->map_off = xfs_dir2_byte_to_da(mp, |
| XFS_DIR2_LEAF_OFFSET); |
| |
| /* |
| * Look for holes in the mapping, and eliminate them. Count up |
| * the valid blocks. |
| */ |
| for (i = mip->map_valid; i < mip->map_valid + mip->nmap; ) { |
| if (map[i].br_startblock == HOLESTARTBLOCK) { |
| mip->nmap--; |
| length = mip->map_valid + mip->nmap - i; |
| if (length) |
| memmove(&map[i], &map[i + 1], |
| sizeof(map[i]) * length); |
| } else { |
| mip->map_blocks += map[i].br_blockcount; |
| i++; |
| } |
| } |
| mip->map_valid += mip->nmap; |
| } |
| |
| /* |
| * No valid mappings, so no more data blocks. |
| */ |
| if (!mip->map_valid) { |
| *curoff = xfs_dir2_da_to_byte(mp, mip->map_off); |
| goto out; |
| } |
| |
| /* |
| * Read the directory block starting at the first mapping. |
| */ |
| mip->curdb = xfs_dir2_da_to_db(mp, map->br_startoff); |
| error = xfs_dir3_data_read(NULL, dp, map->br_startoff, |
| map->br_blockcount >= mp->m_dirblkfsbs ? |
| XFS_FSB_TO_DADDR(mp, map->br_startblock) : -1, &bp); |
| |
| /* |
| * Should just skip over the data block instead of giving up. |
| */ |
| if (error) |
| goto out; /* XXX */ |
| |
| /* |
| * Adjust the current amount of read-ahead: we just read a block that |
| * was previously ra. |
| */ |
| if (mip->ra_current) |
| mip->ra_current -= mp->m_dirblkfsbs; |
| |
| /* |
| * Do we need more readahead? |
| */ |
| blk_start_plug(&plug); |
| for (mip->ra_index = mip->ra_offset = i = 0; |
| mip->ra_want > mip->ra_current && i < mip->map_blocks; |
| i += mp->m_dirblkfsbs) { |
| ASSERT(mip->ra_index < mip->map_valid); |
| /* |
| * Read-ahead a contiguous directory block. |
| */ |
| if (i > mip->ra_current && |
| map[mip->ra_index].br_blockcount >= mp->m_dirblkfsbs) { |
| xfs_dir3_data_readahead(NULL, dp, |
| map[mip->ra_index].br_startoff + mip->ra_offset, |
| XFS_FSB_TO_DADDR(mp, |
| map[mip->ra_index].br_startblock + |
| mip->ra_offset)); |
| mip->ra_current = i; |
| } |
| |
| /* |
| * Read-ahead a non-contiguous directory block. This doesn't |
| * use our mapping, but this is a very rare case. |
| */ |
| else if (i > mip->ra_current) { |
| xfs_dir3_data_readahead(NULL, dp, |
| map[mip->ra_index].br_startoff + |
| mip->ra_offset, -1); |
| mip->ra_current = i; |
| } |
| |
| /* |
| * Advance offset through the mapping table. |
| */ |
| for (j = 0; j < mp->m_dirblkfsbs; j++) { |
| /* |
| * The rest of this extent but not more than a dir |
| * block. |
| */ |
| length = min_t(int, mp->m_dirblkfsbs, |
| map[mip->ra_index].br_blockcount - |
| mip->ra_offset); |
| j += length; |
| mip->ra_offset += length; |
| |
| /* |
| * Advance to the next mapping if this one is used up. |
| */ |
| if (mip->ra_offset == map[mip->ra_index].br_blockcount) { |
| mip->ra_offset = 0; |
| mip->ra_index++; |
| } |
| } |
| } |
| blk_finish_plug(&plug); |
| |
| out: |
| *bpp = bp; |
| return error; |
| } |
| |
| /* |
| * Getdents (readdir) for leaf and node directories. |
| * This reads the data blocks only, so is the same for both forms. |
| */ |
| STATIC int |
| xfs_dir2_leaf_getdents( |
| xfs_inode_t *dp, /* incore directory inode */ |
| struct dir_context *ctx, |
| size_t bufsize) |
| { |
| struct xfs_buf *bp = NULL; /* data block buffer */ |
| xfs_dir2_data_hdr_t *hdr; /* data block header */ |
| xfs_dir2_data_entry_t *dep; /* data entry */ |
| xfs_dir2_data_unused_t *dup; /* unused entry */ |
| int error = 0; /* error return value */ |
| int length; /* temporary length value */ |
| xfs_mount_t *mp; /* filesystem mount point */ |
| int byteoff; /* offset in current block */ |
| xfs_dir2_off_t curoff; /* current overall offset */ |
| xfs_dir2_off_t newoff; /* new curoff after new blk */ |
| char *ptr = NULL; /* pointer to current data */ |
| struct xfs_dir2_leaf_map_info *map_info; |
| |
| /* |
| * If the offset is at or past the largest allowed value, |
| * give up right away. |
| */ |
| if (ctx->pos >= XFS_DIR2_MAX_DATAPTR) |
| return 0; |
| |
| mp = dp->i_mount; |
| |
| /* |
| * Set up to bmap a number of blocks based on the caller's |
| * buffer size, the directory block size, and the filesystem |
| * block size. |
| */ |
| length = howmany(bufsize + mp->m_dirblksize, |
| mp->m_sb.sb_blocksize); |
| map_info = kmem_zalloc(offsetof(struct xfs_dir2_leaf_map_info, map) + |
| (length * sizeof(struct xfs_bmbt_irec)), |
| KM_SLEEP | KM_NOFS); |
| map_info->map_size = length; |
| |
| /* |
| * Inside the loop we keep the main offset value as a byte offset |
| * in the directory file. |
| */ |
| curoff = xfs_dir2_dataptr_to_byte(mp, ctx->pos); |
| |
| /* |
| * Force this conversion through db so we truncate the offset |
| * down to get the start of the data block. |
| */ |
| map_info->map_off = xfs_dir2_db_to_da(mp, |
| xfs_dir2_byte_to_db(mp, curoff)); |
| |
| /* |
| * Loop over directory entries until we reach the end offset. |
| * Get more blocks and readahead as necessary. |
| */ |
| while (curoff < XFS_DIR2_LEAF_OFFSET) { |
| __uint8_t filetype; |
| |
| /* |
| * If we have no buffer, or we're off the end of the |
| * current buffer, need to get another one. |
| */ |
| if (!bp || ptr >= (char *)bp->b_addr + mp->m_dirblksize) { |
| |
| error = xfs_dir2_leaf_readbuf(dp, bufsize, map_info, |
| &curoff, &bp); |
| if (error || !map_info->map_valid) |
| break; |
| |
| /* |
| * Having done a read, we need to set a new offset. |
| */ |
| newoff = xfs_dir2_db_off_to_byte(mp, map_info->curdb, 0); |
| /* |
| * Start of the current block. |
| */ |
| if (curoff < newoff) |
| curoff = newoff; |
| /* |
| * Make sure we're in the right block. |
| */ |
| else if (curoff > newoff) |
| ASSERT(xfs_dir2_byte_to_db(mp, curoff) == |
| map_info->curdb); |
| hdr = bp->b_addr; |
| xfs_dir3_data_check(dp, bp); |
| /* |
| * Find our position in the block. |
| */ |
| ptr = (char *)xfs_dir3_data_entry_p(hdr); |
| byteoff = xfs_dir2_byte_to_off(mp, curoff); |
| /* |
| * Skip past the header. |
| */ |
| if (byteoff == 0) |
| curoff += xfs_dir3_data_entry_offset(hdr); |
| /* |
| * Skip past entries until we reach our offset. |
| */ |
| else { |
| while ((char *)ptr - (char *)hdr < byteoff) { |
| dup = (xfs_dir2_data_unused_t *)ptr; |
| |
| if (be16_to_cpu(dup->freetag) |
| == XFS_DIR2_DATA_FREE_TAG) { |
| |
| length = be16_to_cpu(dup->length); |
| ptr += length; |
| continue; |
| } |
| dep = (xfs_dir2_data_entry_t *)ptr; |
| length = |
| xfs_dir3_data_entsize(mp, dep->namelen); |
| ptr += length; |
| } |
| /* |
| * Now set our real offset. |
| */ |
| curoff = |
| xfs_dir2_db_off_to_byte(mp, |
| xfs_dir2_byte_to_db(mp, curoff), |
| (char *)ptr - (char *)hdr); |
| if (ptr >= (char *)hdr + mp->m_dirblksize) { |
| continue; |
| } |
| } |
| } |
| /* |
| * We have a pointer to an entry. |
| * Is it a live one? |
| */ |
| dup = (xfs_dir2_data_unused_t *)ptr; |
| /* |
| * No, it's unused, skip over it. |
| */ |
| if (be16_to_cpu(dup->freetag) == XFS_DIR2_DATA_FREE_TAG) { |
| length = be16_to_cpu(dup->length); |
| ptr += length; |
| curoff += length; |
| continue; |
| } |
| |
| dep = (xfs_dir2_data_entry_t *)ptr; |
| length = xfs_dir3_data_entsize(mp, dep->namelen); |
| filetype = xfs_dir3_dirent_get_ftype(mp, dep); |
| |
| ctx->pos = xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff; |
| if (!dir_emit(ctx, (char *)dep->name, dep->namelen, |
| be64_to_cpu(dep->inumber), |
| xfs_dir3_get_dtype(mp, filetype))) |
| break; |
| |
| /* |
| * Advance to next entry in the block. |
| */ |
| ptr += length; |
| curoff += length; |
| /* bufsize may have just been a guess; don't go negative */ |
| bufsize = bufsize > length ? bufsize - length : 0; |
| } |
| |
| /* |
| * All done. Set output offset value to current offset. |
| */ |
| if (curoff > xfs_dir2_dataptr_to_byte(mp, XFS_DIR2_MAX_DATAPTR)) |
| ctx->pos = XFS_DIR2_MAX_DATAPTR & 0x7fffffff; |
| else |
| ctx->pos = xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff; |
| kmem_free(map_info); |
| if (bp) |
| xfs_trans_brelse(NULL, bp); |
| return error; |
| } |
| |
| /* |
| * Read a directory. |
| */ |
| int |
| xfs_readdir( |
| xfs_inode_t *dp, |
| struct dir_context *ctx, |
| size_t bufsize) |
| { |
| int rval; /* return value */ |
| int v; /* type-checking value */ |
| |
| trace_xfs_readdir(dp); |
| |
| if (XFS_FORCED_SHUTDOWN(dp->i_mount)) |
| return XFS_ERROR(EIO); |
| |
| ASSERT(S_ISDIR(dp->i_d.di_mode)); |
| XFS_STATS_INC(xs_dir_getdents); |
| |
| if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) |
| rval = xfs_dir2_sf_getdents(dp, ctx); |
| else if ((rval = xfs_dir2_isblock(NULL, dp, &v))) |
| ; |
| else if (v) |
| rval = xfs_dir2_block_getdents(dp, ctx); |
| else |
| rval = xfs_dir2_leaf_getdents(dp, ctx, bufsize); |
| return rval; |
| } |