| /* |
| * sbp2.h - Defines and prototypes for sbp2.c |
| * |
| * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com) |
| * jamesg@filanet.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #ifndef SBP2_H |
| #define SBP2_H |
| |
| #define SBP2_DEVICE_NAME "sbp2" |
| |
| /* |
| * SBP2 specific structures and defines |
| */ |
| |
| #define ORB_DIRECTION_WRITE_TO_MEDIA 0x0 |
| #define ORB_DIRECTION_READ_FROM_MEDIA 0x1 |
| #define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 |
| |
| #define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31) |
| #define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) |
| #define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ |
| #define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16) |
| #define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id)) |
| #define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff) |
| #define ORB_SET_DATA_SIZE(value) (value & 0xffff) |
| #define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) |
| #define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) |
| #define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) |
| #define ORB_SET_SPEED(value) ((value & 0x7) << 24) |
| #define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) |
| |
| struct sbp2_command_orb { |
| volatile u32 next_ORB_hi; |
| volatile u32 next_ORB_lo; |
| u32 data_descriptor_hi; |
| u32 data_descriptor_lo; |
| u32 misc; |
| u8 cdb[12]; |
| }; |
| |
| #define SBP2_LOGIN_REQUEST 0x0 |
| #define SBP2_QUERY_LOGINS_REQUEST 0x1 |
| #define SBP2_RECONNECT_REQUEST 0x3 |
| #define SBP2_SET_PASSWORD_REQUEST 0x4 |
| #define SBP2_LOGOUT_REQUEST 0x7 |
| #define SBP2_ABORT_TASK_REQUEST 0xb |
| #define SBP2_ABORT_TASK_SET 0xc |
| #define SBP2_LOGICAL_UNIT_RESET 0xe |
| #define SBP2_TARGET_RESET_REQUEST 0xf |
| |
| #define ORB_SET_LUN(value) (value & 0xffff) |
| #define ORB_SET_FUNCTION(value) ((value & 0xf) << 16) |
| #define ORB_SET_RECONNECT(value) ((value & 0xf) << 20) |
| #define ORB_SET_EXCLUSIVE(value) ((value & 0x1) << 28) |
| #define ORB_SET_LOGIN_RESP_LENGTH(value) (value & 0xffff) |
| #define ORB_SET_PASSWD_LENGTH(value) ((value & 0xffff) << 16) |
| |
| struct sbp2_login_orb { |
| u32 password_hi; |
| u32 password_lo; |
| u32 login_response_hi; |
| u32 login_response_lo; |
| u32 lun_misc; |
| u32 passwd_resp_lengths; |
| u32 status_fifo_hi; |
| u32 status_fifo_lo; |
| }; |
| |
| #define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff) |
| #define RESPONSE_GET_LENGTH(value) ((value >> 16) & 0xffff) |
| #define RESPONSE_GET_RECONNECT_HOLD(value) (value & 0xffff) |
| |
| struct sbp2_login_response { |
| u32 length_login_ID; |
| u32 command_block_agent_hi; |
| u32 command_block_agent_lo; |
| u32 reconnect_hold; |
| }; |
| |
| #define ORB_SET_LOGIN_ID(value) (value & 0xffff) |
| |
| #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff) |
| |
| struct sbp2_query_logins_orb { |
| u32 reserved1; |
| u32 reserved2; |
| u32 query_response_hi; |
| u32 query_response_lo; |
| u32 lun_misc; |
| u32 reserved_resp_length; |
| u32 status_fifo_hi; |
| u32 status_fifo_lo; |
| }; |
| |
| #define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff) |
| #define RESPONSE_GET_ACTIVE_LOGINS(value) ((RESPONSE_GET_LENGTH(value) - 4) / 12) |
| |
| struct sbp2_query_logins_response { |
| u32 length_max_logins; |
| u32 misc_IDs; |
| u32 initiator_misc_hi; |
| u32 initiator_misc_lo; |
| }; |
| |
| struct sbp2_reconnect_orb { |
| u32 reserved1; |
| u32 reserved2; |
| u32 reserved3; |
| u32 reserved4; |
| u32 login_ID_misc; |
| u32 reserved5; |
| u32 status_fifo_hi; |
| u32 status_fifo_lo; |
| }; |
| |
| struct sbp2_logout_orb { |
| u32 reserved1; |
| u32 reserved2; |
| u32 reserved3; |
| u32 reserved4; |
| u32 login_ID_misc; |
| u32 reserved5; |
| u32 status_fifo_hi; |
| u32 status_fifo_lo; |
| }; |
| |
| #define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff) |
| #define PAGE_TABLE_SET_SEGMENT_LENGTH(value) ((value & 0xffff) << 16) |
| |
| struct sbp2_unrestricted_page_table { |
| u32 length_segment_base_hi; |
| u32 segment_base_lo; |
| }; |
| |
| #define RESP_STATUS_REQUEST_COMPLETE 0x0 |
| #define RESP_STATUS_TRANSPORT_FAILURE 0x1 |
| #define RESP_STATUS_ILLEGAL_REQUEST 0x2 |
| #define RESP_STATUS_VENDOR_DEPENDENT 0x3 |
| |
| #define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0 |
| #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1 |
| #define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2 |
| #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3 |
| #define SBP2_STATUS_ACCESS_DENIED 0x4 |
| #define SBP2_STATUS_LU_NOT_SUPPORTED 0x5 |
| #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6 |
| #define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8 |
| #define SBP2_STATUS_FUNCTION_REJECTED 0x9 |
| #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa |
| #define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb |
| #define SBP2_STATUS_REQUEST_ABORTED 0xc |
| #define SBP2_STATUS_UNSPECIFIED_ERROR 0xff |
| |
| #define SFMT_CURRENT_ERROR 0x0 |
| #define SFMT_DEFERRED_ERROR 0x1 |
| #define SFMT_VENDOR_DEPENDENT_STATUS 0x3 |
| |
| #define SBP2_SCSI_STATUS_GOOD 0x0 |
| #define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2 |
| #define SBP2_SCSI_STATUS_CONDITION_MET 0x4 |
| #define SBP2_SCSI_STATUS_BUSY 0x8 |
| #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18 |
| #define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22 |
| |
| #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff |
| |
| #define STATUS_GET_ORB_OFFSET_HI(value) (value & 0xffff) |
| #define STATUS_GET_SBP_STATUS(value) ((value >> 16) & 0xff) |
| #define STATUS_GET_LENGTH(value) ((value >> 24) & 0x7) |
| #define STATUS_GET_DEAD_BIT(value) ((value >> 27) & 0x1) |
| #define STATUS_GET_RESP(value) ((value >> 28) & 0x3) |
| #define STATUS_GET_SRC(value) ((value >> 30) & 0x3) |
| |
| struct sbp2_status_block { |
| u32 ORB_offset_hi_misc; |
| u32 ORB_offset_lo; |
| u8 command_set_dependent[24]; |
| }; |
| |
| /* |
| * Miscellaneous SBP2 related config rom defines |
| */ |
| |
| #define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 |
| #define SBP2_CSR_OFFSET_KEY 0x54 |
| #define SBP2_UNIT_SPEC_ID_KEY 0x12 |
| #define SBP2_UNIT_SW_VERSION_KEY 0x13 |
| #define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38 |
| #define SBP2_COMMAND_SET_KEY 0x39 |
| #define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a |
| #define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14 |
| #define SBP2_FIRMWARE_REVISION_KEY 0x3c |
| |
| #define SBP2_AGENT_STATE_OFFSET 0x00ULL |
| #define SBP2_AGENT_RESET_OFFSET 0x04ULL |
| #define SBP2_ORB_POINTER_OFFSET 0x08ULL |
| #define SBP2_DOORBELL_OFFSET 0x10ULL |
| #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL |
| #define SBP2_UNSOLICITED_STATUS_VALUE 0xf |
| |
| #define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL |
| #define SBP2_BUSY_TIMEOUT_VALUE 0xf |
| |
| #define SBP2_AGENT_RESET_DATA 0xf |
| |
| /* |
| * Unit spec id and sw version entry for SBP-2 devices |
| */ |
| |
| #define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e |
| #define SBP2_SW_VERSION_ENTRY 0x00010483 |
| |
| /* |
| * SCSI specific stuff |
| */ |
| |
| #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 |
| #define SBP2_MAX_SECTORS 255 /* Max sectors supported */ |
| #define SBP2_MAX_CMDS 8 /* This should be safe */ |
| |
| /* Flags for detected oddities and brokeness */ |
| #define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 |
| #define SBP2_WORKAROUND_INQUIRY_36 0x2 |
| #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 |
| #define SBP2_WORKAROUND_FIX_CAPACITY 0x8 |
| #define SBP2_WORKAROUND_OVERRIDE 0x100 |
| |
| /* This is the two dma types we use for cmd_dma below */ |
| enum cmd_dma_types { |
| CMD_DMA_NONE, |
| CMD_DMA_PAGE, |
| CMD_DMA_SINGLE |
| }; |
| |
| /* |
| * Encapsulates all the info necessary for an outstanding command. |
| */ |
| struct sbp2_command_info { |
| |
| struct list_head list; |
| struct sbp2_command_orb command_orb ____cacheline_aligned; |
| dma_addr_t command_orb_dma ____cacheline_aligned; |
| struct scsi_cmnd *Current_SCpnt; |
| void (*Current_done)(struct scsi_cmnd *); |
| |
| /* Also need s/g structure for each sbp2 command */ |
| struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned; |
| dma_addr_t sge_dma ____cacheline_aligned; |
| void *sge_buffer; |
| dma_addr_t cmd_dma; |
| enum cmd_dma_types dma_type; |
| unsigned long dma_size; |
| int dma_dir; |
| |
| }; |
| |
| struct sbp2scsi_host_info; |
| |
| /* |
| * Information needed on a per scsi id basis (one for each sbp2 device) |
| */ |
| struct scsi_id_instance_data { |
| /* |
| * Various sbp2 specific structures |
| */ |
| struct sbp2_command_orb *last_orb; |
| dma_addr_t last_orb_dma; |
| struct sbp2_login_orb *login_orb; |
| dma_addr_t login_orb_dma; |
| struct sbp2_login_response *login_response; |
| dma_addr_t login_response_dma; |
| struct sbp2_query_logins_orb *query_logins_orb; |
| dma_addr_t query_logins_orb_dma; |
| struct sbp2_query_logins_response *query_logins_response; |
| dma_addr_t query_logins_response_dma; |
| struct sbp2_reconnect_orb *reconnect_orb; |
| dma_addr_t reconnect_orb_dma; |
| struct sbp2_logout_orb *logout_orb; |
| dma_addr_t logout_orb_dma; |
| struct sbp2_status_block status_block; |
| |
| /* |
| * Stuff we need to know about the sbp2 device itself |
| */ |
| u64 sbp2_management_agent_addr; |
| u64 sbp2_command_block_agent_addr; |
| u32 speed_code; |
| u32 max_payload_size; |
| |
| /* |
| * Values pulled from the device's unit directory |
| */ |
| u32 sbp2_command_set_spec_id; |
| u32 sbp2_command_set; |
| u32 sbp2_unit_characteristics; |
| u32 sbp2_lun; |
| u32 sbp2_firmware_revision; |
| |
| /* |
| * Address for the device to write status blocks to |
| */ |
| u64 status_fifo_addr; |
| |
| /* |
| * Variable used for logins, reconnects, logouts, query logins |
| */ |
| atomic_t sbp2_login_complete; |
| |
| /* |
| * Pool of command orbs, so we can have more than overlapped command per id |
| */ |
| spinlock_t sbp2_command_orb_lock; |
| struct list_head sbp2_command_orb_inuse; |
| struct list_head sbp2_command_orb_completed; |
| |
| struct list_head scsi_list; |
| |
| /* Node entry, as retrieved from NodeMgr entries */ |
| struct node_entry *ne; |
| struct unit_directory *ud; |
| |
| /* A backlink to our host_info */ |
| struct sbp2scsi_host_info *hi; |
| |
| /* SCSI related pointers */ |
| struct scsi_device *sdev; |
| struct Scsi_Host *scsi_host; |
| |
| /* Device specific workarounds/brokeness */ |
| unsigned workarounds; |
| }; |
| |
| /* Sbp2 host data structure (one per IEEE1394 host) */ |
| struct sbp2scsi_host_info { |
| struct hpsb_host *host; /* IEEE1394 host */ |
| struct list_head scsi_ids; /* List of scsi ids on this host */ |
| }; |
| |
| /* |
| * Function prototypes |
| */ |
| |
| /* |
| * Various utility prototypes |
| */ |
| static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id); |
| static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id); |
| static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb); |
| static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt); |
| static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id, |
| struct scsi_cmnd *Current_SCpnt, |
| void (*Current_done)(struct scsi_cmnd *)); |
| static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, |
| struct sbp2_command_info *command); |
| |
| |
| static int sbp2_start_device(struct scsi_id_instance_data *scsi_id); |
| static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id); |
| |
| #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA |
| static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, |
| u64 addr, size_t length, u16 flags); |
| static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, |
| u64 addr, size_t length, u16 flags); |
| #endif |
| |
| /* |
| * SBP-2 protocol related prototypes |
| */ |
| static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id); |
| static int sbp2_login_device(struct scsi_id_instance_data *scsi_id); |
| static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id); |
| static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id); |
| static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, |
| quadlet_t *data, u64 addr, size_t length, u16 flags); |
| static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait); |
| static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, |
| struct sbp2_command_info *command); |
| static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, |
| struct scsi_cmnd *SCpnt, |
| void (*done)(struct scsi_cmnd *)); |
| static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data); |
| static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, |
| struct scsi_cmnd *SCpnt); |
| static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, |
| struct unit_directory *ud); |
| static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id); |
| static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id); |
| |
| #endif /* SBP2_H */ |