| /* |
| * HDIC HD29L2 DMB-TH demodulator driver |
| * |
| * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D |
| * |
| * Author: Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "hd29l2_priv.h" |
| |
| #define HD29L2_MAX_LEN (3) |
| |
| /* write multiple registers */ |
| static int hd29l2_wr_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[2 + HD29L2_MAX_LEN]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->cfg.i2c_addr, |
| .flags = 0, |
| .len = 2 + len, |
| .buf = buf, |
| } |
| }; |
| |
| if (len > HD29L2_MAX_LEN) |
| return -EINVAL; |
| buf[0] = 0x00; |
| buf[1] = reg; |
| memcpy(&buf[2], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c wr failed=%d reg=%02x len=%d\n", |
| KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int hd29l2_rd_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[2] = { 0x00, reg }; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = priv->cfg.i2c_addr, |
| .flags = 0, |
| .len = 2, |
| .buf = buf, |
| }, { |
| .addr = priv->cfg.i2c_addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = val, |
| } |
| }; |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c rd failed=%d reg=%02x len=%d\n", |
| KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* write single register */ |
| static int hd29l2_wr_reg(struct hd29l2_priv *priv, u8 reg, u8 val) |
| { |
| return hd29l2_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int hd29l2_rd_reg(struct hd29l2_priv *priv, u8 reg, u8 *val) |
| { |
| return hd29l2_rd_regs(priv, reg, val, 1); |
| } |
| |
| /* write single register with mask */ |
| static int hd29l2_wr_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 val, u8 mask) |
| { |
| int ret; |
| u8 tmp; |
| |
| /* no need for read if whole reg is written */ |
| if (mask != 0xff) { |
| ret = hd29l2_rd_regs(priv, reg, &tmp, 1); |
| if (ret) |
| return ret; |
| |
| val &= mask; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| return hd29l2_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register with mask */ |
| static int hd29l2_rd_reg_mask(struct hd29l2_priv *priv, u8 reg, u8 *val, u8 mask) |
| { |
| int ret, i; |
| u8 tmp; |
| |
| ret = hd29l2_rd_regs(priv, reg, &tmp, 1); |
| if (ret) |
| return ret; |
| |
| tmp &= mask; |
| |
| /* find position of the first bit */ |
| for (i = 0; i < 8; i++) { |
| if ((mask >> i) & 0x01) |
| break; |
| } |
| *val = tmp >> i; |
| |
| return 0; |
| } |
| |
| static int hd29l2_soft_reset(struct hd29l2_priv *priv) |
| { |
| int ret; |
| u8 tmp; |
| |
| ret = hd29l2_rd_reg(priv, 0x26, &tmp); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_wr_reg(priv, 0x26, 0x0d); |
| if (ret) |
| goto err; |
| |
| usleep_range(10000, 20000); |
| |
| ret = hd29l2_wr_reg(priv, 0x26, tmp); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| int ret, i; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 tmp; |
| |
| dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); |
| |
| /* set tuner address for demod */ |
| if (!priv->tuner_i2c_addr_programmed && enable) { |
| /* no need to set tuner address every time, once is enough */ |
| ret = hd29l2_wr_reg(priv, 0x9d, priv->cfg.tuner_i2c_addr << 1); |
| if (ret) |
| goto err; |
| |
| priv->tuner_i2c_addr_programmed = true; |
| } |
| |
| /* open / close gate */ |
| ret = hd29l2_wr_reg(priv, 0x9f, enable); |
| if (ret) |
| goto err; |
| |
| /* wait demod ready */ |
| for (i = 10; i; i--) { |
| ret = hd29l2_rd_reg(priv, 0x9e, &tmp); |
| if (ret) |
| goto err; |
| |
| if (tmp == enable) |
| break; |
| |
| usleep_range(5000, 10000); |
| } |
| |
| dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); |
| |
| return ret; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| int ret; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 buf[2]; |
| |
| *status = 0; |
| |
| ret = hd29l2_rd_reg(priv, 0x05, &buf[0]); |
| if (ret) |
| goto err; |
| |
| if (buf[0] & 0x01) { |
| /* full lock */ |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| } else { |
| ret = hd29l2_rd_reg(priv, 0x0d, &buf[1]); |
| if (ret) |
| goto err; |
| |
| if ((buf[1] & 0xfe) == 0x78) |
| /* partial lock */ |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC; |
| } |
| |
| priv->fe_status = *status; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| int ret; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 buf[2]; |
| u16 tmp; |
| |
| if (!(priv->fe_status & FE_HAS_LOCK)) { |
| *snr = 0; |
| ret = 0; |
| goto err; |
| } |
| |
| ret = hd29l2_rd_regs(priv, 0x0b, buf, 2); |
| if (ret) |
| goto err; |
| |
| tmp = (buf[0] << 8) | buf[1]; |
| |
| /* report SNR in dB * 10 */ |
| #define LOG10_20736_24 72422627 /* log10(20736) << 24 */ |
| if (tmp) |
| *snr = (LOG10_20736_24 - intlog10(tmp)) / ((1 << 24) / 100); |
| else |
| *snr = 0; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| int ret; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 buf[2]; |
| u16 tmp; |
| |
| *strength = 0; |
| |
| ret = hd29l2_rd_regs(priv, 0xd5, buf, 2); |
| if (ret) |
| goto err; |
| |
| tmp = buf[0] << 8 | buf[1]; |
| tmp = ~tmp & 0x0fff; |
| |
| /* scale value to 0x0000-0xffff from 0x0000-0x0fff */ |
| *strength = tmp * 0xffff / 0x0fff; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| int ret; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 buf[2]; |
| |
| if (!(priv->fe_status & FE_HAS_SYNC)) { |
| *ber = 0; |
| ret = 0; |
| goto err; |
| } |
| |
| ret = hd29l2_rd_regs(priv, 0xd9, buf, 2); |
| if (ret) { |
| *ber = 0; |
| goto err; |
| } |
| |
| /* LDPC BER */ |
| *ber = ((buf[0] & 0x0f) << 8) | buf[1]; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| /* no way to read? */ |
| *ucblocks = 0; |
| return 0; |
| } |
| |
| static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) |
| { |
| int ret, i; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| u8 tmp, buf[3]; |
| u8 modulation, carrier, guard_interval, interleave, code_rate; |
| u64 num64; |
| u32 if_freq, if_ctl; |
| bool auto_mode; |
| |
| dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ |
| "bandwidth_hz=%d modulation=%d inversion=%d " \ |
| "fec_inner=%d guard_interval=%d\n", __func__, |
| c->delivery_system, c->frequency, c->bandwidth_hz, |
| c->modulation, c->inversion, c->fec_inner, |
| c->guard_interval); |
| |
| /* as for now we detect always params automatically */ |
| auto_mode = true; |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| /* get and program IF */ |
| if (fe->ops.tuner_ops.get_if_frequency) |
| fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); |
| else |
| if_freq = 0; |
| |
| if (if_freq) { |
| /* normal IF */ |
| |
| /* calc IF control value */ |
| num64 = if_freq; |
| num64 *= 0x800000; |
| num64 = div_u64(num64, HD29L2_XTAL); |
| num64 -= 0x800000; |
| if_ctl = num64; |
| |
| tmp = 0xfc; /* tuner type normal */ |
| } else { |
| /* zero IF */ |
| if_ctl = 0; |
| tmp = 0xfe; /* tuner type Zero-IF */ |
| } |
| |
| buf[0] = ((if_ctl >> 0) & 0xff); |
| buf[1] = ((if_ctl >> 8) & 0xff); |
| buf[2] = ((if_ctl >> 16) & 0xff); |
| |
| /* program IF control */ |
| ret = hd29l2_wr_regs(priv, 0x14, buf, 3); |
| if (ret) |
| goto err; |
| |
| /* program tuner type */ |
| ret = hd29l2_wr_reg(priv, 0xab, tmp); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&priv->i2c->dev, "%s: if_freq=%d if_ctl=%x\n", |
| __func__, if_freq, if_ctl); |
| |
| if (auto_mode) { |
| /* |
| * use auto mode |
| */ |
| |
| /* disable quick mode */ |
| ret = hd29l2_wr_reg_mask(priv, 0xac, 0 << 7, 0x80); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_wr_reg_mask(priv, 0x82, 1 << 1, 0x02); |
| if (ret) |
| goto err; |
| |
| /* enable auto mode */ |
| ret = hd29l2_wr_reg_mask(priv, 0x7d, 1 << 6, 0x40); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_wr_reg_mask(priv, 0x81, 1 << 3, 0x08); |
| if (ret) |
| goto err; |
| |
| /* soft reset */ |
| ret = hd29l2_soft_reset(priv); |
| if (ret) |
| goto err; |
| |
| /* detect modulation */ |
| for (i = 30; i; i--) { |
| msleep(100); |
| |
| ret = hd29l2_rd_reg(priv, 0x0d, &tmp); |
| if (ret) |
| goto err; |
| |
| if ((((tmp & 0xf0) >= 0x10) && |
| ((tmp & 0x0f) == 0x08)) || (tmp >= 0x2c)) |
| break; |
| } |
| |
| dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); |
| |
| if (i == 0) |
| /* detection failed */ |
| return DVBFE_ALGO_SEARCH_FAILED; |
| |
| /* read modulation */ |
| ret = hd29l2_rd_reg_mask(priv, 0x7d, &modulation, 0x07); |
| if (ret) |
| goto err; |
| } else { |
| /* |
| * use manual mode |
| */ |
| |
| modulation = HD29L2_QAM64; |
| carrier = HD29L2_CARRIER_MULTI; |
| guard_interval = HD29L2_PN945; |
| interleave = HD29L2_INTERLEAVER_420; |
| code_rate = HD29L2_CODE_RATE_08; |
| |
| tmp = (code_rate << 3) | modulation; |
| ret = hd29l2_wr_reg_mask(priv, 0x7d, tmp, 0x5f); |
| if (ret) |
| goto err; |
| |
| tmp = (carrier << 2) | guard_interval; |
| ret = hd29l2_wr_reg_mask(priv, 0x81, tmp, 0x0f); |
| if (ret) |
| goto err; |
| |
| tmp = interleave; |
| ret = hd29l2_wr_reg_mask(priv, 0x82, tmp, 0x03); |
| if (ret) |
| goto err; |
| } |
| |
| /* ensure modulation validy */ |
| /* 0=QAM4_NR, 1=QAM4, 2=QAM16, 3=QAM32, 4=QAM64 */ |
| if (modulation > (ARRAY_SIZE(reg_mod_vals_tab[0].val) - 1)) { |
| dev_dbg(&priv->i2c->dev, "%s: modulation=%d not valid\n", |
| __func__, modulation); |
| goto err; |
| } |
| |
| /* program registers according to modulation */ |
| for (i = 0; i < ARRAY_SIZE(reg_mod_vals_tab); i++) { |
| ret = hd29l2_wr_reg(priv, reg_mod_vals_tab[i].reg, |
| reg_mod_vals_tab[i].val[modulation]); |
| if (ret) |
| goto err; |
| } |
| |
| /* read guard interval */ |
| ret = hd29l2_rd_reg_mask(priv, 0x81, &guard_interval, 0x03); |
| if (ret) |
| goto err; |
| |
| /* read carrier mode */ |
| ret = hd29l2_rd_reg_mask(priv, 0x81, &carrier, 0x04); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&priv->i2c->dev, |
| "%s: modulation=%d guard_interval=%d carrier=%d\n", |
| __func__, modulation, guard_interval, carrier); |
| |
| if ((carrier == HD29L2_CARRIER_MULTI) && (modulation == HD29L2_QAM64) && |
| (guard_interval == HD29L2_PN945)) { |
| dev_dbg(&priv->i2c->dev, "%s: C=3780 && QAM64 && PN945\n", |
| __func__); |
| |
| ret = hd29l2_wr_reg(priv, 0x42, 0x33); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_wr_reg(priv, 0xdd, 0x01); |
| if (ret) |
| goto err; |
| } |
| |
| usleep_range(10000, 20000); |
| |
| /* soft reset */ |
| ret = hd29l2_soft_reset(priv); |
| if (ret) |
| goto err; |
| |
| /* wait demod lock */ |
| for (i = 30; i; i--) { |
| msleep(100); |
| |
| /* read lock bit */ |
| ret = hd29l2_rd_reg_mask(priv, 0x05, &tmp, 0x01); |
| if (ret) |
| goto err; |
| |
| if (tmp) |
| break; |
| } |
| |
| dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); |
| |
| if (i == 0) |
| return DVBFE_ALGO_SEARCH_AGAIN; |
| |
| return DVBFE_ALGO_SEARCH_SUCCESS; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return DVBFE_ALGO_SEARCH_ERROR; |
| } |
| |
| static int hd29l2_get_frontend_algo(struct dvb_frontend *fe) |
| { |
| return DVBFE_ALGO_CUSTOM; |
| } |
| |
| static int hd29l2_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *c) |
| { |
| int ret; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 buf[3]; |
| u32 if_ctl; |
| char *str_constellation, *str_code_rate, *str_constellation_code_rate, |
| *str_guard_interval, *str_carrier, *str_guard_interval_carrier, |
| *str_interleave, *str_interleave_; |
| |
| ret = hd29l2_rd_reg(priv, 0x7d, &buf[0]); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_rd_regs(priv, 0x81, &buf[1], 2); |
| if (ret) |
| goto err; |
| |
| /* constellation, 0x7d[2:0] */ |
| switch ((buf[0] >> 0) & 0x07) { |
| case 0: /* QAM4NR */ |
| str_constellation = "QAM4NR"; |
| c->modulation = QAM_AUTO; /* FIXME */ |
| break; |
| case 1: /* QAM4 */ |
| str_constellation = "QAM4"; |
| c->modulation = QPSK; /* FIXME */ |
| break; |
| case 2: |
| str_constellation = "QAM16"; |
| c->modulation = QAM_16; |
| break; |
| case 3: |
| str_constellation = "QAM32"; |
| c->modulation = QAM_32; |
| break; |
| case 4: |
| str_constellation = "QAM64"; |
| c->modulation = QAM_64; |
| break; |
| default: |
| str_constellation = "?"; |
| } |
| |
| /* LDPC code rate, 0x7d[4:3] */ |
| switch ((buf[0] >> 3) & 0x03) { |
| case 0: /* 0.4 */ |
| str_code_rate = "0.4"; |
| c->fec_inner = FEC_AUTO; /* FIXME */ |
| break; |
| case 1: /* 0.6 */ |
| str_code_rate = "0.6"; |
| c->fec_inner = FEC_3_5; |
| break; |
| case 2: /* 0.8 */ |
| str_code_rate = "0.8"; |
| c->fec_inner = FEC_4_5; |
| break; |
| default: |
| str_code_rate = "?"; |
| } |
| |
| /* constellation & code rate set, 0x7d[6] */ |
| switch ((buf[0] >> 6) & 0x01) { |
| case 0: |
| str_constellation_code_rate = "manual"; |
| break; |
| case 1: |
| str_constellation_code_rate = "auto"; |
| break; |
| default: |
| str_constellation_code_rate = "?"; |
| } |
| |
| /* frame header, 0x81[1:0] */ |
| switch ((buf[1] >> 0) & 0x03) { |
| case 0: /* PN945 */ |
| str_guard_interval = "PN945"; |
| c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ |
| break; |
| case 1: /* PN595 */ |
| str_guard_interval = "PN595"; |
| c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ |
| break; |
| case 2: /* PN420 */ |
| str_guard_interval = "PN420"; |
| c->guard_interval = GUARD_INTERVAL_AUTO; /* FIXME */ |
| break; |
| default: |
| str_guard_interval = "?"; |
| } |
| |
| /* carrier, 0x81[2] */ |
| switch ((buf[1] >> 2) & 0x01) { |
| case 0: |
| str_carrier = "C=1"; |
| break; |
| case 1: |
| str_carrier = "C=3780"; |
| break; |
| default: |
| str_carrier = "?"; |
| } |
| |
| /* frame header & carrier set, 0x81[3] */ |
| switch ((buf[1] >> 3) & 0x01) { |
| case 0: |
| str_guard_interval_carrier = "manual"; |
| break; |
| case 1: |
| str_guard_interval_carrier = "auto"; |
| break; |
| default: |
| str_guard_interval_carrier = "?"; |
| } |
| |
| /* interleave, 0x82[0] */ |
| switch ((buf[2] >> 0) & 0x01) { |
| case 0: |
| str_interleave = "M=720"; |
| break; |
| case 1: |
| str_interleave = "M=240"; |
| break; |
| default: |
| str_interleave = "?"; |
| } |
| |
| /* interleave set, 0x82[1] */ |
| switch ((buf[2] >> 1) & 0x01) { |
| case 0: |
| str_interleave_ = "manual"; |
| break; |
| case 1: |
| str_interleave_ = "auto"; |
| break; |
| default: |
| str_interleave_ = "?"; |
| } |
| |
| /* |
| * We can read out current detected NCO and use that value next |
| * time instead of calculating new value from targed IF. |
| * I think it will not effect receiver sensitivity but gaining lock |
| * after tune could be easier... |
| */ |
| ret = hd29l2_rd_regs(priv, 0xb1, &buf[0], 3); |
| if (ret) |
| goto err; |
| |
| if_ctl = (buf[0] << 16) | ((buf[1] - 7) << 8) | buf[2]; |
| |
| dev_dbg(&priv->i2c->dev, "%s: %s %s %s | %s %s %s | %s %s | NCO=%06x\n", |
| __func__, str_constellation, str_code_rate, |
| str_constellation_code_rate, str_guard_interval, |
| str_carrier, str_guard_interval_carrier, str_interleave, |
| str_interleave_, if_ctl); |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int hd29l2_init(struct dvb_frontend *fe) |
| { |
| int ret, i; |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| u8 tmp; |
| static const struct reg_val tab[] = { |
| { 0x3a, 0x06 }, |
| { 0x3b, 0x03 }, |
| { 0x3c, 0x04 }, |
| { 0xaf, 0x06 }, |
| { 0xb0, 0x1b }, |
| { 0x80, 0x64 }, |
| { 0x10, 0x38 }, |
| }; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| /* reset demod */ |
| /* it is recommended to HW reset chip using RST_N pin */ |
| if (fe->callback) { |
| ret = fe->callback(fe, DVB_FRONTEND_COMPONENT_DEMOD, 0, 0); |
| if (ret) |
| goto err; |
| |
| /* reprogramming needed because HW reset clears registers */ |
| priv->tuner_i2c_addr_programmed = false; |
| } |
| |
| /* init */ |
| for (i = 0; i < ARRAY_SIZE(tab); i++) { |
| ret = hd29l2_wr_reg(priv, tab[i].reg, tab[i].val); |
| if (ret) |
| goto err; |
| } |
| |
| /* TS params */ |
| ret = hd29l2_rd_reg(priv, 0x36, &tmp); |
| if (ret) |
| goto err; |
| |
| tmp &= 0x1b; |
| tmp |= priv->cfg.ts_mode; |
| ret = hd29l2_wr_reg(priv, 0x36, tmp); |
| if (ret) |
| goto err; |
| |
| ret = hd29l2_rd_reg(priv, 0x31, &tmp); |
| tmp &= 0xef; |
| |
| if (!(priv->cfg.ts_mode >> 7)) |
| /* set b4 for serial TS */ |
| tmp |= 0x10; |
| |
| ret = hd29l2_wr_reg(priv, 0x31, tmp); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static void hd29l2_release(struct dvb_frontend *fe) |
| { |
| struct hd29l2_priv *priv = fe->demodulator_priv; |
| kfree(priv); |
| } |
| |
| static const struct dvb_frontend_ops hd29l2_ops; |
| |
| struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config, |
| struct i2c_adapter *i2c) |
| { |
| int ret; |
| struct hd29l2_priv *priv = NULL; |
| u8 tmp; |
| |
| /* allocate memory for the internal state */ |
| priv = kzalloc(sizeof(struct hd29l2_priv), GFP_KERNEL); |
| if (priv == NULL) |
| goto err; |
| |
| /* setup the state */ |
| priv->i2c = i2c; |
| memcpy(&priv->cfg, config, sizeof(struct hd29l2_config)); |
| |
| |
| /* check if the demod is there */ |
| ret = hd29l2_rd_reg(priv, 0x00, &tmp); |
| if (ret) |
| goto err; |
| |
| /* create dvb_frontend */ |
| memcpy(&priv->fe.ops, &hd29l2_ops, sizeof(struct dvb_frontend_ops)); |
| priv->fe.demodulator_priv = priv; |
| |
| return &priv->fe; |
| err: |
| kfree(priv); |
| return NULL; |
| } |
| EXPORT_SYMBOL(hd29l2_attach); |
| |
| static const struct dvb_frontend_ops hd29l2_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "HDIC HD29L2 DMB-TH", |
| .frequency_min = 474000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 10000, |
| .caps = FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_BANDWIDTH_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER |
| }, |
| |
| .release = hd29l2_release, |
| |
| .init = hd29l2_init, |
| |
| .get_frontend_algo = hd29l2_get_frontend_algo, |
| .search = hd29l2_search, |
| .get_frontend = hd29l2_get_frontend, |
| |
| .read_status = hd29l2_read_status, |
| .read_snr = hd29l2_read_snr, |
| .read_signal_strength = hd29l2_read_signal_strength, |
| .read_ber = hd29l2_read_ber, |
| .read_ucblocks = hd29l2_read_ucblocks, |
| |
| .i2c_gate_ctrl = hd29l2_i2c_gate_ctrl, |
| }; |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("HDIC HD29L2 DMB-TH demodulator driver"); |
| MODULE_LICENSE("GPL"); |