Documentation/admin-guide/bug-hunting.rst - LeafOS-Devices/android_kernel_samsung_exynos9820 - Gitiles

 Bug hunting
 ===========

 Kernel bug reports often come with a stack dump like the one below::

 	------------[ cut here ]------------
 	WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
 	Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
 	CPU: 1 PID: 28102 Comm: rmmod Tainted: P        WC O 4.8.4-build.1 #1
 	Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
 	 00000000 c12ba080 00000000 00000000 c103ed6a c1616014 00000001 00006dc6
 	 c1615862 00000454 c109e8a7 c109e8a7 00000009 ffffffff 00000000 f13f6a10
 	 f5f5a600 c103ee33 00000009 00000000 00000000 c109e8a7 f80ca4d0 c109f617
 	Call Trace:
 	 [<c12ba080>] ? dump_stack+0x44/0x64
 	 [<c103ed6a>] ? __warn+0xfa/0x120
 	 [<c109e8a7>] ? module_put+0x57/0x70
 	 [<c109e8a7>] ? module_put+0x57/0x70
 	 [<c103ee33>] ? warn_slowpath_null+0x23/0x30
 	 [<c109e8a7>] ? module_put+0x57/0x70
 	 [<f80ca4d0>] ? gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
 	 [<c109f617>] ? symbol_put_addr+0x27/0x50
 	 [<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
 	 [<f80bb3bf>] ? dvb_usb_exit+0x2f/0xd0 [dvb_usb]
 	 [<c13d03bc>] ? usb_disable_endpoint+0x7c/0xb0
 	 [<f80bb48a>] ? dvb_usb_device_exit+0x2a/0x50 [dvb_usb]
 	 [<c13d2882>] ? usb_unbind_interface+0x62/0x250
 	 [<c136b514>] ? __pm_runtime_idle+0x44/0x70
 	 [<c13620d8>] ? __device_release_driver+0x78/0x120
 	 [<c1362907>] ? driver_detach+0x87/0x90
 	 [<c1361c48>] ? bus_remove_driver+0x38/0x90
 	 [<c13d1c18>] ? usb_deregister+0x58/0xb0
 	 [<c109fbb0>] ? SyS_delete_module+0x130/0x1f0
 	 [<c1055654>] ? task_work_run+0x64/0x80
 	 [<c1000fa5>] ? exit_to_usermode_loop+0x85/0x90
 	 [<c10013f0>] ? do_fast_syscall_32+0x80/0x130
 	 [<c1549f43>] ? sysenter_past_esp+0x40/0x6a
 	---[ end trace 6ebc60ef3981792f ]---

 Such stack traces provide enough information to identify the line inside the
 Kernel's source code where the bug happened. Depending on the severity of
 the issue, it may also contain the word **Oops**, as on this one::

 	BUG: unable to handle kernel NULL pointer dereference at   (null)
 	IP: [<c06969d4>] iret_exc+0x7d0/0xa59
 	*pdpt = 000000002258a001 *pde = 0000000000000000
 	Oops: 0002 [#1] PREEMPT SMP
 	...

 Despite being an **Oops** or some other sort of stack trace, the offended
 line is usually required to identify and handle the bug. Along this chapter,
 we'll refer to "Oops" for all kinds of stack traces that need to be analized.

 .. note::

   ``ksymoops`` is useless on 2.6 or upper.  Please use the Oops in its original
   format (from ``dmesg``, etc).  Ignore any references in this or other docs to
   "decoding the Oops" or "running it through ksymoops".
   If you post an Oops from 2.6+ that has been run through ``ksymoops``,
   people will just tell you to repost it.

 Where is the Oops message is located?
 -------------------------------------

 Normally the Oops text is read from the kernel buffers by klogd and
 handed to ``syslogd`` which writes it to a syslog file, typically
 ``/var/log/messages`` (depends on ``/etc/syslog.conf``). On systems with
 systemd, it may also be stored by the ``journald`` daemon, and accessed
 by running ``journalctl`` command.

 Sometimes ``klogd`` dies, in which case you can run ``dmesg > file`` to
 read the data from the kernel buffers and save it.  Or you can
 ``cat /proc/kmsg > file``, however you have to break in to stop the transfer,
 ``kmsg`` is a "never ending file".

 If the machine has crashed so badly that you cannot enter commands or
 the disk is not available then you have three options:

 (1) Hand copy the text from the screen and type it in after the machine
     has restarted.  Messy but it is the only option if you have not
     planned for a crash. Alternatively, you can take a picture of
     the screen with a digital camera - not nice, but better than
     nothing.  If the messages scroll off the top of the console, you
     may find that booting with a higher resolution (eg, ``vga=791``)
     will allow you to read more of the text. (Caveat: This needs ``vesafb``,
     so won't help for 'early' oopses)

 (2) Boot with a serial console (see
     :ref:`Documentation/admin-guide/serial-console.rst <serial_console>`),
     run a null modem to a second machine and capture the output there
     using your favourite communication program.  Minicom works well.

 (3) Use Kdump (see Documentation/kdump/kdump.txt),
     extract the kernel ring buffer from old memory with using dmesg
     gdbmacro in Documentation/kdump/gdbmacros.txt.

 Finding the bug's location
 --------------------------

 Reporting a bug works best if you point the location of the bug at the
 Kernel source file. There are two methods for doing that. Usually, using
 ``gdb`` is easier, but the Kernel should be pre-compiled with debug info.

 gdb
 ^^^

 The GNU debug (``gdb``) is the best way to figure out the exact file and line
 number of the OOPS from the ``vmlinux`` file.

 The usage of gdb works best on a kernel compiled with ``CONFIG_DEBUG_INFO``.
 This can be set by running::

   $ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO

 On a kernel compiled with ``CONFIG_DEBUG_INFO``, you can simply copy the
 EIP value from the OOPS::

  EIP:    0060:[<c021e50e>]    Not tainted VLI

 And use GDB to translate that to human-readable form::

   $ gdb vmlinux
   (gdb) l *0xc021e50e

 If you don't have ``CONFIG_DEBUG_INFO`` enabled, you use the function
 offset from the OOPS::

  EIP is at vt_ioctl+0xda8/0x1482

 And recompile the kernel with ``CONFIG_DEBUG_INFO`` enabled::

   $ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO
   $ make vmlinux
   $ gdb vmlinux
   (gdb) l *vt_ioctl+0xda8
   0x1888 is in vt_ioctl (drivers/tty/vt/vt_ioctl.c:293).
   288	{
   289		struct vc_data *vc = NULL;
   290		int ret = 0;
   291
   292		console_lock();
   293		if (VT_BUSY(vc_num))
   294			ret = -EBUSY;
   295		else if (vc_num)
   296			vc = vc_deallocate(vc_num);
   297		console_unlock();

 or, if you want to be more verbose::

   (gdb) p vt_ioctl
   $1 = {int (struct tty_struct *, unsigned int, unsigned long)} 0xae0 <vt_ioctl>
   (gdb) l *0xae0+0xda8

 You could, instead, use the object file::

   $ make drivers/tty/
   $ gdb drivers/tty/vt/vt_ioctl.o
   (gdb) l *vt_ioctl+0xda8

 If you have a call trace, such as::

      Call Trace:
       [<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5
       [<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e
       [<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee
       ...

 this shows the problem likely in the :jbd: module. You can load that module
 in gdb and list the relevant code::

   $ gdb fs/jbd/jbd.ko
   (gdb) l *log_wait_commit+0xa3

 .. note::

      You can also do the same for any function call at the stack trace,
      like this one::

 	 [<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]

      The position where the above call happened can be seen with::

 	$ gdb drivers/media/usb/dvb-usb/dvb-usb.o
 	(gdb) l *dvb_usb_adapter_frontend_exit+0x3a

 objdump
 ^^^^^^^

 To debug a kernel, use objdump and look for the hex offset from the crash
 output to find the valid line of code/assembler. Without debug symbols, you
 will see the assembler code for the routine shown, but if your kernel has
 debug symbols the C code will also be available. (Debug symbols can be enabled
 in the kernel hacking menu of the menu configuration.) For example::

     $ objdump -r -S -l --disassemble net/dccp/ipv4.o

 .. note::

    You need to be at the top level of the kernel tree for this to pick up
    your C files.

 If you don't have access to the code you can also debug on some crash dumps
 e.g. crash dump output as shown by Dave Miller::

      EIP is at 	+0x14/0x4c0
       ...
      Code: 44 24 04 e8 6f 05 00 00 e9 e8 fe ff ff 8d 76 00 8d bc 27 00 00
      00 00 55 57  56 53 81 ec bc 00 00 00 8b ac 24 d0 00 00 00 8b 5d 08
      <8b> 83 3c 01 00 00 89 44  24 14 8b 45 28 85 c0 89 44 24 18 0f 85

      Put the bytes into a "foo.s" file like this:

             .text
             .globl foo
      foo:
             .byte  .... /* bytes from Code: part of OOPS dump */

      Compile it with "gcc -c -o foo.o foo.s" then look at the output of
      "objdump --disassemble foo.o".

      Output:

      ip_queue_xmit:
          push       %ebp
          push       %edi
          push       %esi
          push       %ebx
          sub        $0xbc, %esp
          mov        0xd0(%esp), %ebp        ! %ebp = arg0 (skb)
          mov        0x8(%ebp), %ebx         ! %ebx = skb->sk
          mov        0x13c(%ebx), %eax       ! %eax = inet_sk(sk)->opt

 Reporting the bug
 -----------------

 Once you find where the bug happened, by inspecting its location,
 you could either try to fix it yourself or report it upstream.

 In order to report it upstream, you should identify the mailing list
 used for the development of the affected code. This can be done by using
 the ``get_maintainer.pl`` script.

 For example, if you find a bug at the gspca's conex.c file, you can get
 their maintainers with::

 	$ ./scripts/get_maintainer.pl -f drivers/media/usb/gspca/sonixj.c
 	Hans Verkuil <hverkuil@xs4all.nl> (odd fixer:GSPCA USB WEBCAM DRIVER,commit_signer:1/1=100%)
 	Mauro Carvalho Chehab <mchehab@kernel.org> (maintainer:MEDIA INPUT INFRASTRUCTURE (V4L/DVB),commit_signer:1/1=100%)
 	Tejun Heo <tj@kernel.org> (commit_signer:1/1=100%)
 	Bhaktipriya Shridhar <bhaktipriya96@gmail.com> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%,removed_lines:9/9=100%)
 	linux-media@vger.kernel.org (open list:GSPCA USB WEBCAM DRIVER)
 	linux-kernel@vger.kernel.org (open list)

 Please notice that it will point to:

 - The last developers that touched on the source code. On the above example,
   Tejun and Bhaktipriya (in this specific case, none really envolved on the
   development of this file);
 - The driver maintainer (Hans Verkuil);
 - The subsystem maintainer (Mauro Carvalho Chehab)
 - The driver and/or subsystem mailing list (linux-media@vger.kernel.org);
 - the Linux Kernel mailing list (linux-kernel@vger.kernel.org).

 Usually, the fastest way to have your bug fixed is to report it to mailing
 list used for the development of the code (linux-media ML) copying the driver maintainer (Hans).

 If you are totally stumped as to whom to send the report, and
 ``get_maintainer.pl`` didn't provide you anything useful, send it to
 linux-kernel@vger.kernel.org.

 Thanks for your help in making Linux as stable as humanly possible.

 Fixing the bug
 --------------

 If you know programming, you could help us by not only reporting the bug,
 but also providing us with a solution. After all open source is about
 sharing what you do and don't you want to be recognised for your genius?

 If you decide to take this way, once you have worked out a fix please submit
 it upstream.

 Please do read
 ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though
 to help your code get accepted.


 ---------------------------------------------------------------------------

 Notes on Oops tracing with ``klogd``
 ------------------------------------

 In order to help Linus and the other kernel developers there has been
 substantial support incorporated into ``klogd`` for processing protection
 faults.  In order to have full support for address resolution at least
 version 1.3-pl3 of the ``sysklogd`` package should be used.

 When a protection fault occurs the ``klogd`` daemon automatically
 translates important addresses in the kernel log messages to their
 symbolic equivalents.  This translated kernel message is then
 forwarded through whatever reporting mechanism ``klogd`` is using.  The
 protection fault message can be simply cut out of the message files
 and forwarded to the kernel developers.

 Two types of address resolution are performed by ``klogd``.  The first is
 static translation and the second is dynamic translation.  Static
 translation uses the System.map file in much the same manner that
 ksymoops does.  In order to do static translation the ``klogd`` daemon
 must be able to find a system map file at daemon initialization time.
 See the klogd man page for information on how ``klogd`` searches for map
 files.

 Dynamic address translation is important when kernel loadable modules
 are being used.  Since memory for kernel modules is allocated from the
 kernel's dynamic memory pools there are no fixed locations for either
 the start of the module or for functions and symbols in the module.

 The kernel supports system calls which allow a program to determine
 which modules are loaded and their location in memory.  Using these
 system calls the klogd daemon builds a symbol table which can be used
 to debug a protection fault which occurs in a loadable kernel module.

 At the very minimum klogd will provide the name of the module which
 generated the protection fault.  There may be additional symbolic
 information available if the developer of the loadable module chose to
 export symbol information from the module.

 Since the kernel module environment can be dynamic there must be a
 mechanism for notifying the ``klogd`` daemon when a change in module
 environment occurs.  There are command line options available which
 allow klogd to signal the currently executing daemon that symbol
 information should be refreshed.  See the ``klogd`` manual page for more
 information.

 A patch is included with the sysklogd distribution which modifies the
 ``modules-2.0.0`` package to automatically signal klogd whenever a module
 is loaded or unloaded.  Applying this patch provides essentially
 seamless support for debugging protection faults which occur with
 kernel loadable modules.

 The following is an example of a protection fault in a loadable module
 processed by ``klogd``::

 	Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc
 	Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000
 	Aug 29 09:51:01 blizard kernel: *pde = 00000000
 	Aug 29 09:51:01 blizard kernel: Oops: 0002
 	Aug 29 09:51:01 blizard kernel: CPU:    0
 	Aug 29 09:51:01 blizard kernel: EIP:    0010:[oops:_oops+16/3868]
 	Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212
 	Aug 29 09:51:01 blizard kernel: eax: 315e97cc   ebx: 003a6f80   ecx: 001be77b   edx: 00237c0c
 	Aug 29 09:51:01 blizard kernel: esi: 00000000   edi: bffffdb3   ebp: 00589f90   esp: 00589f8c
 	Aug 29 09:51:01 blizard kernel: ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
 	Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000)
 	Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001
 	Aug 29 09:51:01 blizard kernel:        00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00
 	Aug 29 09:51:01 blizard kernel:        bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036
 	Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128]
 	Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3

 ---------------------------------------------------------------------------

 ::

   Dr. G.W. Wettstein           Oncology Research Div. Computing Facility
   Roger Maris Cancer Center    INTERNET: greg@wind.rmcc.com
   820 4th St. N.
   Fargo, ND  58122
   Phone: 701-234-7556
	Bug hunting
	===========

	Kernel bug reports often come with a stack dump like the one below::

	------------[ cut here ]------------
	WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
	Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
	CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1
	Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
	00000000 c12ba080 00000000 00000000 c103ed6a c1616014 00000001 00006dc6
	c1615862 00000454 c109e8a7 c109e8a7 00000009 ffffffff 00000000 f13f6a10
	f5f5a600 c103ee33 00000009 00000000 00000000 c109e8a7 f80ca4d0 c109f617
	Call Trace:
	[<c12ba080>] ? dump_stack+0x44/0x64
	[<c103ed6a>] ? __warn+0xfa/0x120
	[<c109e8a7>] ? module_put+0x57/0x70
	[<c109e8a7>] ? module_put+0x57/0x70
	[<c103ee33>] ? warn_slowpath_null+0x23/0x30
	[<c109e8a7>] ? module_put+0x57/0x70
	[<f80ca4d0>] ? gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
	[<c109f617>] ? symbol_put_addr+0x27/0x50
	[<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
	[<f80bb3bf>] ? dvb_usb_exit+0x2f/0xd0 [dvb_usb]
	[<c13d03bc>] ? usb_disable_endpoint+0x7c/0xb0
	[<f80bb48a>] ? dvb_usb_device_exit+0x2a/0x50 [dvb_usb]
	[<c13d2882>] ? usb_unbind_interface+0x62/0x250
	[<c136b514>] ? __pm_runtime_idle+0x44/0x70
	[<c13620d8>] ? __device_release_driver+0x78/0x120
	[<c1362907>] ? driver_detach+0x87/0x90
	[<c1361c48>] ? bus_remove_driver+0x38/0x90
	[<c13d1c18>] ? usb_deregister+0x58/0xb0
	[<c109fbb0>] ? SyS_delete_module+0x130/0x1f0
	[<c1055654>] ? task_work_run+0x64/0x80
	[<c1000fa5>] ? exit_to_usermode_loop+0x85/0x90
	[<c10013f0>] ? do_fast_syscall_32+0x80/0x130
	[<c1549f43>] ? sysenter_past_esp+0x40/0x6a
	---[ end trace 6ebc60ef3981792f ]---

	Such stack traces provide enough information to identify the line inside the
	Kernel's source code where the bug happened. Depending on the severity of
	the issue, it may also contain the word Oops, as on this one::

	BUG: unable to handle kernel NULL pointer dereference at (null)
	IP: [<c06969d4>] iret_exc+0x7d0/0xa59
	pdpt = 000000002258a001 pde = 0000000000000000
	Oops: 0002 [#1] PREEMPT SMP
	...

	Despite being an Oops or some other sort of stack trace, the offended
	line is usually required to identify and handle the bug. Along this chapter,
	we'll refer to "Oops" for all kinds of stack traces that need to be analized.

	.. note::

	``ksymoops`` is useless on 2.6 or upper. Please use the Oops in its original
	format (from ``dmesg``, etc). Ignore any references in this or other docs to
	"decoding the Oops" or "running it through ksymoops".
	If you post an Oops from 2.6+ that has been run through ``ksymoops``,
	people will just tell you to repost it.

	Where is the Oops message is located?
	-------------------------------------

	Normally the Oops text is read from the kernel buffers by klogd and
	handed to ``syslogd`` which writes it to a syslog file, typically
	``/var/log/messages`` (depends on ``/etc/syslog.conf``). On systems with
	systemd, it may also be stored by the ``journald`` daemon, and accessed
	by running ``journalctl`` command.

	Sometimes ``klogd`` dies, in which case you can run ``dmesg > file`` to
	read the data from the kernel buffers and save it. Or you can
	``cat /proc/kmsg > file``, however you have to break in to stop the transfer,
	``kmsg`` is a "never ending file".

	If the machine has crashed so badly that you cannot enter commands or
	the disk is not available then you have three options:

	(1) Hand copy the text from the screen and type it in after the machine
	has restarted. Messy but it is the only option if you have not
	planned for a crash. Alternatively, you can take a picture of
	the screen with a digital camera - not nice, but better than
	nothing. If the messages scroll off the top of the console, you
	may find that booting with a higher resolution (eg, ``vga=791``)
	will allow you to read more of the text. (Caveat: This needs ``vesafb``,
	so won't help for 'early' oopses)

	(2) Boot with a serial console (see
	:ref:`Documentation/admin-guide/serial-console.rst <serial_console>`),
	run a null modem to a second machine and capture the output there
	using your favourite communication program. Minicom works well.

	(3) Use Kdump (see Documentation/kdump/kdump.txt),
	extract the kernel ring buffer from old memory with using dmesg
	gdbmacro in Documentation/kdump/gdbmacros.txt.

	Finding the bug's location
	--------------------------

	Reporting a bug works best if you point the location of the bug at the
	Kernel source file. There are two methods for doing that. Usually, using
	``gdb`` is easier, but the Kernel should be pre-compiled with debug info.

	gdb
	^^^

	The GNU debug (``gdb``) is the best way to figure out the exact file and line
	number of the OOPS from the ``vmlinux`` file.

	The usage of gdb works best on a kernel compiled with ``CONFIG_DEBUG_INFO``.
	This can be set by running::

	$ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO

	On a kernel compiled with ``CONFIG_DEBUG_INFO``, you can simply copy the
	EIP value from the OOPS::

	EIP: 0060:[<c021e50e>] Not tainted VLI

	And use GDB to translate that to human-readable form::

	$ gdb vmlinux
	(gdb) l *0xc021e50e

	If you don't have ``CONFIG_DEBUG_INFO`` enabled, you use the function
	offset from the OOPS::

	EIP is at vt_ioctl+0xda8/0x1482

	And recompile the kernel with ``CONFIG_DEBUG_INFO`` enabled::

	$ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO
	$ make vmlinux
	$ gdb vmlinux
	(gdb) l *vt_ioctl+0xda8
	0x1888 is in vt_ioctl (drivers/tty/vt/vt_ioctl.c:293).
	288 {
	289 struct vc_data *vc = NULL;
	290 int ret = 0;
	291
	292 console_lock();
	293 if (VT_BUSY(vc_num))
	294 ret = -EBUSY;
	295 else if (vc_num)
	296 vc = vc_deallocate(vc_num);
	297 console_unlock();

	or, if you want to be more verbose::

	(gdb) p vt_ioctl
	$1 = {int (struct tty_struct *, unsigned int, unsigned long)} 0xae0 <vt_ioctl>
	(gdb) l *0xae0+0xda8

	You could, instead, use the object file::

	$ make drivers/tty/
	$ gdb drivers/tty/vt/vt_ioctl.o
	(gdb) l *vt_ioctl+0xda8

	If you have a call trace, such as::

	Call Trace:
	[<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5
	[<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e
	[<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee
	...

	this shows the problem likely in the :jbd: module. You can load that module
	in gdb and list the relevant code::

	$ gdb fs/jbd/jbd.ko
	(gdb) l *log_wait_commit+0xa3

	.. note::

	You can also do the same for any function call at the stack trace,
	like this one::

	[<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]

	The position where the above call happened can be seen with::

	$ gdb drivers/media/usb/dvb-usb/dvb-usb.o
	(gdb) l *dvb_usb_adapter_frontend_exit+0x3a

	objdump
	^^^^^^^

	To debug a kernel, use objdump and look for the hex offset from the crash
	output to find the valid line of code/assembler. Without debug symbols, you
	will see the assembler code for the routine shown, but if your kernel has
	debug symbols the C code will also be available. (Debug symbols can be enabled
	in the kernel hacking menu of the menu configuration.) For example::

	$ objdump -r -S -l --disassemble net/dccp/ipv4.o

	.. note::

	You need to be at the top level of the kernel tree for this to pick up
	your C files.

	If you don't have access to the code you can also debug on some crash dumps
	e.g. crash dump output as shown by Dave Miller::

	EIP is at +0x14/0x4c0
	...
	Code: 44 24 04 e8 6f 05 00 00 e9 e8 fe ff ff 8d 76 00 8d bc 27 00 00
	00 00 55 57 56 53 81 ec bc 00 00 00 8b ac 24 d0 00 00 00 8b 5d 08
	<8b> 83 3c 01 00 00 89 44 24 14 8b 45 28 85 c0 89 44 24 18 0f 85

	Put the bytes into a "foo.s" file like this:

	.text
	.globl foo
	foo:
	.byte .... /* bytes from Code: part of OOPS dump */

	Compile it with "gcc -c -o foo.o foo.s" then look at the output of
	"objdump --disassemble foo.o".

	Output:

	ip_queue_xmit:
	push %ebp
	push %edi
	push %esi
	push %ebx
	sub $0xbc, %esp
	mov 0xd0(%esp), %ebp ! %ebp = arg0 (skb)
	mov 0x8(%ebp), %ebx ! %ebx = skb->sk
	mov 0x13c(%ebx), %eax ! %eax = inet_sk(sk)->opt

	Reporting the bug
	-----------------

	Once you find where the bug happened, by inspecting its location,
	you could either try to fix it yourself or report it upstream.

	In order to report it upstream, you should identify the mailing list
	used for the development of the affected code. This can be done by using
	the ``get_maintainer.pl`` script.

	For example, if you find a bug at the gspca's conex.c file, you can get
	their maintainers with::

	$ ./scripts/get_maintainer.pl -f drivers/media/usb/gspca/sonixj.c
	Hans Verkuil <hverkuil@xs4all.nl> (odd fixer:GSPCA USB WEBCAM DRIVER,commit_signer:1/1=100%)
	Mauro Carvalho Chehab <mchehab@kernel.org> (maintainer:MEDIA INPUT INFRASTRUCTURE (V4L/DVB),commit_signer:1/1=100%)
	Tejun Heo <tj@kernel.org> (commit_signer:1/1=100%)
	Bhaktipriya Shridhar <bhaktipriya96@gmail.com> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%,removed_lines:9/9=100%)
	linux-media@vger.kernel.org (open list:GSPCA USB WEBCAM DRIVER)
	linux-kernel@vger.kernel.org (open list)

	Please notice that it will point to:

	- The last developers that touched on the source code. On the above example,
	Tejun and Bhaktipriya (in this specific case, none really envolved on the
	development of this file);
	- The driver maintainer (Hans Verkuil);
	- The subsystem maintainer (Mauro Carvalho Chehab)
	- The driver and/or subsystem mailing list (linux-media@vger.kernel.org);
	- the Linux Kernel mailing list (linux-kernel@vger.kernel.org).

	Usually, the fastest way to have your bug fixed is to report it to mailing
	list used for the development of the code (linux-media ML) copying the driver maintainer (Hans).

	If you are totally stumped as to whom to send the report, and
	``get_maintainer.pl`` didn't provide you anything useful, send it to
	linux-kernel@vger.kernel.org.

	Thanks for your help in making Linux as stable as humanly possible.

	Fixing the bug
	--------------

	If you know programming, you could help us by not only reporting the bug,
	but also providing us with a solution. After all open source is about
	sharing what you do and don't you want to be recognised for your genius?

	If you decide to take this way, once you have worked out a fix please submit
	it upstream.

	Please do read
	ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though
	to help your code get accepted.


	---------------------------------------------------------------------------

	Notes on Oops tracing with ``klogd``
	------------------------------------

	In order to help Linus and the other kernel developers there has been
	substantial support incorporated into ``klogd`` for processing protection
	faults. In order to have full support for address resolution at least
	version 1.3-pl3 of the ``sysklogd`` package should be used.

	When a protection fault occurs the ``klogd`` daemon automatically
	translates important addresses in the kernel log messages to their
	symbolic equivalents. This translated kernel message is then
	forwarded through whatever reporting mechanism ``klogd`` is using. The
	protection fault message can be simply cut out of the message files
	and forwarded to the kernel developers.

	Two types of address resolution are performed by ``klogd``. The first is
	static translation and the second is dynamic translation. Static
	translation uses the System.map file in much the same manner that
	ksymoops does. In order to do static translation the ``klogd`` daemon
	must be able to find a system map file at daemon initialization time.
	See the klogd man page for information on how ``klogd`` searches for map
	files.

	Dynamic address translation is important when kernel loadable modules
	are being used. Since memory for kernel modules is allocated from the
	kernel's dynamic memory pools there are no fixed locations for either
	the start of the module or for functions and symbols in the module.

	The kernel supports system calls which allow a program to determine
	which modules are loaded and their location in memory. Using these
	system calls the klogd daemon builds a symbol table which can be used
	to debug a protection fault which occurs in a loadable kernel module.

	At the very minimum klogd will provide the name of the module which
	generated the protection fault. There may be additional symbolic
	information available if the developer of the loadable module chose to
	export symbol information from the module.

	Since the kernel module environment can be dynamic there must be a
	mechanism for notifying the ``klogd`` daemon when a change in module
	environment occurs. There are command line options available which
	allow klogd to signal the currently executing daemon that symbol
	information should be refreshed. See the ``klogd`` manual page for more
	information.

	A patch is included with the sysklogd distribution which modifies the
	``modules-2.0.0`` package to automatically signal klogd whenever a module
	is loaded or unloaded. Applying this patch provides essentially
	seamless support for debugging protection faults which occur with
	kernel loadable modules.

	The following is an example of a protection fault in a loadable module
	processed by ``klogd``::

	Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc
	Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000
	Aug 29 09:51:01 blizard kernel: *pde = 00000000
	Aug 29 09:51:01 blizard kernel: Oops: 0002
	Aug 29 09:51:01 blizard kernel: CPU: 0
	Aug 29 09:51:01 blizard kernel: EIP: 0010:[oops:_oops+16/3868]
	Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212
	Aug 29 09:51:01 blizard kernel: eax: 315e97cc ebx: 003a6f80 ecx: 001be77b edx: 00237c0c
	Aug 29 09:51:01 blizard kernel: esi: 00000000 edi: bffffdb3 ebp: 00589f90 esp: 00589f8c
	Aug 29 09:51:01 blizard kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
	Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000)
	Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001
	Aug 29 09:51:01 blizard kernel: 00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00
	Aug 29 09:51:01 blizard kernel: bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036
	Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128]
	Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3

	---------------------------------------------------------------------------

	::

	Dr. G.W. Wettstein Oncology Research Div. Computing Facility
	Roger Maris Cancer Center INTERNET: greg@wind.rmcc.com
	820 4th St. N.
	Fargo, ND 58122
	Phone: 701-234-7556