| * Hisilicon specific extensions to the Synopsys Designware Mobile |
| Storage Host Controller |
| |
| Read synopsys-dw-mshc.txt for more details |
| |
| The Synopsys designware mobile storage host controller is used to interface |
| a SoC with storage medium such as eMMC or SD/MMC cards. This file documents |
| differences between the core Synopsys dw mshc controller properties described |
| by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific |
| extensions to the Synopsys Designware Mobile Storage Host Controller. |
| |
| Required Properties: |
| |
| * compatible: should be one of the following. |
| - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions. |
| |
| * clock-freq-table: should be the frequency (in Hz) array of the ciu clock |
| in each supported mode. |
| 0. CIU clock rate in Hz for DS mode |
| 1. CIU clock rate in Hz for MMC HS mode |
| 2. CIU clock rate in Hz for SD HS mode |
| 3. CIU clock rate in Hz for SDR12 mode |
| 4. CIU clock rate in Hz for SDR25 mode |
| 5. CIU clock rate in Hz for SDR50 mode |
| 6. CIU clock rate in Hz for SDR104 mode |
| 7. CIU clock rate in Hz for DDR50 mode |
| 8. CIU clock rate in Hz for HS200 mode |
| |
| Example: |
| |
| /* for Hi3620 */ |
| |
| /* SoC portion */ |
| dwmmc_0: dwmmc0@fcd03000 { |
| compatible = "hisilicon,hi4511-dw-mshc"; |
| reg = <0xfcd03000 0x1000>; |
| interrupts = <0 16 4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>; |
| clock-names = "ciu", "biu"; |
| clock-freq-table = |
| <25000000 0 50000000 25000000 50000000 100000000 0 50000000>; |
| }; |
| |
| /* Board portion */ |
| dwmmc0@fcd03000 { |
| num-slots = <1>; |
| vmmc-supply = <&ldo12>; |
| fifo-depth = <0x100>; |
| supports-highspeed; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; |
| slot@0 { |
| reg = <0>; |
| bus-width = <4>; |
| disable-wp; |
| cd-gpios = <&gpio10 3 0>; |
| }; |
| }; |