| /* |
| * FPU support code, moved here from head.S so that it can be used |
| * by chips which use other head-whatever.S files. |
| * |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> |
| * Copyright (C) 1996 Paul Mackerras. |
| * Copyright (C) 1997 Dan Malek (dmalek@jlc.net). |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <asm/reg.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/pgtable.h> |
| #include <asm/cputable.h> |
| #include <asm/cache.h> |
| #include <asm/thread_info.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/ptrace.h> |
| |
| #ifdef CONFIG_VSX |
| #define __REST_32FPVSRS(n,c,base) \ |
| BEGIN_FTR_SECTION \ |
| b 2f; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ |
| REST_32FPRS(n,base); \ |
| b 3f; \ |
| 2: REST_32VSRS(n,c,base); \ |
| 3: |
| |
| #define __SAVE_32FPVSRS(n,c,base) \ |
| BEGIN_FTR_SECTION \ |
| b 2f; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ |
| SAVE_32FPRS(n,base); \ |
| b 3f; \ |
| 2: SAVE_32VSRS(n,c,base); \ |
| 3: |
| #else |
| #define __REST_32FPVSRS(n,b,base) REST_32FPRS(n, base) |
| #define __SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base) |
| #endif |
| #define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base) |
| #define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base) |
| |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| /* void do_load_up_transact_fpu(struct thread_struct *thread) |
| * |
| * This is similar to load_up_fpu but for the transactional version of the FP |
| * register set. It doesn't mess with the task MSR or valid flags. |
| * Furthermore, we don't do lazy FP with TM currently. |
| */ |
| _GLOBAL(do_load_up_transact_fpu) |
| mfmsr r6 |
| ori r5,r6,MSR_FP |
| #ifdef CONFIG_VSX |
| BEGIN_FTR_SECTION |
| oris r5,r5,MSR_VSX@h |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX) |
| #endif |
| SYNC |
| MTMSRD(r5) |
| |
| addi r7,r3,THREAD_TRANSACT_FPSTATE |
| lfd fr0,FPSTATE_FPSCR(r7) |
| MTFSF_L(fr0) |
| REST_32FPVSRS(0, R4, R7) |
| |
| blr |
| #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ |
| |
| /* |
| * Load state from memory into FP registers including FPSCR. |
| * Assumes the caller has enabled FP in the MSR. |
| */ |
| _GLOBAL(load_fp_state) |
| lfd fr0,FPSTATE_FPSCR(r3) |
| MTFSF_L(fr0) |
| REST_32FPVSRS(0, R4, R3) |
| blr |
| |
| /* |
| * Store FP state into memory, including FPSCR |
| * Assumes the caller has enabled FP in the MSR. |
| */ |
| _GLOBAL(store_fp_state) |
| SAVE_32FPVSRS(0, R4, R3) |
| mffs fr0 |
| stfd fr0,FPSTATE_FPSCR(r3) |
| blr |
| |
| /* |
| * This task wants to use the FPU now. |
| * On UP, disable FP for the task which had the FPU previously, |
| * and save its floating-point registers in its thread_struct. |
| * Load up this task's FP registers from its thread_struct, |
| * enable the FPU for the current task and return to the task. |
| * Note that on 32-bit this can only use registers that will be |
| * restored by fast_exception_return, i.e. r3 - r6, r10 and r11. |
| */ |
| _GLOBAL(load_up_fpu) |
| mfmsr r5 |
| ori r5,r5,MSR_FP |
| #ifdef CONFIG_VSX |
| BEGIN_FTR_SECTION |
| oris r5,r5,MSR_VSX@h |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX) |
| #endif |
| SYNC |
| MTMSRD(r5) /* enable use of fpu now */ |
| isync |
| /* enable use of FP after return */ |
| #ifdef CONFIG_PPC32 |
| mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ |
| lwz r4,THREAD_FPEXC_MODE(r5) |
| ori r9,r9,MSR_FP /* enable FP for current */ |
| or r9,r9,r4 |
| #else |
| ld r4,PACACURRENT(r13) |
| addi r5,r4,THREAD /* Get THREAD */ |
| lwz r4,THREAD_FPEXC_MODE(r5) |
| ori r12,r12,MSR_FP |
| or r12,r12,r4 |
| std r12,_MSR(r1) |
| #endif |
| /* Don't care if r4 overflows, this is desired behaviour */ |
| lbz r4,THREAD_LOAD_FP(r5) |
| addi r4,r4,1 |
| stb r4,THREAD_LOAD_FP(r5) |
| addi r10,r5,THREAD_FPSTATE |
| lfd fr0,FPSTATE_FPSCR(r10) |
| MTFSF_L(fr0) |
| REST_32FPVSRS(0, R4, R10) |
| /* restore registers and return */ |
| /* we haven't used ctr or xer or lr */ |
| blr |
| |
| /* |
| * save_fpu(tsk) |
| * Save the floating-point registers in its thread_struct. |
| * Enables the FPU for use in the kernel on return. |
| */ |
| _GLOBAL(save_fpu) |
| addi r3,r3,THREAD /* want THREAD of task */ |
| PPC_LL r6,THREAD_FPSAVEAREA(r3) |
| PPC_LL r5,PT_REGS(r3) |
| PPC_LCMPI 0,r6,0 |
| bne 2f |
| addi r6,r3,THREAD_FPSTATE |
| 2: SAVE_32FPVSRS(0, R4, R6) |
| mffs fr0 |
| stfd fr0,FPSTATE_FPSCR(r6) |
| blr |
| |
| /* |
| * These are used in the alignment trap handler when emulating |
| * single-precision loads and stores. |
| */ |
| |
| _GLOBAL(cvt_fd) |
| lfs 0,0(r3) |
| stfd 0,0(r4) |
| blr |
| |
| _GLOBAL(cvt_df) |
| lfd 0,0(r3) |
| stfs 0,0(r4) |
| blr |