| ============================== |
| UNEVICTABLE LRU INFRASTRUCTURE |
| ============================== |
| |
| ======== |
| CONTENTS |
| ======== |
| |
| (*) The Unevictable LRU |
| |
| - The unevictable page list. |
| - Memory control group interaction. |
| - Marking address spaces unevictable. |
| - Detecting Unevictable Pages. |
| - vmscan's handling of unevictable pages. |
| |
| (*) mlock()'d pages. |
| |
| - History. |
| - Basic management. |
| - mlock()/mlockall() system call handling. |
| - Filtering special vmas. |
| - munlock()/munlockall() system call handling. |
| - Migrating mlocked pages. |
| - Compacting mlocked pages. |
| - mmap(MAP_LOCKED) system call handling. |
| - munmap()/exit()/exec() system call handling. |
| - try_to_unmap(). |
| - try_to_munlock() reverse map scan. |
| - Page reclaim in shrink_*_list(). |
| |
| |
| ============ |
| INTRODUCTION |
| ============ |
| |
| This document describes the Linux memory manager's "Unevictable LRU" |
| infrastructure and the use of this to manage several types of "unevictable" |
| pages. |
| |
| The document attempts to provide the overall rationale behind this mechanism |
| and the rationale for some of the design decisions that drove the |
| implementation. The latter design rationale is discussed in the context of an |
| implementation description. Admittedly, one can obtain the implementation |
| details - the "what does it do?" - by reading the code. One hopes that the |
| descriptions below add value by provide the answer to "why does it do that?". |
| |
| |
| =================== |
| THE UNEVICTABLE LRU |
| =================== |
| |
| The Unevictable LRU facility adds an additional LRU list to track unevictable |
| pages and to hide these pages from vmscan. This mechanism is based on a patch |
| by Larry Woodman of Red Hat to address several scalability problems with page |
| reclaim in Linux. The problems have been observed at customer sites on large |
| memory x86_64 systems. |
| |
| To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of |
| main memory will have over 32 million 4k pages in a single zone. When a large |
| fraction of these pages are not evictable for any reason [see below], vmscan |
| will spend a lot of time scanning the LRU lists looking for the small fraction |
| of pages that are evictable. This can result in a situation where all CPUs are |
| spending 100% of their time in vmscan for hours or days on end, with the system |
| completely unresponsive. |
| |
| The unevictable list addresses the following classes of unevictable pages: |
| |
| (*) Those owned by ramfs. |
| |
| (*) Those mapped into SHM_LOCK'd shared memory regions. |
| |
| (*) Those mapped into VM_LOCKED [mlock()ed] VMAs. |
| |
| The infrastructure may also be able to handle other conditions that make pages |
| unevictable, either by definition or by circumstance, in the future. |
| |
| |
| THE UNEVICTABLE PAGE LIST |
| ------------------------- |
| |
| The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list |
| called the "unevictable" list and an associated page flag, PG_unevictable, to |
| indicate that the page is being managed on the unevictable list. |
| |
| The PG_unevictable flag is analogous to, and mutually exclusive with, the |
| PG_active flag in that it indicates on which LRU list a page resides when |
| PG_lru is set. |
| |
| The Unevictable LRU infrastructure maintains unevictable pages on an additional |
| LRU list for a few reasons: |
| |
| (1) We get to "treat unevictable pages just like we treat other pages in the |
| system - which means we get to use the same code to manipulate them, the |
| same code to isolate them (for migrate, etc.), the same code to keep track |
| of the statistics, etc..." [Rik van Riel] |
| |
| (2) We want to be able to migrate unevictable pages between nodes for memory |
| defragmentation, workload management and memory hotplug. The linux kernel |
| can only migrate pages that it can successfully isolate from the LRU |
| lists. If we were to maintain pages elsewhere than on an LRU-like list, |
| where they can be found by isolate_lru_page(), we would prevent their |
| migration, unless we reworked migration code to find the unevictable pages |
| itself. |
| |
| |
| The unevictable list does not differentiate between file-backed and anonymous, |
| swap-backed pages. This differentiation is only important while the pages are, |
| in fact, evictable. |
| |
| The unevictable list benefits from the "arrayification" of the per-zone LRU |
| lists and statistics originally proposed and posted by Christoph Lameter. |
| |
| The unevictable list does not use the LRU pagevec mechanism. Rather, |
| unevictable pages are placed directly on the page's zone's unevictable list |
| under the zone lru_lock. This allows us to prevent the stranding of pages on |
| the unevictable list when one task has the page isolated from the LRU and other |
| tasks are changing the "evictability" state of the page. |
| |
| |
| MEMORY CONTROL GROUP INTERACTION |
| -------------------------------- |
| |
| The unevictable LRU facility interacts with the memory control group [aka |
| memory controller; see Documentation/cgroups/memory.txt] by extending the |
| lru_list enum. |
| |
| The memory controller data structure automatically gets a per-zone unevictable |
| list as a result of the "arrayification" of the per-zone LRU lists (one per |
| lru_list enum element). The memory controller tracks the movement of pages to |
| and from the unevictable list. |
| |
| When a memory control group comes under memory pressure, the controller will |
| not attempt to reclaim pages on the unevictable list. This has a couple of |
| effects: |
| |
| (1) Because the pages are "hidden" from reclaim on the unevictable list, the |
| reclaim process can be more efficient, dealing only with pages that have a |
| chance of being reclaimed. |
| |
| (2) On the other hand, if too many of the pages charged to the control group |
| are unevictable, the evictable portion of the working set of the tasks in |
| the control group may not fit into the available memory. This can cause |
| the control group to thrash or to OOM-kill tasks. |
| |
| |
| MARKING ADDRESS SPACES UNEVICTABLE |
| ---------------------------------- |
| |
| For facilities such as ramfs none of the pages attached to the address space |
| may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE |
| address space flag is provided, and this can be manipulated by a filesystem |
| using a number of wrapper functions: |
| |
| (*) void mapping_set_unevictable(struct address_space *mapping); |
| |
| Mark the address space as being completely unevictable. |
| |
| (*) void mapping_clear_unevictable(struct address_space *mapping); |
| |
| Mark the address space as being evictable. |
| |
| (*) int mapping_unevictable(struct address_space *mapping); |
| |
| Query the address space, and return true if it is completely |
| unevictable. |
| |
| These are currently used in two places in the kernel: |
| |
| (1) By ramfs to mark the address spaces of its inodes when they are created, |
| and this mark remains for the life of the inode. |
| |
| (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called. |
| |
| Note that SHM_LOCK is not required to page in the locked pages if they're |
| swapped out; the application must touch the pages manually if it wants to |
| ensure they're in memory. |
| |
| |
| DETECTING UNEVICTABLE PAGES |
| --------------------------- |
| |
| The function page_evictable() in vmscan.c determines whether a page is |
| evictable or not using the query function outlined above [see section "Marking |
| address spaces unevictable"] to check the AS_UNEVICTABLE flag. |
| |
| For address spaces that are so marked after being populated (as SHM regions |
| might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate |
| the page tables for the region as does, for example, mlock(), nor need it make |
| any special effort to push any pages in the SHM_LOCK'd area to the unevictable |
| list. Instead, vmscan will do this if and when it encounters the pages during |
| a reclamation scan. |
| |
| On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan |
| the pages in the region and "rescue" them from the unevictable list if no other |
| condition is keeping them unevictable. If an unevictable region is destroyed, |
| the pages are also "rescued" from the unevictable list in the process of |
| freeing them. |
| |
| page_evictable() also checks for mlocked pages by testing an additional page |
| flag, PG_mlocked (as wrapped by PageMlocked()), which is set when a page is |
| faulted into a VM_LOCKED vma, or found in a vma being VM_LOCKED. |
| |
| |
| VMSCAN'S HANDLING OF UNEVICTABLE PAGES |
| -------------------------------------- |
| |
| If unevictable pages are culled in the fault path, or moved to the unevictable |
| list at mlock() or mmap() time, vmscan will not encounter the pages until they |
| have become evictable again (via munlock() for example) and have been "rescued" |
| from the unevictable list. However, there may be situations where we decide, |
| for the sake of expediency, to leave a unevictable page on one of the regular |
| active/inactive LRU lists for vmscan to deal with. vmscan checks for such |
| pages in all of the shrink_{active|inactive|page}_list() functions and will |
| "cull" such pages that it encounters: that is, it diverts those pages to the |
| unevictable list for the zone being scanned. |
| |
| There may be situations where a page is mapped into a VM_LOCKED VMA, but the |
| page is not marked as PG_mlocked. Such pages will make it all the way to |
| shrink_page_list() where they will be detected when vmscan walks the reverse |
| map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, |
| shrink_page_list() will cull the page at that point. |
| |
| To "cull" an unevictable page, vmscan simply puts the page back on the LRU list |
| using putback_lru_page() - the inverse operation to isolate_lru_page() - after |
| dropping the page lock. Because the condition which makes the page unevictable |
| may change once the page is unlocked, putback_lru_page() will recheck the |
| unevictable state of a page that it places on the unevictable list. If the |
| page has become unevictable, putback_lru_page() removes it from the list and |
| retries, including the page_unevictable() test. Because such a race is a rare |
| event and movement of pages onto the unevictable list should be rare, these |
| extra evictabilty checks should not occur in the majority of calls to |
| putback_lru_page(). |
| |
| |
| ============= |
| MLOCKED PAGES |
| ============= |
| |
| The unevictable page list is also useful for mlock(), in addition to ramfs and |
| SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in |
| NOMMU situations, all mappings are effectively mlocked. |
| |
| |
| HISTORY |
| ------- |
| |
| The "Unevictable mlocked Pages" infrastructure is based on work originally |
| posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU". |
| Nick posted his patch as an alternative to a patch posted by Christoph Lameter |
| to achieve the same objective: hiding mlocked pages from vmscan. |
| |
| In Nick's patch, he used one of the struct page LRU list link fields as a count |
| of VM_LOCKED VMAs that map the page. This use of the link field for a count |
| prevented the management of the pages on an LRU list, and thus mlocked pages |
| were not migratable as isolate_lru_page() could not find them, and the LRU list |
| link field was not available to the migration subsystem. |
| |
| Nick resolved this by putting mlocked pages back on the lru list before |
| attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When |
| Nick's patch was integrated with the Unevictable LRU work, the count was |
| replaced by walking the reverse map to determine whether any VM_LOCKED VMAs |
| mapped the page. More on this below. |
| |
| |
| BASIC MANAGEMENT |
| ---------------- |
| |
| mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable |
| pages. When such a page has been "noticed" by the memory management subsystem, |
| the page is marked with the PG_mlocked flag. This can be manipulated using the |
| PageMlocked() functions. |
| |
| A PG_mlocked page will be placed on the unevictable list when it is added to |
| the LRU. Such pages can be "noticed" by memory management in several places: |
| |
| (1) in the mlock()/mlockall() system call handlers; |
| |
| (2) in the mmap() system call handler when mmapping a region with the |
| MAP_LOCKED flag; |
| |
| (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE |
| flag |
| |
| (4) in the fault path, if mlocked pages are "culled" in the fault path, |
| and when a VM_LOCKED stack segment is expanded; or |
| |
| (5) as mentioned above, in vmscan:shrink_page_list() when attempting to |
| reclaim a page in a VM_LOCKED VMA via try_to_unmap() |
| |
| all of which result in the VM_LOCKED flag being set for the VMA if it doesn't |
| already have it set. |
| |
| mlocked pages become unlocked and rescued from the unevictable list when: |
| |
| (1) mapped in a range unlocked via the munlock()/munlockall() system calls; |
| |
| (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including |
| unmapping at task exit; |
| |
| (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file; |
| or |
| |
| (4) before a page is COW'd in a VM_LOCKED VMA. |
| |
| |
| mlock()/mlockall() SYSTEM CALL HANDLING |
| --------------------------------------- |
| |
| Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup() |
| for each VMA in the range specified by the call. In the case of mlockall(), |
| this is the entire active address space of the task. Note that mlock_fixup() |
| is used for both mlocking and munlocking a range of memory. A call to mlock() |
| an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is |
| treated as a no-op, and mlock_fixup() simply returns. |
| |
| If the VMA passes some filtering as described in "Filtering Special Vmas" |
| below, mlock_fixup() will attempt to merge the VMA with its neighbors or split |
| off a subset of the VMA if the range does not cover the entire VMA. Once the |
| VMA has been merged or split or neither, mlock_fixup() will call |
| populate_vma_page_range() to fault in the pages via get_user_pages() and to |
| mark the pages as mlocked via mlock_vma_page(). |
| |
| Note that the VMA being mlocked might be mapped with PROT_NONE. In this case, |
| get_user_pages() will be unable to fault in the pages. That's okay. If pages |
| do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the |
| fault path or in vmscan. |
| |
| Also note that a page returned by get_user_pages() could be truncated or |
| migrated out from under us, while we're trying to mlock it. To detect this, |
| populate_vma_page_range() checks page_mapping() after acquiring the page lock. |
| If the page is still associated with its mapping, we'll go ahead and call |
| mlock_vma_page(). If the mapping is gone, we just unlock the page and move on. |
| In the worst case, this will result in a page mapped in a VM_LOCKED VMA |
| remaining on a normal LRU list without being PageMlocked(). Again, vmscan will |
| detect and cull such pages. |
| |
| mlock_vma_page() will call TestSetPageMlocked() for each page returned by |
| get_user_pages(). We use TestSetPageMlocked() because the page might already |
| be mlocked by another task/VMA and we don't want to do extra work. We |
| especially do not want to count an mlocked page more than once in the |
| statistics. If the page was already mlocked, mlock_vma_page() need do nothing |
| more. |
| |
| If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the |
| page from the LRU, as it is likely on the appropriate active or inactive list |
| at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put |
| back the page - by calling putback_lru_page() - which will notice that the page |
| is now mlocked and divert the page to the zone's unevictable list. If |
| mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle |
| it later if and when it attempts to reclaim the page. |
| |
| |
| FILTERING SPECIAL VMAS |
| ---------------------- |
| |
| mlock_fixup() filters several classes of "special" VMAs: |
| |
| 1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind |
| these mappings are inherently pinned, so we don't need to mark them as |
| mlocked. In any case, most of the pages have no struct page in which to so |
| mark the page. Because of this, get_user_pages() will fail for these VMAs, |
| so there is no sense in attempting to visit them. |
| |
| 2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We |
| neither need nor want to mlock() these pages. However, to preserve the |
| prior behavior of mlock() - before the unevictable/mlock changes - |
| mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to |
| allocate the huge pages and populate the ptes. |
| |
| 3) VMAs with VM_DONTEXPAND are generally userspace mappings of kernel pages, |
| such as the VDSO page, relay channel pages, etc. These pages |
| are inherently unevictable and are not managed on the LRU lists. |
| mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls |
| make_pages_present() to populate the ptes. |
| |
| Note that for all of these special VMAs, mlock_fixup() does not set the |
| VM_LOCKED flag. Therefore, we won't have to deal with them later during |
| munlock(), munmap() or task exit. Neither does mlock_fixup() account these |
| VMAs against the task's "locked_vm". |
| |
| |
| munlock()/munlockall() SYSTEM CALL HANDLING |
| ------------------------------------------- |
| |
| The munlock() and munlockall() system calls are handled by the same functions - |
| do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs |
| lock operation indicated by an argument. So, these system calls are also |
| handled by mlock_fixup(). Again, if called for an already munlocked VMA, |
| mlock_fixup() simply returns. Because of the VMA filtering discussed above, |
| VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be |
| ignored for munlock. |
| |
| If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the |
| specified range. The range is then munlocked via the function |
| populate_vma_page_range() - the same function used to mlock a VMA range - |
| passing a flag to indicate that munlock() is being performed. |
| |
| Because the VMA access protections could have been changed to PROT_NONE after |
| faulting in and mlocking pages, get_user_pages() was unreliable for visiting |
| these pages for munlocking. Because we don't want to leave pages mlocked, |
| get_user_pages() was enhanced to accept a flag to ignore the permissions when |
| fetching the pages - all of which should be resident as a result of previous |
| mlocking. |
| |
| For munlock(), populate_vma_page_range() unlocks individual pages by calling |
| munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked |
| flag using TestClearPageMlocked(). As with mlock_vma_page(), |
| munlock_vma_page() use the Test*PageMlocked() function to handle the case where |
| the page might have already been unlocked by another task. If the page was |
| mlocked, munlock_vma_page() updates that zone statistics for the number of |
| mlocked pages. Note, however, that at this point we haven't checked whether |
| the page is mapped by other VM_LOCKED VMAs. |
| |
| We can't call try_to_munlock(), the function that walks the reverse map to |
| check for other VM_LOCKED VMAs, without first isolating the page from the LRU. |
| try_to_munlock() is a variant of try_to_unmap() and thus requires that the page |
| not be on an LRU list [more on these below]. However, the call to |
| isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So, |
| we go ahead and clear PG_mlocked up front, as this might be the only chance we |
| have. If we can successfully isolate the page, we go ahead and |
| try_to_munlock(), which will restore the PG_mlocked flag and update the zone |
| page statistics if it finds another VMA holding the page mlocked. If we fail |
| to isolate the page, we'll have left a potentially mlocked page on the LRU. |
| This is fine, because we'll catch it later if and if vmscan tries to reclaim |
| the page. This should be relatively rare. |
| |
| |
| MIGRATING MLOCKED PAGES |
| ----------------------- |
| |
| A page that is being migrated has been isolated from the LRU lists and is held |
| locked across unmapping of the page, updating the page's address space entry |
| and copying the contents and state, until the page table entry has been |
| replaced with an entry that refers to the new page. Linux supports migration |
| of mlocked pages and other unevictable pages. This involves simply moving the |
| PG_mlocked and PG_unevictable states from the old page to the new page. |
| |
| Note that page migration can race with mlocking or munlocking of the same page. |
| This has been discussed from the mlock/munlock perspective in the respective |
| sections above. Both processes (migration and m[un]locking) hold the page |
| locked. This provides the first level of synchronization. Page migration |
| zeros out the page_mapping of the old page before unlocking it, so m[un]lock |
| can skip these pages by testing the page mapping under page lock. |
| |
| To complete page migration, we place the new and old pages back onto the LRU |
| after dropping the page lock. The "unneeded" page - old page on success, new |
| page on failure - will be freed when the reference count held by the migration |
| process is released. To ensure that we don't strand pages on the unevictable |
| list because of a race between munlock and migration, page migration uses the |
| putback_lru_page() function to add migrated pages back to the LRU. |
| |
| |
| COMPACTING MLOCKED PAGES |
| ------------------------ |
| |
| The unevictable LRU can be scanned for compactable regions and the default |
| behavior is to do so. /proc/sys/vm/compact_unevictable_allowed controls |
| this behavior (see Documentation/sysctl/vm.txt). Once scanning of the |
| unevictable LRU is enabled, the work of compaction is mostly handled by |
| the page migration code and the same work flow as described in MIGRATING |
| MLOCKED PAGES will apply. |
| |
| MLOCKING TRANSPARENT HUGE PAGES |
| ------------------------------- |
| |
| A transparent huge page is represented by a single entry on an LRU list. |
| Therefore, we can only make unevictable an entire compound page, not |
| individual subpages. |
| |
| If a user tries to mlock() part of a huge page, we want the rest of the |
| page to be reclaimable. |
| |
| We cannot just split the page on partial mlock() as split_huge_page() can |
| fail and new intermittent failure mode for the syscall is undesirable. |
| |
| We handle this by keeping PTE-mapped huge pages on normal LRU lists: the |
| PMD on border of VM_LOCKED VMA will be split into PTE table. |
| |
| This way the huge page is accessible for vmscan. Under memory pressure the |
| page will be split, subpages which belong to VM_LOCKED VMAs will be moved |
| to unevictable LRU and the rest can be reclaimed. |
| |
| See also comment in follow_trans_huge_pmd(). |
| |
| mmap(MAP_LOCKED) SYSTEM CALL HANDLING |
| ------------------------------------- |
| |
| In addition the mlock()/mlockall() system calls, an application can request |
| that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap() |
| call. There is one important and subtle difference here, though. mmap() + mlock() |
| will fail if the range cannot be faulted in (e.g. because mm_populate fails) |
| and returns with ENOMEM while mmap(MAP_LOCKED) will not fail. The mmaped |
| area will still have properties of the locked area - aka. pages will not get |
| swapped out - but major page faults to fault memory in might still happen. |
| |
| Furthermore, any mmap() call or brk() call that expands the heap by a |
| task that has previously called mlockall() with the MCL_FUTURE flag will result |
| in the newly mapped memory being mlocked. Before the unevictable/mlock |
| changes, the kernel simply called make_pages_present() to allocate pages and |
| populate the page table. |
| |
| To mlock a range of memory under the unevictable/mlock infrastructure, the |
| mmap() handler and task address space expansion functions call |
| populate_vma_page_range() specifying the vma and the address range to mlock. |
| |
| The callers of populate_vma_page_range() will have already added the memory range |
| to be mlocked to the task's "locked_vm". To account for filtered VMAs, |
| populate_vma_page_range() returns the number of pages NOT mlocked. All of the |
| callers then subtract a non-negative return value from the task's locked_vm. A |
| negative return value represent an error - for example, from get_user_pages() |
| attempting to fault in a VMA with PROT_NONE access. In this case, we leave the |
| memory range accounted as locked_vm, as the protections could be changed later |
| and pages allocated into that region. |
| |
| |
| munmap()/exit()/exec() SYSTEM CALL HANDLING |
| ------------------------------------------- |
| |
| When unmapping an mlocked region of memory, whether by an explicit call to |
| munmap() or via an internal unmap from exit() or exec() processing, we must |
| munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages. |
| Before the unevictable/mlock changes, mlocking did not mark the pages in any |
| way, so unmapping them required no processing. |
| |
| To munlock a range of memory under the unevictable/mlock infrastructure, the |
| munmap() handler and task address space call tear down function |
| munlock_vma_pages_all(). The name reflects the observation that one always |
| specifies the entire VMA range when munlock()ing during unmap of a region. |
| Because of the VMA filtering when mlocking() regions, only "normal" VMAs that |
| actually contain mlocked pages will be passed to munlock_vma_pages_all(). |
| |
| munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup() |
| for the munlock case, calls __munlock_vma_pages_range() to walk the page table |
| for the VMA's memory range and munlock_vma_page() each resident page mapped by |
| the VMA. This effectively munlocks the page, only if this is the last |
| VM_LOCKED VMA that maps the page. |
| |
| |
| try_to_unmap() |
| -------------- |
| |
| Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may |
| have VM_LOCKED flag set. It is possible for a page mapped into one or more |
| VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one |
| of the active or inactive LRU lists. This could happen if, for example, a task |
| in the process of munlocking the page could not isolate the page from the LRU. |
| As a result, vmscan/shrink_page_list() might encounter such a page as described |
| in section "vmscan's handling of unevictable pages". To handle this situation, |
| try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse |
| map. |
| |
| try_to_unmap() is always called, by either vmscan for reclaim or for page |
| migration, with the argument page locked and isolated from the LRU. Separate |
| functions handle anonymous and mapped file and KSM pages, as these types of |
| pages have different reverse map lookup mechanisms, with different locking. |
| In each case, whether rmap_walk_anon() or rmap_walk_file() or rmap_walk_ksm(), |
| it will call try_to_unmap_one() for every VMA which might contain the page. |
| |
| When trying to reclaim, if try_to_unmap_one() finds the page in a VM_LOCKED |
| VMA, it will then mlock the page via mlock_vma_page() instead of unmapping it, |
| and return SWAP_MLOCK to indicate that the page is unevictable: and the scan |
| stops there. |
| |
| mlock_vma_page() is called while holding the page table's lock (in addition |
| to the page lock, and the rmap lock): to serialize against concurrent mlock or |
| munlock or munmap system calls, mm teardown (munlock_vma_pages_all), reclaim, |
| holepunching, and truncation of file pages and their anonymous COWed pages. |
| |
| |
| try_to_munlock() REVERSE MAP SCAN |
| --------------------------------- |
| |
| [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the |
| page_referenced() reverse map walker. |
| |
| When munlock_vma_page() [see section "munlock()/munlockall() System Call |
| Handling" above] tries to munlock a page, it needs to determine whether or not |
| the page is mapped by any VM_LOCKED VMA without actually attempting to unmap |
| all PTEs from the page. For this purpose, the unevictable/mlock infrastructure |
| introduced a variant of try_to_unmap() called try_to_munlock(). |
| |
| try_to_munlock() calls the same functions as try_to_unmap() for anonymous and |
| mapped file and KSM pages with a flag argument specifying unlock versus unmap |
| processing. Again, these functions walk the respective reverse maps looking |
| for VM_LOCKED VMAs. When such a VMA is found, as in the try_to_unmap() case, |
| the functions mlock the page via mlock_vma_page() and return SWAP_MLOCK. This |
| undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page. |
| |
| Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's |
| reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA. |
| However, the scan can terminate when it encounters a VM_LOCKED VMA. |
| Although try_to_munlock() might be called a great many times when munlocking a |
| large region or tearing down a large address space that has been mlocked via |
| mlockall(), overall this is a fairly rare event. |
| |
| |
| PAGE RECLAIM IN shrink_*_list() |
| ------------------------------- |
| |
| shrink_active_list() culls any obviously unevictable pages - i.e. |
| !page_evictable(page) - diverting these to the unevictable list. |
| However, shrink_active_list() only sees unevictable pages that made it onto the |
| active/inactive lru lists. Note that these pages do not have PageUnevictable |
| set - otherwise they would be on the unevictable list and shrink_active_list |
| would never see them. |
| |
| Some examples of these unevictable pages on the LRU lists are: |
| |
| (1) ramfs pages that have been placed on the LRU lists when first allocated. |
| |
| (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to |
| allocate or fault in the pages in the shared memory region. This happens |
| when an application accesses the page the first time after SHM_LOCK'ing |
| the segment. |
| |
| (3) mlocked pages that could not be isolated from the LRU and moved to the |
| unevictable list in mlock_vma_page(). |
| |
| shrink_inactive_list() also diverts any unevictable pages that it finds on the |
| inactive lists to the appropriate zone's unevictable list. |
| |
| shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd |
| after shrink_active_list() had moved them to the inactive list, or pages mapped |
| into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to |
| recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, |
| but will pass on to shrink_page_list(). |
| |
| shrink_page_list() again culls obviously unevictable pages that it could |
| encounter for similar reason to shrink_inactive_list(). Pages mapped into |
| VM_LOCKED VMAs but without PG_mlocked set will make it all the way to |
| try_to_unmap(). shrink_page_list() will divert them to the unevictable list |
| when try_to_unmap() returns SWAP_MLOCK, as discussed above. |