blob: 531931c1b250129508040c2a2c78425827159951 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 * Based on drivers/serial/8250.c by Russell King.
3 *
4 * Author: Nicolas Pitre
5 * Created: Feb 20, 2003
6 * Copyright: (C) 2003 Monta Vista Software, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * Note 1: This driver is made separate from the already too overloaded
14 * 8250.c because it needs some kirks of its own and that'll make it
15 * easier to add DMA support.
16 *
17 * Note 2: I'm too sick of device allocation policies for serial ports.
18 * If someone else wants to request an "official" allocation of major/minor
19 * for this driver please be my guest. And don't forget that new hardware
20 * to come from Intel might have more than 3 or 4 of those UARTs. Let's
21 * hope for a better port registration and dynamic device allocation scheme
22 * with the serial core maintainer satisfaction to appear soon.
23 */
24
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
26#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
27#define SUPPORT_SYSRQ
28#endif
29
30#include <linux/module.h>
31#include <linux/ioport.h>
32#include <linux/init.h>
33#include <linux/console.h>
34#include <linux/sysrq.h>
35#include <linux/serial_reg.h>
36#include <linux/circ_buf.h>
37#include <linux/delay.h>
38#include <linux/interrupt.h>
Russell Kingd052d1b2005-10-29 19:07:23 +010039#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070040#include <linux/tty.h>
41#include <linux/tty_flip.h>
42#include <linux/serial_core.h>
Russell Kingb049bd92007-08-20 10:28:15 +010043#include <linux/clk.h>
Eric Miao290a5582009-01-14 19:12:42 +080044#include <linux/io.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090045#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046
47struct uart_pxa_port {
48 struct uart_port port;
49 unsigned char ier;
50 unsigned char lcr;
51 unsigned char mcr;
52 unsigned int lsr_break_flag;
Russell Kingb049bd92007-08-20 10:28:15 +010053 struct clk *clk;
Linus Torvalds1da177e2005-04-16 15:20:36 -070054 char *name;
55};
56
57static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
58{
59 offset <<= 2;
60 return readl(up->port.membase + offset);
61}
62
63static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
64{
65 offset <<= 2;
66 writel(value, up->port.membase + offset);
67}
68
69static void serial_pxa_enable_ms(struct uart_port *port)
70{
71 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
72
73 up->ier |= UART_IER_MSI;
74 serial_out(up, UART_IER, up->ier);
75}
76
Russell Kingb129a8c2005-08-31 10:12:14 +010077static void serial_pxa_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070078{
79 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
80
81 if (up->ier & UART_IER_THRI) {
82 up->ier &= ~UART_IER_THRI;
83 serial_out(up, UART_IER, up->ier);
84 }
85}
86
87static void serial_pxa_stop_rx(struct uart_port *port)
88{
89 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
90
91 up->ier &= ~UART_IER_RLSI;
92 up->port.read_status_mask &= ~UART_LSR_DR;
93 serial_out(up, UART_IER, up->ier);
94}
95
David Howells7d12e782006-10-05 14:55:46 +010096static inline void receive_chars(struct uart_pxa_port *up, int *status)
Linus Torvalds1da177e2005-04-16 15:20:36 -070097{
Alan Coxebd2c8f2009-09-19 13:13:28 -070098 struct tty_struct *tty = up->port.state->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 unsigned int ch, flag;
100 int max_count = 256;
101
102 do {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 ch = serial_in(up, UART_RX);
104 flag = TTY_NORMAL;
105 up->port.icount.rx++;
106
107 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
108 UART_LSR_FE | UART_LSR_OE))) {
109 /*
110 * For statistics only
111 */
112 if (*status & UART_LSR_BI) {
113 *status &= ~(UART_LSR_FE | UART_LSR_PE);
114 up->port.icount.brk++;
115 /*
116 * We do the SysRQ and SAK checking
117 * here because otherwise the break
118 * may get masked by ignore_status_mask
119 * or read_status_mask.
120 */
121 if (uart_handle_break(&up->port))
122 goto ignore_char;
123 } else if (*status & UART_LSR_PE)
124 up->port.icount.parity++;
125 else if (*status & UART_LSR_FE)
126 up->port.icount.frame++;
127 if (*status & UART_LSR_OE)
128 up->port.icount.overrun++;
129
130 /*
131 * Mask off conditions which should be ignored.
132 */
133 *status &= up->port.read_status_mask;
134
135#ifdef CONFIG_SERIAL_PXA_CONSOLE
136 if (up->port.line == up->port.cons->index) {
137 /* Recover the break flag from console xmit */
138 *status |= up->lsr_break_flag;
139 up->lsr_break_flag = 0;
140 }
141#endif
142 if (*status & UART_LSR_BI) {
143 flag = TTY_BREAK;
144 } else if (*status & UART_LSR_PE)
145 flag = TTY_PARITY;
146 else if (*status & UART_LSR_FE)
147 flag = TTY_FRAME;
148 }
Russell King05ab3012005-05-09 23:21:59 +0100149
David Howells7d12e782006-10-05 14:55:46 +0100150 if (uart_handle_sysrq_char(&up->port, ch))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151 goto ignore_char;
Russell King05ab3012005-05-09 23:21:59 +0100152
153 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
154
Linus Torvalds1da177e2005-04-16 15:20:36 -0700155 ignore_char:
156 *status = serial_in(up, UART_LSR);
157 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
158 tty_flip_buffer_push(tty);
159}
160
161static void transmit_chars(struct uart_pxa_port *up)
162{
Alan Coxebd2c8f2009-09-19 13:13:28 -0700163 struct circ_buf *xmit = &up->port.state->xmit;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 int count;
165
166 if (up->port.x_char) {
167 serial_out(up, UART_TX, up->port.x_char);
168 up->port.icount.tx++;
169 up->port.x_char = 0;
170 return;
171 }
172 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100173 serial_pxa_stop_tx(&up->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174 return;
175 }
176
177 count = up->port.fifosize / 2;
178 do {
179 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
180 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
181 up->port.icount.tx++;
182 if (uart_circ_empty(xmit))
183 break;
184 } while (--count > 0);
185
186 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
187 uart_write_wakeup(&up->port);
188
189
190 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100191 serial_pxa_stop_tx(&up->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192}
193
Russell Kingb129a8c2005-08-31 10:12:14 +0100194static void serial_pxa_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700195{
196 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
197
198 if (!(up->ier & UART_IER_THRI)) {
199 up->ier |= UART_IER_THRI;
200 serial_out(up, UART_IER, up->ier);
201 }
202}
203
204static inline void check_modem_status(struct uart_pxa_port *up)
205{
206 int status;
207
208 status = serial_in(up, UART_MSR);
209
210 if ((status & UART_MSR_ANY_DELTA) == 0)
211 return;
212
213 if (status & UART_MSR_TERI)
214 up->port.icount.rng++;
215 if (status & UART_MSR_DDSR)
216 up->port.icount.dsr++;
217 if (status & UART_MSR_DDCD)
218 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
219 if (status & UART_MSR_DCTS)
220 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
221
Alan Coxbdc04e32009-09-19 13:13:31 -0700222 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223}
224
225/*
226 * This handles the interrupt from one port.
227 */
David Howells7d12e782006-10-05 14:55:46 +0100228static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229{
Jeff Garzikc7bec5a2006-10-06 15:00:58 -0400230 struct uart_pxa_port *up = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 unsigned int iir, lsr;
232
233 iir = serial_in(up, UART_IIR);
234 if (iir & UART_IIR_NO_INT)
235 return IRQ_NONE;
236 lsr = serial_in(up, UART_LSR);
237 if (lsr & UART_LSR_DR)
David Howells7d12e782006-10-05 14:55:46 +0100238 receive_chars(up, &lsr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239 check_modem_status(up);
240 if (lsr & UART_LSR_THRE)
241 transmit_chars(up);
242 return IRQ_HANDLED;
243}
244
245static unsigned int serial_pxa_tx_empty(struct uart_port *port)
246{
247 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
248 unsigned long flags;
249 unsigned int ret;
250
251 spin_lock_irqsave(&up->port.lock, flags);
252 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
253 spin_unlock_irqrestore(&up->port.lock, flags);
254
255 return ret;
256}
257
258static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
259{
260 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 unsigned char status;
262 unsigned int ret;
263
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 status = serial_in(up, UART_MSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265
266 ret = 0;
267 if (status & UART_MSR_DCD)
268 ret |= TIOCM_CAR;
269 if (status & UART_MSR_RI)
270 ret |= TIOCM_RNG;
271 if (status & UART_MSR_DSR)
272 ret |= TIOCM_DSR;
273 if (status & UART_MSR_CTS)
274 ret |= TIOCM_CTS;
275 return ret;
276}
277
278static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
279{
280 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
281 unsigned char mcr = 0;
282
283 if (mctrl & TIOCM_RTS)
284 mcr |= UART_MCR_RTS;
285 if (mctrl & TIOCM_DTR)
286 mcr |= UART_MCR_DTR;
287 if (mctrl & TIOCM_OUT1)
288 mcr |= UART_MCR_OUT1;
289 if (mctrl & TIOCM_OUT2)
290 mcr |= UART_MCR_OUT2;
291 if (mctrl & TIOCM_LOOP)
292 mcr |= UART_MCR_LOOP;
293
294 mcr |= up->mcr;
295
296 serial_out(up, UART_MCR, mcr);
297}
298
299static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
300{
301 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
302 unsigned long flags;
303
304 spin_lock_irqsave(&up->port.lock, flags);
305 if (break_state == -1)
306 up->lcr |= UART_LCR_SBC;
307 else
308 up->lcr &= ~UART_LCR_SBC;
309 serial_out(up, UART_LCR, up->lcr);
310 spin_unlock_irqrestore(&up->port.lock, flags);
311}
312
313#if 0
314static void serial_pxa_dma_init(struct pxa_uart *up)
315{
316 up->rxdma =
317 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
318 if (up->rxdma < 0)
319 goto out;
320 up->txdma =
321 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
322 if (up->txdma < 0)
323 goto err_txdma;
324 up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
325 if (!up->dmadesc)
326 goto err_alloc;
327
328 /* ... */
329err_alloc:
330 pxa_free_dma(up->txdma);
331err_rxdma:
332 pxa_free_dma(up->rxdma);
333out:
334 return;
335}
336#endif
337
338static int serial_pxa_startup(struct uart_port *port)
339{
340 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
341 unsigned long flags;
342 int retval;
343
Matt Reimerd9e29642005-10-28 16:25:02 +0100344 if (port->line == 3) /* HWUART */
345 up->mcr |= UART_MCR_AFE;
346 else
Erik Hovlandf02aa3f2005-12-30 15:57:35 +0000347 up->mcr = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348
Russell Kingb049bd92007-08-20 10:28:15 +0100349 up->port.uartclk = clk_get_rate(up->clk);
350
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 /*
352 * Allocate the IRQ
353 */
354 retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
355 if (retval)
356 return retval;
357
358 /*
359 * Clear the FIFO buffers and disable them.
360 * (they will be reenabled in set_termios())
361 */
362 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
363 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
364 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
365 serial_out(up, UART_FCR, 0);
366
367 /*
368 * Clear the interrupt registers.
369 */
370 (void) serial_in(up, UART_LSR);
371 (void) serial_in(up, UART_RX);
372 (void) serial_in(up, UART_IIR);
373 (void) serial_in(up, UART_MSR);
374
375 /*
376 * Now, initialize the UART
377 */
378 serial_out(up, UART_LCR, UART_LCR_WLEN8);
379
380 spin_lock_irqsave(&up->port.lock, flags);
381 up->port.mctrl |= TIOCM_OUT2;
382 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
383 spin_unlock_irqrestore(&up->port.lock, flags);
384
385 /*
386 * Finally, enable interrupts. Note: Modem status interrupts
Adrian Bunk80f72282006-06-30 18:27:16 +0200387 * are set via set_termios(), which will be occurring imminently
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 * anyway, so we don't enable them here.
389 */
390 up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
391 serial_out(up, UART_IER, up->ier);
392
393 /*
394 * And clear the interrupt registers again for luck.
395 */
396 (void) serial_in(up, UART_LSR);
397 (void) serial_in(up, UART_RX);
398 (void) serial_in(up, UART_IIR);
399 (void) serial_in(up, UART_MSR);
400
401 return 0;
402}
403
404static void serial_pxa_shutdown(struct uart_port *port)
405{
406 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
407 unsigned long flags;
408
409 free_irq(up->port.irq, up);
410
411 /*
412 * Disable interrupts from this port
413 */
414 up->ier = 0;
415 serial_out(up, UART_IER, 0);
416
417 spin_lock_irqsave(&up->port.lock, flags);
418 up->port.mctrl &= ~TIOCM_OUT2;
419 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
420 spin_unlock_irqrestore(&up->port.lock, flags);
421
422 /*
423 * Disable break condition and FIFOs
424 */
425 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
426 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
427 UART_FCR_CLEAR_RCVR |
428 UART_FCR_CLEAR_XMIT);
429 serial_out(up, UART_FCR, 0);
430}
431
432static void
Alan Cox606d0992006-12-08 02:38:45 -0800433serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
434 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435{
436 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
437 unsigned char cval, fcr = 0;
438 unsigned long flags;
439 unsigned int baud, quot;
Uwe Kleine-Königc9348782009-11-06 21:40:46 +0100440 unsigned int dll;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700441
442 switch (termios->c_cflag & CSIZE) {
443 case CS5:
Russell King0a8b80c52005-06-24 19:48:22 +0100444 cval = UART_LCR_WLEN5;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445 break;
446 case CS6:
Russell King0a8b80c52005-06-24 19:48:22 +0100447 cval = UART_LCR_WLEN6;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448 break;
449 case CS7:
Russell King0a8b80c52005-06-24 19:48:22 +0100450 cval = UART_LCR_WLEN7;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 break;
452 default:
453 case CS8:
Russell King0a8b80c52005-06-24 19:48:22 +0100454 cval = UART_LCR_WLEN8;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700455 break;
456 }
457
458 if (termios->c_cflag & CSTOPB)
Russell King0a8b80c52005-06-24 19:48:22 +0100459 cval |= UART_LCR_STOP;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460 if (termios->c_cflag & PARENB)
461 cval |= UART_LCR_PARITY;
462 if (!(termios->c_cflag & PARODD))
463 cval |= UART_LCR_EPAR;
464
465 /*
466 * Ask the core to calculate the divisor for us.
467 */
468 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
469 quot = uart_get_divisor(port, baud);
470
471 if ((up->port.uartclk / quot) < (2400 * 16))
472 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
Matt Reimerd9e29642005-10-28 16:25:02 +0100473 else if ((up->port.uartclk / quot) < (230400 * 16))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
Matt Reimerd9e29642005-10-28 16:25:02 +0100475 else
476 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477
478 /*
479 * Ok, we're now changing the port state. Do it with
480 * interrupts disabled.
481 */
482 spin_lock_irqsave(&up->port.lock, flags);
483
484 /*
485 * Ensure the port will be enabled.
486 * This is required especially for serial console.
487 */
Eric Miao290a5582009-01-14 19:12:42 +0800488 up->ier |= UART_IER_UUE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489
490 /*
491 * Update the per-port timeout.
492 */
Lothar Wassmanne6158b42005-10-12 19:58:11 +0100493 uart_update_timeout(port, termios->c_cflag, baud);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494
495 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
496 if (termios->c_iflag & INPCK)
497 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
498 if (termios->c_iflag & (BRKINT | PARMRK))
499 up->port.read_status_mask |= UART_LSR_BI;
500
501 /*
502 * Characters to ignore
503 */
504 up->port.ignore_status_mask = 0;
505 if (termios->c_iflag & IGNPAR)
506 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
507 if (termios->c_iflag & IGNBRK) {
508 up->port.ignore_status_mask |= UART_LSR_BI;
509 /*
510 * If we're ignoring parity and break indicators,
511 * ignore overruns too (for real raw support).
512 */
513 if (termios->c_iflag & IGNPAR)
514 up->port.ignore_status_mask |= UART_LSR_OE;
515 }
516
517 /*
518 * ignore all characters if CREAD is not set
519 */
520 if ((termios->c_cflag & CREAD) == 0)
521 up->port.ignore_status_mask |= UART_LSR_DR;
522
523 /*
524 * CTS flow control flag and modem status interrupts
525 */
526 up->ier &= ~UART_IER_MSI;
527 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
528 up->ier |= UART_IER_MSI;
529
530 serial_out(up, UART_IER, up->ier);
531
Robert Jarzmik2276f032008-09-06 23:01:32 +0100532 if (termios->c_cflag & CRTSCTS)
533 up->mcr |= UART_MCR_AFE;
534 else
535 up->mcr &= ~UART_MCR_AFE;
536
Uwe Kleine-Königc9348782009-11-06 21:40:46 +0100537 serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700538 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
Uwe Kleine-Königc9348782009-11-06 21:40:46 +0100539
540 /*
541 * work around Errata #75 according to Intel(R) PXA27x Processor Family
542 * Specification Update (Nov 2005)
543 */
544 dll = serial_in(up, UART_DLL);
545 WARN_ON(dll != (quot & 0xff));
546
Linus Torvalds1da177e2005-04-16 15:20:36 -0700547 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
Uwe Kleine-Königc9348782009-11-06 21:40:46 +0100548 serial_out(up, UART_LCR, cval); /* reset DLAB */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 up->lcr = cval; /* Save LCR */
550 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
551 serial_out(up, UART_FCR, fcr);
552 spin_unlock_irqrestore(&up->port.lock, flags);
553}
554
555static void
556serial_pxa_pm(struct uart_port *port, unsigned int state,
557 unsigned int oldstate)
558{
559 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
Russell Kingb049bd92007-08-20 10:28:15 +0100560
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 if (!state)
Russell Kingb049bd92007-08-20 10:28:15 +0100562 clk_enable(up->clk);
563 else
564 clk_disable(up->clk);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565}
566
567static void serial_pxa_release_port(struct uart_port *port)
568{
569}
570
571static int serial_pxa_request_port(struct uart_port *port)
572{
573 return 0;
574}
575
576static void serial_pxa_config_port(struct uart_port *port, int flags)
577{
578 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
579 up->port.type = PORT_PXA;
580}
581
582static int
583serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
584{
585 /* we don't want the core code to modify any port params */
586 return -EINVAL;
587}
588
589static const char *
590serial_pxa_type(struct uart_port *port)
591{
592 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
593 return up->name;
594}
595
Russell Kinge259a3a2007-08-20 09:47:41 +0100596static struct uart_pxa_port *serial_pxa_ports[4];
Vincent Sanders2d934862005-09-14 22:36:03 +0100597static struct uart_driver serial_pxa_reg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700598
Philipp Zabelfa7f1512007-11-22 17:52:47 +0100599#ifdef CONFIG_SERIAL_PXA_CONSOLE
600
Linus Torvalds1da177e2005-04-16 15:20:36 -0700601#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
602
603/*
604 * Wait for transmitter & holding register to empty
605 */
606static inline void wait_for_xmitr(struct uart_pxa_port *up)
607{
608 unsigned int status, tmout = 10000;
609
610 /* Wait up to 10ms for the character(s) to be sent. */
611 do {
612 status = serial_in(up, UART_LSR);
613
614 if (status & UART_LSR_BI)
615 up->lsr_break_flag = UART_LSR_BI;
616
617 if (--tmout == 0)
618 break;
619 udelay(1);
620 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
621
622 /* Wait up to 1s for flow control if necessary */
623 if (up->port.flags & UPF_CONS_FLOW) {
624 tmout = 1000000;
625 while (--tmout &&
626 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
627 udelay(1);
628 }
629}
630
Russell Kingd3587882006-03-20 20:00:09 +0000631static void serial_pxa_console_putchar(struct uart_port *port, int ch)
632{
633 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
634
635 wait_for_xmitr(up);
636 serial_out(up, UART_TX, ch);
637}
638
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639/*
640 * Print a string to the serial port trying not to disturb
641 * any possible real use of the port...
642 *
643 * The console_lock must be held when we get here.
644 */
645static void
646serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
647{
Russell Kinge259a3a2007-08-20 09:47:41 +0100648 struct uart_pxa_port *up = serial_pxa_ports[co->index];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649 unsigned int ier;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650
Russell Kingb049bd92007-08-20 10:28:15 +0100651 clk_enable(up->clk);
652
Linus Torvalds1da177e2005-04-16 15:20:36 -0700653 /*
Erik Hovlandf02aa3f2005-12-30 15:57:35 +0000654 * First save the IER then disable the interrupts
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655 */
656 ier = serial_in(up, UART_IER);
657 serial_out(up, UART_IER, UART_IER_UUE);
658
Russell Kingd3587882006-03-20 20:00:09 +0000659 uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660
661 /*
662 * Finally, wait for transmitter to become empty
663 * and restore the IER
664 */
665 wait_for_xmitr(up);
666 serial_out(up, UART_IER, ier);
Russell Kingb049bd92007-08-20 10:28:15 +0100667
668 clk_disable(up->clk);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669}
670
671static int __init
672serial_pxa_console_setup(struct console *co, char *options)
673{
674 struct uart_pxa_port *up;
675 int baud = 9600;
676 int bits = 8;
677 int parity = 'n';
678 int flow = 'n';
679
680 if (co->index == -1 || co->index >= serial_pxa_reg.nr)
681 co->index = 0;
Russell Kinge259a3a2007-08-20 09:47:41 +0100682 up = serial_pxa_ports[co->index];
683 if (!up)
684 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685
686 if (options)
687 uart_parse_options(options, &baud, &parity, &bits, &flow);
688
689 return uart_set_options(&up->port, co, baud, parity, bits, flow);
690}
691
692static struct console serial_pxa_console = {
693 .name = "ttyS",
694 .write = serial_pxa_console_write,
695 .device = uart_console_device,
696 .setup = serial_pxa_console_setup,
697 .flags = CON_PRINTBUFFER,
698 .index = -1,
699 .data = &serial_pxa_reg,
700};
701
Linus Torvalds1da177e2005-04-16 15:20:36 -0700702#define PXA_CONSOLE &serial_pxa_console
703#else
704#define PXA_CONSOLE NULL
705#endif
706
707struct uart_ops serial_pxa_pops = {
708 .tx_empty = serial_pxa_tx_empty,
709 .set_mctrl = serial_pxa_set_mctrl,
710 .get_mctrl = serial_pxa_get_mctrl,
711 .stop_tx = serial_pxa_stop_tx,
712 .start_tx = serial_pxa_start_tx,
713 .stop_rx = serial_pxa_stop_rx,
714 .enable_ms = serial_pxa_enable_ms,
715 .break_ctl = serial_pxa_break_ctl,
716 .startup = serial_pxa_startup,
717 .shutdown = serial_pxa_shutdown,
718 .set_termios = serial_pxa_set_termios,
719 .pm = serial_pxa_pm,
720 .type = serial_pxa_type,
721 .release_port = serial_pxa_release_port,
722 .request_port = serial_pxa_request_port,
723 .config_port = serial_pxa_config_port,
724 .verify_port = serial_pxa_verify_port,
725};
726
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727static struct uart_driver serial_pxa_reg = {
728 .owner = THIS_MODULE,
729 .driver_name = "PXA serial",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730 .dev_name = "ttyS",
731 .major = TTY_MAJOR,
732 .minor = 64,
Russell Kinge259a3a2007-08-20 09:47:41 +0100733 .nr = 4,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734 .cons = PXA_CONSOLE,
735};
736
Mike Rapoportbf56c752009-07-21 17:48:43 +0300737#ifdef CONFIG_PM
738static int serial_pxa_suspend(struct device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700739{
Mike Rapoportbf56c752009-07-21 17:48:43 +0300740 struct uart_pxa_port *sport = dev_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741
Russell King9480e302005-10-28 09:52:56 -0700742 if (sport)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743 uart_suspend_port(&serial_pxa_reg, &sport->port);
744
745 return 0;
746}
747
Mike Rapoportbf56c752009-07-21 17:48:43 +0300748static int serial_pxa_resume(struct device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749{
Mike Rapoportbf56c752009-07-21 17:48:43 +0300750 struct uart_pxa_port *sport = dev_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751
Russell King9480e302005-10-28 09:52:56 -0700752 if (sport)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700753 uart_resume_port(&serial_pxa_reg, &sport->port);
754
755 return 0;
756}
757
Alexey Dobriyan47145212009-12-14 18:00:08 -0800758static const struct dev_pm_ops serial_pxa_pm_ops = {
Mike Rapoportbf56c752009-07-21 17:48:43 +0300759 .suspend = serial_pxa_suspend,
760 .resume = serial_pxa_resume,
761};
762#endif
763
Russell King3ae5eae2005-11-09 22:32:44 +0000764static int serial_pxa_probe(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765{
Russell Kinge259a3a2007-08-20 09:47:41 +0100766 struct uart_pxa_port *sport;
767 struct resource *mmres, *irqres;
768 int ret;
769
770 mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
771 irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
772 if (!mmres || !irqres)
773 return -ENODEV;
774
775 sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
776 if (!sport)
777 return -ENOMEM;
778
Russell Kinge0d8b132008-11-11 17:52:32 +0000779 sport->clk = clk_get(&dev->dev, NULL);
Russell Kingb049bd92007-08-20 10:28:15 +0100780 if (IS_ERR(sport->clk)) {
781 ret = PTR_ERR(sport->clk);
782 goto err_free;
783 }
784
Russell Kinge259a3a2007-08-20 09:47:41 +0100785 sport->port.type = PORT_PXA;
786 sport->port.iotype = UPIO_MEM;
787 sport->port.mapbase = mmres->start;
788 sport->port.irq = irqres->start;
789 sport->port.fifosize = 64;
790 sport->port.ops = &serial_pxa_pops;
791 sport->port.line = dev->id;
792 sport->port.dev = &dev->dev;
793 sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
Russell Kingb049bd92007-08-20 10:28:15 +0100794 sport->port.uartclk = clk_get_rate(sport->clk);
Russell Kinge259a3a2007-08-20 09:47:41 +0100795
Eric Miao290a5582009-01-14 19:12:42 +0800796 switch (dev->id) {
797 case 0: sport->name = "FFUART"; break;
798 case 1: sport->name = "BTUART"; break;
799 case 2: sport->name = "STUART"; break;
800 case 3: sport->name = "HWUART"; break;
801 default:
Russell Kinge259a3a2007-08-20 09:47:41 +0100802 sport->name = "???";
Eric Miao290a5582009-01-14 19:12:42 +0800803 break;
804 }
Russell Kinge259a3a2007-08-20 09:47:41 +0100805
Joe Perches28f65c112011-06-09 09:13:32 -0700806 sport->port.membase = ioremap(mmres->start, resource_size(mmres));
Russell Kinge259a3a2007-08-20 09:47:41 +0100807 if (!sport->port.membase) {
808 ret = -ENOMEM;
Russell Kingb049bd92007-08-20 10:28:15 +0100809 goto err_clk;
Russell Kinge259a3a2007-08-20 09:47:41 +0100810 }
811
812 serial_pxa_ports[dev->id] = sport;
813
814 uart_add_one_port(&serial_pxa_reg, &sport->port);
815 platform_set_drvdata(dev, sport);
816
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817 return 0;
Russell Kinge259a3a2007-08-20 09:47:41 +0100818
Russell Kingb049bd92007-08-20 10:28:15 +0100819 err_clk:
820 clk_put(sport->clk);
Russell Kinge259a3a2007-08-20 09:47:41 +0100821 err_free:
822 kfree(sport);
823 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824}
825
Russell King3ae5eae2005-11-09 22:32:44 +0000826static int serial_pxa_remove(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700827{
Russell King3ae5eae2005-11-09 22:32:44 +0000828 struct uart_pxa_port *sport = platform_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700829
Russell King3ae5eae2005-11-09 22:32:44 +0000830 platform_set_drvdata(dev, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831
Russell Kinge259a3a2007-08-20 09:47:41 +0100832 uart_remove_one_port(&serial_pxa_reg, &sport->port);
Russell Kingb049bd92007-08-20 10:28:15 +0100833 clk_put(sport->clk);
Russell Kinge259a3a2007-08-20 09:47:41 +0100834 kfree(sport);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700835
836 return 0;
837}
838
Russell King3ae5eae2005-11-09 22:32:44 +0000839static struct platform_driver serial_pxa_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840 .probe = serial_pxa_probe,
841 .remove = serial_pxa_remove,
842
Russell King3ae5eae2005-11-09 22:32:44 +0000843 .driver = {
844 .name = "pxa2xx-uart",
Kay Sieverse169c132008-04-15 14:34:35 -0700845 .owner = THIS_MODULE,
Mike Rapoportbf56c752009-07-21 17:48:43 +0300846#ifdef CONFIG_PM
847 .pm = &serial_pxa_pm_ops,
848#endif
Russell King3ae5eae2005-11-09 22:32:44 +0000849 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700850};
851
852int __init serial_pxa_init(void)
853{
854 int ret;
855
856 ret = uart_register_driver(&serial_pxa_reg);
857 if (ret != 0)
858 return ret;
859
Russell King3ae5eae2005-11-09 22:32:44 +0000860 ret = platform_driver_register(&serial_pxa_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700861 if (ret != 0)
862 uart_unregister_driver(&serial_pxa_reg);
863
864 return ret;
865}
866
867void __exit serial_pxa_exit(void)
868{
Russell King3ae5eae2005-11-09 22:32:44 +0000869 platform_driver_unregister(&serial_pxa_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700870 uart_unregister_driver(&serial_pxa_reg);
871}
872
873module_init(serial_pxa_init);
874module_exit(serial_pxa_exit);
875
876MODULE_LICENSE("GPL");
Kay Sieverse169c132008-04-15 14:34:35 -0700877MODULE_ALIAS("platform:pxa2xx-uart");