Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * arch/sh/boards/renesas/edosk7705/io.c |
| 3 | * |
| 4 | * Copyright (C) 2001 Ian da Silva, Jeremy Siegel |
| 5 | * Based largely on io_se.c. |
| 6 | * |
| 7 | * I/O routines for Hitachi EDOSK7705 board. |
| 8 | * |
| 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/types.h> |
| 13 | #include <asm/io.h> |
Paul Mundt | 7639a45 | 2008-10-20 13:02:48 +0900 | [diff] [blame] | 14 | #include <mach/edosk7705.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 15 | #include <asm/addrspace.h> |
| 16 | |
| 17 | #define SMC_IOADDR 0xA2000000 |
| 18 | |
| 19 | #define maybebadio(name,port) \ |
| 20 | printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ |
| 21 | #name, (port), (__u32) __builtin_return_address(0)) |
| 22 | |
| 23 | /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ |
| 24 | unsigned long sh_edosk7705_isa_port2addr(unsigned long port) |
| 25 | { |
| 26 | if (port >= 0x300 && port < 0x320) { |
| 27 | /* SMC91C96 registers are 4 byte aligned rather than the |
| 28 | * usual 2 byte! |
| 29 | */ |
| 30 | return SMC_IOADDR + ( (port - 0x300) * 2); |
| 31 | } |
| 32 | |
| 33 | maybebadio(sh_edosk7705_isa_port2addr, port); |
| 34 | return port; |
| 35 | } |
| 36 | |
| 37 | /* Trying to read / write bytes on odd-byte boundaries to the Ethernet |
| 38 | * registers causes problems. So we bit-shift the value and read / write |
| 39 | * in 2 byte chunks. Setting the low byte to 0 does not cause problems |
| 40 | * now as odd byte writes are only made on the bit mask / interrupt |
| 41 | * register. This may not be the case in future Mar-2003 SJD |
| 42 | */ |
| 43 | unsigned char sh_edosk7705_inb(unsigned long port) |
| 44 | { |
| 45 | if (port >= 0x300 && port < 0x320 && port & 0x01) { |
| 46 | return (volatile unsigned char)(generic_inw(port -1) >> 8); |
| 47 | } |
| 48 | return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port); |
| 49 | } |
| 50 | |
| 51 | unsigned int sh_edosk7705_inl(unsigned long port) |
| 52 | { |
| 53 | return *(volatile unsigned long *)port; |
| 54 | } |
| 55 | |
| 56 | void sh_edosk7705_outb(unsigned char value, unsigned long port) |
| 57 | { |
| 58 | if (port >= 0x300 && port < 0x320 && port & 0x01) { |
| 59 | generic_outw(((unsigned short)value << 8), port -1); |
| 60 | return; |
| 61 | } |
| 62 | *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value; |
| 63 | } |
| 64 | |
| 65 | void sh_edosk7705_outl(unsigned int value, unsigned long port) |
| 66 | { |
| 67 | *(volatile unsigned long *)port = value; |
| 68 | } |
| 69 | |
| 70 | void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) |
| 71 | { |
| 72 | unsigned char *p = addr; |
| 73 | while (count--) *p++ = sh_edosk7705_inb(port); |
| 74 | } |
| 75 | |
| 76 | void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count) |
| 77 | { |
| 78 | unsigned long *p = (unsigned long*)addr; |
| 79 | while (count--) |
| 80 | *p++ = *(volatile unsigned long *)port; |
| 81 | } |
| 82 | |
| 83 | void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) |
| 84 | { |
| 85 | unsigned char *p = (unsigned char*)addr; |
| 86 | while (count--) sh_edosk7705_outb(*p++, port); |
| 87 | } |
| 88 | |
| 89 | void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count) |
| 90 | { |
| 91 | unsigned long *p = (unsigned long*)addr; |
| 92 | while (count--) sh_edosk7705_outl(*p++, port); |
| 93 | } |
| 94 | |