blob: 007115dc9ce0e14d8fc380f29134ebc28a2c5e49 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
3 *
4 * Copyright (C) 2003 NEC Corporation
5 * Copyright (C) 2003 Miles Bader <miles@gnu.org>
6 *
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
10 *
11 * Written by Miles Bader <miles@gnu.org>
12 */
13
Linus Torvalds1da177e2005-04-16 15:20:36 -070014#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/mm.h>
17#include <linux/swap.h>
18#include <linux/bootmem.h>
19#include <linux/irq.h>
20
21#include <asm/atomic.h>
22#include <asm/page.h>
23#include <asm/machdep.h>
24#include <asm/v850e_timer_d.h>
25
26#include "mach.h"
27
28void __init mach_sched_init (struct irqaction *timer_action)
29{
30 /* Start hardware timer. */
31 v850e_timer_d_configure (0, HZ);
32 /* Install timer interrupt handler. */
33 setup_irq (IRQ_INTCMD(0), timer_action);
34}
35
36static struct v850e_intc_irq_init irq_inits[] = {
37 { "IRQ", 0, NUM_CPU_IRQS, 1, 7 },
38 { "INTP", IRQ_INTP(0), IRQ_INTP_NUM, 1, 5 },
39 { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 3 },
40 { "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
41 { "UBTIR", IRQ_INTUBTIR(0), IRQ_INTUBTIR_NUM, 5, 4 },
42 { "UBTIT", IRQ_INTUBTIT(0), IRQ_INTUBTIT_NUM, 5, 4 },
43 { "UBTIF", IRQ_INTUBTIF(0), IRQ_INTUBTIF_NUM, 5, 4 },
44 { "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
45 { 0 }
46};
Ahmed S. Darwish81d79be2007-02-10 01:44:30 -080047#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -070048
49static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
50
51/* Initialize V850E/ME2 chip interrupts. */
52void __init me2_init_irqs (void)
53{
54 v850e_intc_init_irq_types (irq_inits, hw_itypes);
55}
56
57/* Called before configuring an on-chip UART. */
58void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
59{
60 if (chan == 0) {
Simon Arlott5b203112007-10-20 01:24:05 +020061 /* Specify that the relevant pins on the chip should do
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 serial I/O, not direct I/O. */
63 ME2_PORT1_PMC |= 0xC;
64 /* Specify that we're using the UART, not the CSI device. */
65 ME2_PORT1_PFC |= 0xC;
66 } else if (chan == 1) {
Simon Arlott5b203112007-10-20 01:24:05 +020067 /* Specify that the relevant pins on the chip should do
Linus Torvalds1da177e2005-04-16 15:20:36 -070068 serial I/O, not direct I/O. */
69 ME2_PORT2_PMC |= 0x6;
70 /* Specify that we're using the UART, not the CSI device. */
71 ME2_PORT2_PFC |= 0x6;
72 }
73}