| /* |
| * Setup pointers to hardware-dependent routines. |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * |
| * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the |
| * terms of the GNU General Public License version 2. This program is |
| * licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) |
| */ |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/console.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| |
| #include <asm/reboot.h> |
| #include <asm/time.h> |
| #include <asm/txx9tmr.h> |
| #include <asm/io.h> |
| #include <asm/txx9/generic.h> |
| #include <asm/txx9/pci.h> |
| #include <asm/txx9/rbtx4938.h> |
| #ifdef CONFIG_SERIAL_TXX9 |
| #include <linux/serial_core.h> |
| #endif |
| #include <linux/spi/spi.h> |
| #include <asm/txx9/spi.h> |
| #include <asm/txx9pio.h> |
| |
| static int tx4938_ccfg_toeon = 1; |
| |
| static void rbtx4938_machine_halt(void) |
| { |
| printk(KERN_NOTICE "System Halted\n"); |
| local_irq_disable(); |
| |
| while (1) |
| __asm__(".set\tmips3\n\t" |
| "wait\n\t" |
| ".set\tmips0"); |
| } |
| |
| static void rbtx4938_machine_power_off(void) |
| { |
| rbtx4938_machine_halt(); |
| /* no return */ |
| } |
| |
| static void rbtx4938_machine_restart(char *command) |
| { |
| local_irq_disable(); |
| |
| printk("Rebooting..."); |
| writeb(1, rbtx4938_softresetlock_addr); |
| writeb(1, rbtx4938_sfvol_addr); |
| writeb(1, rbtx4938_softreset_addr); |
| while(1) |
| ; |
| } |
| |
| static void __init rbtx4938_pci_setup(void) |
| { |
| #ifdef CONFIG_PCI |
| int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); |
| struct pci_controller *c = &txx9_primary_pcic; |
| |
| register_pci_controller(c); |
| |
| if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) |
| txx9_pci_option = |
| (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | |
| TXX9_PCI_OPT_CLK_66; /* already configured */ |
| |
| /* Reset PCI Bus */ |
| writeb(0, rbtx4938_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_66) |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| writeb(1, rbtx4938_pcireset_addr); |
| iob(); |
| |
| tx4938_report_pciclk(); |
| tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_AUTO && |
| txx9_pci66_check(c, 0, 0)) { |
| /* Reset PCI Bus */ |
| writeb(0, rbtx4938_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| writeb(1, rbtx4938_pcireset_addr); |
| iob(); |
| /* Reinitialize PCIC */ |
| tx4938_report_pciclk(); |
| tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| } |
| |
| if (__raw_readq(&tx4938_ccfgptr->pcfg) & |
| (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) { |
| /* Reset PCIC1 */ |
| txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); |
| /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ |
| if (!(__raw_readq(&tx4938_ccfgptr->ccfg) |
| & TX4938_CCFG_PCI1DMD)) |
| tx4938_ccfg_set(TX4938_CCFG_PCI1_66); |
| mdelay(10); |
| /* clear PCIC1 reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); |
| tx4938_report_pci1clk(); |
| |
| /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ |
| c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); |
| register_pci_controller(c); |
| tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); |
| } |
| #endif /* CONFIG_PCI */ |
| } |
| |
| /* SPI support */ |
| |
| /* chip select for SPI devices */ |
| #define SEEPROM1_CS 7 /* PIO7 */ |
| #define SEEPROM2_CS 0 /* IOC */ |
| #define SEEPROM3_CS 1 /* IOC */ |
| #define SRTC_CS 2 /* IOC */ |
| |
| static int __init rbtx4938_ethaddr_init(void) |
| { |
| #ifdef CONFIG_PCI |
| unsigned char dat[17]; |
| unsigned char sum; |
| int i; |
| |
| /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ |
| if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { |
| printk(KERN_ERR "seeprom: read error.\n"); |
| return -ENODEV; |
| } else { |
| if (strcmp(dat, "MAC") != 0) |
| printk(KERN_WARNING "seeprom: bad signature.\n"); |
| for (i = 0, sum = 0; i < sizeof(dat); i++) |
| sum += dat[i]; |
| if (sum) |
| printk(KERN_WARNING "seeprom: bad checksum.\n"); |
| } |
| for (i = 0; i < 2; i++) { |
| unsigned int id = |
| TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); |
| struct platform_device *pdev; |
| if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & |
| (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) |
| continue; |
| pdev = platform_device_alloc("tc35815-mac", id); |
| if (!pdev || |
| platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || |
| platform_device_add(pdev)) |
| platform_device_put(pdev); |
| } |
| #endif /* CONFIG_PCI */ |
| return 0; |
| } |
| |
| static void __init rbtx4938_spi_setup(void) |
| { |
| /* set SPI_SEL */ |
| txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL); |
| } |
| |
| static struct resource rbtx4938_fpga_resource; |
| static struct resource tx4938_sdram_resource[4]; |
| static struct resource tx4938_sram_resource; |
| |
| void __init tx4938_board_setup(void) |
| { |
| int i; |
| unsigned long divmode; |
| int cpuclk = 0; |
| unsigned long pcode = TX4938_REV_PCODE(); |
| |
| ioport_resource.start = 0; |
| ioport_resource.end = 0xffffffff; |
| iomem_resource.start = 0; |
| iomem_resource.end = 0xffffffff; /* expand to 4GB */ |
| |
| txx9_reg_res_init(pcode, TX4938_REG_BASE, |
| TX4938_REG_SIZE); |
| /* SDRAMC,EBUSC are configured by PROM */ |
| for (i = 0; i < 8; i++) { |
| if (!(TX4938_EBUSC_CR(i) & 0x8)) |
| continue; /* disabled */ |
| txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i); |
| txx9_ce_res[i].end = |
| txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1; |
| request_resource(&iomem_resource, &txx9_ce_res[i]); |
| } |
| |
| /* clocks */ |
| if (txx9_master_clock) { |
| u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); |
| /* calculate gbus_clock and cpu_clock_freq from master_clock */ |
| divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_8: |
| case TX4938_CCFG_DIVMODE_10: |
| case TX4938_CCFG_DIVMODE_12: |
| case TX4938_CCFG_DIVMODE_16: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_gbus_clock = txx9_master_clock * 4; break; |
| default: |
| txx9_gbus_clock = txx9_master_clock; |
| } |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_2: |
| case TX4938_CCFG_DIVMODE_8: |
| cpuclk = txx9_gbus_clock * 2; break; |
| case TX4938_CCFG_DIVMODE_2_5: |
| case TX4938_CCFG_DIVMODE_10: |
| cpuclk = txx9_gbus_clock * 5 / 2; break; |
| case TX4938_CCFG_DIVMODE_3: |
| case TX4938_CCFG_DIVMODE_12: |
| cpuclk = txx9_gbus_clock * 3; break; |
| case TX4938_CCFG_DIVMODE_4: |
| case TX4938_CCFG_DIVMODE_16: |
| cpuclk = txx9_gbus_clock * 4; break; |
| case TX4938_CCFG_DIVMODE_4_5: |
| case TX4938_CCFG_DIVMODE_18: |
| cpuclk = txx9_gbus_clock * 9 / 2; break; |
| } |
| txx9_cpu_clock = cpuclk; |
| } else { |
| u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); |
| if (txx9_cpu_clock == 0) { |
| txx9_cpu_clock = 300000000; /* 300MHz */ |
| } |
| /* calculate gbus_clock and master_clock from cpu_clock_freq */ |
| cpuclk = txx9_cpu_clock; |
| divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_2: |
| case TX4938_CCFG_DIVMODE_8: |
| txx9_gbus_clock = cpuclk / 2; break; |
| case TX4938_CCFG_DIVMODE_2_5: |
| case TX4938_CCFG_DIVMODE_10: |
| txx9_gbus_clock = cpuclk * 2 / 5; break; |
| case TX4938_CCFG_DIVMODE_3: |
| case TX4938_CCFG_DIVMODE_12: |
| txx9_gbus_clock = cpuclk / 3; break; |
| case TX4938_CCFG_DIVMODE_4: |
| case TX4938_CCFG_DIVMODE_16: |
| txx9_gbus_clock = cpuclk / 4; break; |
| case TX4938_CCFG_DIVMODE_4_5: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_gbus_clock = cpuclk * 2 / 9; break; |
| } |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_8: |
| case TX4938_CCFG_DIVMODE_10: |
| case TX4938_CCFG_DIVMODE_12: |
| case TX4938_CCFG_DIVMODE_16: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_master_clock = txx9_gbus_clock / 4; break; |
| default: |
| txx9_master_clock = txx9_gbus_clock; |
| } |
| } |
| /* change default value to udelay/mdelay take reasonable time */ |
| loops_per_jiffy = txx9_cpu_clock / HZ / 2; |
| |
| /* CCFG */ |
| /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ |
| tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW); |
| /* do reset on watchdog */ |
| tx4938_ccfg_set(TX4938_CCFG_WR); |
| /* clear PCIC1 reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); |
| |
| /* enable Timeout BusError */ |
| if (tx4938_ccfg_toeon) |
| tx4938_ccfg_set(TX4938_CCFG_TOE); |
| |
| /* DMA selection */ |
| txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL); |
| |
| /* Use external clock for external arbiter */ |
| if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB)) |
| txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL); |
| |
| printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", |
| txx9_pcode_str, |
| (cpuclk + 500000) / 1000000, |
| (txx9_master_clock + 500000) / 1000000, |
| (__u32)____raw_readq(&tx4938_ccfgptr->crir), |
| (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), |
| (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg)); |
| |
| printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str); |
| for (i = 0; i < 4; i++) { |
| unsigned long long cr = tx4938_sdramcptr->cr[i]; |
| unsigned long ram_base, ram_size; |
| if (!((unsigned long)cr & 0x00000400)) |
| continue; /* disabled */ |
| ram_base = (unsigned long)(cr >> 49) << 21; |
| ram_size = ((unsigned long)(cr >> 33) + 1) << 21; |
| if (ram_base >= 0x20000000) |
| continue; /* high memory (ignore) */ |
| printk(" CR%d:%016Lx", i, cr); |
| tx4938_sdram_resource[i].name = "SDRAM"; |
| tx4938_sdram_resource[i].start = ram_base; |
| tx4938_sdram_resource[i].end = ram_base + ram_size - 1; |
| tx4938_sdram_resource[i].flags = IORESOURCE_MEM; |
| request_resource(&iomem_resource, &tx4938_sdram_resource[i]); |
| } |
| printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); |
| |
| /* SRAM */ |
| if (tx4938_sramcptr->cr & 1) { |
| unsigned int size = 0x800; |
| unsigned long base = |
| (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); |
| tx4938_sram_resource.name = "SRAM"; |
| tx4938_sram_resource.start = base; |
| tx4938_sram_resource.end = base + size - 1; |
| tx4938_sram_resource.flags = IORESOURCE_MEM; |
| request_resource(&iomem_resource, &tx4938_sram_resource); |
| } |
| |
| /* TMR */ |
| for (i = 0; i < TX4938_NR_TMR; i++) |
| txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); |
| |
| /* enable DMA */ |
| for (i = 0; i < 2; i++) |
| ____raw_writeq(TX4938_DMA_MCR_MSTEN, |
| (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); |
| |
| /* PIO */ |
| __raw_writel(0, &tx4938_pioptr->maskcpu); |
| __raw_writel(0, &tx4938_pioptr->maskext); |
| |
| #ifdef CONFIG_PCI |
| txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); |
| #endif |
| } |
| |
| static void __init rbtx4938_time_init(void) |
| { |
| mips_hpt_frequency = txx9_cpu_clock / 2; |
| if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) |
| txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, |
| TXX9_IRQ_BASE + TX4938_IR_TMR(0), |
| txx9_gbus_clock / 2); |
| } |
| |
| static void __init rbtx4938_mem_setup(void) |
| { |
| unsigned long long pcfg; |
| char *argptr; |
| |
| iomem_resource.end = 0xffffffff; /* 4GB */ |
| |
| if (txx9_master_clock == 0) |
| txx9_master_clock = 25000000; /* 25MHz */ |
| tx4938_board_setup(); |
| #ifndef CONFIG_PCI |
| set_io_port_base(RBTX4938_ETHER_BASE); |
| #endif |
| |
| #ifdef CONFIG_SERIAL_TXX9 |
| { |
| extern int early_serial_txx9_setup(struct uart_port *port); |
| int i; |
| struct uart_port req; |
| for(i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (char *)(0xff1ff300 + i * 0x100); |
| req.mapbase = 0xff1ff300 + i * 0x100; |
| req.irq = RBTX4938_IRQ_IRC_SIO(i); |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = 50000000; |
| early_serial_txx9_setup(&req); |
| } |
| } |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "console=") == NULL) { |
| strcat(argptr, " console=ttyS0,38400"); |
| } |
| #endif |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 |
| printk("PIOSEL: disabling both ata and nand selection\n"); |
| local_irq_disable(); |
| txx9_clear64(&tx4938_ccfgptr->pcfg, |
| TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND |
| printk("PIOSEL: enabling nand selection\n"); |
| txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); |
| txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA |
| printk("PIOSEL: enabling ata selection\n"); |
| txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); |
| txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); |
| #endif |
| |
| #ifdef CONFIG_IP_PNP |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "ip=") == NULL) { |
| strcat(argptr, " ip=any"); |
| } |
| #endif |
| |
| |
| #ifdef CONFIG_FB |
| { |
| conswitchp = &dummy_con; |
| } |
| #endif |
| |
| rbtx4938_spi_setup(); |
| pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ |
| /* fixup piosel */ |
| if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == |
| TX4938_PCFG_ATA_SEL) |
| writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, |
| rbtx4938_piosel_addr); |
| else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == |
| TX4938_PCFG_NDF_SEL) |
| writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, |
| rbtx4938_piosel_addr); |
| else |
| writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), |
| rbtx4938_piosel_addr); |
| |
| rbtx4938_fpga_resource.name = "FPGA Registers"; |
| rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); |
| rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; |
| rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) |
| printk("request resource for fpga failed\n"); |
| |
| _machine_restart = rbtx4938_machine_restart; |
| _machine_halt = rbtx4938_machine_halt; |
| pm_power_off = rbtx4938_machine_power_off; |
| |
| writeb(0xff, rbtx4938_led_addr); |
| printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", |
| readb(rbtx4938_fpga_rev_addr), |
| readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); |
| } |
| |
| static int __init rbtx4938_ne_init(void) |
| { |
| struct resource res[] = { |
| { |
| .start = RBTX4938_RTL_8019_BASE, |
| .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, |
| .flags = IORESOURCE_IO, |
| }, { |
| .start = RBTX4938_RTL_8019_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("ne", -1, |
| res, ARRAY_SIZE(res)); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| |
| /* GPIO support */ |
| |
| int gpio_to_irq(unsigned gpio) |
| { |
| return -EINVAL; |
| } |
| |
| int irq_to_gpio(unsigned irq) |
| { |
| return -EINVAL; |
| } |
| |
| static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); |
| |
| static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| u8 val; |
| unsigned long flags; |
| spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); |
| val = readb(rbtx4938_spics_addr); |
| if (value) |
| val |= 1 << offset; |
| else |
| val &= ~(1 << offset); |
| writeb(val, rbtx4938_spics_addr); |
| mmiowb(); |
| spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); |
| } |
| |
| static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| rbtx4938_spi_gpio_set(chip, offset, value); |
| return 0; |
| } |
| |
| static struct gpio_chip rbtx4938_spi_gpio_chip = { |
| .set = rbtx4938_spi_gpio_set, |
| .direction_output = rbtx4938_spi_gpio_dir_out, |
| .label = "RBTX4938-SPICS", |
| .base = 16, |
| .ngpio = 3, |
| }; |
| |
| /* SPI support */ |
| |
| static void __init txx9_spi_init(unsigned long base, int irq) |
| { |
| struct resource res[] = { |
| { |
| .start = base, |
| .end = base + 0x20 - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = irq, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| platform_device_register_simple("spi_txx9", 0, |
| res, ARRAY_SIZE(res)); |
| } |
| |
| static int __init rbtx4938_spi_init(void) |
| { |
| struct spi_board_info srtc_info = { |
| .modalias = "rtc-rs5c348", |
| .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ |
| .bus_num = 0, |
| .chip_select = 16 + SRTC_CS, |
| /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ |
| .mode = SPI_MODE_1 | SPI_CS_HIGH, |
| }; |
| spi_register_board_info(&srtc_info, 1); |
| spi_eeprom_register(SEEPROM1_CS); |
| spi_eeprom_register(16 + SEEPROM2_CS); |
| spi_eeprom_register(16 + SEEPROM3_CS); |
| gpio_request(16 + SRTC_CS, "rtc-rs5c348"); |
| gpio_direction_output(16 + SRTC_CS, 0); |
| gpio_request(SEEPROM1_CS, "seeprom1"); |
| gpio_direction_output(SEEPROM1_CS, 1); |
| gpio_request(16 + SEEPROM2_CS, "seeprom2"); |
| gpio_direction_output(16 + SEEPROM2_CS, 1); |
| gpio_request(16 + SEEPROM3_CS, "seeprom3"); |
| gpio_direction_output(16 + SEEPROM3_CS, 1); |
| txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); |
| return 0; |
| } |
| |
| static void __init rbtx4938_arch_init(void) |
| { |
| txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); |
| gpiochip_add(&rbtx4938_spi_gpio_chip); |
| rbtx4938_pci_setup(); |
| rbtx4938_spi_init(); |
| } |
| |
| /* Watchdog support */ |
| |
| static int __init txx9_wdt_init(unsigned long base) |
| { |
| struct resource res = { |
| .start = base, |
| .end = base + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("txx9wdt", -1, &res, 1); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| |
| static int __init rbtx4938_wdt_init(void) |
| { |
| return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); |
| } |
| |
| static void __init rbtx4938_device_init(void) |
| { |
| rbtx4938_ethaddr_init(); |
| rbtx4938_ne_init(); |
| rbtx4938_wdt_init(); |
| } |
| |
| struct txx9_board_vec rbtx4938_vec __initdata = { |
| .system = "Toshiba RBTX4938", |
| .prom_init = rbtx4938_prom_init, |
| .mem_setup = rbtx4938_mem_setup, |
| .irq_setup = rbtx4938_irq_setup, |
| .time_init = rbtx4938_time_init, |
| .device_init = rbtx4938_device_init, |
| .arch_init = rbtx4938_arch_init, |
| #ifdef CONFIG_PCI |
| .pci_map_irq = rbtx4938_pci_map_irq, |
| #endif |
| }; |