| /* |
| * An I2C driver for the Philips PCF8563 RTC |
| * Copyright 2005-06 Tower Technologies |
| * |
| * Author: Alessandro Zummo <a.zummo@towertech.it> |
| * Maintainers: http://www.nslu2-linux.org/ |
| * |
| * based on the other drivers in this same directory. |
| * |
| * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/bcd.h> |
| #include <linux/rtc.h> |
| |
| #define DRV_VERSION "0.4.2" |
| |
| /* Addresses to scan: none |
| * This chip cannot be reliably autodetected. An empty eeprom |
| * located at 0x51 will pass the validation routine due to |
| * the way the registers are implemented. |
| */ |
| static unsigned short normal_i2c[] = { I2C_CLIENT_END }; |
| |
| /* Module parameters */ |
| I2C_CLIENT_INSMOD; |
| |
| #define PCF8563_REG_ST1 0x00 /* status */ |
| #define PCF8563_REG_ST2 0x01 |
| |
| #define PCF8563_REG_SC 0x02 /* datetime */ |
| #define PCF8563_REG_MN 0x03 |
| #define PCF8563_REG_HR 0x04 |
| #define PCF8563_REG_DM 0x05 |
| #define PCF8563_REG_DW 0x06 |
| #define PCF8563_REG_MO 0x07 |
| #define PCF8563_REG_YR 0x08 |
| |
| #define PCF8563_REG_AMN 0x09 /* alarm */ |
| #define PCF8563_REG_AHR 0x0A |
| #define PCF8563_REG_ADM 0x0B |
| #define PCF8563_REG_ADW 0x0C |
| |
| #define PCF8563_REG_CLKO 0x0D /* clock out */ |
| #define PCF8563_REG_TMRC 0x0E /* timer control */ |
| #define PCF8563_REG_TMR 0x0F /* timer */ |
| |
| #define PCF8563_SC_LV 0x80 /* low voltage */ |
| #define PCF8563_MO_C 0x80 /* century */ |
| |
| static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind); |
| static int pcf8563_detach(struct i2c_client *client); |
| |
| /* |
| * In the routines that deal directly with the pcf8563 hardware, we use |
| * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
| */ |
| static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) |
| { |
| unsigned char buf[13] = { PCF8563_REG_ST1 }; |
| |
| struct i2c_msg msgs[] = { |
| { client->addr, 0, 1, buf }, /* setup read ptr */ |
| { client->addr, I2C_M_RD, 13, buf }, /* read status + date */ |
| }; |
| |
| /* read registers */ |
| if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { |
| dev_err(&client->dev, "%s: read error\n", __FUNCTION__); |
| return -EIO; |
| } |
| |
| if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) |
| dev_info(&client->dev, |
| "low voltage detected, date/time is not reliable.\n"); |
| |
| dev_dbg(&client->dev, |
| "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " |
| "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
| __FUNCTION__, |
| buf[0], buf[1], buf[2], buf[3], |
| buf[4], buf[5], buf[6], buf[7], |
| buf[8]); |
| |
| |
| tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F); |
| tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F); |
| tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
| tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F); |
| tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; |
| tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
| tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR]) |
| + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0); |
| |
| dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __FUNCTION__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| /* the clock can give out invalid datetime, but we cannot return |
| * -EINVAL otherwise hwclock will refuse to set the time on bootup. |
| */ |
| if (rtc_valid_tm(tm) < 0) |
| dev_err(&client->dev, "retrieved date/time is not valid.\n"); |
| |
| return 0; |
| } |
| |
| static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
| { |
| int i, err; |
| unsigned char buf[9]; |
| |
| dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __FUNCTION__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| /* hours, minutes and seconds */ |
| buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec); |
| buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min); |
| buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour); |
| |
| buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday); |
| |
| /* month, 1 - 12 */ |
| buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1); |
| |
| /* year and century */ |
| buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100); |
| if (tm->tm_year / 100) |
| buf[PCF8563_REG_MO] |= PCF8563_MO_C; |
| |
| buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; |
| |
| /* write register's data */ |
| for (i = 0; i < 7; i++) { |
| unsigned char data[2] = { PCF8563_REG_SC + i, |
| buf[PCF8563_REG_SC + i] }; |
| |
| err = i2c_master_send(client, data, sizeof(data)); |
| if (err != sizeof(data)) { |
| dev_err(&client->dev, |
| "%s: err=%d addr=%02x, data=%02x\n", |
| __FUNCTION__, err, data[0], data[1]); |
| return -EIO; |
| } |
| }; |
| |
| return 0; |
| } |
| |
| struct pcf8563_limit |
| { |
| unsigned char reg; |
| unsigned char mask; |
| unsigned char min; |
| unsigned char max; |
| }; |
| |
| static int pcf8563_validate_client(struct i2c_client *client) |
| { |
| int i; |
| |
| static const struct pcf8563_limit pattern[] = { |
| /* register, mask, min, max */ |
| { PCF8563_REG_SC, 0x7F, 0, 59 }, |
| { PCF8563_REG_MN, 0x7F, 0, 59 }, |
| { PCF8563_REG_HR, 0x3F, 0, 23 }, |
| { PCF8563_REG_DM, 0x3F, 0, 31 }, |
| { PCF8563_REG_MO, 0x1F, 0, 12 }, |
| }; |
| |
| /* check limits (only registers with bcd values) */ |
| for (i = 0; i < ARRAY_SIZE(pattern); i++) { |
| int xfer; |
| unsigned char value; |
| unsigned char buf = pattern[i].reg; |
| |
| struct i2c_msg msgs[] = { |
| { client->addr, 0, 1, &buf }, |
| { client->addr, I2C_M_RD, 1, &buf }, |
| }; |
| |
| xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| |
| if (xfer != ARRAY_SIZE(msgs)) { |
| dev_err(&client->adapter->dev, |
| "%s: could not read register 0x%02X\n", |
| __FUNCTION__, pattern[i].reg); |
| |
| return -EIO; |
| } |
| |
| value = BCD2BIN(buf & pattern[i].mask); |
| |
| if (value > pattern[i].max || |
| value < pattern[i].min) { |
| dev_dbg(&client->adapter->dev, |
| "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, " |
| "max=%d, value=%d, raw=0x%02X\n", |
| __FUNCTION__, i, pattern[i].reg, pattern[i].mask, |
| pattern[i].min, pattern[i].max, |
| value, buf); |
| |
| return -ENODEV; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| return pcf8563_get_datetime(to_i2c_client(dev), tm); |
| } |
| |
| static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| return pcf8563_set_datetime(to_i2c_client(dev), tm); |
| } |
| |
| static int pcf8563_rtc_proc(struct device *dev, struct seq_file *seq) |
| { |
| seq_printf(seq, "24hr\t\t: yes\n"); |
| return 0; |
| } |
| |
| static struct rtc_class_ops pcf8563_rtc_ops = { |
| .proc = pcf8563_rtc_proc, |
| .read_time = pcf8563_rtc_read_time, |
| .set_time = pcf8563_rtc_set_time, |
| }; |
| |
| static int pcf8563_attach(struct i2c_adapter *adapter) |
| { |
| return i2c_probe(adapter, &addr_data, pcf8563_probe); |
| } |
| |
| static struct i2c_driver pcf8563_driver = { |
| .driver = { |
| .name = "pcf8563", |
| }, |
| .id = I2C_DRIVERID_PCF8563, |
| .attach_adapter = &pcf8563_attach, |
| .detach_client = &pcf8563_detach, |
| }; |
| |
| static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) |
| { |
| struct i2c_client *client; |
| struct rtc_device *rtc; |
| |
| int err = 0; |
| |
| dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| client->addr = address; |
| client->driver = &pcf8563_driver; |
| client->adapter = adapter; |
| |
| strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE); |
| |
| /* Verify the chip is really an PCF8563 */ |
| if (kind < 0) { |
| if (pcf8563_validate_client(client) < 0) { |
| err = -ENODEV; |
| goto exit_kfree; |
| } |
| } |
| |
| /* Inform the i2c layer */ |
| if ((err = i2c_attach_client(client))) |
| goto exit_kfree; |
| |
| dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); |
| |
| rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev, |
| &pcf8563_rtc_ops, THIS_MODULE); |
| |
| if (IS_ERR(rtc)) { |
| err = PTR_ERR(rtc); |
| dev_err(&client->dev, |
| "unable to register the class device\n"); |
| goto exit_detach; |
| } |
| |
| i2c_set_clientdata(client, rtc); |
| |
| return 0; |
| |
| exit_detach: |
| i2c_detach_client(client); |
| |
| exit_kfree: |
| kfree(client); |
| |
| exit: |
| return err; |
| } |
| |
| static int pcf8563_detach(struct i2c_client *client) |
| { |
| int err; |
| struct rtc_device *rtc = i2c_get_clientdata(client); |
| |
| if (rtc) |
| rtc_device_unregister(rtc); |
| |
| if ((err = i2c_detach_client(client))) |
| return err; |
| |
| kfree(client); |
| |
| return 0; |
| } |
| |
| static int __init pcf8563_init(void) |
| { |
| return i2c_add_driver(&pcf8563_driver); |
| } |
| |
| static void __exit pcf8563_exit(void) |
| { |
| i2c_del_driver(&pcf8563_driver); |
| } |
| |
| MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); |
| MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| module_init(pcf8563_init); |
| module_exit(pcf8563_exit); |