| /* |
| * ARMv5 [xscale] Performance counter handling code. |
| * |
| * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com> |
| * |
| * Based on the previous xscale OProfile code. |
| * |
| * There are two variants of the xscale PMU that we support: |
| * - xscale1pmu: 2 event counters and a cycle counter |
| * - xscale2pmu: 4 event counters and a cycle counter |
| * The two variants share event definitions, but have different |
| * PMU structures. |
| */ |
| |
| #ifdef CONFIG_CPU_XSCALE |
| enum xscale_perf_types { |
| XSCALE_PERFCTR_ICACHE_MISS = 0x00, |
| XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, |
| XSCALE_PERFCTR_DATA_STALL = 0x02, |
| XSCALE_PERFCTR_ITLB_MISS = 0x03, |
| XSCALE_PERFCTR_DTLB_MISS = 0x04, |
| XSCALE_PERFCTR_BRANCH = 0x05, |
| XSCALE_PERFCTR_BRANCH_MISS = 0x06, |
| XSCALE_PERFCTR_INSTRUCTION = 0x07, |
| XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, |
| XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, |
| XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, |
| XSCALE_PERFCTR_DCACHE_MISS = 0x0B, |
| XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, |
| XSCALE_PERFCTR_PC_CHANGED = 0x0D, |
| XSCALE_PERFCTR_BCU_REQUEST = 0x10, |
| XSCALE_PERFCTR_BCU_FULL = 0x11, |
| XSCALE_PERFCTR_BCU_DRAIN = 0x12, |
| XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, |
| XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, |
| XSCALE_PERFCTR_RMW = 0x16, |
| /* XSCALE_PERFCTR_CCNT is not hardware defined */ |
| XSCALE_PERFCTR_CCNT = 0xFE, |
| XSCALE_PERFCTR_UNUSED = 0xFF, |
| }; |
| |
| enum xscale_counters { |
| XSCALE_CYCLE_COUNTER = 1, |
| XSCALE_COUNTER0, |
| XSCALE_COUNTER1, |
| XSCALE_COUNTER2, |
| XSCALE_COUNTER3, |
| }; |
| |
| static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, |
| [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, |
| [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, |
| [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, |
| [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, |
| }; |
| |
| static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { |
| [C(L1D)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| [C(L1I)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| [C(LL)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| [C(DTLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| [C(ITLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| [C(BPU)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, |
| [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
| }, |
| }, |
| }; |
| |
| #define XSCALE_PMU_ENABLE 0x001 |
| #define XSCALE_PMN_RESET 0x002 |
| #define XSCALE_CCNT_RESET 0x004 |
| #define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) |
| #define XSCALE_PMU_CNT64 0x008 |
| |
| #define XSCALE1_OVERFLOWED_MASK 0x700 |
| #define XSCALE1_CCOUNT_OVERFLOW 0x400 |
| #define XSCALE1_COUNT0_OVERFLOW 0x100 |
| #define XSCALE1_COUNT1_OVERFLOW 0x200 |
| #define XSCALE1_CCOUNT_INT_EN 0x040 |
| #define XSCALE1_COUNT0_INT_EN 0x010 |
| #define XSCALE1_COUNT1_INT_EN 0x020 |
| #define XSCALE1_COUNT0_EVT_SHFT 12 |
| #define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) |
| #define XSCALE1_COUNT1_EVT_SHFT 20 |
| #define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) |
| |
| static inline u32 |
| xscale1pmu_read_pmnc(void) |
| { |
| u32 val; |
| asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); |
| return val; |
| } |
| |
| static inline void |
| xscale1pmu_write_pmnc(u32 val) |
| { |
| /* upper 4bits and 7, 11 are write-as-0 */ |
| val &= 0xffff77f; |
| asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); |
| } |
| |
| static inline int |
| xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, |
| enum xscale_counters counter) |
| { |
| int ret = 0; |
| |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; |
| break; |
| case XSCALE_COUNTER0: |
| ret = pmnc & XSCALE1_COUNT0_OVERFLOW; |
| break; |
| case XSCALE_COUNTER1: |
| ret = pmnc & XSCALE1_COUNT1_OVERFLOW; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", counter); |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t |
| xscale1pmu_handle_irq(int irq_num, void *dev) |
| { |
| unsigned long pmnc; |
| struct perf_sample_data data; |
| struct cpu_hw_events *cpuc; |
| struct pt_regs *regs; |
| int idx; |
| |
| /* |
| * NOTE: there's an A stepping erratum that states if an overflow |
| * bit already exists and another occurs, the previous |
| * Overflow bit gets cleared. There's no workaround. |
| * Fixed in B stepping or later. |
| */ |
| pmnc = xscale1pmu_read_pmnc(); |
| |
| /* |
| * Write the value back to clear the overflow flags. Overflow |
| * flags remain in pmnc for use below. We also disable the PMU |
| * while we process the interrupt. |
| */ |
| xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); |
| |
| if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) |
| return IRQ_NONE; |
| |
| regs = get_irq_regs(); |
| |
| perf_sample_data_init(&data, 0); |
| |
| cpuc = &__get_cpu_var(cpu_hw_events); |
| for (idx = 0; idx <= armpmu->num_events; ++idx) { |
| struct perf_event *event = cpuc->events[idx]; |
| struct hw_perf_event *hwc; |
| |
| if (!test_bit(idx, cpuc->active_mask)) |
| continue; |
| |
| if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) |
| continue; |
| |
| hwc = &event->hw; |
| armpmu_event_update(event, hwc, idx, 1); |
| data.period = event->hw.last_period; |
| if (!armpmu_event_set_period(event, hwc, idx)) |
| continue; |
| |
| if (perf_event_overflow(event, 0, &data, regs)) |
| armpmu->disable(hwc, idx); |
| } |
| |
| irq_work_run(); |
| |
| /* |
| * Re-enable the PMU. |
| */ |
| pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; |
| xscale1pmu_write_pmnc(pmnc); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void |
| xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) |
| { |
| unsigned long val, mask, evt, flags; |
| |
| switch (idx) { |
| case XSCALE_CYCLE_COUNTER: |
| mask = 0; |
| evt = XSCALE1_CCOUNT_INT_EN; |
| break; |
| case XSCALE_COUNTER0: |
| mask = XSCALE1_COUNT0_EVT_MASK; |
| evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | |
| XSCALE1_COUNT0_INT_EN; |
| break; |
| case XSCALE_COUNTER1: |
| mask = XSCALE1_COUNT1_EVT_MASK; |
| evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | |
| XSCALE1_COUNT1_INT_EN; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| return; |
| } |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale1pmu_read_pmnc(); |
| val &= ~mask; |
| val |= evt; |
| xscale1pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static void |
| xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) |
| { |
| unsigned long val, mask, evt, flags; |
| |
| switch (idx) { |
| case XSCALE_CYCLE_COUNTER: |
| mask = XSCALE1_CCOUNT_INT_EN; |
| evt = 0; |
| break; |
| case XSCALE_COUNTER0: |
| mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; |
| evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER1: |
| mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; |
| evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| return; |
| } |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale1pmu_read_pmnc(); |
| val &= ~mask; |
| val |= evt; |
| xscale1pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static int |
| xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, |
| struct hw_perf_event *event) |
| { |
| if (XSCALE_PERFCTR_CCNT == event->config_base) { |
| if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) |
| return -EAGAIN; |
| |
| return XSCALE_CYCLE_COUNTER; |
| } else { |
| if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) |
| return XSCALE_COUNTER1; |
| |
| if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) |
| return XSCALE_COUNTER0; |
| |
| return -EAGAIN; |
| } |
| } |
| |
| static void |
| xscale1pmu_start(void) |
| { |
| unsigned long flags, val; |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale1pmu_read_pmnc(); |
| val |= XSCALE_PMU_ENABLE; |
| xscale1pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static void |
| xscale1pmu_stop(void) |
| { |
| unsigned long flags, val; |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale1pmu_read_pmnc(); |
| val &= ~XSCALE_PMU_ENABLE; |
| xscale1pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static inline u32 |
| xscale1pmu_read_counter(int counter) |
| { |
| u32 val = 0; |
| |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER0: |
| asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER1: |
| asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); |
| break; |
| } |
| |
| return val; |
| } |
| |
| static inline void |
| xscale1pmu_write_counter(int counter, u32 val) |
| { |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER0: |
| asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER1: |
| asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); |
| break; |
| } |
| } |
| |
| static const struct arm_pmu xscale1pmu = { |
| .id = ARM_PERF_PMU_ID_XSCALE1, |
| .name = "xscale1", |
| .handle_irq = xscale1pmu_handle_irq, |
| .enable = xscale1pmu_enable_event, |
| .disable = xscale1pmu_disable_event, |
| .read_counter = xscale1pmu_read_counter, |
| .write_counter = xscale1pmu_write_counter, |
| .get_event_idx = xscale1pmu_get_event_idx, |
| .start = xscale1pmu_start, |
| .stop = xscale1pmu_stop, |
| .cache_map = &xscale_perf_cache_map, |
| .event_map = &xscale_perf_map, |
| .raw_event_mask = 0xFF, |
| .num_events = 3, |
| .max_period = (1LLU << 32) - 1, |
| }; |
| |
| static const struct arm_pmu *__init xscale1pmu_init(void) |
| { |
| return &xscale1pmu; |
| } |
| |
| #define XSCALE2_OVERFLOWED_MASK 0x01f |
| #define XSCALE2_CCOUNT_OVERFLOW 0x001 |
| #define XSCALE2_COUNT0_OVERFLOW 0x002 |
| #define XSCALE2_COUNT1_OVERFLOW 0x004 |
| #define XSCALE2_COUNT2_OVERFLOW 0x008 |
| #define XSCALE2_COUNT3_OVERFLOW 0x010 |
| #define XSCALE2_CCOUNT_INT_EN 0x001 |
| #define XSCALE2_COUNT0_INT_EN 0x002 |
| #define XSCALE2_COUNT1_INT_EN 0x004 |
| #define XSCALE2_COUNT2_INT_EN 0x008 |
| #define XSCALE2_COUNT3_INT_EN 0x010 |
| #define XSCALE2_COUNT0_EVT_SHFT 0 |
| #define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) |
| #define XSCALE2_COUNT1_EVT_SHFT 8 |
| #define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) |
| #define XSCALE2_COUNT2_EVT_SHFT 16 |
| #define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) |
| #define XSCALE2_COUNT3_EVT_SHFT 24 |
| #define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) |
| |
| static inline u32 |
| xscale2pmu_read_pmnc(void) |
| { |
| u32 val; |
| asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); |
| /* bits 1-2 and 4-23 are read-unpredictable */ |
| return val & 0xff000009; |
| } |
| |
| static inline void |
| xscale2pmu_write_pmnc(u32 val) |
| { |
| /* bits 4-23 are write-as-0, 24-31 are write ignored */ |
| val &= 0xf; |
| asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); |
| } |
| |
| static inline u32 |
| xscale2pmu_read_overflow_flags(void) |
| { |
| u32 val; |
| asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); |
| return val; |
| } |
| |
| static inline void |
| xscale2pmu_write_overflow_flags(u32 val) |
| { |
| asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); |
| } |
| |
| static inline u32 |
| xscale2pmu_read_event_select(void) |
| { |
| u32 val; |
| asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); |
| return val; |
| } |
| |
| static inline void |
| xscale2pmu_write_event_select(u32 val) |
| { |
| asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); |
| } |
| |
| static inline u32 |
| xscale2pmu_read_int_enable(void) |
| { |
| u32 val; |
| asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); |
| return val; |
| } |
| |
| static void |
| xscale2pmu_write_int_enable(u32 val) |
| { |
| asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); |
| } |
| |
| static inline int |
| xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, |
| enum xscale_counters counter) |
| { |
| int ret = 0; |
| |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; |
| break; |
| case XSCALE_COUNTER0: |
| ret = of_flags & XSCALE2_COUNT0_OVERFLOW; |
| break; |
| case XSCALE_COUNTER1: |
| ret = of_flags & XSCALE2_COUNT1_OVERFLOW; |
| break; |
| case XSCALE_COUNTER2: |
| ret = of_flags & XSCALE2_COUNT2_OVERFLOW; |
| break; |
| case XSCALE_COUNTER3: |
| ret = of_flags & XSCALE2_COUNT3_OVERFLOW; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", counter); |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t |
| xscale2pmu_handle_irq(int irq_num, void *dev) |
| { |
| unsigned long pmnc, of_flags; |
| struct perf_sample_data data; |
| struct cpu_hw_events *cpuc; |
| struct pt_regs *regs; |
| int idx; |
| |
| /* Disable the PMU. */ |
| pmnc = xscale2pmu_read_pmnc(); |
| xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); |
| |
| /* Check the overflow flag register. */ |
| of_flags = xscale2pmu_read_overflow_flags(); |
| if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) |
| return IRQ_NONE; |
| |
| /* Clear the overflow bits. */ |
| xscale2pmu_write_overflow_flags(of_flags); |
| |
| regs = get_irq_regs(); |
| |
| perf_sample_data_init(&data, 0); |
| |
| cpuc = &__get_cpu_var(cpu_hw_events); |
| for (idx = 0; idx <= armpmu->num_events; ++idx) { |
| struct perf_event *event = cpuc->events[idx]; |
| struct hw_perf_event *hwc; |
| |
| if (!test_bit(idx, cpuc->active_mask)) |
| continue; |
| |
| if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) |
| continue; |
| |
| hwc = &event->hw; |
| armpmu_event_update(event, hwc, idx, 1); |
| data.period = event->hw.last_period; |
| if (!armpmu_event_set_period(event, hwc, idx)) |
| continue; |
| |
| if (perf_event_overflow(event, 0, &data, regs)) |
| armpmu->disable(hwc, idx); |
| } |
| |
| irq_work_run(); |
| |
| /* |
| * Re-enable the PMU. |
| */ |
| pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; |
| xscale2pmu_write_pmnc(pmnc); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void |
| xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) |
| { |
| unsigned long flags, ien, evtsel; |
| |
| ien = xscale2pmu_read_int_enable(); |
| evtsel = xscale2pmu_read_event_select(); |
| |
| switch (idx) { |
| case XSCALE_CYCLE_COUNTER: |
| ien |= XSCALE2_CCOUNT_INT_EN; |
| break; |
| case XSCALE_COUNTER0: |
| ien |= XSCALE2_COUNT0_INT_EN; |
| evtsel &= ~XSCALE2_COUNT0_EVT_MASK; |
| evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER1: |
| ien |= XSCALE2_COUNT1_INT_EN; |
| evtsel &= ~XSCALE2_COUNT1_EVT_MASK; |
| evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER2: |
| ien |= XSCALE2_COUNT2_INT_EN; |
| evtsel &= ~XSCALE2_COUNT2_EVT_MASK; |
| evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER3: |
| ien |= XSCALE2_COUNT3_INT_EN; |
| evtsel &= ~XSCALE2_COUNT3_EVT_MASK; |
| evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| return; |
| } |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| xscale2pmu_write_event_select(evtsel); |
| xscale2pmu_write_int_enable(ien); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static void |
| xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) |
| { |
| unsigned long flags, ien, evtsel; |
| |
| ien = xscale2pmu_read_int_enable(); |
| evtsel = xscale2pmu_read_event_select(); |
| |
| switch (idx) { |
| case XSCALE_CYCLE_COUNTER: |
| ien &= ~XSCALE2_CCOUNT_INT_EN; |
| break; |
| case XSCALE_COUNTER0: |
| ien &= ~XSCALE2_COUNT0_INT_EN; |
| evtsel &= ~XSCALE2_COUNT0_EVT_MASK; |
| evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER1: |
| ien &= ~XSCALE2_COUNT1_INT_EN; |
| evtsel &= ~XSCALE2_COUNT1_EVT_MASK; |
| evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER2: |
| ien &= ~XSCALE2_COUNT2_INT_EN; |
| evtsel &= ~XSCALE2_COUNT2_EVT_MASK; |
| evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; |
| break; |
| case XSCALE_COUNTER3: |
| ien &= ~XSCALE2_COUNT3_INT_EN; |
| evtsel &= ~XSCALE2_COUNT3_EVT_MASK; |
| evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; |
| break; |
| default: |
| WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| return; |
| } |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| xscale2pmu_write_event_select(evtsel); |
| xscale2pmu_write_int_enable(ien); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static int |
| xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, |
| struct hw_perf_event *event) |
| { |
| int idx = xscale1pmu_get_event_idx(cpuc, event); |
| if (idx >= 0) |
| goto out; |
| |
| if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) |
| idx = XSCALE_COUNTER3; |
| else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) |
| idx = XSCALE_COUNTER2; |
| out: |
| return idx; |
| } |
| |
| static void |
| xscale2pmu_start(void) |
| { |
| unsigned long flags, val; |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; |
| val |= XSCALE_PMU_ENABLE; |
| xscale2pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static void |
| xscale2pmu_stop(void) |
| { |
| unsigned long flags, val; |
| |
| raw_spin_lock_irqsave(&pmu_lock, flags); |
| val = xscale2pmu_read_pmnc(); |
| val &= ~XSCALE_PMU_ENABLE; |
| xscale2pmu_write_pmnc(val); |
| raw_spin_unlock_irqrestore(&pmu_lock, flags); |
| } |
| |
| static inline u32 |
| xscale2pmu_read_counter(int counter) |
| { |
| u32 val = 0; |
| |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER0: |
| asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER1: |
| asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER2: |
| asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); |
| break; |
| case XSCALE_COUNTER3: |
| asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); |
| break; |
| } |
| |
| return val; |
| } |
| |
| static inline void |
| xscale2pmu_write_counter(int counter, u32 val) |
| { |
| switch (counter) { |
| case XSCALE_CYCLE_COUNTER: |
| asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER0: |
| asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER1: |
| asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER2: |
| asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); |
| break; |
| case XSCALE_COUNTER3: |
| asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); |
| break; |
| } |
| } |
| |
| static const struct arm_pmu xscale2pmu = { |
| .id = ARM_PERF_PMU_ID_XSCALE2, |
| .name = "xscale2", |
| .handle_irq = xscale2pmu_handle_irq, |
| .enable = xscale2pmu_enable_event, |
| .disable = xscale2pmu_disable_event, |
| .read_counter = xscale2pmu_read_counter, |
| .write_counter = xscale2pmu_write_counter, |
| .get_event_idx = xscale2pmu_get_event_idx, |
| .start = xscale2pmu_start, |
| .stop = xscale2pmu_stop, |
| .cache_map = &xscale_perf_cache_map, |
| .event_map = &xscale_perf_map, |
| .raw_event_mask = 0xFF, |
| .num_events = 5, |
| .max_period = (1LLU << 32) - 1, |
| }; |
| |
| static const struct arm_pmu *__init xscale2pmu_init(void) |
| { |
| return &xscale2pmu; |
| } |
| #else |
| static const struct arm_pmu *__init xscale1pmu_init(void) |
| { |
| return NULL; |
| } |
| |
| static const struct arm_pmu *__init xscale2pmu_init(void) |
| { |
| return NULL; |
| } |
| #endif /* CONFIG_CPU_XSCALE */ |