arch/arm/mach-nomadik/board-nhk8815.c - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  *  linux/arch/arm/mach-nomadik/board-8815nhk.c
  *
  *  Copyright (C) STMicroelectronics
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
  * published by the Free Software Foundation.
  *
  *  NHK15 board specifc driver definition
  */
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/fsmc.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 #include <mach/irqs.h>

 #include "cpu-8815.h"

 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000

 #define ALE_OFF 0x1000000
 #define CLE_OFF 0x800000

 /* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_data",
 		.start = 0x40000000,
 		.end = 0x40000000 + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.name = "nand_addr",
 		.start = 0x40000000 + ALE_OFF,
 		.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.name = "nand_cmd",
 		.start = 0x40000000 + CLE_OFF,
 		.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.name  = "fsmc_regs",
 		.start = NOMADIK_FSMC_BASE,
 		.end   = NOMADIK_FSMC_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };

 /*
  * These partitions are the same as those used in the 2.6.20 release
  * shipped by the vendor; the first two partitions are mandated
  * by the boot ROM, and the bootloader area is somehow oversized...
  */
 static struct mtd_partition nhk8815_partitions[] = {
 	{
 		.name	= "X-Loader(NAND)",
 		.offset = 0,
 		.size	= SZ_256K,
 	}, {
 		.name	= "MemInit(NAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= SZ_256K,
 	}, {
 		.name	= "BootLoader(NAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= SZ_2M,
 	}, {
 		.name	= "Kernel zImage(NAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= 3 * SZ_1M,
 	}, {
 		.name	= "Root Filesystem(NAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= 22 * SZ_1M,
 	}, {
 		.name	= "User Filesystem(NAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL,
 	}
 };

 static struct fsmc_nand_timings nhk8815_nand_timings = {
 	.thiz	= 0,
 	.thold	= 0x10,
 	.twait	= 0x0A,
 	.tset	= 0,
 };

 static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
 	.nand_timings = &nhk8815_nand_timings,
 	.partitions = nhk8815_partitions,
 	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
 	.width = FSMC_NAND_BW8,
 };

 static struct platform_device nhk8815_nand_device = {
 	.name = "fsmc-nand",
 	.id = -1,
 	.resource = nhk8815_nand_resources,
 	.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
 	.dev = {
 		.platform_data = &nhk8815_nand_platform_data,
 	},
 };

 /* These are the partitions for the OneNand device, different from above */
 static struct mtd_partition nhk8815_onenand_partitions[] = {
 	{
 		.name	= "X-Loader(OneNAND)",
 		.offset = 0,
 		.size	= SZ_256K,
 	}, {
 		.name	= "MemInit(OneNAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= SZ_256K,
 	}, {
 		.name	= "BootLoader(OneNAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= SZ_2M-SZ_256K,
 	}, {
 		.name	= "SysImage(OneNAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= 4 * SZ_1M,
 	}, {
 		.name	= "Root Filesystem(OneNAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= 22 * SZ_1M,
 	}, {
 		.name	= "User Filesystem(OneNAND)",
 		.offset	= MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL,
 	}
 };

 static struct onenand_platform_data nhk8815_onenand_data = {
 	.parts		= nhk8815_onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
 };

 static struct resource nhk8815_onenand_resource[] = {
 	{
 		.start		= 0x30000000,
 		.end		= 0x30000000 + SZ_128K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };

 static struct platform_device nhk8815_onenand_device = {
 	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &nhk8815_onenand_data,
 	},
 	.resource	= nhk8815_onenand_resource,
 	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
 };

 /* bus control reg. and bus timing reg. for CS0..CS3 */
 #define FSMC_BCR(x)	(NOMADIK_FSMC_VA + (x << 3))
 #define FSMC_BTR(x)	(NOMADIK_FSMC_VA + (x << 3) + 0x04)

 static void __init nhk8815_onenand_init(void)
 {
 #ifdef CONFIG_MTD_ONENAND
        /* Set up SMCS0 for OneNand */
 	writel(0x000030db, FSMC_BCR(0));
 	writel(0x02100551, FSMC_BTR(0));
 #endif
 }

 static struct mmci_platform_data mmcsd_plat_data = {
 	.ocr_mask = MMC_VDD_29_30,
 	.f_max = 48000000,
 	.gpio_wp = -1,
 	.gpio_cd = 111,
 	.cd_invert = true,
 	.capabilities = MMC_CAP_MMC_HIGHSPEED |
 	MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
 };

 static int __init nhk8815_mmcsd_init(void)
 {
 	int ret;

 	ret = gpio_request(112, "card detect bias");
 	if (ret)
 		return ret;
 	gpio_direction_output(112, 0);
 	amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
 	return 0;
 }
 module_init(nhk8815_mmcsd_init);

 static struct resource nhk8815_eth_resources[] = {
 	{
 		.name = "smc91x-regs",
 		.start = 0x34000000 + 0x300,
 		.end = 0x34000000 + SZ_64K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = NOMADIK_GPIO_TO_IRQ(115),
 		.end = NOMADIK_GPIO_TO_IRQ(115),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	}
 };

 static struct platform_device nhk8815_eth_device = {
 	.name = "smc91x",
 	.resource = nhk8815_eth_resources,
 	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
 };

 static int __init nhk8815_eth_init(void)
 {
 	int gpio_nr = 115; /* hardwired in the board */
 	int err;

 	err = gpio_request(gpio_nr, "eth_irq");
 	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
 	if (!err) err = gpio_direction_input(gpio_nr);
 	if (err)
 		pr_err("Error %i in %s\n", err, __func__);
 	return err;
 }
 device_initcall(nhk8815_eth_init);

 static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	&nhk8815_nand_device,
 	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };

 static void __init nomadik_timer_init(void)
 {
 	u32 src_cr;

 	/* Configure timer sources in "system reset controller" ctrl reg */
 	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
 	src_cr &= SRC_CR_INIT_MASK;
 	src_cr |= SRC_CR_INIT_VAL;
 	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));

 	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
 }

 static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("stw4811", 0x2d),
 	},
 };

 static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
 	{
 		I2C_BOARD_INFO("camera", 0x10),
 	},
 	{
 		I2C_BOARD_INFO("stw5095", 0x1a),
 	},
 	{
 		I2C_BOARD_INFO("lis3lv02dl", 0x1d),
 	},
 };

 static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
 	{
 		I2C_BOARD_INFO("stw4811-usb", 0x2d),
 	},
 };

 static unsigned long out_low[] = { PIN_OUTPUT_LOW };
 static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
 static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
 static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };

 static struct pinctrl_map __initdata nhk8815_pinmap[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
 	/* Hog in MMC/SD card mux */
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
 	/* MCCLK */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
 	/* MCCMD */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
 	/* MCCMDDIR */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
 	/* MCDAT3-0 */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
 	/* MCDAT0DIR */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
 	/* MCDAT31DIR */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
 	/* MCMSFBCLK */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
 	/* CD input GPIO */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
 	/* CD bias drive */
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
 };

 static void __init nhk8815_platform_init(void)
 {
 	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
 	cpu8815_platform_init();
 	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));

 	amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
 	amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);

 	i2c_register_board_info(0, nhk8815_i2c0_devices,
 				ARRAY_SIZE(nhk8815_i2c0_devices));
 	i2c_register_board_info(1, nhk8815_i2c1_devices,
 				ARRAY_SIZE(nhk8815_i2c1_devices));
 	i2c_register_board_info(2, nhk8815_i2c2_devices,
 				ARRAY_SIZE(nhk8815_i2c2_devices));
 }

 MACHINE_START(NOMADIK, "NHK8815")
 	/* Maintainer: ST MicroElectronics */
 	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
 	.init_time	= nomadik_timer_init,
 	.init_machine	= nhk8815_platform_init,
 	.restart	= cpu8815_restart,
 MACHINE_END
	/*
	* linux/arch/arm/mach-nomadik/board-8815nhk.c
	*
	* Copyright (C) STMicroelectronics
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2, as
	* published by the Free Software Foundation.
	*
	* NHK15 board specifc driver definition
	*/
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/amba/bus.h>
	#include <linux/amba/mmci.h>
	#include <linux/interrupt.h>
	#include <linux/gpio.h>
	#include <linux/mtd/mtd.h>
	#include <linux/mtd/nand.h>
	#include <linux/mtd/fsmc.h>
	#include <linux/mtd/onenand.h>
	#include <linux/mtd/partitions.h>
	#include <linux/i2c.h>
	#include <linux/io.h>
	#include <linux/pinctrl/machine.h>
	#include <linux/platform_data/pinctrl-nomadik.h>
	#include <linux/platform_data/clocksource-nomadik-mtu.h>
	#include <asm/sizes.h>
	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/flash.h>
	#include <asm/mach/time.h>
	#include <mach/irqs.h>

	#include "cpu-8815.h"

	/* Initial value for SRC control register: all timers use MXTAL/8 source */
	#define SRC_CR_INIT_MASK 0x00007fff
	#define SRC_CR_INIT_VAL 0x2aaa8000

	#define ALE_OFF 0x1000000
	#define CLE_OFF 0x800000

	/* These addresses span 16MB, so use three individual pages */
	static struct resource nhk8815_nand_resources[] = {
	{
	.name = "nand_data",
	.start = 0x40000000,
	.end = 0x40000000 + SZ_16K - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.name = "nand_addr",
	.start = 0x40000000 + ALE_OFF,
	.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.name = "nand_cmd",
	.start = 0x40000000 + CLE_OFF,
	.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.name = "fsmc_regs",
	.start = NOMADIK_FSMC_BASE,
	.end = NOMADIK_FSMC_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	/*
	* These partitions are the same as those used in the 2.6.20 release
	* shipped by the vendor; the first two partitions are mandated
	* by the boot ROM, and the bootloader area is somehow oversized...
	*/
	static struct mtd_partition nhk8815_partitions[] = {
	{
	.name = "X-Loader(NAND)",
	.offset = 0,
	.size = SZ_256K,
	}, {
	.name = "MemInit(NAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = SZ_256K,
	}, {
	.name = "BootLoader(NAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = SZ_2M,
	}, {
	.name = "Kernel zImage(NAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = 3 * SZ_1M,
	}, {
	.name = "Root Filesystem(NAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = 22 * SZ_1M,
	}, {
	.name = "User Filesystem(NAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = MTDPART_SIZ_FULL,
	}
	};

	static struct fsmc_nand_timings nhk8815_nand_timings = {
	.thiz = 0,
	.thold = 0x10,
	.twait = 0x0A,
	.tset = 0,
	};

	static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
	.nand_timings = &nhk8815_nand_timings,
	.partitions = nhk8815_partitions,
	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
	.width = FSMC_NAND_BW8,
	};

	static struct platform_device nhk8815_nand_device = {
	.name = "fsmc-nand",
	.id = -1,
	.resource = nhk8815_nand_resources,
	.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
	.dev = {
	.platform_data = &nhk8815_nand_platform_data,
	},
	};

	/* These are the partitions for the OneNand device, different from above */
	static struct mtd_partition nhk8815_onenand_partitions[] = {
	{
	.name = "X-Loader(OneNAND)",
	.offset = 0,
	.size = SZ_256K,
	}, {
	.name = "MemInit(OneNAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = SZ_256K,
	}, {
	.name = "BootLoader(OneNAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = SZ_2M-SZ_256K,
	}, {
	.name = "SysImage(OneNAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = 4 * SZ_1M,
	}, {
	.name = "Root Filesystem(OneNAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = 22 * SZ_1M,
	}, {
	.name = "User Filesystem(OneNAND)",
	.offset = MTDPART_OFS_APPEND,
	.size = MTDPART_SIZ_FULL,
	}
	};

	static struct onenand_platform_data nhk8815_onenand_data = {
	.parts = nhk8815_onenand_partitions,
	.nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions),
	};

	static struct resource nhk8815_onenand_resource[] = {
	{
	.start = 0x30000000,
	.end = 0x30000000 + SZ_128K - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device nhk8815_onenand_device = {
	.name = "onenand-flash",
	.id = -1,
	.dev = {
	.platform_data = &nhk8815_onenand_data,
	},
	.resource = nhk8815_onenand_resource,
	.num_resources = ARRAY_SIZE(nhk8815_onenand_resource),
	};

	/* bus control reg. and bus timing reg. for CS0..CS3 */
	#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
	#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)

	static void __init nhk8815_onenand_init(void)
	{
	#ifdef CONFIG_MTD_ONENAND
	/* Set up SMCS0 for OneNand */
	writel(0x000030db, FSMC_BCR(0));
	writel(0x02100551, FSMC_BTR(0));
	#endif
	}

	static struct mmci_platform_data mmcsd_plat_data = {
	.ocr_mask = MMC_VDD_29_30,
	.f_max = 48000000,
	.gpio_wp = -1,
	.gpio_cd = 111,
	.cd_invert = true,
	.capabilities = MMC_CAP_MMC_HIGHSPEED \|
	MMC_CAP_SD_HIGHSPEED \| MMC_CAP_4_BIT_DATA,
	};

	static int __init nhk8815_mmcsd_init(void)
	{
	int ret;

	ret = gpio_request(112, "card detect bias");
	if (ret)
	return ret;
	gpio_direction_output(112, 0);
	amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
	return 0;
	}
	module_init(nhk8815_mmcsd_init);

	static struct resource nhk8815_eth_resources[] = {
	{
	.name = "smc91x-regs",
	.start = 0x34000000 + 0x300,
	.end = 0x34000000 + SZ_64K - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.start = NOMADIK_GPIO_TO_IRQ(115),
	.end = NOMADIK_GPIO_TO_IRQ(115),
	.flags = IORESOURCE_IRQ \| IRQF_TRIGGER_RISING,
	}
	};

	static struct platform_device nhk8815_eth_device = {
	.name = "smc91x",
	.resource = nhk8815_eth_resources,
	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
	};

	static int __init nhk8815_eth_init(void)
	{
	int gpio_nr = 115; /* hardwired in the board */
	int err;

	err = gpio_request(gpio_nr, "eth_irq");
	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
	if (!err) err = gpio_direction_input(gpio_nr);
	if (err)
	pr_err("Error %i in %s\n", err, __func__);
	return err;
	}
	device_initcall(nhk8815_eth_init);

	static struct platform_device *nhk8815_platform_devices[] __initdata = {
	&nhk8815_nand_device,
	&nhk8815_onenand_device,
	&nhk8815_eth_device,
	/* will add more devices */
	};

	static void __init nomadik_timer_init(void)
	{
	u32 src_cr;

	/* Configure timer sources in "system reset controller" ctrl reg */
	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
	src_cr &= SRC_CR_INIT_MASK;
	src_cr \|= SRC_CR_INIT_VAL;
	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));

	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
	}

	static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
	{
	I2C_BOARD_INFO("stw4811", 0x2d),
	},
	};

	static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
	{
	I2C_BOARD_INFO("camera", 0x10),
	},
	{
	I2C_BOARD_INFO("stw5095", 0x1a),
	},
	{
	I2C_BOARD_INFO("lis3lv02dl", 0x1d),
	},
	};

	static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
	{
	I2C_BOARD_INFO("stw4811-usb", 0x2d),
	},
	};

	static unsigned long out_low[] = { PIN_OUTPUT_LOW };
	static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
	static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
	static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };

	static struct pinctrl_map __initdata nhk8815_pinmap[] = {
	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
	/* Hog in MMC/SD card mux */
	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
	/* MCCLK */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
	/* MCCMD */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
	/* MCCMDDIR */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
	/* MCDAT3-0 */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
	/* MCDAT0DIR */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
	/* MCDAT31DIR */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
	/* MCMSFBCLK */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
	/* CD input GPIO */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
	/* CD bias drive */
	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
	};

	static void __init nhk8815_platform_init(void)
	{
	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
	cpu8815_platform_init();
	nhk8815_onenand_init();
	platform_add_devices(nhk8815_platform_devices,
	ARRAY_SIZE(nhk8815_platform_devices));

	amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
	amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);

	i2c_register_board_info(0, nhk8815_i2c0_devices,
	ARRAY_SIZE(nhk8815_i2c0_devices));
	i2c_register_board_info(1, nhk8815_i2c1_devices,
	ARRAY_SIZE(nhk8815_i2c1_devices));
	i2c_register_board_info(2, nhk8815_i2c2_devices,
	ARRAY_SIZE(nhk8815_i2c2_devices));
	}

	MACHINE_START(NOMADIK, "NHK8815")
	/* Maintainer: ST MicroElectronics */
	.atag_offset = 0x100,
	.map_io = cpu8815_map_io,
	.init_irq = cpu8815_init_irq,
	.init_time = nomadik_timer_init,
	.init_machine = nhk8815_platform_init,
	.restart = cpu8815_restart,
	MACHINE_END