| /* |
| * Header file required by picodlp panel driver |
| * |
| * Copyright (C) 2009-2011 Texas Instruments |
| * Author: Mythri P K <mythripk@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H |
| #define __OMAP2_DISPLAY_PANEL_PICODLP_H |
| |
| /* Commands used for configuring picodlp panel */ |
| |
| #define MAIN_STATUS 0x03 |
| #define PBC_CONTROL 0x08 |
| #define INPUT_SOURCE 0x0B |
| #define INPUT_RESOLUTION 0x0C |
| #define DATA_FORMAT 0x0D |
| #define IMG_ROTATION 0x0E |
| #define LONG_FLIP 0x0F |
| #define SHORT_FLIP 0x10 |
| #define TEST_PAT_SELECT 0x11 |
| #define R_DRIVE_CURRENT 0x12 |
| #define G_DRIVE_CURRENT 0x13 |
| #define B_DRIVE_CURRENT 0x14 |
| #define READ_REG_SELECT 0x15 |
| #define RGB_DRIVER_ENABLE 0x16 |
| |
| #define CPU_IF_MODE 0x18 |
| #define FRAME_RATE 0x19 |
| #define CPU_IF_SYNC_METHOD 0x1A |
| #define CPU_IF_SOF 0x1B |
| #define CPU_IF_EOF 0x1C |
| #define CPU_IF_SLEEP 0x1D |
| |
| #define SEQUENCE_MODE 0x1E |
| #define SOFT_RESET 0x1F |
| #define FRONT_END_RESET 0x21 |
| #define AUTO_PWR_ENABLE 0x22 |
| |
| #define VSYNC_LINE_DELAY 0x23 |
| #define CPU_PI_HORIZ_START 0x24 |
| #define CPU_PI_VERT_START 0x25 |
| #define CPU_PI_HORIZ_WIDTH 0x26 |
| #define CPU_PI_VERT_HEIGHT 0x27 |
| |
| #define PIXEL_MASK_CROP 0x28 |
| #define CROP_FIRST_LINE 0x29 |
| #define CROP_LAST_LINE 0x2A |
| #define CROP_FIRST_PIXEL 0x2B |
| #define CROP_LAST_PIXEL 0x2C |
| #define DMD_PARK_TRIGGER 0x2D |
| |
| #define MISC_REG 0x30 |
| |
| /* AGC registers */ |
| #define AGC_CTRL 0x50 |
| #define AGC_CLIPPED_PIXS 0x55 |
| #define AGC_BRIGHT_PIXS 0x56 |
| #define AGC_BG_PIXS 0x57 |
| #define AGC_SAFETY_MARGIN 0x17 |
| |
| /* Color Coordinate Adjustment registers */ |
| #define CCA_ENABLE 0x5E |
| #define CCA_C1A 0x5F |
| #define CCA_C1B 0x60 |
| #define CCA_C1C 0x61 |
| #define CCA_C2A 0x62 |
| #define CCA_C2B 0x63 |
| #define CCA_C2C 0x64 |
| #define CCA_C3A 0x65 |
| #define CCA_C3B 0x66 |
| #define CCA_C3C 0x67 |
| #define CCA_C7A 0x71 |
| #define CCA_C7B 0x72 |
| #define CCA_C7C 0x73 |
| |
| /** |
| * DLP Pico Processor 2600 comes with flash |
| * We can do DMA operations from flash for accessing Look Up Tables |
| */ |
| #define DMA_STATUS 0x100 |
| #define FLASH_ADDR_BYTES 0x74 |
| #define FLASH_DUMMY_BYTES 0x75 |
| #define FLASH_WRITE_BYTES 0x76 |
| #define FLASH_READ_BYTES 0x77 |
| #define FLASH_OPCODE 0x78 |
| #define FLASH_START_ADDR 0x79 |
| #define FLASH_DUMMY2 0x7A |
| #define FLASH_WRITE_DATA 0x7B |
| |
| #define TEMPORAL_DITH_DISABLE 0x7E |
| #define SEQ_CONTROL 0x82 |
| #define SEQ_VECTOR 0x83 |
| |
| /* DMD is Digital Micromirror Device */ |
| #define DMD_BLOCK_COUNT 0x84 |
| #define DMD_VCC_CONTROL 0x86 |
| #define DMD_PARK_PULSE_COUNT 0x87 |
| #define DMD_PARK_PULSE_WIDTH 0x88 |
| #define DMD_PARK_DELAY 0x89 |
| #define DMD_SHADOW_ENABLE 0x8E |
| #define SEQ_STATUS 0x8F |
| #define FLASH_CLOCK_CONTROL 0x98 |
| #define DMD_PARK 0x2D |
| |
| #define SDRAM_BIST_ENABLE 0x46 |
| #define DDR_DRIVER_STRENGTH 0x9A |
| #define SDC_ENABLE 0x9D |
| #define SDC_BUFF_SWAP_DISABLE 0xA3 |
| #define CURTAIN_CONTROL 0xA6 |
| #define DDR_BUS_SWAP_ENABLE 0xA7 |
| #define DMD_TRC_ENABLE 0xA8 |
| #define DMD_BUS_SWAP_ENABLE 0xA9 |
| |
| #define ACTGEN_ENABLE 0xAE |
| #define ACTGEN_CONTROL 0xAF |
| #define ACTGEN_HORIZ_BP 0xB0 |
| #define ACTGEN_VERT_BP 0xB1 |
| |
| /* Look Up Table access */ |
| #define CMT_SPLASH_LUT_START_ADDR 0xFA |
| #define CMT_SPLASH_LUT_DEST_SELECT 0xFB |
| #define CMT_SPLASH_LUT_DATA 0xFC |
| #define SEQ_RESET_LUT_START_ADDR 0xFD |
| #define SEQ_RESET_LUT_DEST_SELECT 0xFE |
| #define SEQ_RESET_LUT_DATA 0xFF |
| |
| /* Input source definitions */ |
| #define PARALLEL_RGB 0 |
| #define INT_TEST_PATTERN 1 |
| #define SPLASH_SCREEN 2 |
| #define CPU_INTF 3 |
| #define BT656 4 |
| |
| /* Standard input resolution definitions */ |
| #define QWVGA_LANDSCAPE 3 /* (427h*240v) */ |
| #define WVGA_864_LANDSCAPE 21 /* (864h*480v) */ |
| #define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */ |
| |
| /* Standard data format definitions */ |
| #define RGB565 0 |
| #define RGB666 1 |
| #define RGB888 2 |
| |
| /* Test Pattern definitions */ |
| #define TPG_CHECKERBOARD 0 |
| #define TPG_BLACK 1 |
| #define TPG_WHITE 2 |
| #define TPG_RED 3 |
| #define TPG_BLUE 4 |
| #define TPG_GREEN 5 |
| #define TPG_VLINES_BLACK 6 |
| #define TPG_HLINES_BLACK 7 |
| #define TPG_VLINES_ALT 8 |
| #define TPG_HLINES_ALT 9 |
| #define TPG_DIAG_LINES 10 |
| #define TPG_GREYRAMP_VERT 11 |
| #define TPG_GREYRAMP_HORIZ 12 |
| #define TPG_ANSI_CHECKERBOARD 13 |
| |
| /* sequence mode definitions */ |
| #define SEQ_FREE_RUN 0 |
| #define SEQ_LOCK 1 |
| |
| /* curtain color definitions */ |
| #define CURTAIN_BLACK 0 |
| #define CURTAIN_RED 1 |
| #define CURTAIN_GREEN 2 |
| #define CURTAIN_BLUE 3 |
| #define CURTAIN_YELLOW 4 |
| #define CURTAIN_MAGENTA 5 |
| #define CURTAIN_CYAN 6 |
| #define CURTAIN_WHITE 7 |
| |
| /* LUT definitions */ |
| #define CMT_LUT_NONE 0 |
| #define CMT_LUT_GREEN 1 |
| #define CMT_LUT_RED 2 |
| #define CMT_LUT_BLUE 3 |
| #define CMT_LUT_ALL 4 |
| #define SPLASH_LUT 5 |
| |
| #define SEQ_LUT_NONE 0 |
| #define SEQ_DRC_LUT_0 1 |
| #define SEQ_DRC_LUT_1 2 |
| #define SEQ_DRC_LUT_2 3 |
| #define SEQ_DRC_LUT_3 4 |
| #define SEQ_SEQ_LUT 5 |
| #define SEQ_DRC_LUT_ALL 6 |
| #define WPC_PROGRAM_LUT 7 |
| |
| #define BITSTREAM_START_ADDR 0x00000000 |
| #define BITSTREAM_SIZE 0x00040000 |
| |
| #define WPC_FW_0_START_ADDR 0x00040000 |
| #define WPC_FW_0_SIZE 0x00000ce8 |
| |
| #define SEQUENCE_0_START_ADDR 0x00044000 |
| #define SEQUENCE_0_SIZE 0x00001000 |
| |
| #define SEQUENCE_1_START_ADDR 0x00045000 |
| #define SEQUENCE_1_SIZE 0x00000d10 |
| |
| #define SEQUENCE_2_START_ADDR 0x00046000 |
| #define SEQUENCE_2_SIZE 0x00000d10 |
| |
| #define SEQUENCE_3_START_ADDR 0x00047000 |
| #define SEQUENCE_3_SIZE 0x00000d10 |
| |
| #define SEQUENCE_4_START_ADDR 0x00048000 |
| #define SEQUENCE_4_SIZE 0x00000d10 |
| |
| #define SEQUENCE_5_START_ADDR 0x00049000 |
| #define SEQUENCE_5_SIZE 0x00000d10 |
| |
| #define SEQUENCE_6_START_ADDR 0x0004a000 |
| #define SEQUENCE_6_SIZE 0x00000d10 |
| |
| #define CMT_LUT_0_START_ADDR 0x0004b200 |
| #define CMT_LUT_0_SIZE 0x00000600 |
| |
| #define CMT_LUT_1_START_ADDR 0x0004b800 |
| #define CMT_LUT_1_SIZE 0x00000600 |
| |
| #define CMT_LUT_2_START_ADDR 0x0004be00 |
| #define CMT_LUT_2_SIZE 0x00000600 |
| |
| #define CMT_LUT_3_START_ADDR 0x0004c400 |
| #define CMT_LUT_3_SIZE 0x00000600 |
| |
| #define CMT_LUT_4_START_ADDR 0x0004ca00 |
| #define CMT_LUT_4_SIZE 0x00000600 |
| |
| #define CMT_LUT_5_START_ADDR 0x0004d000 |
| #define CMT_LUT_5_SIZE 0x00000600 |
| |
| #define CMT_LUT_6_START_ADDR 0x0004d600 |
| #define CMT_LUT_6_SIZE 0x00000600 |
| |
| #define DRC_TABLE_0_START_ADDR 0x0004dc00 |
| #define DRC_TABLE_0_SIZE 0x00000100 |
| |
| #define SPLASH_0_START_ADDR 0x0004dd00 |
| #define SPLASH_0_SIZE 0x00032280 |
| |
| #define SEQUENCE_7_START_ADDR 0x00080000 |
| #define SEQUENCE_7_SIZE 0x00000d10 |
| |
| #define SEQUENCE_8_START_ADDR 0x00081800 |
| #define SEQUENCE_8_SIZE 0x00000d10 |
| |
| #define SEQUENCE_9_START_ADDR 0x00083000 |
| #define SEQUENCE_9_SIZE 0x00000d10 |
| |
| #define CMT_LUT_7_START_ADDR 0x0008e000 |
| #define CMT_LUT_7_SIZE 0x00000600 |
| |
| #define CMT_LUT_8_START_ADDR 0x0008e800 |
| #define CMT_LUT_8_SIZE 0x00000600 |
| |
| #define CMT_LUT_9_START_ADDR 0x0008f000 |
| #define CMT_LUT_9_SIZE 0x00000600 |
| |
| #define SPLASH_1_START_ADDR 0x0009a000 |
| #define SPLASH_1_SIZE 0x00032280 |
| |
| #define SPLASH_2_START_ADDR 0x000cd000 |
| #define SPLASH_2_SIZE 0x00032280 |
| |
| #define SPLASH_3_START_ADDR 0x00100000 |
| #define SPLASH_3_SIZE 0x00032280 |
| |
| #define OPT_SPLASH_0_START_ADDR 0x00134000 |
| #define OPT_SPLASH_0_SIZE 0x000cb100 |
| |
| #endif |