| /* |
| * linux/kernel/irq/spurious.c |
| * |
| * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar |
| * |
| * This file contains spurious interrupt handling. |
| */ |
| |
| #include <linux/jiffies.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/kallsyms.h> |
| #include <linux/interrupt.h> |
| #include <linux/moduleparam.h> |
| #include <linux/timer.h> |
| |
| #include "internals.h" |
| |
| static int irqfixup __read_mostly; |
| |
| #define POLL_SPURIOUS_IRQ_INTERVAL (HZ/10) |
| static void poll_spurious_irqs(unsigned long dummy); |
| static DEFINE_TIMER(poll_spurious_irq_timer, poll_spurious_irqs, 0, 0); |
| static int irq_poll_cpu; |
| static atomic_t irq_poll_active; |
| |
| /* |
| * We wait here for a poller to finish. |
| * |
| * If the poll runs on this CPU, then we yell loudly and return |
| * false. That will leave the interrupt line disabled in the worst |
| * case, but it should never happen. |
| * |
| * We wait until the poller is done and then recheck disabled and |
| * action (about to be disabled). Only if it's still active, we return |
| * true and let the handler run. |
| */ |
| bool irq_wait_for_poll(struct irq_desc *desc) |
| { |
| if (WARN_ONCE(irq_poll_cpu == smp_processor_id(), |
| "irq poll in progress on cpu %d for irq %d\n", |
| smp_processor_id(), desc->irq_data.irq)) |
| return false; |
| |
| #ifdef CONFIG_SMP |
| do { |
| raw_spin_unlock(&desc->lock); |
| while (irqd_irq_inprogress(&desc->irq_data)) |
| cpu_relax(); |
| raw_spin_lock(&desc->lock); |
| } while (irqd_irq_inprogress(&desc->irq_data)); |
| /* Might have been disabled in meantime */ |
| return !irqd_irq_disabled(&desc->irq_data) && desc->action; |
| #else |
| return false; |
| #endif |
| } |
| |
| |
| /* |
| * Recovery handler for misrouted interrupts. |
| */ |
| static int try_one_irq(int irq, struct irq_desc *desc, bool force) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| struct irqaction *action; |
| |
| raw_spin_lock(&desc->lock); |
| |
| /* PER_CPU and nested thread interrupts are never polled */ |
| if (irq_settings_is_per_cpu(desc) || irq_settings_is_nested_thread(desc)) |
| goto out; |
| |
| /* |
| * Do not poll disabled interrupts unless the spurious |
| * disabled poller asks explicitely. |
| */ |
| if (irqd_irq_disabled(&desc->irq_data) && !force) |
| goto out; |
| |
| /* |
| * All handlers must agree on IRQF_SHARED, so we test just the |
| * first. Check for action->next as well. |
| */ |
| action = desc->action; |
| if (!action || !(action->flags & IRQF_SHARED) || |
| (action->flags & __IRQF_TIMER) || |
| (action->handler(irq, action->dev_id) == IRQ_HANDLED) || |
| !action->next) |
| goto out; |
| |
| /* Already running on another processor */ |
| if (irqd_irq_inprogress(&desc->irq_data)) { |
| /* |
| * Already running: If it is shared get the other |
| * CPU to go looking for our mystery interrupt too |
| */ |
| desc->istate |= IRQS_PENDING; |
| goto out; |
| } |
| |
| /* Mark it poll in progress */ |
| desc->istate |= IRQS_POLL_INPROGRESS; |
| do { |
| if (handle_irq_event(desc) == IRQ_HANDLED) |
| ret = IRQ_HANDLED; |
| action = desc->action; |
| } while ((desc->istate & IRQS_PENDING) && action); |
| desc->istate &= ~IRQS_POLL_INPROGRESS; |
| out: |
| raw_spin_unlock(&desc->lock); |
| return ret == IRQ_HANDLED; |
| } |
| |
| static int misrouted_irq(int irq) |
| { |
| struct irq_desc *desc; |
| int i, ok = 0; |
| |
| if (atomic_inc_return(&irq_poll_active) != 1) |
| goto out; |
| |
| irq_poll_cpu = smp_processor_id(); |
| |
| for_each_irq_desc(i, desc) { |
| if (!i) |
| continue; |
| |
| if (i == irq) /* Already tried */ |
| continue; |
| |
| if (try_one_irq(i, desc, false)) |
| ok = 1; |
| } |
| out: |
| atomic_dec(&irq_poll_active); |
| /* So the caller can adjust the irq error counts */ |
| return ok; |
| } |
| |
| static void poll_spurious_irqs(unsigned long dummy) |
| { |
| struct irq_desc *desc; |
| int i; |
| |
| if (atomic_inc_return(&irq_poll_active) != 1) |
| goto out; |
| irq_poll_cpu = smp_processor_id(); |
| |
| for_each_irq_desc(i, desc) { |
| unsigned int state; |
| |
| if (!i) |
| continue; |
| |
| /* Racy but it doesn't matter */ |
| state = desc->istate; |
| barrier(); |
| if (!(state & IRQS_SPURIOUS_DISABLED)) |
| continue; |
| |
| local_irq_disable(); |
| try_one_irq(i, desc, true); |
| local_irq_enable(); |
| } |
| out: |
| atomic_dec(&irq_poll_active); |
| mod_timer(&poll_spurious_irq_timer, |
| jiffies + POLL_SPURIOUS_IRQ_INTERVAL); |
| } |
| |
| static inline int bad_action_ret(irqreturn_t action_ret) |
| { |
| if (likely(action_ret <= (IRQ_HANDLED | IRQ_WAKE_THREAD))) |
| return 0; |
| return 1; |
| } |
| |
| /* |
| * If 99,900 of the previous 100,000 interrupts have not been handled |
| * then assume that the IRQ is stuck in some manner. Drop a diagnostic |
| * and try to turn the IRQ off. |
| * |
| * (The other 100-of-100,000 interrupts may have been a correctly |
| * functioning device sharing an IRQ with the failing one) |
| */ |
| static void |
| __report_bad_irq(unsigned int irq, struct irq_desc *desc, |
| irqreturn_t action_ret) |
| { |
| struct irqaction *action; |
| unsigned long flags; |
| |
| if (bad_action_ret(action_ret)) { |
| printk(KERN_ERR "irq event %d: bogus return value %x\n", |
| irq, action_ret); |
| } else { |
| printk(KERN_ERR "irq %d: nobody cared (try booting with " |
| "the \"irqpoll\" option)\n", irq); |
| } |
| dump_stack(); |
| printk(KERN_ERR "handlers:\n"); |
| |
| /* |
| * We need to take desc->lock here. note_interrupt() is called |
| * w/o desc->lock held, but IRQ_PROGRESS set. We might race |
| * with something else removing an action. It's ok to take |
| * desc->lock here. See synchronize_irq(). |
| */ |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| action = desc->action; |
| while (action) { |
| printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler); |
| if (action->thread_fn) |
| printk(KERN_CONT " threaded [<%p>] %pf", |
| action->thread_fn, action->thread_fn); |
| printk(KERN_CONT "\n"); |
| action = action->next; |
| } |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| } |
| |
| static void |
| report_bad_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) |
| { |
| static int count = 100; |
| |
| if (count > 0) { |
| count--; |
| __report_bad_irq(irq, desc, action_ret); |
| } |
| } |
| |
| static inline int |
| try_misrouted_irq(unsigned int irq, struct irq_desc *desc, |
| irqreturn_t action_ret) |
| { |
| struct irqaction *action; |
| |
| if (!irqfixup) |
| return 0; |
| |
| /* We didn't actually handle the IRQ - see if it was misrouted? */ |
| if (action_ret == IRQ_NONE) |
| return 1; |
| |
| /* |
| * But for 'irqfixup == 2' we also do it for handled interrupts if |
| * they are marked as IRQF_IRQPOLL (or for irq zero, which is the |
| * traditional PC timer interrupt.. Legacy) |
| */ |
| if (irqfixup < 2) |
| return 0; |
| |
| if (!irq) |
| return 1; |
| |
| /* |
| * Since we don't get the descriptor lock, "action" can |
| * change under us. We don't really care, but we don't |
| * want to follow a NULL pointer. So tell the compiler to |
| * just load it once by using a barrier. |
| */ |
| action = desc->action; |
| barrier(); |
| return action && (action->flags & IRQF_IRQPOLL); |
| } |
| |
| void note_interrupt(unsigned int irq, struct irq_desc *desc, |
| irqreturn_t action_ret) |
| { |
| if (desc->istate & IRQS_POLL_INPROGRESS) |
| return; |
| |
| /* we get here again via the threaded handler */ |
| if (action_ret == IRQ_WAKE_THREAD) |
| return; |
| |
| if (bad_action_ret(action_ret)) { |
| report_bad_irq(irq, desc, action_ret); |
| return; |
| } |
| |
| if (unlikely(action_ret == IRQ_NONE)) { |
| /* |
| * If we are seeing only the odd spurious IRQ caused by |
| * bus asynchronicity then don't eventually trigger an error, |
| * otherwise the counter becomes a doomsday timer for otherwise |
| * working systems |
| */ |
| if (time_after(jiffies, desc->last_unhandled + HZ/10)) |
| desc->irqs_unhandled = 1; |
| else |
| desc->irqs_unhandled++; |
| desc->last_unhandled = jiffies; |
| } |
| |
| if (unlikely(try_misrouted_irq(irq, desc, action_ret))) { |
| int ok = misrouted_irq(irq); |
| if (action_ret == IRQ_NONE) |
| desc->irqs_unhandled -= ok; |
| } |
| |
| desc->irq_count++; |
| if (likely(desc->irq_count < 100000)) |
| return; |
| |
| desc->irq_count = 0; |
| if (unlikely(desc->irqs_unhandled > 99900)) { |
| /* |
| * The interrupt is stuck |
| */ |
| __report_bad_irq(irq, desc, action_ret); |
| /* |
| * Now kill the IRQ |
| */ |
| printk(KERN_EMERG "Disabling IRQ #%d\n", irq); |
| desc->istate |= IRQS_SPURIOUS_DISABLED; |
| desc->depth++; |
| irq_disable(desc); |
| |
| mod_timer(&poll_spurious_irq_timer, |
| jiffies + POLL_SPURIOUS_IRQ_INTERVAL); |
| } |
| desc->irqs_unhandled = 0; |
| } |
| |
| int noirqdebug __read_mostly; |
| |
| int noirqdebug_setup(char *str) |
| { |
| noirqdebug = 1; |
| printk(KERN_INFO "IRQ lockup detection disabled\n"); |
| |
| return 1; |
| } |
| |
| __setup("noirqdebug", noirqdebug_setup); |
| module_param(noirqdebug, bool, 0644); |
| MODULE_PARM_DESC(noirqdebug, "Disable irq lockup detection when true"); |
| |
| static int __init irqfixup_setup(char *str) |
| { |
| irqfixup = 1; |
| printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n"); |
| printk(KERN_WARNING "This may impact system performance.\n"); |
| |
| return 1; |
| } |
| |
| __setup("irqfixup", irqfixup_setup); |
| module_param(irqfixup, int, 0644); |
| |
| static int __init irqpoll_setup(char *str) |
| { |
| irqfixup = 2; |
| printk(KERN_WARNING "Misrouted IRQ fixup and polling support " |
| "enabled\n"); |
| printk(KERN_WARNING "This may significantly impact system " |
| "performance\n"); |
| return 1; |
| } |
| |
| __setup("irqpoll", irqpoll_setup); |