| /* | |
| * ARM Ltd. Versatile Express | |
| * | |
| * Motherboard Express uATX | |
| * V2M-P1 | |
| * | |
| * HBI-0190D | |
| * | |
| * Original memory map ("Legacy memory map" in the board's | |
| * Technical Reference Manual) | |
| * | |
| * WARNING! The hardware described in this file is independent from the | |
| * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong | |
| * correspondence between the two configurations. | |
| * | |
| * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT | |
| * CHANGES TO vexpress-v2m-rs1.dtsi! | |
| */ | |
| motherboard { | |
| model = "V2M-P1"; | |
| arm,hbi = <0x190>; | |
| arm,vexpress,site = <0>; | |
| compatible = "arm,vexpress,v2m-p1", "simple-bus"; | |
| #address-cells = <2>; /* SMB chipselect number and offset */ | |
| #size-cells = <1>; | |
| #interrupt-cells = <1>; | |
| ranges; | |
| flash@0,00000000 { | |
| compatible = "arm,vexpress-flash", "cfi-flash"; | |
| reg = <0 0x00000000 0x04000000>, | |
| <1 0x00000000 0x04000000>; | |
| bank-width = <4>; | |
| }; | |
| psram@2,00000000 { | |
| compatible = "arm,vexpress-psram", "mtd-ram"; | |
| reg = <2 0x00000000 0x02000000>; | |
| bank-width = <4>; | |
| }; | |
| v2m_video_ram: vram@3,00000000 { | |
| compatible = "arm,vexpress-vram"; | |
| reg = <3 0x00000000 0x00800000>; | |
| }; | |
| ethernet@3,02000000 { | |
| compatible = "smsc,lan9118", "smsc,lan9115"; | |
| reg = <3 0x02000000 0x10000>; | |
| interrupts = <15>; | |
| phy-mode = "mii"; | |
| reg-io-width = <4>; | |
| smsc,irq-active-high; | |
| smsc,irq-push-pull; | |
| vdd33a-supply = <&v2m_fixed_3v3>; | |
| vddvario-supply = <&v2m_fixed_3v3>; | |
| }; | |
| usb@3,03000000 { | |
| compatible = "nxp,usb-isp1761"; | |
| reg = <3 0x03000000 0x20000>; | |
| interrupts = <16>; | |
| port1-otg; | |
| }; | |
| iofpga@7,00000000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 7 0 0x20000>; | |
| v2m_sysreg: sysreg@00000 { | |
| compatible = "arm,vexpress-sysreg"; | |
| reg = <0x00000 0x1000>; | |
| v2m_led_gpios: sys_led@08 { | |
| compatible = "arm,vexpress-sysreg,sys_led"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| v2m_mmc_gpios: sys_mci@48 { | |
| compatible = "arm,vexpress-sysreg,sys_mci"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| v2m_flash_gpios: sys_flash@4c { | |
| compatible = "arm,vexpress-sysreg,sys_flash"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| }; | |
| v2m_sysctl: sysctl@01000 { | |
| compatible = "arm,sp810", "arm,primecell"; | |
| reg = <0x01000 0x1000>; | |
| clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; | |
| clock-names = "refclk", "timclk", "apb_pclk"; | |
| #clock-cells = <1>; | |
| clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; | |
| assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; | |
| assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; | |
| }; | |
| /* PCI-E I2C bus */ | |
| v2m_i2c_pcie: i2c@02000 { | |
| compatible = "arm,versatile-i2c"; | |
| reg = <0x02000 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| pcie-switch@60 { | |
| compatible = "idt,89hpes32h8"; | |
| reg = <0x60>; | |
| }; | |
| }; | |
| aaci@04000 { | |
| compatible = "arm,pl041", "arm,primecell"; | |
| reg = <0x04000 0x1000>; | |
| interrupts = <11>; | |
| clocks = <&smbclk>; | |
| clock-names = "apb_pclk"; | |
| }; | |
| mmci@05000 { | |
| compatible = "arm,pl180", "arm,primecell"; | |
| reg = <0x05000 0x1000>; | |
| interrupts = <9 10>; | |
| cd-gpios = <&v2m_mmc_gpios 0 0>; | |
| wp-gpios = <&v2m_mmc_gpios 1 0>; | |
| max-frequency = <12000000>; | |
| vmmc-supply = <&v2m_fixed_3v3>; | |
| clocks = <&v2m_clk24mhz>, <&smbclk>; | |
| clock-names = "mclk", "apb_pclk"; | |
| }; | |
| kmi@06000 { | |
| compatible = "arm,pl050", "arm,primecell"; | |
| reg = <0x06000 0x1000>; | |
| interrupts = <12>; | |
| clocks = <&v2m_clk24mhz>, <&smbclk>; | |
| clock-names = "KMIREFCLK", "apb_pclk"; | |
| }; | |
| kmi@07000 { | |
| compatible = "arm,pl050", "arm,primecell"; | |
| reg = <0x07000 0x1000>; | |
| interrupts = <13>; | |
| clocks = <&v2m_clk24mhz>, <&smbclk>; | |
| clock-names = "KMIREFCLK", "apb_pclk"; | |
| }; | |
| v2m_serial0: uart@09000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x09000 0x1000>; | |
| interrupts = <5>; | |
| clocks = <&v2m_oscclk2>, <&smbclk>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial1: uart@0a000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0a000 0x1000>; | |
| interrupts = <6>; | |
| clocks = <&v2m_oscclk2>, <&smbclk>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial2: uart@0b000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0b000 0x1000>; | |
| interrupts = <7>; | |
| clocks = <&v2m_oscclk2>, <&smbclk>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial3: uart@0c000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0c000 0x1000>; | |
| interrupts = <8>; | |
| clocks = <&v2m_oscclk2>, <&smbclk>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| wdt@0f000 { | |
| compatible = "arm,sp805", "arm,primecell"; | |
| reg = <0x0f000 0x1000>; | |
| interrupts = <0>; | |
| clocks = <&v2m_refclk32khz>, <&smbclk>; | |
| clock-names = "wdogclk", "apb_pclk"; | |
| }; | |
| v2m_timer01: timer@11000 { | |
| compatible = "arm,sp804", "arm,primecell"; | |
| reg = <0x11000 0x1000>; | |
| interrupts = <2>; | |
| clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; | |
| clock-names = "timclken1", "timclken2", "apb_pclk"; | |
| }; | |
| v2m_timer23: timer@12000 { | |
| compatible = "arm,sp804", "arm,primecell"; | |
| reg = <0x12000 0x1000>; | |
| interrupts = <3>; | |
| clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; | |
| clock-names = "timclken1", "timclken2", "apb_pclk"; | |
| }; | |
| /* DVI I2C bus */ | |
| v2m_i2c_dvi: i2c@16000 { | |
| compatible = "arm,versatile-i2c"; | |
| reg = <0x16000 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| dvi-transmitter@39 { | |
| compatible = "sil,sii9022-tpi", "sil,sii9022"; | |
| reg = <0x39>; | |
| }; | |
| dvi-transmitter@60 { | |
| compatible = "sil,sii9022-cpi", "sil,sii9022"; | |
| reg = <0x60>; | |
| }; | |
| }; | |
| rtc@17000 { | |
| compatible = "arm,pl031", "arm,primecell"; | |
| reg = <0x17000 0x1000>; | |
| interrupts = <4>; | |
| clocks = <&smbclk>; | |
| clock-names = "apb_pclk"; | |
| }; | |
| compact-flash@1a000 { | |
| compatible = "arm,vexpress-cf", "ata-generic"; | |
| reg = <0x1a000 0x100 | |
| 0x1a100 0xf00>; | |
| reg-shift = <2>; | |
| }; | |
| clcd@1f000 { | |
| compatible = "arm,pl111", "arm,primecell"; | |
| reg = <0x1f000 0x1000>; | |
| interrupt-names = "combined"; | |
| interrupts = <14>; | |
| clocks = <&v2m_oscclk1>, <&smbclk>; | |
| clock-names = "clcdclk", "apb_pclk"; | |
| memory-region = <&v2m_video_ram>; | |
| max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ | |
| port { | |
| v2m_clcd_pads: endpoint { | |
| remote-endpoint = <&v2m_clcd_panel>; | |
| arm,pl11x,tft-r0g0b0-pads = <0 8 16>; | |
| }; | |
| }; | |
| panel { | |
| compatible = "panel-dpi"; | |
| port { | |
| v2m_clcd_panel: endpoint { | |
| remote-endpoint = <&v2m_clcd_pads>; | |
| }; | |
| }; | |
| panel-timing { | |
| clock-frequency = <25175000>; | |
| hactive = <640>; | |
| hback-porch = <40>; | |
| hfront-porch = <24>; | |
| hsync-len = <96>; | |
| vactive = <480>; | |
| vback-porch = <32>; | |
| vfront-porch = <11>; | |
| vsync-len = <2>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| v2m_fixed_3v3: fixedregulator@0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "3V3"; | |
| regulator-min-microvolt = <3300000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-always-on; | |
| }; | |
| v2m_clk24mhz: clk24mhz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <24000000>; | |
| clock-output-names = "v2m:clk24mhz"; | |
| }; | |
| v2m_refclk1mhz: refclk1mhz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <1000000>; | |
| clock-output-names = "v2m:refclk1mhz"; | |
| }; | |
| v2m_refclk32khz: refclk32khz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <32768>; | |
| clock-output-names = "v2m:refclk32khz"; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| user@1 { | |
| label = "v2m:green:user1"; | |
| gpios = <&v2m_led_gpios 0 0>; | |
| linux,default-trigger = "heartbeat"; | |
| }; | |
| user@2 { | |
| label = "v2m:green:user2"; | |
| gpios = <&v2m_led_gpios 1 0>; | |
| linux,default-trigger = "mmc0"; | |
| }; | |
| user@3 { | |
| label = "v2m:green:user3"; | |
| gpios = <&v2m_led_gpios 2 0>; | |
| linux,default-trigger = "cpu0"; | |
| }; | |
| user@4 { | |
| label = "v2m:green:user4"; | |
| gpios = <&v2m_led_gpios 3 0>; | |
| linux,default-trigger = "cpu1"; | |
| }; | |
| user@5 { | |
| label = "v2m:green:user5"; | |
| gpios = <&v2m_led_gpios 4 0>; | |
| linux,default-trigger = "cpu2"; | |
| }; | |
| user@6 { | |
| label = "v2m:green:user6"; | |
| gpios = <&v2m_led_gpios 5 0>; | |
| linux,default-trigger = "cpu3"; | |
| }; | |
| user@7 { | |
| label = "v2m:green:user7"; | |
| gpios = <&v2m_led_gpios 6 0>; | |
| linux,default-trigger = "cpu4"; | |
| }; | |
| user@8 { | |
| label = "v2m:green:user8"; | |
| gpios = <&v2m_led_gpios 7 0>; | |
| linux,default-trigger = "cpu5"; | |
| }; | |
| }; | |
| mcc { | |
| compatible = "arm,vexpress,config-bus"; | |
| arm,vexpress,config-bridge = <&v2m_sysreg>; | |
| osc@0 { | |
| /* MCC static memory clock */ | |
| compatible = "arm,vexpress-osc"; | |
| arm,vexpress-sysreg,func = <1 0>; | |
| freq-range = <25000000 60000000>; | |
| #clock-cells = <0>; | |
| clock-output-names = "v2m:oscclk0"; | |
| }; | |
| v2m_oscclk1: osc@1 { | |
| /* CLCD clock */ | |
| compatible = "arm,vexpress-osc"; | |
| arm,vexpress-sysreg,func = <1 1>; | |
| freq-range = <23750000 65000000>; | |
| #clock-cells = <0>; | |
| clock-output-names = "v2m:oscclk1"; | |
| }; | |
| v2m_oscclk2: osc@2 { | |
| /* IO FPGA peripheral clock */ | |
| compatible = "arm,vexpress-osc"; | |
| arm,vexpress-sysreg,func = <1 2>; | |
| freq-range = <24000000 24000000>; | |
| #clock-cells = <0>; | |
| clock-output-names = "v2m:oscclk2"; | |
| }; | |
| volt@0 { | |
| /* Logic level voltage */ | |
| compatible = "arm,vexpress-volt"; | |
| arm,vexpress-sysreg,func = <2 0>; | |
| regulator-name = "VIO"; | |
| regulator-always-on; | |
| label = "VIO"; | |
| }; | |
| temp@0 { | |
| /* MCC internal operating temperature */ | |
| compatible = "arm,vexpress-temp"; | |
| arm,vexpress-sysreg,func = <4 0>; | |
| label = "MCC"; | |
| }; | |
| reset@0 { | |
| compatible = "arm,vexpress-reset"; | |
| arm,vexpress-sysreg,func = <5 0>; | |
| }; | |
| muxfpga@0 { | |
| compatible = "arm,vexpress-muxfpga"; | |
| arm,vexpress-sysreg,func = <7 0>; | |
| }; | |
| shutdown@0 { | |
| compatible = "arm,vexpress-shutdown"; | |
| arm,vexpress-sysreg,func = <8 0>; | |
| }; | |
| reboot@0 { | |
| compatible = "arm,vexpress-reboot"; | |
| arm,vexpress-sysreg,func = <9 0>; | |
| }; | |
| dvimode@0 { | |
| compatible = "arm,vexpress-dvimode"; | |
| arm,vexpress-sysreg,func = <11 0>; | |
| }; | |
| }; | |
| }; |