| /* |
| * Lager board support |
| * |
| * Copyright (C) 2013-2014 Renesas Solutions Corp. |
| * Copyright (C) 2013 Magnus Damm |
| * Copyright (C) 2014 Cogent Embedded, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mmcif.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/platform_data/camera-rcar.h> |
| #include <linux/platform_data/gpio-rcar.h> |
| #include <linux/platform_data/rcar-du.h> |
| #include <linux/platform_data/usb-rcar-gen2-phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/gpio-regulator.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/sh_eth.h> |
| #include <linux/usb/phy.h> |
| #include <linux/usb/renesas_usbhs.h> |
| #include <mach/common.h> |
| #include <mach/irqs.h> |
| #include <mach/r8a7790.h> |
| #include <media/soc_camera.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/spi/flash.h> |
| #include <linux/spi/rspi.h> |
| #include <linux/spi/spi.h> |
| #include <sound/rcar_snd.h> |
| #include <sound/simple_card.h> |
| |
| /* |
| * SSI-AK4643 |
| * |
| * SW1: 1: AK4643 |
| * 2: CN22 |
| * 3: ADV7511 |
| * |
| * this command is required when playback. |
| * |
| * # amixer set "LINEOUT Mixer DACL" on |
| */ |
| |
| /* |
| * SDHI0 (CN8) |
| * |
| * JP3: pin1 |
| * SW20: pin1 |
| |
| * GP5_24: 1: VDD 3.3V (defult) |
| * 0: VDD 0.0V |
| * GP5_29: 1: VccQ 3.3V (defult) |
| * 0: VccQ 1.8V |
| * |
| */ |
| |
| /* DU */ |
| static struct rcar_du_encoder_data lager_du_encoders[] = { |
| { |
| .type = RCAR_DU_ENCODER_VGA, |
| .output = RCAR_DU_OUTPUT_DPAD0, |
| }, { |
| .type = RCAR_DU_ENCODER_NONE, |
| .output = RCAR_DU_OUTPUT_LVDS1, |
| .connector.lvds.panel = { |
| .width_mm = 210, |
| .height_mm = 158, |
| .mode = { |
| .clock = 65000, |
| .hdisplay = 1024, |
| .hsync_start = 1048, |
| .hsync_end = 1184, |
| .htotal = 1344, |
| .vdisplay = 768, |
| .vsync_start = 771, |
| .vsync_end = 777, |
| .vtotal = 806, |
| .flags = 0, |
| }, |
| }, |
| }, |
| }; |
| |
| static const struct rcar_du_platform_data lager_du_pdata __initconst = { |
| .encoders = lager_du_encoders, |
| .num_encoders = ARRAY_SIZE(lager_du_encoders), |
| }; |
| |
| static const struct resource du_resources[] __initconst = { |
| DEFINE_RES_MEM(0xfeb00000, 0x70000), |
| DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), |
| DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"), |
| DEFINE_RES_IRQ(gic_spi(256)), |
| DEFINE_RES_IRQ(gic_spi(268)), |
| DEFINE_RES_IRQ(gic_spi(269)), |
| }; |
| |
| static void __init lager_add_du_device(void) |
| { |
| struct platform_device_info info = { |
| .name = "rcar-du-r8a7790", |
| .id = -1, |
| .res = du_resources, |
| .num_res = ARRAY_SIZE(du_resources), |
| .data = &lager_du_pdata, |
| .size_data = sizeof(lager_du_pdata), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| platform_device_register_full(&info); |
| } |
| |
| /* LEDS */ |
| static struct gpio_led lager_leds[] = { |
| { |
| .name = "led8", |
| .gpio = RCAR_GP_PIN(5, 17), |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, { |
| .name = "led7", |
| .gpio = RCAR_GP_PIN(4, 23), |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, { |
| .name = "led6", |
| .gpio = RCAR_GP_PIN(4, 22), |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, |
| }; |
| |
| static const struct gpio_led_platform_data lager_leds_pdata __initconst = { |
| .leds = lager_leds, |
| .num_leds = ARRAY_SIZE(lager_leds), |
| }; |
| |
| /* GPIO KEY */ |
| #define GPIO_KEY(c, g, d, ...) \ |
| { .code = c, .gpio = g, .desc = d, .active_low = 1, \ |
| .wakeup = 1, .debounce_interval = 20 } |
| |
| static struct gpio_keys_button gpio_buttons[] = { |
| GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), |
| GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), |
| GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), |
| GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"), |
| }; |
| |
| static const struct gpio_keys_platform_data lager_keys_pdata __initconst = { |
| .buttons = gpio_buttons, |
| .nbuttons = ARRAY_SIZE(gpio_buttons), |
| }; |
| |
| /* Fixed 3.3V regulator to be used by MMCIF */ |
| static struct regulator_consumer_supply fixed3v3_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"), |
| }; |
| |
| /* |
| * SDHI regulator macro |
| * |
| ** FIXME** |
| * Lager board vqmmc is provided via DA9063 PMIC chip, |
| * and we should use ${LINK}/drivers/mfd/da9063-* driver for it. |
| * but, it doesn't have regulator support at this point. |
| * It uses gpio-regulator for vqmmc as quick-hack. |
| */ |
| #define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \ |
| static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \ |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \ |
| \ |
| static struct regulator_init_data vcc_sdhi##idx##_init_data = { \ |
| .constraints = { \ |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, \ |
| }, \ |
| .consumer_supplies = &vcc_sdhi##idx##_consumer, \ |
| .num_consumer_supplies = 1, \ |
| }; \ |
| \ |
| static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\ |
| .supply_name = "SDHI" #idx "Vcc", \ |
| .microvolts = 3300000, \ |
| .gpio = vdd_pin, \ |
| .enable_high = 1, \ |
| .init_data = &vcc_sdhi##idx##_init_data, \ |
| }; \ |
| \ |
| static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \ |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \ |
| \ |
| static struct regulator_init_data vccq_sdhi##idx##_init_data = { \ |
| .constraints = { \ |
| .input_uV = 3300000, \ |
| .min_uV = 1800000, \ |
| .max_uV = 3300000, \ |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \ |
| REGULATOR_CHANGE_STATUS, \ |
| }, \ |
| .consumer_supplies = &vccq_sdhi##idx##_consumer, \ |
| .num_consumer_supplies = 1, \ |
| }; \ |
| \ |
| static struct gpio vccq_sdhi##idx##_gpio = \ |
| { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \ |
| \ |
| static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \ |
| { .value = 1800000, .gpios = 0 }, \ |
| { .value = 3300000, .gpios = 1 }, \ |
| }; \ |
| \ |
| static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\ |
| .supply_name = "vqmmc", \ |
| .gpios = &vccq_sdhi##idx##_gpio, \ |
| .nr_gpios = 1, \ |
| .states = vccq_sdhi##idx##_states, \ |
| .nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .init_data = &vccq_sdhi##idx##_init_data, \ |
| }; |
| |
| SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29)); |
| SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30)); |
| |
| /* MMCIF */ |
| static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = { |
| .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, |
| .clk_ctrl2_present = true, |
| .ccs_unsupported = true, |
| }; |
| |
| static const struct resource mmcif1_resources[] __initconst = { |
| DEFINE_RES_MEM(0xee220000, 0x80), |
| DEFINE_RES_IRQ(gic_spi(170)), |
| }; |
| |
| /* Ether */ |
| static const struct sh_eth_plat_data ether_pdata __initconst = { |
| .phy = 0x1, |
| .phy_irq = irq_pin(0), |
| .edmac_endian = EDMAC_LITTLE_ENDIAN, |
| .phy_interface = PHY_INTERFACE_MODE_RMII, |
| .ether_link_active_low = 1, |
| }; |
| |
| static const struct resource ether_resources[] __initconst = { |
| DEFINE_RES_MEM(0xee700000, 0x400), |
| DEFINE_RES_IRQ(gic_spi(162)), |
| }; |
| |
| static const struct platform_device_info ether_info __initconst = { |
| .name = "r8a7790-ether", |
| .id = -1, |
| .res = ether_resources, |
| .num_res = ARRAY_SIZE(ether_resources), |
| .data = ðer_pdata, |
| .size_data = sizeof(ether_pdata), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| /* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */ |
| static struct mtd_partition spi_flash_part[] = { |
| /* Reserved for user loader program, read-only */ |
| { |
| .name = "loader", |
| .offset = 0, |
| .size = SZ_256K, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| /* Reserved for user program, read-only */ |
| { |
| .name = "user", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_4M, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| /* All else is writable (e.g. JFFS2) */ |
| { |
| .name = "flash", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| .mask_flags = 0, |
| }, |
| }; |
| |
| static const struct flash_platform_data spi_flash_data = { |
| .name = "m25p80", |
| .parts = spi_flash_part, |
| .nr_parts = ARRAY_SIZE(spi_flash_part), |
| .type = "s25fl512s", |
| }; |
| |
| static const struct rspi_plat_data qspi_pdata __initconst = { |
| .num_chipselect = 1, |
| }; |
| |
| static const struct spi_board_info spi_info[] __initconst = { |
| { |
| .modalias = "m25p80", |
| .platform_data = &spi_flash_data, |
| .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, |
| .max_speed_hz = 30000000, |
| .bus_num = 0, |
| .chip_select = 0, |
| }, |
| }; |
| |
| /* QSPI resource */ |
| static const struct resource qspi_resources[] __initconst = { |
| DEFINE_RES_MEM(0xe6b10000, 0x1000), |
| DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"), |
| }; |
| |
| /* VIN */ |
| static const struct resource vin_resources[] __initconst = { |
| /* VIN0 */ |
| DEFINE_RES_MEM(0xe6ef0000, 0x1000), |
| DEFINE_RES_IRQ(gic_spi(188)), |
| /* VIN1 */ |
| DEFINE_RES_MEM(0xe6ef1000, 0x1000), |
| DEFINE_RES_IRQ(gic_spi(189)), |
| }; |
| |
| static void __init lager_add_vin_device(unsigned idx, |
| struct rcar_vin_platform_data *pdata) |
| { |
| struct platform_device_info vin_info = { |
| .name = "r8a7790-vin", |
| .id = idx, |
| .res = &vin_resources[idx * 2], |
| .num_res = 2, |
| .dma_mask = DMA_BIT_MASK(32), |
| .data = pdata, |
| .size_data = sizeof(*pdata), |
| }; |
| |
| BUG_ON(idx > 1); |
| |
| platform_device_register_full(&vin_info); |
| } |
| |
| #define LAGER_CAMERA(idx, name, addr, pdata, flag) \ |
| static struct i2c_board_info i2c_cam##idx##_device = { \ |
| I2C_BOARD_INFO(name, addr), \ |
| }; \ |
| \ |
| static struct rcar_vin_platform_data vin##idx##_pdata = { \ |
| .flags = flag, \ |
| }; \ |
| \ |
| static struct soc_camera_link cam##idx##_link = { \ |
| .bus_id = idx, \ |
| .board_info = &i2c_cam##idx##_device, \ |
| .i2c_adapter_id = 2, \ |
| .module_name = name, \ |
| .priv = pdata, \ |
| } |
| |
| /* Camera 0 is not currently supported due to adv7612 support missing */ |
| LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656); |
| |
| static void __init lager_add_camera1_device(void) |
| { |
| platform_device_register_data(NULL, "soc-camera-pdrv", 1, |
| &cam1_link, sizeof(cam1_link)); |
| lager_add_vin_device(1, &vin1_pdata); |
| } |
| |
| /* SATA1 */ |
| static const struct resource sata1_resources[] __initconst = { |
| DEFINE_RES_MEM(0xee500000, 0x2000), |
| DEFINE_RES_IRQ(gic_spi(106)), |
| }; |
| |
| static const struct platform_device_info sata1_info __initconst = { |
| .name = "sata-r8a7790", |
| .id = 1, |
| .res = sata1_resources, |
| .num_res = ARRAY_SIZE(sata1_resources), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| /* USBHS */ |
| static const struct resource usbhs_resources[] __initconst = { |
| DEFINE_RES_MEM(0xe6590000, 0x100), |
| DEFINE_RES_IRQ(gic_spi(107)), |
| }; |
| |
| struct usbhs_private { |
| struct renesas_usbhs_platform_info info; |
| struct usb_phy *phy; |
| }; |
| |
| #define usbhs_get_priv(pdev) \ |
| container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info) |
| |
| static int usbhs_power_ctrl(struct platform_device *pdev, |
| void __iomem *base, int enable) |
| { |
| struct usbhs_private *priv = usbhs_get_priv(pdev); |
| |
| if (!priv->phy) |
| return -ENODEV; |
| |
| if (enable) { |
| int retval = usb_phy_init(priv->phy); |
| |
| if (!retval) |
| retval = usb_phy_set_suspend(priv->phy, 0); |
| return retval; |
| } |
| |
| usb_phy_set_suspend(priv->phy, 1); |
| usb_phy_shutdown(priv->phy); |
| return 0; |
| } |
| |
| static int usbhs_hardware_init(struct platform_device *pdev) |
| { |
| struct usbhs_private *priv = usbhs_get_priv(pdev); |
| struct usb_phy *phy; |
| int ret; |
| |
| /* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5 |
| * setting to avoid VBUS short circuit due to wrong cable. |
| * PWEN should be pulled up high if USB Function is selected by SW5 |
| */ |
| gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */ |
| if (!gpio_get_value(RCAR_GP_PIN(5, 18))) { |
| pr_warn("Error: USB Function not selected - check SW5 + SW6\n"); |
| ret = -ENOTSUPP; |
| goto error; |
| } |
| |
| phy = usb_get_phy_dev(&pdev->dev, 0); |
| if (IS_ERR(phy)) { |
| ret = PTR_ERR(phy); |
| goto error; |
| } |
| |
| priv->phy = phy; |
| return 0; |
| error: |
| gpio_free(RCAR_GP_PIN(5, 18)); |
| return ret; |
| } |
| |
| static int usbhs_hardware_exit(struct platform_device *pdev) |
| { |
| struct usbhs_private *priv = usbhs_get_priv(pdev); |
| |
| if (!priv->phy) |
| return 0; |
| |
| usb_put_phy(priv->phy); |
| priv->phy = NULL; |
| |
| gpio_free(RCAR_GP_PIN(5, 18)); |
| return 0; |
| } |
| |
| static int usbhs_get_id(struct platform_device *pdev) |
| { |
| return USBHS_GADGET; |
| } |
| |
| static u32 lager_usbhs_pipe_type[] = { |
| USB_ENDPOINT_XFER_CONTROL, |
| USB_ENDPOINT_XFER_ISOC, |
| USB_ENDPOINT_XFER_ISOC, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_INT, |
| USB_ENDPOINT_XFER_INT, |
| USB_ENDPOINT_XFER_INT, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usbhs_private usbhs_priv __initdata = { |
| .info = { |
| .platform_callback = { |
| .power_ctrl = usbhs_power_ctrl, |
| .hardware_init = usbhs_hardware_init, |
| .hardware_exit = usbhs_hardware_exit, |
| .get_id = usbhs_get_id, |
| }, |
| .driver_param = { |
| .buswait_bwait = 4, |
| .pipe_type = lager_usbhs_pipe_type, |
| .pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type), |
| }, |
| } |
| }; |
| |
| static void __init lager_register_usbhs(void) |
| { |
| usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2"); |
| platform_device_register_resndata(NULL, |
| "renesas_usbhs", -1, |
| usbhs_resources, |
| ARRAY_SIZE(usbhs_resources), |
| &usbhs_priv.info, |
| sizeof(usbhs_priv.info)); |
| } |
| |
| /* USBHS PHY */ |
| static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = { |
| .chan0_pci = 0, /* Channel 0 is USBHS */ |
| .chan2_pci = 1, /* Channel 2 is PCI USB */ |
| }; |
| |
| static const struct resource usbhs_phy_resources[] __initconst = { |
| DEFINE_RES_MEM(0xe6590100, 0x100), |
| }; |
| |
| /* I2C */ |
| static struct i2c_board_info i2c2_devices[] = { |
| { |
| I2C_BOARD_INFO("ak4643", 0x12), |
| } |
| }; |
| |
| /* Sound */ |
| static struct resource rsnd_resources[] __initdata = { |
| [RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000), |
| [RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100), |
| [RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000), |
| [RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280), |
| }; |
| |
| static struct rsnd_ssi_platform_info rsnd_ssi[] = { |
| RSND_SSI(0, gic_spi(370), 0), |
| RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), |
| }; |
| |
| static struct rsnd_src_platform_info rsnd_src[2] = { |
| /* no member at this point */ |
| }; |
| |
| static struct rsnd_dai_platform_info rsnd_dai = { |
| .playback = { .ssi = &rsnd_ssi[0], }, |
| .capture = { .ssi = &rsnd_ssi[1], }, |
| }; |
| |
| static struct rcar_snd_info rsnd_info = { |
| .flags = RSND_GEN2, |
| .ssi_info = rsnd_ssi, |
| .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), |
| .src_info = rsnd_src, |
| .src_info_nr = ARRAY_SIZE(rsnd_src), |
| .dai_info = &rsnd_dai, |
| .dai_info_nr = 1, |
| }; |
| |
| static struct asoc_simple_card_info rsnd_card_info = { |
| .name = "AK4643", |
| .card = "SSI01-AK4643", |
| .codec = "ak4642-codec.2-0012", |
| .platform = "rcar_sound", |
| .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, |
| .cpu_dai = { |
| .name = "rcar_sound", |
| }, |
| .codec_dai = { |
| .name = "ak4642-hifi", |
| .sysclk = 11289600, |
| }, |
| }; |
| |
| static void __init lager_add_rsnd_device(void) |
| { |
| struct platform_device_info cardinfo = { |
| .name = "asoc-simple-card", |
| .id = -1, |
| .data = &rsnd_card_info, |
| .size_data = sizeof(struct asoc_simple_card_info), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| i2c_register_board_info(2, i2c2_devices, |
| ARRAY_SIZE(i2c2_devices)); |
| |
| platform_device_register_resndata( |
| NULL, "rcar_sound", -1, |
| rsnd_resources, ARRAY_SIZE(rsnd_resources), |
| &rsnd_info, sizeof(rsnd_info)); |
| |
| platform_device_register_full(&cardinfo); |
| } |
| |
| /* SDHI0 */ |
| static struct sh_mobile_sdhi_info sdhi0_info __initdata = { |
| .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
| MMC_CAP_POWER_OFF_CARD, |
| .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, |
| .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | |
| TMIO_MMC_WRPROTECT_DISABLE, |
| }; |
| |
| static struct resource sdhi0_resources[] __initdata = { |
| DEFINE_RES_MEM(0xee100000, 0x200), |
| DEFINE_RES_IRQ(gic_spi(165)), |
| }; |
| |
| /* SDHI2 */ |
| static struct sh_mobile_sdhi_info sdhi2_info __initdata = { |
| .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
| MMC_CAP_POWER_OFF_CARD, |
| .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, |
| .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | |
| TMIO_MMC_WRPROTECT_DISABLE, |
| }; |
| |
| static struct resource sdhi2_resources[] __initdata = { |
| DEFINE_RES_MEM(0xee140000, 0x100), |
| DEFINE_RES_IRQ(gic_spi(167)), |
| }; |
| |
| /* Internal PCI1 */ |
| static const struct resource pci1_resources[] __initconst = { |
| DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */ |
| DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */ |
| DEFINE_RES_IRQ(gic_spi(112)), |
| }; |
| |
| static const struct platform_device_info pci1_info __initconst = { |
| .name = "pci-rcar-gen2", |
| .id = 1, |
| .res = pci1_resources, |
| .num_res = ARRAY_SIZE(pci1_resources), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static void __init lager_add_usb1_device(void) |
| { |
| platform_device_register_full(&pci1_info); |
| } |
| |
| /* Internal PCI2 */ |
| static const struct resource pci2_resources[] __initconst = { |
| DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */ |
| DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */ |
| DEFINE_RES_IRQ(gic_spi(113)), |
| }; |
| |
| static const struct platform_device_info pci2_info __initconst = { |
| .name = "pci-rcar-gen2", |
| .id = 2, |
| .res = pci2_resources, |
| .num_res = ARRAY_SIZE(pci2_resources), |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static void __init lager_add_usb2_device(void) |
| { |
| platform_device_register_full(&pci2_info); |
| } |
| |
| static const struct pinctrl_map lager_pinctrl_map[] = { |
| /* DU (CN10: ARGB0, CN13: LVDS) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", |
| "du_rgb666", "du"), |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", |
| "du_sync_1", "du"), |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", |
| "du_clk_out_0", "du"), |
| /* I2C2 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790", |
| "i2c2", "i2c2"), |
| /* QSPI */ |
| PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790", |
| "qspi_ctrl", "qspi"), |
| PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790", |
| "qspi_data4", "qspi"), |
| /* SCIF0 (CN19: DEBUG SERIAL0) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", |
| "scif0_data", "scif0"), |
| /* SCIF1 (CN20: DEBUG SERIAL1) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790", |
| "scif1_data", "scif1"), |
| /* SDHI0 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", |
| "sdhi0_data4", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", |
| "sdhi0_ctrl", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", |
| "sdhi0_cd", "sdhi0"), |
| /* SDHI2 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", |
| "sdhi2_data4", "sdhi2"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", |
| "sdhi2_ctrl", "sdhi2"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", |
| "sdhi2_cd", "sdhi2"), |
| /* SSI (CN17: sound) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", |
| "ssi0129_ctrl", "ssi"), |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", |
| "ssi0_data", "ssi"), |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", |
| "ssi1_data", "ssi"), |
| PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", |
| "audio_clk_a", "audio_clk"), |
| /* MMCIF1 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", |
| "mmc1_data8", "mmc1"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", |
| "mmc1_ctrl", "mmc1"), |
| /* Ether */ |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", |
| "eth_link", "eth"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", |
| "eth_mdio", "eth"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", |
| "eth_rmii", "eth"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", |
| "intc_irq0", "intc"), |
| /* VIN0 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", |
| "vin0_data24", "vin0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", |
| "vin0_sync", "vin0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", |
| "vin0_field", "vin0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", |
| "vin0_clkenb", "vin0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", |
| "vin0_clk", "vin0"), |
| /* VIN1 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790", |
| "vin1_data8", "vin1"), |
| PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790", |
| "vin1_clk", "vin1"), |
| /* USB0 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790", |
| "usb0_ovc_vbus", "usb0"), |
| /* USB1 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790", |
| "usb1", "usb1"), |
| /* USB2 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790", |
| "usb2", "usb2"), |
| }; |
| |
| static void __init lager_add_standard_devices(void) |
| { |
| int fixed_regulator_idx = 0; |
| int gpio_regulator_idx = 0; |
| |
| r8a7790_clock_init(); |
| |
| pinctrl_register_mappings(lager_pinctrl_map, |
| ARRAY_SIZE(lager_pinctrl_map)); |
| r8a7790_pinmux_init(); |
| |
| r8a7790_add_standard_devices(); |
| platform_device_register_data(NULL, "leds-gpio", -1, |
| &lager_leds_pdata, |
| sizeof(lager_leds_pdata)); |
| platform_device_register_data(NULL, "gpio-keys", -1, |
| &lager_keys_pdata, |
| sizeof(lager_keys_pdata)); |
| regulator_register_always_on(fixed_regulator_idx++, |
| "fixed-3.3V", fixed3v3_power_consumers, |
| ARRAY_SIZE(fixed3v3_power_consumers), 3300000); |
| platform_device_register_resndata(NULL, "sh_mmcif", 1, |
| mmcif1_resources, ARRAY_SIZE(mmcif1_resources), |
| &mmcif1_pdata, sizeof(mmcif1_pdata)); |
| |
| platform_device_register_full(ðer_info); |
| |
| lager_add_du_device(); |
| |
| platform_device_register_resndata(NULL, "qspi", 0, |
| qspi_resources, |
| ARRAY_SIZE(qspi_resources), |
| &qspi_pdata, sizeof(qspi_pdata)); |
| spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); |
| |
| platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, |
| &vcc_sdhi0_info, sizeof(struct fixed_voltage_config)); |
| platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, |
| &vcc_sdhi2_info, sizeof(struct fixed_voltage_config)); |
| |
| platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, |
| &vccq_sdhi0_info, sizeof(struct gpio_regulator_config)); |
| platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, |
| &vccq_sdhi2_info, sizeof(struct gpio_regulator_config)); |
| |
| lager_add_camera1_device(); |
| |
| platform_device_register_full(&sata1_info); |
| |
| platform_device_register_resndata(NULL, "usb_phy_rcar_gen2", |
| -1, usbhs_phy_resources, |
| ARRAY_SIZE(usbhs_phy_resources), |
| &usbhs_phy_pdata, |
| sizeof(usbhs_phy_pdata)); |
| lager_register_usbhs(); |
| lager_add_usb1_device(); |
| lager_add_usb2_device(); |
| |
| lager_add_rsnd_device(); |
| |
| platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, |
| sdhi0_resources, ARRAY_SIZE(sdhi0_resources), |
| &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); |
| platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2, |
| sdhi2_resources, ARRAY_SIZE(sdhi2_resources), |
| &sdhi2_info, sizeof(struct sh_mobile_sdhi_info)); |
| } |
| |
| /* |
| * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds |
| * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits |
| * 14-15. We have to set them back to 01 from the default 00 value each time |
| * the PHY is reset. It's also important because the PHY's LED0 signal is |
| * connected to SoC's ETH_LINK signal and in the PHY's default mode it will |
| * bounce on and off after each packet, which we apparently want to avoid. |
| */ |
| static int lager_ksz8041_fixup(struct phy_device *phydev) |
| { |
| u16 phyctrl1 = phy_read(phydev, 0x1e); |
| |
| phyctrl1 &= ~0xc000; |
| phyctrl1 |= 0x4000; |
| return phy_write(phydev, 0x1e, phyctrl1); |
| } |
| |
| static void __init lager_init(void) |
| { |
| lager_add_standard_devices(); |
| |
| irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW); |
| |
| if (IS_ENABLED(CONFIG_PHYLIB)) |
| phy_register_fixup_for_id("r8a7790-ether-ff:01", |
| lager_ksz8041_fixup); |
| } |
| |
| static const char * const lager_boards_compat_dt[] __initconst = { |
| "renesas,lager", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(LAGER_DT, "lager") |
| .smp = smp_ops(r8a7790_smp_ops), |
| .init_early = r8a7790_init_early, |
| .init_time = rcar_gen2_timer_init, |
| .init_machine = lager_init, |
| .init_late = shmobile_init_late, |
| .dt_compat = lager_boards_compat_dt, |
| MACHINE_END |