| # |
| # HID driver configuration |
| # |
| menuconfig HID_SUPPORT |
| bool "HID Devices" |
| depends on INPUT |
| default y |
| ---help--- |
| Say Y here to get to see options for various computer-human interface |
| device drivers. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if HID_SUPPORT |
| |
| config HID |
| tristate "Generic HID support" |
| depends on INPUT |
| default y |
| ---help--- |
| A human interface device (HID) is a type of computer device that |
| interacts directly with and takes input from humans. The term "HID" |
| most commonly used to refer to the USB-HID specification, but other |
| devices (such as, but not strictly limited to, Bluetooth) are |
| designed using HID specification (this involves certain keyboards, |
| mice, tablets, etc). This option compiles into kernel the generic |
| HID layer code (parser, usages, etc.), which can then be used by |
| transport-specific HID implementation (like USB or Bluetooth). |
| |
| For docs and specs, see http://www.usb.org/developers/hidpage/ |
| |
| If unsure, say Y |
| |
| config HID_DEBUG |
| bool "HID debugging support" |
| default y if !EMBEDDED |
| depends on HID |
| ---help--- |
| This option lets the HID layer output diagnostics about its internal |
| state, resolve HID usages, dump HID fields, etc. Individual HID drivers |
| use this debugging facility to output information about individual HID |
| devices, etc. |
| |
| This feature is useful for those who are either debugging the HID parser |
| or any HID hardware device. |
| |
| If unsure, say N |
| |
| config HIDRAW |
| bool "/dev/hidraw raw HID device support" |
| depends on HID |
| ---help--- |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptable Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/hidraw. |
| |
| There is also a /dev/hiddev configuration option in the USB HID |
| configuration menu. In comparison to hiddev, this device does not process |
| the hid events at all (no parsing, no lookups). This lets applications |
| to work on raw hid events when they want to, and avoid using transport-specific |
| userspace libhid/libusb libraries. |
| |
| If unsure, say Y. |
| |
| source "drivers/hid/usbhid/Kconfig" |
| |
| menu "Special HID drivers" |
| depends on HID |
| |
| config HID_COMPAT |
| bool "Load all HID drivers on hid core load" |
| default y |
| ---help--- |
| Compatible option for older userspace. If you have system without udev |
| support of module loading through aliases and also old |
| module-init-tools which can't handle hid bus, choose Y here. Otherwise |
| say N. If you say N and your userspace is old enough, the only |
| functionality you lose is modules autoloading. |
| |
| If unsure, say Y. |
| |
| config HID_A4TECH |
| tristate "A4 tech" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for A4 tech X5 and WOP-35 / Trust 450L mice. |
| |
| config HID_APPLE |
| tristate "Apple" if EMBEDDED |
| depends on (USB_HID || BT_HIDP) |
| default !EMBEDDED |
| ---help--- |
| Support for some Apple devices which less or more break |
| HID specification. |
| |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, |
| MacBooks, MacBook Pros and Apple Aluminum. |
| |
| config HID_BELKIN |
| tristate "Belkin" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Belkin Flip KVM and Wireless keyboard. |
| |
| config HID_CHERRY |
| tristate "Cherry" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Cherry Cymotion keyboard. |
| |
| config HID_CHICONY |
| tristate "Chicony" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Chicony Tactical pad. |
| |
| config HID_CYPRESS |
| tristate "Cypress" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for cypress mouse and barcode readers. |
| |
| config HID_EZKEY |
| tristate "Ezkey" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Ezkey BTC 8193 keyboard. |
| |
| config HID_GYRATION |
| tristate "Gyration" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Gyration remote control. |
| |
| config HID_LOGITECH |
| tristate "Logitech" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Logitech devices that are not fully compliant with HID standard. |
| |
| config LOGITECH_FF |
| bool "Logitech force feedback" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| - Logitech Formula Force EX |
| - Logitech MOMO Force wheel |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config LOGIRUMBLEPAD2_FF |
| bool "Logitech Rumblepad 2 force feedback" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| Rumblepad 2 devices. |
| |
| config HID_MICROSOFT |
| tristate "Microsoft" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Microsoft devices that are not fully compliant with HID standard. |
| |
| config HID_MONTEREY |
| tristate "Monterey" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Monterey Genius KB29E. |
| |
| config HID_NTRIG |
| tristate "NTrig" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for N-Trig touch screen. |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord devices support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for PantherLord/GreenAsia based device support. |
| |
| config PANTHERLORD_FF |
| bool "Pantherlord force feedback support" |
| depends on HID_PANTHERLORD |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter and want to enable force feedback support for it. |
| |
| config HID_PETALYNX |
| tristate "Petalynx" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Petalynx Maxter remote control. |
| |
| config HID_SAMSUNG |
| tristate "Samsung" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Samsung InfraRed remote control. |
| |
| config HID_SONY |
| tristate "Sony" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Sony PS3 controller. |
| |
| config HID_SUNPLUS |
| tristate "Sunplus" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Sunplus wireless desktop. |
| |
| config GREENASIA_FF |
| tristate "GreenAsia (Product ID 0x12) force feedback support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller |
| (like MANTA Warior MM816 and SpeedLink Strike2 SL-6635) or adapter |
| and want to enable force feedback support for it. |
| |
| config HID_TOPSEED |
| tristate "TopSeed Cyberlink remote control support" if EMBEDDED |
| depends on USB_HID |
| default y |
| ---help--- |
| Say Y if you have a TopSeed Cyberlink remote control. |
| |
| config THRUSTMASTER_FF |
| tristate "ThrustMaster devices support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or |
| a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel. |
| |
| config ZEROPLUS_FF |
| tristate "Zeroplus based game controller support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Zeroplus based game controller. |
| |
| endmenu |
| |
| endif # HID_SUPPORT |