| /* |
| * linux/fs/attr.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * changes by Thomas Schoebel-Theuer |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/time.h> |
| #include <linux/mm.h> |
| #include <linux/string.h> |
| #include <linux/capability.h> |
| #include <linux/fsnotify.h> |
| #include <linux/fcntl.h> |
| #include <linux/security.h> |
| |
| /* Taken over from the old code... */ |
| |
| /* POSIX UID/GID verification for setting inode attributes. */ |
| int inode_change_ok(const struct inode *inode, struct iattr *attr) |
| { |
| int retval = -EPERM; |
| unsigned int ia_valid = attr->ia_valid; |
| |
| /* If force is set do it anyway. */ |
| if (ia_valid & ATTR_FORCE) |
| goto fine; |
| |
| /* Make sure a caller can chown. */ |
| if ((ia_valid & ATTR_UID) && |
| (current_fsuid() != inode->i_uid || |
| attr->ia_uid != inode->i_uid) && !capable(CAP_CHOWN)) |
| goto error; |
| |
| /* Make sure caller can chgrp. */ |
| if ((ia_valid & ATTR_GID) && |
| (current_fsuid() != inode->i_uid || |
| (!in_group_p(attr->ia_gid) && attr->ia_gid != inode->i_gid)) && |
| !capable(CAP_CHOWN)) |
| goto error; |
| |
| /* Make sure a caller can chmod. */ |
| if (ia_valid & ATTR_MODE) { |
| if (!is_owner_or_cap(inode)) |
| goto error; |
| /* Also check the setgid bit! */ |
| if (!in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid : |
| inode->i_gid) && !capable(CAP_FSETID)) |
| attr->ia_mode &= ~S_ISGID; |
| } |
| |
| /* Check for setting the inode time. */ |
| if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) { |
| if (!is_owner_or_cap(inode)) |
| goto error; |
| } |
| fine: |
| retval = 0; |
| error: |
| return retval; |
| } |
| EXPORT_SYMBOL(inode_change_ok); |
| |
| /** |
| * inode_newsize_ok - may this inode be truncated to a given size |
| * @inode: the inode to be truncated |
| * @offset: the new size to assign to the inode |
| * @Returns: 0 on success, -ve errno on failure |
| * |
| * inode_newsize_ok must be called with i_mutex held. |
| * |
| * inode_newsize_ok will check filesystem limits and ulimits to check that the |
| * new inode size is within limits. inode_newsize_ok will also send SIGXFSZ |
| * when necessary. Caller must not proceed with inode size change if failure is |
| * returned. @inode must be a file (not directory), with appropriate |
| * permissions to allow truncate (inode_newsize_ok does NOT check these |
| * conditions). |
| */ |
| int inode_newsize_ok(const struct inode *inode, loff_t offset) |
| { |
| if (inode->i_size < offset) { |
| unsigned long limit; |
| |
| limit = rlimit(RLIMIT_FSIZE); |
| if (limit != RLIM_INFINITY && offset > limit) |
| goto out_sig; |
| if (offset > inode->i_sb->s_maxbytes) |
| goto out_big; |
| } else { |
| /* |
| * truncation of in-use swapfiles is disallowed - it would |
| * cause subsequent swapout to scribble on the now-freed |
| * blocks. |
| */ |
| if (IS_SWAPFILE(inode)) |
| return -ETXTBSY; |
| } |
| |
| return 0; |
| out_sig: |
| send_sig(SIGXFSZ, current, 0); |
| out_big: |
| return -EFBIG; |
| } |
| EXPORT_SYMBOL(inode_newsize_ok); |
| |
| /** |
| * setattr_copy - copy simple metadata updates into the generic inode |
| * @inode: the inode to be updated |
| * @attr: the new attributes |
| * |
| * setattr_copy must be called with i_mutex held. |
| * |
| * setattr_copy updates the inode's metadata with that specified |
| * in attr. Noticably missing is inode size update, which is more complex |
| * as it requires pagecache updates. See simple_setsize. |
| * |
| * The inode is not marked as dirty after this operation. The rationale is |
| * that for "simple" filesystems, the struct inode is the inode storage. |
| * The caller is free to mark the inode dirty afterwards if needed. |
| */ |
| void setattr_copy(struct inode *inode, const struct iattr *attr) |
| { |
| unsigned int ia_valid = attr->ia_valid; |
| |
| if (ia_valid & ATTR_UID) |
| inode->i_uid = attr->ia_uid; |
| if (ia_valid & ATTR_GID) |
| inode->i_gid = attr->ia_gid; |
| if (ia_valid & ATTR_ATIME) |
| inode->i_atime = timespec_trunc(attr->ia_atime, |
| inode->i_sb->s_time_gran); |
| if (ia_valid & ATTR_MTIME) |
| inode->i_mtime = timespec_trunc(attr->ia_mtime, |
| inode->i_sb->s_time_gran); |
| if (ia_valid & ATTR_CTIME) |
| inode->i_ctime = timespec_trunc(attr->ia_ctime, |
| inode->i_sb->s_time_gran); |
| if (ia_valid & ATTR_MODE) { |
| umode_t mode = attr->ia_mode; |
| |
| if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) |
| mode &= ~S_ISGID; |
| inode->i_mode = mode; |
| } |
| } |
| EXPORT_SYMBOL(setattr_copy); |
| |
| /* |
| * note this function is deprecated, the new truncate sequence should be |
| * used instead -- see eg. simple_setsize, setattr_copy. |
| */ |
| int inode_setattr(struct inode *inode, const struct iattr *attr) |
| { |
| unsigned int ia_valid = attr->ia_valid; |
| |
| if (ia_valid & ATTR_SIZE && |
| attr->ia_size != i_size_read(inode)) { |
| int error; |
| |
| error = vmtruncate(inode, attr->ia_size); |
| if (error) |
| return error; |
| } |
| |
| setattr_copy(inode, attr); |
| |
| mark_inode_dirty(inode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(inode_setattr); |
| |
| int notify_change(struct dentry * dentry, struct iattr * attr) |
| { |
| struct inode *inode = dentry->d_inode; |
| mode_t mode = inode->i_mode; |
| int error; |
| struct timespec now; |
| unsigned int ia_valid = attr->ia_valid; |
| |
| if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) { |
| if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) |
| return -EPERM; |
| } |
| |
| now = current_fs_time(inode->i_sb); |
| |
| attr->ia_ctime = now; |
| if (!(ia_valid & ATTR_ATIME_SET)) |
| attr->ia_atime = now; |
| if (!(ia_valid & ATTR_MTIME_SET)) |
| attr->ia_mtime = now; |
| if (ia_valid & ATTR_KILL_PRIV) { |
| attr->ia_valid &= ~ATTR_KILL_PRIV; |
| ia_valid &= ~ATTR_KILL_PRIV; |
| error = security_inode_need_killpriv(dentry); |
| if (error > 0) |
| error = security_inode_killpriv(dentry); |
| if (error) |
| return error; |
| } |
| |
| /* |
| * We now pass ATTR_KILL_S*ID to the lower level setattr function so |
| * that the function has the ability to reinterpret a mode change |
| * that's due to these bits. This adds an implicit restriction that |
| * no function will ever call notify_change with both ATTR_MODE and |
| * ATTR_KILL_S*ID set. |
| */ |
| if ((ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) && |
| (ia_valid & ATTR_MODE)) |
| BUG(); |
| |
| if (ia_valid & ATTR_KILL_SUID) { |
| if (mode & S_ISUID) { |
| ia_valid = attr->ia_valid |= ATTR_MODE; |
| attr->ia_mode = (inode->i_mode & ~S_ISUID); |
| } |
| } |
| if (ia_valid & ATTR_KILL_SGID) { |
| if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) { |
| if (!(ia_valid & ATTR_MODE)) { |
| ia_valid = attr->ia_valid |= ATTR_MODE; |
| attr->ia_mode = inode->i_mode; |
| } |
| attr->ia_mode &= ~S_ISGID; |
| } |
| } |
| if (!(attr->ia_valid & ~(ATTR_KILL_SUID | ATTR_KILL_SGID))) |
| return 0; |
| |
| error = security_inode_setattr(dentry, attr); |
| if (error) |
| return error; |
| |
| if (ia_valid & ATTR_SIZE) |
| down_write(&dentry->d_inode->i_alloc_sem); |
| |
| if (inode->i_op->setattr) |
| error = inode->i_op->setattr(dentry, attr); |
| else |
| error = simple_setattr(dentry, attr); |
| |
| if (ia_valid & ATTR_SIZE) |
| up_write(&dentry->d_inode->i_alloc_sem); |
| |
| if (!error) |
| fsnotify_change(dentry, ia_valid); |
| |
| return error; |
| } |
| |
| EXPORT_SYMBOL(notify_change); |