| /* |
| * 64-bit pSeries and RS/6000 setup code. |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| * Adapted from 'alpha' version by Gary Thomas |
| * Modified by Cort Dougan (cort@cs.nmt.edu) |
| * Modified by PPC64 Team, IBM Corp |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| /* |
| * bootup setup stuff.. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/config.h> |
| #include <linux/cpu.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/tty.h> |
| #include <linux/major.h> |
| #include <linux/interrupt.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| #include <linux/utsname.h> |
| #include <linux/adb.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/iommu.h> |
| #include <asm/dma.h> |
| #include <asm/machdep.h> |
| #include <asm/irq.h> |
| #include <asm/time.h> |
| #include <asm/nvram.h> |
| #include "xics.h" |
| #include <asm/firmware.h> |
| #include <asm/pmc.h> |
| #include <asm/mpic.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/i8259.h> |
| #include <asm/udbg.h> |
| #include <asm/smp.h> |
| |
| #include "plpar_wrappers.h" |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| extern void find_udbg_vterm(void); |
| extern void system_reset_fwnmi(void); /* from head.S */ |
| extern void machine_check_fwnmi(void); /* from head.S */ |
| extern void generic_find_legacy_serial_ports(u64 *physport, |
| unsigned int *default_speed); |
| |
| int fwnmi_active; /* TRUE if an FWNMI handler is present */ |
| |
| extern void pSeries_system_reset_exception(struct pt_regs *regs); |
| extern int pSeries_machine_check_exception(struct pt_regs *regs); |
| |
| static void pseries_shared_idle(void); |
| static void pseries_dedicated_idle(void); |
| |
| struct mpic *pSeries_mpic; |
| |
| void pSeries_show_cpuinfo(struct seq_file *m) |
| { |
| struct device_node *root; |
| const char *model = ""; |
| |
| root = of_find_node_by_path("/"); |
| if (root) |
| model = get_property(root, "model", NULL); |
| seq_printf(m, "machine\t\t: CHRP %s\n", model); |
| of_node_put(root); |
| } |
| |
| /* Initialize firmware assisted non-maskable interrupts if |
| * the firmware supports this feature. |
| * |
| */ |
| static void __init fwnmi_init(void) |
| { |
| int ret; |
| int ibm_nmi_register = rtas_token("ibm,nmi-register"); |
| if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE) |
| return; |
| ret = rtas_call(ibm_nmi_register, 2, 1, NULL, |
| __pa((unsigned long)system_reset_fwnmi), |
| __pa((unsigned long)machine_check_fwnmi)); |
| if (ret == 0) |
| fwnmi_active = 1; |
| } |
| |
| static void __init pSeries_init_mpic(void) |
| { |
| unsigned int *addrp; |
| struct device_node *np; |
| unsigned long intack = 0; |
| |
| /* All ISUs are setup, complete initialization */ |
| mpic_init(pSeries_mpic); |
| |
| /* Check what kind of cascade ACK we have */ |
| if (!(np = of_find_node_by_name(NULL, "pci")) |
| || !(addrp = (unsigned int *) |
| get_property(np, "8259-interrupt-acknowledge", NULL))) |
| printk(KERN_ERR "Cannot find pci to get ack address\n"); |
| else |
| intack = addrp[prom_n_addr_cells(np)-1]; |
| of_node_put(np); |
| |
| /* Setup the legacy interrupts & controller */ |
| i8259_init(intack, 0); |
| |
| /* Hook cascade to mpic */ |
| mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); |
| } |
| |
| static void __init pSeries_setup_mpic(void) |
| { |
| unsigned int *opprop; |
| unsigned long openpic_addr = 0; |
| unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS]; |
| struct device_node *root; |
| int irq_count; |
| |
| /* Find the Open PIC if present */ |
| root = of_find_node_by_path("/"); |
| opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL); |
| if (opprop != 0) { |
| int n = prom_n_addr_cells(root); |
| |
| for (openpic_addr = 0; n > 0; --n) |
| openpic_addr = (openpic_addr << 32) + *opprop++; |
| printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); |
| } |
| of_node_put(root); |
| |
| BUG_ON(openpic_addr == 0); |
| |
| /* Get the sense values from OF */ |
| prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS); |
| |
| /* Setup the openpic driver */ |
| irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ |
| pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY, |
| 16, 16, irq_count, /* isu size, irq offset, irq count */ |
| NR_IRQS - 4, /* ipi offset */ |
| senses, irq_count, /* sense & sense size */ |
| " MPIC "); |
| } |
| |
| static void pseries_lpar_enable_pmcs(void) |
| { |
| unsigned long set, reset; |
| |
| power4_enable_pmcs(); |
| |
| set = 1UL << 63; |
| reset = 0; |
| plpar_hcall_norets(H_PERFMON, set, reset); |
| |
| /* instruct hypervisor to maintain PMCs */ |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) |
| get_paca()->lppaca.pmcregs_in_use = 1; |
| } |
| |
| static void __init pSeries_setup_arch(void) |
| { |
| /* Fixup ppc_md depending on the type of interrupt controller */ |
| if (ppc64_interrupt_controller == IC_OPEN_PIC) { |
| ppc_md.init_IRQ = pSeries_init_mpic; |
| ppc_md.get_irq = mpic_get_irq; |
| /* Allocate the mpic now, so that find_and_init_phbs() can |
| * fill the ISUs */ |
| pSeries_setup_mpic(); |
| } else { |
| ppc_md.init_IRQ = xics_init_IRQ; |
| ppc_md.get_irq = xics_get_irq; |
| } |
| |
| #ifdef CONFIG_SMP |
| smp_init_pSeries(); |
| #endif |
| /* openpic global configuration register (64-bit format). */ |
| /* openpic Interrupt Source Unit pointer (64-bit format). */ |
| /* python0 facility area (mmio) (64-bit format) REAL address. */ |
| |
| /* init to some ~sane value until calibrate_delay() runs */ |
| loops_per_jiffy = 50000000; |
| |
| if (ROOT_DEV == 0) { |
| printk("No ramdisk, default root is /dev/sda2\n"); |
| ROOT_DEV = Root_SDA2; |
| } |
| |
| fwnmi_init(); |
| |
| /* Find and initialize PCI host bridges */ |
| init_pci_config_tokens(); |
| find_and_init_phbs(); |
| eeh_init(); |
| |
| pSeries_nvram_init(); |
| |
| /* Choose an idle loop */ |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) { |
| vpa_init(boot_cpuid); |
| if (get_paca()->lppaca.shared_proc) { |
| printk(KERN_INFO "Using shared processor idle loop\n"); |
| ppc_md.idle_loop = pseries_shared_idle; |
| } else { |
| printk(KERN_INFO "Using dedicated idle loop\n"); |
| ppc_md.idle_loop = pseries_dedicated_idle; |
| } |
| } else { |
| printk(KERN_INFO "Using default idle loop\n"); |
| ppc_md.idle_loop = default_idle; |
| } |
| |
| if (platform_is_lpar()) |
| ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; |
| else |
| ppc_md.enable_pmcs = power4_enable_pmcs; |
| } |
| |
| static int __init pSeries_init_panel(void) |
| { |
| /* Manually leave the kernel version on the panel. */ |
| ppc_md.progress("Linux ppc64\n", 0); |
| ppc_md.progress(system_utsname.version, 0); |
| |
| return 0; |
| } |
| arch_initcall(pSeries_init_panel); |
| |
| |
| /* Build up the ppc64_firmware_features bitmask field |
| * using contents of device-tree/ibm,hypertas-functions. |
| * Ultimately this functionality may be moved into prom.c prom_init(). |
| */ |
| static void __init fw_feature_init(void) |
| { |
| struct device_node * dn; |
| char * hypertas; |
| unsigned int len; |
| |
| DBG(" -> fw_feature_init()\n"); |
| |
| ppc64_firmware_features = 0; |
| dn = of_find_node_by_path("/rtas"); |
| if (dn == NULL) { |
| printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n"); |
| goto no_rtas; |
| } |
| |
| hypertas = get_property(dn, "ibm,hypertas-functions", &len); |
| if (hypertas) { |
| while (len > 0){ |
| int i, hypertas_len; |
| /* check value against table of strings */ |
| for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) { |
| if ((firmware_features_table[i].name) && |
| (strcmp(firmware_features_table[i].name,hypertas))==0) { |
| /* we have a match */ |
| ppc64_firmware_features |= |
| (firmware_features_table[i].val); |
| break; |
| } |
| } |
| hypertas_len = strlen(hypertas); |
| len -= hypertas_len +1; |
| hypertas+= hypertas_len +1; |
| } |
| } |
| |
| of_node_put(dn); |
| no_rtas: |
| |
| DBG(" <- fw_feature_init()\n"); |
| } |
| |
| |
| static void __init pSeries_discover_pic(void) |
| { |
| struct device_node *np; |
| char *typep; |
| |
| /* |
| * Setup interrupt mapping options that are needed for finish_device_tree |
| * to properly parse the OF interrupt tree & do the virtual irq mapping |
| */ |
| __irq_offset_value = NUM_ISA_INTERRUPTS; |
| ppc64_interrupt_controller = IC_INVALID; |
| for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { |
| typep = (char *)get_property(np, "compatible", NULL); |
| if (strstr(typep, "open-pic")) |
| ppc64_interrupt_controller = IC_OPEN_PIC; |
| else if (strstr(typep, "ppc-xicp")) |
| ppc64_interrupt_controller = IC_PPC_XIC; |
| else |
| printk("pSeries_discover_pic: failed to recognize" |
| " interrupt-controller\n"); |
| break; |
| } |
| } |
| |
| static void pSeries_mach_cpu_die(void) |
| { |
| local_irq_disable(); |
| idle_task_exit(); |
| /* Some hardware requires clearing the CPPR, while other hardware does not |
| * it is safe either way |
| */ |
| pSeriesLP_cppr_info(0, 0); |
| rtas_stop_self(); |
| /* Should never get here... */ |
| BUG(); |
| for(;;); |
| } |
| |
| static int pseries_set_dabr(unsigned long dabr) |
| { |
| return plpar_hcall_norets(H_SET_DABR, dabr); |
| } |
| |
| static int pseries_set_xdabr(unsigned long dabr) |
| { |
| /* We want to catch accesses from kernel and userspace */ |
| return plpar_hcall_norets(H_SET_XDABR, dabr, |
| H_DABRX_KERNEL | H_DABRX_USER); |
| } |
| |
| /* |
| * Early initialization. Relocation is on but do not reference unbolted pages |
| */ |
| static void __init pSeries_init_early(void) |
| { |
| void *comport; |
| int iommu_off = 0; |
| unsigned int default_speed; |
| u64 physport; |
| |
| DBG(" -> pSeries_init_early()\n"); |
| |
| fw_feature_init(); |
| |
| if (platform_is_lpar()) |
| hpte_init_lpar(); |
| else { |
| hpte_init_native(); |
| iommu_off = (of_chosen && |
| get_property(of_chosen, "linux,iommu-off", NULL)); |
| } |
| |
| generic_find_legacy_serial_ports(&physport, &default_speed); |
| |
| if (platform_is_lpar()) |
| find_udbg_vterm(); |
| else if (physport) { |
| /* Map the uart for udbg. */ |
| comport = (void *)ioremap(physport, 16); |
| udbg_init_uart(comport, default_speed); |
| |
| DBG("Hello World !\n"); |
| } |
| |
| if (firmware_has_feature(FW_FEATURE_DABR)) |
| ppc_md.set_dabr = pseries_set_dabr; |
| else if (firmware_has_feature(FW_FEATURE_XDABR)) |
| ppc_md.set_dabr = pseries_set_xdabr; |
| |
| iommu_init_early_pSeries(); |
| |
| pSeries_discover_pic(); |
| |
| DBG(" <- pSeries_init_early()\n"); |
| } |
| |
| |
| static int pSeries_check_legacy_ioport(unsigned int baseport) |
| { |
| struct device_node *np; |
| |
| #define I8042_DATA_REG 0x60 |
| #define FDC_BASE 0x3f0 |
| |
| |
| switch(baseport) { |
| case I8042_DATA_REG: |
| np = of_find_node_by_type(NULL, "8042"); |
| if (np == NULL) |
| return -ENODEV; |
| of_node_put(np); |
| break; |
| case FDC_BASE: |
| np = of_find_node_by_type(NULL, "fdc"); |
| if (np == NULL) |
| return -ENODEV; |
| of_node_put(np); |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| extern struct machdep_calls pSeries_md; |
| |
| static int __init pSeries_probe(int platform) |
| { |
| if (platform != PLATFORM_PSERIES && |
| platform != PLATFORM_PSERIES_LPAR) |
| return 0; |
| |
| /* if we have some ppc_md fixups for LPAR to do, do |
| * it here ... |
| */ |
| |
| return 1; |
| } |
| |
| DECLARE_PER_CPU(unsigned long, smt_snooze_delay); |
| |
| static inline void dedicated_idle_sleep(unsigned int cpu) |
| { |
| struct paca_struct *ppaca = &paca[cpu ^ 1]; |
| |
| /* Only sleep if the other thread is not idle */ |
| if (!(ppaca->lppaca.idle)) { |
| local_irq_disable(); |
| |
| /* |
| * We are about to sleep the thread and so wont be polling any |
| * more. |
| */ |
| clear_thread_flag(TIF_POLLING_NRFLAG); |
| smp_mb__after_clear_bit(); |
| |
| /* |
| * SMT dynamic mode. Cede will result in this thread going |
| * dormant, if the partner thread is still doing work. Thread |
| * wakes up if partner goes idle, an interrupt is presented, or |
| * a prod occurs. Returning from the cede enables external |
| * interrupts. |
| */ |
| if (!need_resched()) |
| cede_processor(); |
| else |
| local_irq_enable(); |
| set_thread_flag(TIF_POLLING_NRFLAG); |
| } else { |
| /* |
| * Give the HV an opportunity at the processor, since we are |
| * not doing any work. |
| */ |
| poll_pending(); |
| } |
| } |
| |
| static void pseries_dedicated_idle(void) |
| { |
| struct paca_struct *lpaca = get_paca(); |
| unsigned int cpu = smp_processor_id(); |
| unsigned long start_snooze; |
| unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); |
| set_thread_flag(TIF_POLLING_NRFLAG); |
| |
| while (1) { |
| /* |
| * Indicate to the HV that we are idle. Now would be |
| * a good time to find other work to dispatch. |
| */ |
| lpaca->lppaca.idle = 1; |
| |
| if (!need_resched()) { |
| start_snooze = get_tb() + |
| *smt_snooze_delay * tb_ticks_per_usec; |
| |
| while (!need_resched() && !cpu_is_offline(cpu)) { |
| ppc64_runlatch_off(); |
| |
| /* |
| * Go into low thread priority and possibly |
| * low power mode. |
| */ |
| HMT_low(); |
| HMT_very_low(); |
| |
| if (*smt_snooze_delay != 0 && |
| get_tb() > start_snooze) { |
| HMT_medium(); |
| dedicated_idle_sleep(cpu); |
| } |
| |
| } |
| |
| HMT_medium(); |
| } |
| |
| lpaca->lppaca.idle = 0; |
| ppc64_runlatch_on(); |
| |
| preempt_enable_no_resched(); |
| schedule(); |
| preempt_disable(); |
| |
| if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) |
| cpu_die(); |
| } |
| } |
| |
| static void pseries_shared_idle(void) |
| { |
| struct paca_struct *lpaca = get_paca(); |
| unsigned int cpu = smp_processor_id(); |
| |
| while (1) { |
| /* |
| * Indicate to the HV that we are idle. Now would be |
| * a good time to find other work to dispatch. |
| */ |
| lpaca->lppaca.idle = 1; |
| |
| while (!need_resched() && !cpu_is_offline(cpu)) { |
| local_irq_disable(); |
| ppc64_runlatch_off(); |
| |
| /* |
| * Yield the processor to the hypervisor. We return if |
| * an external interrupt occurs (which are driven prior |
| * to returning here) or if a prod occurs from another |
| * processor. When returning here, external interrupts |
| * are enabled. |
| * |
| * Check need_resched() again with interrupts disabled |
| * to avoid a race. |
| */ |
| if (!need_resched()) |
| cede_processor(); |
| else |
| local_irq_enable(); |
| |
| HMT_medium(); |
| } |
| |
| lpaca->lppaca.idle = 0; |
| ppc64_runlatch_on(); |
| |
| preempt_enable_no_resched(); |
| schedule(); |
| preempt_disable(); |
| |
| if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) |
| cpu_die(); |
| } |
| } |
| |
| static int pSeries_pci_probe_mode(struct pci_bus *bus) |
| { |
| if (platform_is_lpar()) |
| return PCI_PROBE_DEVTREE; |
| return PCI_PROBE_NORMAL; |
| } |
| |
| #ifdef CONFIG_KEXEC |
| static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) |
| { |
| /* Don't risk a hypervisor call if we're crashing */ |
| if (!crash_shutdown) { |
| unsigned long vpa = __pa(&get_paca()->lppaca); |
| |
| if (unregister_vpa(hard_smp_processor_id(), vpa)) { |
| printk("VPA deregistration of cpu %u (hw_cpu_id %d) " |
| "failed\n", smp_processor_id(), |
| hard_smp_processor_id()); |
| } |
| } |
| |
| if (ppc64_interrupt_controller == IC_OPEN_PIC) |
| mpic_teardown_this_cpu(secondary); |
| else |
| xics_teardown_cpu(secondary); |
| } |
| #endif |
| |
| struct machdep_calls __initdata pSeries_md = { |
| .probe = pSeries_probe, |
| .setup_arch = pSeries_setup_arch, |
| .init_early = pSeries_init_early, |
| .show_cpuinfo = pSeries_show_cpuinfo, |
| .log_error = pSeries_log_error, |
| .pcibios_fixup = pSeries_final_fixup, |
| .pci_probe_mode = pSeries_pci_probe_mode, |
| .irq_bus_setup = pSeries_irq_bus_setup, |
| .restart = rtas_restart, |
| .power_off = rtas_power_off, |
| .halt = rtas_halt, |
| .panic = rtas_os_term, |
| .cpu_die = pSeries_mach_cpu_die, |
| .get_boot_time = rtas_get_boot_time, |
| .get_rtc_time = rtas_get_rtc_time, |
| .set_rtc_time = rtas_set_rtc_time, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = rtas_progress, |
| .check_legacy_ioport = pSeries_check_legacy_ioport, |
| .system_reset_exception = pSeries_system_reset_exception, |
| .machine_check_exception = pSeries_machine_check_exception, |
| #ifdef CONFIG_KEXEC |
| .kexec_cpu_down = pseries_kexec_cpu_down, |
| #endif |
| }; |