| /* |
| * MPC8548 CDS Device Tree Source |
| * |
| * Copyright 2006, 2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "MPC8548CDS"; |
| compatible = "MPC8548CDS", "MPC85xxCDS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| /* |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| */ |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8548@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; // 33 MHz, from uboot |
| bus-frequency = <0>; // 166 MHz |
| clock-frequency = <0>; // 825 MHz, from uboot |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x8000000>; // 128M at 0x0 |
| }; |
| |
| soc8548@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0x0 0xe0000000 0x100000>; |
| reg = <0xe0000000 0x1000>; // CCSRBAR |
| bus-frequency = <0>; |
| |
| memory-controller@2000 { |
| compatible = "fsl,8548-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| }; |
| |
| l2-cache-controller@20000 { |
| compatible = "fsl,8548-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x80000>; // L2, 512K |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x24520 0x20>; |
| |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <29 2 30 2 34 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy0>; |
| }; |
| |
| enet1: ethernet@25000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <35 2 36 2 40 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy1>; |
| }; |
| |
| /* eTSEC 3/4 are currently broken |
| enet2: ethernet@26000 { |
| cell-index = <2>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x26000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <31 2 32 2 33 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy2>; |
| }; |
| |
| enet3: ethernet@27000 { |
| cell-index = <3>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x27000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <37 2 38 2 39 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy3>; |
| }; |
| */ |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; // reg base, size |
| clock-frequency = <0>; // should we fill in in uboot? |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; // reg base, size |
| clock-frequency = <0>; // should we fill in in uboot? |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities reg |
| compatible = "fsl,mpc8548-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| mpic: pic@40000 { |
| clock-frequency = <0>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| big-endian; |
| }; |
| }; |
| |
| pci0: pci@e0008000 { |
| cell-index = <0>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x4 (PCIX Slot 2) */ |
| 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x5 (PCIX Slot 3) */ |
| 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 |
| 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 |
| 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 |
| 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 |
| |
| /* IDSEL 0x6 (PCIX Slot 4) */ |
| 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 |
| 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 |
| |
| /* IDSEL 0x8 (PCIX Slot 5) */ |
| 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0xC (Tsi310 bridge) */ |
| 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x14 (Slot 2) */ |
| 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x15 (Slot 3) */ |
| 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 |
| 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 |
| 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 |
| 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 |
| |
| /* IDSEL 0x16 (Slot 4) */ |
| 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 |
| 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 |
| |
| /* IDSEL 0x18 (Slot 5) */ |
| 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ |
| 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <24 2>; |
| bus-range = <0 0>; |
| ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008000 0x1000>; |
| compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| |
| pci_bridge@1c { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x00 (PrPMC Site) */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x04 (VIA chip) */ |
| 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| |
| /* IDSEL 0x05 (8139) */ |
| 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 |
| |
| /* IDSEL 0x06 (Slot 6) */ |
| 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 |
| 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 |
| |
| /* IDESL 0x07 (Slot 7) */ |
| 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 |
| 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 |
| 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 |
| 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; |
| |
| reg = <0xe000 0x0 0x0 0x0 0x0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| ranges = <0x2000000 0x0 0x80000000 |
| 0x2000000 0x0 0x80000000 |
| 0x0 0x20000000 |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x80000>; |
| clock-frequency = <33333333>; |
| |
| isa@4 { |
| device_type = "isa"; |
| #interrupt-cells = <2>; |
| #size-cells = <1>; |
| #address-cells = <2>; |
| reg = <0x2000 0x0 0x0 0x0 0x0>; |
| ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; |
| interrupt-parent = <&i8259>; |
| |
| i8259: interrupt-controller@20 { |
| interrupt-controller; |
| device_type = "interrupt-controller"; |
| reg = <0x1 0x20 0x2 |
| 0x1 0xa0 0x2 |
| 0x1 0x4d0 0x2>; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "chrp,iic"; |
| interrupts = <0 1>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| rtc@70 { |
| compatible = "pnpPNP,b00"; |
| reg = <0x1 0x70 0x2>; |
| }; |
| }; |
| }; |
| }; |
| |
| pci1: pci@e0009000 { |
| cell-index = <1>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x15 */ |
| 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 |
| 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <25 2>; |
| bus-range = <0 0>; |
| ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0009000 0x1000>; |
| compatible = "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| }; |
| |
| pci2: pcie@e000a000 { |
| cell-index = <2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x0 (PEX) */ |
| 00000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 00000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 00000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <26 2>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; |
| clock-frequency = <33333333>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe000a000 0x1000>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x8000000>; |
| }; |
| }; |
| }; |