| /* |
| * OMAP3xxx PRM module functions |
| * |
| * Copyright (C) 2010-2012 Texas Instruments, Inc. |
| * Copyright (C) 2010 Nokia Corporation |
| * BenoƮt Cousson |
| * Paul Walmsley |
| * Rajendra Nayak <rnayak@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| |
| #include "soc.h" |
| #include "common.h" |
| #include "vp.h" |
| #include "powerdomain.h" |
| #include "prm3xxx.h" |
| #include "prm2xxx_3xxx.h" |
| #include "cm2xxx_3xxx.h" |
| #include "prm-regbits-34xx.h" |
| |
| static const struct omap_prcm_irq omap3_prcm_irqs[] = { |
| OMAP_PRCM_IRQ("wkup", 0, 0), |
| OMAP_PRCM_IRQ("io", 9, 1), |
| }; |
| |
| static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { |
| .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, |
| .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, |
| .nr_regs = 1, |
| .irqs = omap3_prcm_irqs, |
| .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), |
| .irq = 11 + OMAP_INTC_START, |
| .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, |
| .ocp_barrier = &omap3xxx_prm_ocp_barrier, |
| .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, |
| .restore_irqen = &omap3xxx_prm_restore_irqen, |
| }; |
| |
| /* |
| * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware |
| * register (which are specific to OMAP3xxx SoCs) to reset source ID |
| * bit shifts (which is an OMAP SoC-independent enumeration) |
| */ |
| static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = { |
| { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, |
| { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, |
| { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, |
| { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, |
| { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, |
| { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, |
| { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT, |
| OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, |
| { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT, |
| OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, |
| { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, |
| { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT }, |
| { -1, -1 }, |
| }; |
| |
| /* PRM VP */ |
| |
| /* |
| * struct omap3_vp - OMAP3 VP register access description. |
| * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg |
| */ |
| struct omap3_vp { |
| u32 tranxdone_status; |
| }; |
| |
| static struct omap3_vp omap3_vp[] = { |
| [OMAP3_VP_VDD_MPU_ID] = { |
| .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, |
| }, |
| [OMAP3_VP_VDD_CORE_ID] = { |
| .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, |
| }, |
| }; |
| |
| #define MAX_VP_ID ARRAY_SIZE(omap3_vp); |
| |
| u32 omap3_prm_vp_check_txdone(u8 vp_id) |
| { |
| struct omap3_vp *vp = &omap3_vp[vp_id]; |
| u32 irqstatus; |
| |
| irqstatus = omap2_prm_read_mod_reg(OCP_MOD, |
| OMAP3_PRM_IRQSTATUS_MPU_OFFSET); |
| return irqstatus & vp->tranxdone_status; |
| } |
| |
| void omap3_prm_vp_clear_txdone(u8 vp_id) |
| { |
| struct omap3_vp *vp = &omap3_vp[vp_id]; |
| |
| omap2_prm_write_mod_reg(vp->tranxdone_status, |
| OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); |
| } |
| |
| u32 omap3_prm_vcvp_read(u8 offset) |
| { |
| return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); |
| } |
| |
| void omap3_prm_vcvp_write(u32 val, u8 offset) |
| { |
| omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); |
| } |
| |
| u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) |
| { |
| return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); |
| } |
| |
| /** |
| * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC |
| * |
| * Set the DPLL3 reset bit, which should reboot the SoC. This is the |
| * recommended way to restart the SoC, considering Errata i520. No |
| * return value. |
| */ |
| void omap3xxx_prm_dpll3_reset(void) |
| { |
| omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, |
| OMAP2_RM_RSTCTRL); |
| /* OCP barrier */ |
| omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); |
| } |
| |
| /** |
| * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events |
| * @events: ptr to a u32, preallocated by caller |
| * |
| * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM |
| * MPU IRQs, and store the result into the u32 pointed to by @events. |
| * No return value. |
| */ |
| void omap3xxx_prm_read_pending_irqs(unsigned long *events) |
| { |
| u32 mask, st; |
| |
| /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ |
| mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); |
| st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); |
| |
| events[0] = mask & st; |
| } |
| |
| /** |
| * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete |
| * |
| * Force any buffered writes to the PRM IP block to complete. Needed |
| * by the PRM IRQ handler, which reads and writes directly to the IP |
| * block, to avoid race conditions after acknowledging or clearing IRQ |
| * bits. No return value. |
| */ |
| void omap3xxx_prm_ocp_barrier(void) |
| { |
| omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); |
| } |
| |
| /** |
| * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg |
| * @saved_mask: ptr to a u32 array to save IRQENABLE bits |
| * |
| * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask |
| * must be allocated by the caller. Intended to be used in the PRM |
| * interrupt handler suspend callback. The OCP barrier is needed to |
| * ensure the write to disable PRM interrupts reaches the PRM before |
| * returning; otherwise, spurious interrupts might occur. No return |
| * value. |
| */ |
| void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) |
| { |
| saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, |
| OMAP3_PRM_IRQENABLE_MPU_OFFSET); |
| omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); |
| |
| /* OCP barrier */ |
| omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); |
| } |
| |
| /** |
| * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args |
| * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously |
| * |
| * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended |
| * to be used in the PRM interrupt handler resume callback to restore |
| * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP |
| * barrier should be needed here; any pending PRM interrupts will fire |
| * once the writes reach the PRM. No return value. |
| */ |
| void omap3xxx_prm_restore_irqen(u32 *saved_mask) |
| { |
| omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, |
| OMAP3_PRM_IRQENABLE_MPU_OFFSET); |
| } |
| |
| /** |
| * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain |
| * |
| * Clear any previously-latched I/O wakeup events and ensure that the |
| * I/O wakeup gates are aligned with the current mux settings. Works |
| * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then |
| * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No |
| * return value. |
| */ |
| void omap3xxx_prm_reconfigure_io_chain(void) |
| { |
| int i = 0; |
| |
| omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, |
| PM_WKEN); |
| |
| omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & |
| OMAP3430_ST_IO_CHAIN_MASK, |
| MAX_IOPAD_LATCH_TIME, i); |
| if (i == MAX_IOPAD_LATCH_TIME) |
| pr_warn("PRM: I/O chain clock line assertion timed out\n"); |
| |
| omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, |
| PM_WKEN); |
| |
| omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, |
| PM_WKST); |
| |
| omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); |
| } |
| |
| /** |
| * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches |
| * |
| * Activates the I/O wakeup event latches and allows events logged by |
| * those latches to signal a wakeup event to the PRCM. For I/O |
| * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux |
| * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. |
| * No return value. |
| */ |
| static void __init omap3xxx_prm_enable_io_wakeup(void) |
| { |
| if (omap3_has_io_wakeup()) |
| omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, |
| PM_WKEN); |
| } |
| |
| /** |
| * omap3xxx_prm_read_reset_sources - return the last SoC reset source |
| * |
| * Return a u32 representing the last reset sources of the SoC. The |
| * returned reset source bits are standardized across OMAP SoCs. |
| */ |
| static u32 omap3xxx_prm_read_reset_sources(void) |
| { |
| struct prm_reset_src_map *p; |
| u32 r = 0; |
| u32 v; |
| |
| v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); |
| |
| p = omap3xxx_prm_reset_src_map; |
| while (p->reg_shift >= 0 && p->std_shift >= 0) { |
| if (v & (1 << p->reg_shift)) |
| r |= 1 << p->std_shift; |
| p++; |
| } |
| |
| return r; |
| } |
| |
| /* Powerdomain low-level functions */ |
| |
| /* Applicable only for OMAP3. Not supported on OMAP2 */ |
| static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, |
| OMAP3430_PM_PREPWSTST, |
| OMAP3430_LASTPOWERSTATEENTERED_MASK); |
| } |
| |
| static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, |
| OMAP2_PM_PWSTST, |
| OMAP3430_LOGICSTATEST_MASK); |
| } |
| |
| static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, |
| OMAP2_PM_PWSTCTRL, |
| OMAP3430_LOGICSTATEST_MASK); |
| } |
| |
| static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, |
| OMAP3430_PM_PREPWSTST, |
| OMAP3430_LASTLOGICSTATEENTERED_MASK); |
| } |
| |
| static int omap3_get_mem_bank_lastmemst_mask(u8 bank) |
| { |
| switch (bank) { |
| case 0: |
| return OMAP3430_LASTMEM1STATEENTERED_MASK; |
| case 1: |
| return OMAP3430_LASTMEM2STATEENTERED_MASK; |
| case 2: |
| return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; |
| case 3: |
| return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; |
| default: |
| WARN_ON(1); /* should never happen */ |
| return -EEXIST; |
| } |
| return 0; |
| } |
| |
| static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) |
| { |
| u32 m; |
| |
| m = omap3_get_mem_bank_lastmemst_mask(bank); |
| |
| return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, |
| OMAP3430_PM_PREPWSTST, m); |
| } |
| |
| static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) |
| { |
| omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); |
| return 0; |
| } |
| |
| static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_rmw_mod_reg_bits(0, |
| 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, |
| pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); |
| } |
| |
| static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) |
| { |
| return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, |
| 0, pwrdm->prcm_offs, |
| OMAP2_PM_PWSTCTRL); |
| } |
| |
| struct pwrdm_ops omap3_pwrdm_operations = { |
| .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, |
| .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, |
| .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, |
| .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, |
| .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, |
| .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, |
| .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, |
| .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, |
| .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, |
| .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, |
| .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, |
| .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, |
| .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, |
| .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, |
| .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, |
| .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, |
| .pwrdm_wait_transition = omap2_pwrdm_wait_transition, |
| }; |
| |
| /* |
| * |
| */ |
| |
| static struct prm_ll_data omap3xxx_prm_ll_data = { |
| .read_reset_sources = &omap3xxx_prm_read_reset_sources, |
| }; |
| |
| int __init omap3xxx_prm_init(void) |
| { |
| if (!cpu_is_omap34xx()) |
| return 0; |
| |
| return prm_register(&omap3xxx_prm_ll_data); |
| } |
| |
| static int __init omap3xxx_prm_late_init(void) |
| { |
| int ret; |
| |
| if (!cpu_is_omap34xx()) |
| return 0; |
| |
| omap3xxx_prm_enable_io_wakeup(); |
| ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); |
| if (!ret) |
| irq_set_status_flags(omap_prcm_event_to_irq("io"), |
| IRQ_NOAUTOEN); |
| |
| return ret; |
| } |
| subsys_initcall(omap3xxx_prm_late_init); |
| |
| static void __exit omap3xxx_prm_exit(void) |
| { |
| if (!cpu_is_omap34xx()) |
| return; |
| |
| /* Should never happen */ |
| WARN(prm_unregister(&omap3xxx_prm_ll_data), |
| "%s: prm_ll_data function pointer mismatch\n", __func__); |
| } |
| __exitcall(omap3xxx_prm_exit); |