| /* |
| * drivers/s390/char/tape.h |
| * tape device driver for 3480/3490E/3590 tapes. |
| * |
| * S390 and zSeries version |
| * Copyright IBM Corp. 2001, 2009 |
| * Author(s): Carsten Otte <cotte@de.ibm.com> |
| * Tuan Ngo-Anh <ngoanh@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Stefan Bader <shbader@de.ibm.com> |
| */ |
| |
| #ifndef _TAPE_H |
| #define _TAPE_H |
| |
| #include <asm/ccwdev.h> |
| #include <asm/debug.h> |
| #include <asm/idals.h> |
| #include <linux/blkdev.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mtio.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| |
| struct gendisk; |
| |
| /* |
| * Define DBF_LIKE_HELL for lots of messages in the debug feature. |
| */ |
| #define DBF_LIKE_HELL |
| #ifdef DBF_LIKE_HELL |
| #define DBF_LH(level, str, ...) \ |
| do { \ |
| debug_sprintf_event(TAPE_DBF_AREA, level, str, ## __VA_ARGS__); \ |
| } while (0) |
| #else |
| #define DBF_LH(level, str, ...) do {} while(0) |
| #endif |
| |
| /* |
| * macros s390 debug feature (dbf) |
| */ |
| #define DBF_EVENT(d_level, d_str...) \ |
| do { \ |
| debug_sprintf_event(TAPE_DBF_AREA, d_level, d_str); \ |
| } while (0) |
| |
| #define DBF_EXCEPTION(d_level, d_str...) \ |
| do { \ |
| debug_sprintf_exception(TAPE_DBF_AREA, d_level, d_str); \ |
| } while (0) |
| |
| #define TAPE_VERSION_MAJOR 2 |
| #define TAPE_VERSION_MINOR 0 |
| #define TAPE_MAGIC "tape" |
| |
| #define TAPE_MINORS_PER_DEV 2 /* two minors per device */ |
| #define TAPEBLOCK_HSEC_SIZE 2048 |
| #define TAPEBLOCK_HSEC_S2B 2 |
| #define TAPEBLOCK_RETRIES 5 |
| |
| enum tape_medium_state { |
| MS_UNKNOWN, |
| MS_LOADED, |
| MS_UNLOADED, |
| MS_SIZE |
| }; |
| |
| enum tape_state { |
| TS_UNUSED=0, |
| TS_IN_USE, |
| TS_BLKUSE, |
| TS_INIT, |
| TS_NOT_OPER, |
| TS_SIZE |
| }; |
| |
| enum tape_op { |
| TO_BLOCK, /* Block read */ |
| TO_BSB, /* Backward space block */ |
| TO_BSF, /* Backward space filemark */ |
| TO_DSE, /* Data security erase */ |
| TO_FSB, /* Forward space block */ |
| TO_FSF, /* Forward space filemark */ |
| TO_LBL, /* Locate block label */ |
| TO_NOP, /* No operation */ |
| TO_RBA, /* Read backward */ |
| TO_RBI, /* Read block information */ |
| TO_RFO, /* Read forward */ |
| TO_REW, /* Rewind tape */ |
| TO_RUN, /* Rewind and unload tape */ |
| TO_WRI, /* Write block */ |
| TO_WTM, /* Write tape mark */ |
| TO_MSEN, /* Medium sense */ |
| TO_LOAD, /* Load tape */ |
| TO_READ_CONFIG, /* Read configuration data */ |
| TO_READ_ATTMSG, /* Read attention message */ |
| TO_DIS, /* Tape display */ |
| TO_ASSIGN, /* Assign tape to channel path */ |
| TO_UNASSIGN, /* Unassign tape from channel path */ |
| TO_CRYPT_ON, /* Enable encrpytion */ |
| TO_CRYPT_OFF, /* Disable encrpytion */ |
| TO_KEKL_SET, /* Set KEK label */ |
| TO_KEKL_QUERY, /* Query KEK label */ |
| TO_RDC, /* Read device characteristics */ |
| TO_SIZE, /* #entries in tape_op_t */ |
| }; |
| |
| /* Forward declaration */ |
| struct tape_device; |
| |
| /* tape_request->status can be: */ |
| enum tape_request_status { |
| TAPE_REQUEST_INIT, /* request is ready to be processed */ |
| TAPE_REQUEST_QUEUED, /* request is queued to be processed */ |
| TAPE_REQUEST_IN_IO, /* request is currently in IO */ |
| TAPE_REQUEST_DONE, /* request is completed. */ |
| TAPE_REQUEST_CANCEL, /* request should be canceled. */ |
| TAPE_REQUEST_LONG_BUSY, /* request has to be restarted after long busy */ |
| }; |
| |
| /* Tape CCW request */ |
| struct tape_request { |
| struct list_head list; /* list head for request queueing. */ |
| struct tape_device *device; /* tape device of this request */ |
| struct ccw1 *cpaddr; /* address of the channel program. */ |
| void *cpdata; /* pointer to ccw data. */ |
| enum tape_request_status status;/* status of this request */ |
| int options; /* options for execution. */ |
| int retries; /* retry counter for error recovery. */ |
| int rescnt; /* residual count from devstat. */ |
| |
| /* Callback for delivering final status. */ |
| void (*callback)(struct tape_request *, void *); |
| void *callback_data; |
| |
| enum tape_op op; |
| int rc; |
| }; |
| |
| /* Function type for magnetic tape commands */ |
| typedef int (*tape_mtop_fn)(struct tape_device *, int); |
| |
| /* Size of the array containing the mtops for a discipline */ |
| #define TAPE_NR_MTOPS (MTMKPART+1) |
| |
| /* Tape Discipline */ |
| struct tape_discipline { |
| struct module *owner; |
| int (*setup_device)(struct tape_device *); |
| void (*cleanup_device)(struct tape_device *); |
| int (*irq)(struct tape_device *, struct tape_request *, struct irb *); |
| struct tape_request *(*read_block)(struct tape_device *, size_t); |
| struct tape_request *(*write_block)(struct tape_device *, size_t); |
| void (*process_eov)(struct tape_device*); |
| /* ioctl function for additional ioctls. */ |
| int (*ioctl_fn)(struct tape_device *, unsigned int, unsigned long); |
| /* Array of tape commands with TAPE_NR_MTOPS entries */ |
| tape_mtop_fn *mtop_array; |
| }; |
| |
| /* |
| * The discipline irq function either returns an error code (<0) which |
| * means that the request has failed with an error or one of the following: |
| */ |
| #define TAPE_IO_SUCCESS 0 /* request successful */ |
| #define TAPE_IO_PENDING 1 /* request still running */ |
| #define TAPE_IO_RETRY 2 /* retry to current request */ |
| #define TAPE_IO_STOP 3 /* stop the running request */ |
| #define TAPE_IO_LONG_BUSY 4 /* delay the running request */ |
| |
| /* Char Frontend Data */ |
| struct tape_char_data { |
| struct idal_buffer *idal_buf; /* idal buffer for user char data */ |
| int block_size; /* of size block_size. */ |
| }; |
| |
| /* Tape Info */ |
| struct tape_device { |
| /* entry in tape_device_list */ |
| struct list_head node; |
| |
| int cdev_id; |
| struct ccw_device * cdev; |
| struct tape_class_device * nt; |
| struct tape_class_device * rt; |
| |
| /* Device mutex to serialize tape commands. */ |
| struct mutex mutex; |
| |
| /* Device discipline information. */ |
| struct tape_discipline * discipline; |
| void * discdata; |
| |
| /* Generic status flags */ |
| long tape_generic_status; |
| |
| /* Device state information. */ |
| wait_queue_head_t state_change_wq; |
| enum tape_state tape_state; |
| enum tape_medium_state medium_state; |
| unsigned char * modeset_byte; |
| |
| /* Reference count. */ |
| atomic_t ref_count; |
| |
| /* Request queue. */ |
| struct list_head req_queue; |
| |
| /* Request wait queue. */ |
| wait_queue_head_t wait_queue; |
| |
| /* Each tape device has (currently) two minor numbers. */ |
| int first_minor; |
| |
| /* Number of tapemarks required for correct termination. */ |
| int required_tapemarks; |
| |
| /* Block ID of the BOF */ |
| unsigned int bof; |
| |
| /* Character device frontend data */ |
| struct tape_char_data char_data; |
| |
| /* Function to start or stop the next request later. */ |
| struct delayed_work tape_dnr; |
| |
| /* Timer for long busy */ |
| struct timer_list lb_timeout; |
| |
| }; |
| |
| /* Externals from tape_core.c */ |
| extern struct tape_request *tape_alloc_request(int cplength, int datasize); |
| extern void tape_free_request(struct tape_request *); |
| extern int tape_do_io(struct tape_device *, struct tape_request *); |
| extern int tape_do_io_async(struct tape_device *, struct tape_request *); |
| extern int tape_do_io_interruptible(struct tape_device *, struct tape_request *); |
| extern int tape_cancel_io(struct tape_device *, struct tape_request *); |
| void tape_hotplug_event(struct tape_device *, int major, int action); |
| |
| static inline int |
| tape_do_io_free(struct tape_device *device, struct tape_request *request) |
| { |
| int rc; |
| |
| rc = tape_do_io(device, request); |
| tape_free_request(request); |
| return rc; |
| } |
| |
| static inline void |
| tape_do_io_async_free(struct tape_device *device, struct tape_request *request) |
| { |
| request->callback = (void *) tape_free_request; |
| request->callback_data = NULL; |
| tape_do_io_async(device, request); |
| } |
| |
| extern int tape_oper_handler(int irq, int status); |
| extern void tape_noper_handler(int irq, int status); |
| extern int tape_open(struct tape_device *); |
| extern int tape_release(struct tape_device *); |
| extern int tape_mtop(struct tape_device *, int, int); |
| extern void tape_state_set(struct tape_device *, enum tape_state); |
| |
| extern int tape_generic_online(struct tape_device *, struct tape_discipline *); |
| extern int tape_generic_offline(struct ccw_device *); |
| extern int tape_generic_pm_suspend(struct ccw_device *); |
| |
| /* Externals from tape_devmap.c */ |
| extern int tape_generic_probe(struct ccw_device *); |
| extern void tape_generic_remove(struct ccw_device *); |
| |
| extern struct tape_device *tape_find_device(int devindex); |
| extern struct tape_device *tape_get_device(struct tape_device *); |
| extern void tape_put_device(struct tape_device *); |
| |
| /* Externals from tape_char.c */ |
| extern int tapechar_init(void); |
| extern void tapechar_exit(void); |
| extern int tapechar_setup_device(struct tape_device *); |
| extern void tapechar_cleanup_device(struct tape_device *); |
| |
| /* tape initialisation functions */ |
| #ifdef CONFIG_PROC_FS |
| extern void tape_proc_init (void); |
| extern void tape_proc_cleanup (void); |
| #else |
| static inline void tape_proc_init (void) {;} |
| static inline void tape_proc_cleanup (void) {;} |
| #endif |
| |
| /* a function for dumping device sense info */ |
| extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *, |
| struct irb *); |
| |
| /* functions for handling the status of a device */ |
| extern void tape_med_state_set(struct tape_device *, enum tape_medium_state); |
| |
| /* The debug area */ |
| extern debug_info_t *TAPE_DBF_AREA; |
| |
| /* functions for building ccws */ |
| static inline struct ccw1 * |
| tape_ccw_cc(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda) |
| { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = CCW_FLAG_CC; |
| ccw->count = memsize; |
| ccw->cda = (__u32)(addr_t) cda; |
| return ccw + 1; |
| } |
| |
| static inline struct ccw1 * |
| tape_ccw_end(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda) |
| { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = 0; |
| ccw->count = memsize; |
| ccw->cda = (__u32)(addr_t) cda; |
| return ccw + 1; |
| } |
| |
| static inline struct ccw1 * |
| tape_ccw_cmd(struct ccw1 *ccw, __u8 cmd_code) |
| { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = 0; |
| ccw->count = 0; |
| ccw->cda = (__u32)(addr_t) &ccw->cmd_code; |
| return ccw + 1; |
| } |
| |
| static inline struct ccw1 * |
| tape_ccw_repeat(struct ccw1 *ccw, __u8 cmd_code, int count) |
| { |
| while (count-- > 0) { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = CCW_FLAG_CC; |
| ccw->count = 0; |
| ccw->cda = (__u32)(addr_t) &ccw->cmd_code; |
| ccw++; |
| } |
| return ccw; |
| } |
| |
| static inline struct ccw1 * |
| tape_ccw_cc_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal) |
| { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = CCW_FLAG_CC; |
| idal_buffer_set_cda(idal, ccw); |
| return ccw++; |
| } |
| |
| static inline struct ccw1 * |
| tape_ccw_end_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal) |
| { |
| ccw->cmd_code = cmd_code; |
| ccw->flags = 0; |
| idal_buffer_set_cda(idal, ccw); |
| return ccw++; |
| } |
| |
| /* Global vars */ |
| extern const char *tape_state_verbose[]; |
| extern const char *tape_op_verbose[]; |
| |
| #endif /* for ifdef tape.h */ |