| /* |
| * Marvell Wireless LAN device driver: station RX data handling |
| * |
| * Copyright (C) 2011, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include "decl.h" |
| #include "ioctl.h" |
| #include "util.h" |
| #include "fw.h" |
| #include "main.h" |
| #include "11n_aggr.h" |
| #include "11n_rxreorder.h" |
| |
| /* |
| * This function processes the received packet and forwards it |
| * to kernel/upper layer. |
| * |
| * This function parses through the received packet and determines |
| * if it is a debug packet or normal packet. |
| * |
| * For non-debug packets, the function chops off unnecessary leading |
| * header bytes, reconstructs the packet as an ethernet frame or |
| * 802.2/llc/snap frame as required, and sends it to kernel/upper layer. |
| * |
| * The completion callback is called after processing in complete. |
| */ |
| int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| int ret; |
| struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); |
| struct mwifiex_private *priv = |
| mwifiex_get_priv_by_id(adapter, rx_info->bss_num, |
| rx_info->bss_type); |
| struct rx_packet_hdr *rx_pkt_hdr; |
| struct rxpd *local_rx_pd; |
| int hdr_chop; |
| struct ethhdr *eth_hdr; |
| u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; |
| |
| local_rx_pd = (struct rxpd *) (skb->data); |
| |
| rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + |
| local_rx_pd->rx_pkt_offset); |
| |
| if (!memcmp(&rx_pkt_hdr->rfc1042_hdr, |
| rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) { |
| /* |
| * Replace the 803 header and rfc1042 header (llc/snap) with an |
| * EthernetII header, keep the src/dst and snap_type |
| * (ethertype). |
| * The firmware only passes up SNAP frames converting |
| * all RX Data from 802.11 to 802.2/LLC/SNAP frames. |
| * To create the Ethernet II, just move the src, dst address |
| * right before the snap_type. |
| */ |
| eth_hdr = (struct ethhdr *) |
| ((u8 *) &rx_pkt_hdr->eth803_hdr |
| + sizeof(rx_pkt_hdr->eth803_hdr) + |
| sizeof(rx_pkt_hdr->rfc1042_hdr) |
| - sizeof(rx_pkt_hdr->eth803_hdr.h_dest) |
| - sizeof(rx_pkt_hdr->eth803_hdr.h_source) |
| - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type)); |
| |
| memcpy(eth_hdr->h_source, rx_pkt_hdr->eth803_hdr.h_source, |
| sizeof(eth_hdr->h_source)); |
| memcpy(eth_hdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest, |
| sizeof(eth_hdr->h_dest)); |
| |
| /* Chop off the rxpd + the excess memory from the 802.2/llc/snap |
| header that was removed. */ |
| hdr_chop = (u8 *) eth_hdr - (u8 *) local_rx_pd; |
| } else { |
| /* Chop off the rxpd */ |
| hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr - |
| (u8 *) local_rx_pd; |
| } |
| |
| /* Chop off the leading header bytes so the it points to the start of |
| either the reconstructed EthII frame or the 802.2/llc/snap frame */ |
| skb_pull(skb, hdr_chop); |
| |
| priv->rxpd_rate = local_rx_pd->rx_rate; |
| |
| priv->rxpd_htinfo = local_rx_pd->ht_info; |
| |
| ret = mwifiex_recv_packet(adapter, skb); |
| if (ret == -1) |
| dev_err(adapter->dev, "recv packet failed\n"); |
| |
| return ret; |
| } |
| |
| /* |
| * This function processes the received buffer. |
| * |
| * The function looks into the RxPD and performs sanity tests on the |
| * received buffer to ensure its a valid packet, before processing it |
| * further. If the packet is determined to be aggregated, it is |
| * de-aggregated accordingly. Non-unicast packets are sent directly to |
| * the kernel/upper layers. Unicast packets are handed over to the |
| * Rx reordering routine if 11n is enabled. |
| * |
| * The completion callback is called after processing in complete. |
| */ |
| int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| int ret = 0; |
| struct rxpd *local_rx_pd; |
| struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); |
| struct rx_packet_hdr *rx_pkt_hdr; |
| u8 ta[ETH_ALEN]; |
| u16 rx_pkt_type; |
| struct mwifiex_private *priv = |
| mwifiex_get_priv_by_id(adapter, rx_info->bss_num, |
| rx_info->bss_type); |
| |
| if (!priv) |
| return -1; |
| |
| local_rx_pd = (struct rxpd *) (skb->data); |
| rx_pkt_type = local_rx_pd->rx_pkt_type; |
| |
| rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + |
| local_rx_pd->rx_pkt_offset); |
| |
| if ((local_rx_pd->rx_pkt_offset + local_rx_pd->rx_pkt_length) > |
| (u16) skb->len) { |
| dev_err(adapter->dev, "wrong rx packet: len=%d," |
| " rx_pkt_offset=%d, rx_pkt_length=%d\n", skb->len, |
| local_rx_pd->rx_pkt_offset, local_rx_pd->rx_pkt_length); |
| priv->stats.rx_dropped++; |
| |
| if (adapter->if_ops.data_complete) |
| adapter->if_ops.data_complete(adapter, skb); |
| else |
| dev_kfree_skb_any(skb); |
| |
| return ret; |
| } |
| |
| if (local_rx_pd->rx_pkt_type == PKT_TYPE_AMSDU) { |
| struct sk_buff_head list; |
| struct sk_buff *rx_skb; |
| |
| __skb_queue_head_init(&list); |
| |
| skb_pull(skb, local_rx_pd->rx_pkt_offset); |
| skb_trim(skb, local_rx_pd->rx_pkt_length); |
| |
| ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr, |
| priv->wdev->iftype, 0, false); |
| |
| while (!skb_queue_empty(&list)) { |
| rx_skb = __skb_dequeue(&list); |
| ret = mwifiex_recv_packet(adapter, rx_skb); |
| if (ret == -1) |
| dev_err(adapter->dev, "Rx of A-MSDU failed"); |
| } |
| return 0; |
| } |
| |
| /* |
| * If the packet is not an unicast packet then send the packet |
| * directly to os. Don't pass thru rx reordering |
| */ |
| if (!IS_11N_ENABLED(priv) || |
| memcmp(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN)) { |
| mwifiex_process_rx_packet(adapter, skb); |
| return ret; |
| } |
| |
| if (mwifiex_queuing_ra_based(priv)) { |
| memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN); |
| } else { |
| if (rx_pkt_type != PKT_TYPE_BAR) |
| priv->rx_seq[local_rx_pd->priority] = |
| local_rx_pd->seq_num; |
| memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address, |
| ETH_ALEN); |
| } |
| |
| /* Reorder and send to OS */ |
| ret = mwifiex_11n_rx_reorder_pkt(priv, local_rx_pd->seq_num, |
| local_rx_pd->priority, ta, |
| (u8) local_rx_pd->rx_pkt_type, |
| skb); |
| |
| if (ret || (rx_pkt_type == PKT_TYPE_BAR)) { |
| if (adapter->if_ops.data_complete) |
| adapter->if_ops.data_complete(adapter, skb); |
| else |
| dev_kfree_skb_any(skb); |
| } |
| |
| if (ret) |
| priv->stats.rx_dropped++; |
| |
| return ret; |
| } |